Fix the dts to match board's reference design:
- update vddio_boot regulator to 3.3v (Wi-Fi SDIO module)
- add vccq_1v8 regulator with 1.8v for eMMC SDIO
In the first revision of JetHub D1 the vccq_1v8 regulator was 3.3v.
All installed eMMC modules were tested to work in HS200 mode at 3.3v
supply voltage. In the next revisions of the device eMMC will be
powered with 1.8v according to the standard.
* Add initial series patches for sunxi-5.16
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Now all patches are applied to the v5.16 kernel without errors
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Handle an exception if the initial tag is the top of the branch.
Remove the handling of the old exception.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* sunxi64_common.inc: Fix for 5.16
* sunxi-common.inc: Fix for 5.16
* Revert debug for EDGE: KERNEL_VERSION_LEVEL to "5.15"
* Add new patches from megous and switch to v5.16.1
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* waiter_local_repo: Fixed comment
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Several improvements for RPi builds
- attach to RPi kernels
- current (ubuntu) -> legacy
- current -> 5.10.y, edge, 5.15.y
* Move current Rpi to 5.15.y and edge to 5.16.y
* Sync kernel config with radxa and remove packaging patch
* Merge the rockchip64 legacy config as well
* Lower priority of EFI partitioning against DOS partitioning which is used by Armbian
Co-authored-by: Catalin Toda <catalinii@yahoo.com>
* JetHome: Update u-boot patches: fix emmc work on JetHub D1
* JetHome: update kernel patches with last updates for JetHub devices.
* JetHome: Update Bluetooth init script to more stable start.
* Remove the garbage from the `install.log` file
You cannot use `--info=progress2` for the `rsync`
command when all output is sent to a file.
This creates a large garbage file.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Changes megous reverse commit. Just disable the patch
commit bd592ec43b76b298be29126e667850113b84376d (tag: orange-pi-5.15-20211125-1352)
Author: Ondrej Jirman <megous@megous.com>
Date: Thu Nov 25 13:51:59 2021 +0100
Revert "rtw88: Add more channels"
This reverts commit cb1e3839822d4f782a9af6c27568540414093ba6.
* Revert "Calculate patches changes only on first level since this fails when including subfolder. Bug in sort. Needs to be reworked once"
Return `megous` patches
This reverts commit 2eae831889.
* Sunxi 5.10: Fix ISO C90 forbids mixed declarations and code
* extensions framework (née "fragments")
- this should actually change nothing at this point, just add capabilities
- the framework is implemented in lib/extensions.sh
- the "if function x exists then call x" replaced with call_extension_method()
- +inline documentation
- +compatibility names
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions framework; meta-extensions: auto-docs and sample extension gen
- 2 extensions dealing with extensibility itself
- detect-unused-extensions: shows which extensions are enabled, but never called.
- gen-sample-extension-docs: generates a sample empty extension & Markdown documentation for extensions
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* new extension methods and features via config variables in core Armbian
- `SKIP_EXTERNAL_TOOLCHAINS=yes` - does not download or use any linaro toolchains, only build host-installed ones
- `SKIP_BOOTSPLASH=yes` - does not patch kernel for splash file
- `EXTRA_BSP_NAME=xyz` - allows for BSP variants, useful for when extensions modify the BSP
- `EXTRA_ROOTFS_MIB_SIZE=x` - add x mib's to rootfs size, for use with very small images
- `KERNEL_EXTRA_TARGETS` - what extra targets to make kernel for, default to "modules dtbs"
- `BOOTCONFIG=none` - does not build nor install u-boot; also doesn't handle bootscripts et al
- `unset KERNELSOURCE` - does not build nor install kernel, nor build initrd, nor build nor install firmware
- `ARMHF_ARCH=skip` - does not add armhf to apt/dpkg, thus pure arm64
- `SKIP_ARMBIAN_REPO=yes` - results in armbian.list.disabled in the final image
- define `APT_EXTRA_DIST_PARAMS` with apt-cacher-ng options and use it for `PACKAGE_LIST_INSTALL/REMOVE` et al
- initial support for targeting x86/amd64 UEFI and BIOS
- some do's/don'ts for x86/amd64, like a different `UBUNTU_MIRROR` default
- GPT/EFI(ESP) partitions (fat, `UEFISIZE=256` to enable, mount `UEFI_MOUNT_POINT=/boot/efi`, first on disk but ends
up at `$uefipart`=15)
- GPT/BIOS partitions (fat, `BIOSSIZE=1` to enable, second on disk but ends up at partition 14)
- `UEFI_FS_LABEL="armbiefi"` - to set the FAT label for the EFI partition, visible in Win/Mac
- hard-requires gdisk package host-side
- add add_host_dependencies() extension method; fill `EXTRA_BUILD_DEPS="pkg pkg2"` to install to host before toolchains
download
- add pre_prepare_partitions() extension method, for custom partition size calculations
- add create_partition_table() extension method, used to do full-custom partitioning if `USE_HOOK_FOR_PARTITION=yes`
- add post_create_partitions() extension method, mostly for easy debugging
- add post_write_sdcard() extension method, where you can also set `SKIP_VERIFY=yes` to skip sdcard verification
- add post_install_kernel_debs() extension method.
