Let's say that we have to insert a range R between to others A and B
with A->first <= R->first <= B->first. We have to remove the ranges
which are overlapsed by R during. This was correctly done when
the intersection between A and R was not empty, but not when the
intersection between R and B was not empty. If this latter case
after having inserting a new range R we set <new> variable as the
node to consider to check the overlaping between R and its following
ranges.
Make depends qc_new_isecs() only on quic_conn struct initialization only (no more
dependency on connection struct initialization) to be able to run it as soon as
the quic_conn struct is initialized (from the I/O handler) before running ->accept()
quic proto callback.
We remove the header protection of packet only for connection with already
initialized context. This latter keep traces of the connection state.
Furthermore, we enqueue the first Initial packet for a new connection
after having completely parsed the packet so that to not start the accept
process for nothing.
Move the QUIC conn (struct quic_conn) initialization from quic_sock_accept_conn()
to qc_lstnr_pkt_rcv() as this is done for the server part.
Move the timer initialization to ->start xprt callback to ensure the connection
context is done : it is initialized by the ->accept callback which may be run
by another thread than the one for the I/O handler which also run ->start.
Move the call to SSL_set_quic_transport_params() from the listener I/O dgram
handler to the ->init() callback of the xprt (qc_conn_init()) which initializes
its context where is stored the SSL context itself, needed by
SSL_set_quic_transport_params(). Furthermore this is already what is done for the
server counterpart of ->init() QUIC xprt callback. As the ->init() may be run
by another thread than the one for the I/O handler, the xprt context could
not be potentially already initialized before calling SSL_set_quic_transport_params()
from the I/O handler.
The name the maximum packet size transport parameter was ambiguous and replaced
by maximum UDP payload size. Our code would be also ambiguous if it does not
reflect this change.
Set the streams transport parameters which could not be initialized because they
were not available during initializations. Indeed, the streams transport parameters
are provided by the peer during the handshake.
Really signal the caller that ->accept() has failed if the session could not
be initialized because conn_complete_session() has failed. This is the case
if the mux could not be initialized too.
When it fails an ->accept() must returns -1 in case of resource shortage.
Deactivate the action of this callback at this time. I am not sure
we will keep it for QUIC as it does not really make sense for QUIC:
the QUIC packet are already recvfrom()'ed by the low level I/O handler
used for all the connections.
This file has been derived from mux_h2.c removing all h2 parts. At
QUIC mux layer, there must not be any reference to http. This will be the
responsability of the application layer (h3) to open streams handled by the mux.
We move ->params transport parameters to ->rx.params. They are the
transport parameters which will be sent to the peer, and used for
the endpoint flow control. So, they will be used to received packets
from the peer (RX part).
Also move ->rx_tps transport parameters to ->tx.params. They are the
transport parameter which are sent by the peer, and used to respect
its flow control limits. So, they will be used when sending packets
to the peer (TX part).
This bug may occur when displaying streams traces. It came with this commit:
242fb1b63 ("MINOR: quic: Drop packets with STREAM frames with wrong direction.").
An optimization was brought in commit 5064ab6a9 ("OPTIM: lb-leastconn:
do not unlink the server if it did not change") to avoid locking the
server just to discover it did not move. However a mistake was made
because the operation involves a divide with a value that is read
outside of its usual lock, which makes it possible to be zero at the
exact moment we watch it if another thread takes the server down under
the lbprm lock, resulting in a divide by zero.
Therefore we must check that the value is not null there.
This must be backported to 2.4.
The "process" directive on "bind" lines becomes quite confusing considering
that the only allowed value is 1 for the process, and that threads are
optional and come after the mandatory "1/".
Let's introduce a new "thread" directive to directly configure thread
numbers, and mark "process" as deprecated. Now "process" will emit a
warning and will suggest how to be replaced with "thread" instead.
The doc was updated accordingly (mostly a copy-paste of the previous
description which was already up to date).
This is marked as MEDIUM as it will impact users having "zero-warning"
and "process" specified.
Enable the 'slowstart' keyword for dynamic servers. The slowstart task
is allocated in 'add server' handler if slowstart is used.
As the server is created in disabled state, there is no need to start
the task. The slowstart task will be automatically started on the first
'enable server' invocation.
'slowstart' can be used without check on a server, with the CLI handlers
'enable/disable server'. Move the code to initialize and start the
slowstart task outside of check.c.
This change will also be reused to enable slowstart for dynamic servers.
Allow to use the check related keywords defined in server.c. These
keywords can be enabled now that checks have been implemented for
dynamic servers.
Here is the list of the new keywords supported :
- error-limit
- observe
- on-error
- on-marked-down
- on-marked-up
Allow to configure ssl support for dynamic server checks independently
of the ssl server configuration. This is done via the keyword
"check-ssl". Also enable to configure the sni/alpn used for the check
via "check-sni/alpn".
The ssl context is not initialized for a dynamic server, even if there
is a tcpcheck rule which uses ssl on the related backed. This will cause
the check initialization to failed with the message :
"Out of memory when initializing an SSL connection"
This can be reproduced by having the following config in the backend :
option tcp-check
tcp-check connect ssl
and create a dynamic server with check activated and a ca-file.
Fix this by calling the prepare_srv xprt callback when the proxy options
PR_O_TCPCKH_SSL is set.
Check support for dynamic servers has been merged in the current branch.
No backport needed.
Test that checks have been configured on the server before enabling via
the 'enable health' CLI. This mirrors the 'enable agent' command.
Without this, a user can use the command on the server without checks.
This leaves the server in an undefined state. Notably, the stat page
reports the server in check transition.
This condition was left on the following reorg commit.
2c04eda8b58636ad2ae44e42b1f50f3b5a24a642
REORG: cli: move "{enable|disable} health" to server.c
This should be backported up to 1.8.
The issue is introduced with the commit c41d8bd65 ("CLEANUP: flt-trace:
Remove unused random-parsing option").
This must be backported everywhere the above commit is.
appctx_new() is exclusively called with tid_bit and it only uses the
mask to pass it to the accompanying task. There is no point requiring
the caller to know about a mask there, nor is there any point in
creating an applet outside of the context of its own thread anyway.
Let's drop this and pass tid_bit to task_new() directly.
Ilya reports in GH #1392 that clang 13 complains about totlen being
calculated and not used in fd_write_frag_line(), which is true. It's
a leftover of some older code.
Ilya reports in GH #1392 that clang 13 complains about a flag being added
to the "flags" parameter without being used later. That's generic code
that was shared from TCP but we can indeed drop this flag since it's used
for TFO which we don't have in socketpairs.
The CLI's payload parser is over-complicated and as such contains more
bugs than needed. One of them is that it uses strstr() to find the
ending tag, ignoring spaces before it, while the argument locator
creates a new arg on each space, without checking if the end of the
word appears past the previously found end. This results in "<<" being
considered as the start of a new argument if preceeded by more than
one space, and the payload being damaged with a \0 inserted at the
first space or tab.
Let's make an easily backportable fix for now. This fix makes sure that
the trailing zero from the first line is properly kept after '<<' and
that the end tag is looked for only as an isolated argument and nothing
else. This also gets rid of the unsuitable strstr() call and now makes
sure that strcspn() will not return elements that are found in the
payload.
For the long term the loop must be rewritten to get rid of those
unsuitable strcspn() and strstr() calls which work past each other, and
the cli_parse_request() function should be split into a tokenizer and
an executor that are used from the caller instead of letting the caller
play games with what it finds there.
This should be backported wherever CLI payload is supported, i.e. 2.0+.
Move the code to allocate/free the mux cleanup task outside of the polling
loop. A new thread_alloc/free handler is registered for this in
connection.c.
This has the benefit to clean up the polling loop code. And as another
benefit, if the task allocation fails, the handler can report an error
to exit the haproxy process. This prevents a potential null pointer
dereferencing.
This should fix the github issue #1389.
This must be backported up to 2.4.
When the LDAP response is parsed, the message length is not properly
decoded. While it works for LDAP servers encoding it on 1 byte, it does not
work for those using a multi-bytes encoding. Among others, Active Directory
servers seems to encode messages or elements length on 4 bytes.
In this patch, we only handle length of BindResponse messages encoded on 1,
2 or 4 bytes. In theory, it may be encoded on any bytes number less than 127
bytes. But it is useless to make this part too complex. It should be ok this
way.
This patch should fix the issue #1390. It should be backported to all stable
versions. While it should be easy to backport it as far as 2.2, the patch
will have to be totally rewritten for lower versions.
Ilya reported in issue #1391 a build warning on Fedora about mallinfo()
being deprecated in favor of mallinfo2() since glibc-2.33. Let's add
support for it. This should be backported where the following commit is
also backported: 157e39303 ("MINOR: pools: automatically disable
malloc_trim() with external allocators").
If an error was already reported on the H1 connection, pending input data
must not be (re)evaluated in h1_process(). Otherwise an unexpected internal
error will be reported, in addition of the first one. And on some
conditions, this may generate an infinite loop because the mux tries to send
an internal error but it fails to do so thus it loops to retry.
This patch should fix the issue #1356. It must be backported to 2.4.
The "unresolved" variable is unused since commit 9fa0df5 ("BUG/MINOR: acl:
Fix freeing of expr->smp in prune_acl_expr").
This patch should fix the issue #1359.