- multiple fixes to bsp to avoid spurious errors when files are not where it expects
- v4: detect `update-initramfs` failure and abort build with useful message if it does
- v4: show useful stacktrace in `exit_with_error`
- if `ERROR_DEBUG_SHELL=yes`, drop into a shell before unmounting/deleting everything, so we can inspect what went wrong
- v4: display a message before `apt-get remove PACKAGE_LIST_BOARD_REMOVE` packages, so any errors while removing are easy to understand
- v4: preserve kernel .config's dates when copying
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions framework; refactor tool fetching/building into extensions
- a few examples of core refactoring using extensions
- sunxi-tools extension, enabled by 2 different sunxi family includes ("reuse" example)
- marvel-tools extension, enabled by 2 different mvebu family includes
- rkbin-tools extension, enabled by rockship64_common family include
- amlogic-fip/c2-blobs stuff refactored directly into meson64_common.inc ("single-use" example)
- removed the 'testings' fetch_from_repo completely since not used anywhere.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* .wip's for UEFI arm64 and UEFI/BIOS x86 via new GRUB extension
- v3: added `growroot`-awareness to `armbian-resize-filesystem`
- the partition-growing part of `armbian-resize-filesystem` does not deal correctly with the UEFI layout
- `growroot` is installed on UEFI images by default, that handles growing partition during initramfs
- now `armbian-resize-filesystem` handles `resize2fs` only, and works.
- v4: reworked UEFI board/family/include structure:
- use Distro's `linux-generic` kernel only for `current`
- `edge` now builds it's own pure-mainline `5.15.y` kernel, for both x86 and arm64
- `.config` taken from Ubuntu, probably needs tuning for EXTRAWIFI=yes et al
- v4: introduce `SKIP_KERNEL_SYMLINK=yes`, tested in `builddeb`
- to avoid symlinking kernel; u-boot likes it, but grub and flash-kernel hates it
- v5: many fixes
- v7: more small fixes.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* .wip for the RaspberryPi 4B via new flash-kernel extension
- this does not build it's own kernel "yet", but uses default linux-raspi kernel from Ubuntu
- flash-kernel is not really a bootloader
- it just prepares kernel et al a FAT partition for booting by the RPi4b bootloader
- flash-kernel is standard Debian package, but has only been tested on Ubuntu releases
- it is really only known-working since Hirsute release.
- Debian's rpi kernel is armhf only, so out of scope here, at least until we add source-built kernels.
- v3: fixed focal rootfs build. untested.
- v3: better variable names, preparing for source-built kernel.
- v5: new edge build with pure mainline kernel.
- v6: many fixes and some hacks for packaging and layout, also firmware (using Ubuntu's)
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Added first patch to edge x86 related to wifi drivers
* extensions: leave hostapd alone; remove hackish ext; block reentrancy
- package-list-utils does not belong in this PR
- grub or bcm2711 is not the place to remove hostapd
- block recursive enable_extension() calls, for now.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* gen-sample-extension-docs: fix: avoid counter in generated sample
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: dependencies: enable_extension() in extensions with a stack
- and better stacktraces, I hope
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Remove code from package list since we don't have it in repository
Adjust kernel config to disable driver that needs further polishing.
* Allow amd64 to build the same desktops as aarch64. We only have this limit for armhf, where some desktops don't work
* amd64: allow building amd64 on aarch64 with system toolchain
- conditionally add gcc-x86-64-linux-gnu to hostdeps
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* add libelf-dev directly to hostdeps (and Dockerfile), remove extension
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* packaging: remove SKIP_KERNEL_SYMLINK hack, fix the root cause
- which was the missing $image_name for non-arm64 & non-arm, so: x86 for example
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* grub: really obliterate u-boot stuff from BSP
- for now. soon we'll refactor u-boot so not have to do this
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* flash-kernel: really obliterate u-boot stuff from BSP
- for now. soon we'll refactor u-boot so not have to do this
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: add host_dependencies_ready() hook
- this passes FINAL_HOST_DEPS containing all hostdeps for the run after they're installed
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Add verification functions for correct selection.
* If UEFI Skip symlink creation
* Do not create dtb package for amd64
* Skip scripts folder cleaning if build process native.
Skip creating postinst prerm scripts for headers.
* Skip applying headers-debian-byteshift.patch if build native
* Fix architecture syntax as x86_64
* Revert "amd64: allow building amd64 on aarch64 with system toolchain"
This reverts commit 0c5ee20bb1.
* Compare architectures before starting compilation.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* extensions: cleanups after fixes by the-Going
- packaging:
- there is _no need_ anymore for the symlink hack, CONFIG_EFI or no. But check is great, see below
- it's not `amd64` that has no DTB's, it's all UEFI, thus: `is_enabled CONFIG_EFI`, thanks!
- Explicitly disallow "reverse cross compile" in amd64.conf.
- whitespace-only-deletions: revert. we shall shellfmt the whole thing one day, but not today.
- fix a few syntax warnings in newly introduced code (floating `$ARCH` vs `"${ARCH}`) - blame shellcheck
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* packaging: fix: turns out a lot of boards have CONFIG_EFI=y, can't use that for dtb/no-dtb decision.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* grub: remove debug
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* firmware: allow installing `armbian-firmware-full`; make it really full
- can now use `BOARD_FIRMWARE_INSTALL="-full"` to install full firmware for the board. enable for UEFI.
- don't rely on KERNELSOURCE for firmware-related decisions. introduce `INSTALL_ARMBIAN_FIRMWARE` which defaults to `yes`
- rpi4b/flash-kernel: disable Armbian firmware; we need linux-firmware-raspi2, which conflicts.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: log to /${LOG_SUBPATH}/ instead of fixed /debug/
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: introduce cleanup_extension_manager() called by build-all-ng's unset_all()
- to reset/unset everything done by the the initializer, so build can run again
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: remove 'global' logging, for use with build_all_ng
- enable_extensions() will have to live on without logging to file. it's just too early.
- now init EXTENSION_MANAGER_TMP_DIR in initialize_extension_manager()
- now init EXTENSION_MANAGER_LOG_FILE in initialize_extension_manager()
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: build-all-ng.sh bugfix due to extension's debug to stdout
- extensions (among other things) can produce output to stdout when activated
- fix: check_hash() produced "idential" (sic, now changed to IDENTICAL) to stdout as a trigger
- debugging output got mixed with "idential", rendering hash cache void for families that used extensions
- eg: sunxi, others
- fix is to send stdout to the bitbucket when sourcing the board & arch config files
- proper fix would be stop using stdout in this case and use return code for check_hash()
- one day soon
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Add CI build targets
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Co-authored-by: The-going <48602507+The-going@users.noreply.github.com>
All warning:
debug> grep warning: compilation.log | wc -l
152
A large number of garbage warnings:
debug> grep warning: compilation.log | grep IEEE80211_MAX_AMPDU_BUF | wc -l
103
After v4.19 linux kernel, this definition is not required.
Check:
list="$(find drivers/net/wireless/realtek/ -type f)"
for f in $list;do awk -v f=$f '/IEEE80211_MAX_AMPDU_BUF/{print f}' $f;done
drivers/net/wireless/realtek/rtlwifi/base.c
drivers/net/wireless/realtek/rtl8723cs/include/wifi.h
Only one drivers/net/wireless/realtek/rtlwifi/base.c file uses
the definition IEEE80211_MAX_AMPDU_BUF_HT.
or
See `git log -p b8042b3da925f390c1482b -3` command in
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* Rework patches for sunxi 5.15.4
* Rework patches sunxi for 5.15.5
* Kernel switch tag=v5.15.5 for sunxi EDGE
* Temporarily disabled, requires rework.
drivers/clk/sunxi-ng/sun8i-de33.c: In function ‘sunxi_de33_clk_probe’:
drivers/clk/sunxi-ng/sun8i-de33.c:155:8:
error: implicit declaration of function ‘sunxi_ccu_probe’;
did you mean ‘of_sunxi_ccu_probe’? [-Werror=implicit-function-declarati>
ret = sunxi_ccu_probe(pdev->dev.of_node, reg, ccu_desc);
^~~~~~~~~~~~~~~
of_sunxi_ccu_probe
cc1: some warnings being treated as errors
make[3]: *** [scripts/Makefile.build:277:
drivers/clk/sunxi-ng/sun8i-de33.o] Error 1
make[2]: *** [scripts/Makefile.build:540: drivers/clk/sunxi-ng] Error 2
* Correct the comment.
* Add a series of patches for sunxi 5.10
Patches from the repository
https://github.com/megous/linux branches of orange-pi-5.10
* Patches adapted to the kernel version v5.10.81
* Remove unnecessary patches 5.10.19-5.10.75
* Kernel switch tag=v5.10.81 for the current sunxi
* Adjust broken patches, build tested on sunxi and sunxi64
* Remove patch added by mistake
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add new function apply_patch_series
* Apply a series of patches if a series.conf file exists
* Add all megous orange-pi-5.15 branch patches as series
* Add an Exception for version 5.15 for sanxi
* Adjust the switch for sunxi
* Fix megous patches series for v5.15.3
* Switch version to 5.15.3 for sunxi
* Check the exception for 5.15 sunxi
* rework to fix regulator and frequency issues
* rework nanopi-r2s, roc-cc and roc-pc patches to accomodate dmc dtsi changes
* map gpu as cooling device
* fix dmc 600 Mhz opp node min voltage
* imported Rockchip project patches from libreelec
* disable duplicate/unapplicable patches and rework others
* add patches for tinkerboard, miqi and xt-q8l-v10 to enable hevc, hevc_mmu and rga nodes
- starting from Home Assistant OS (HASSOS) setup/patchset, which is stable with pure-mainline
- *huge thanks* to Stefan Agner (@agners) from Home Assistant for his work and help with this
- CONFIG_DRM_MESON=y fixes the order of shutdown callbacks, allowing it to reboot without patches
- this increases the kernel size a bit, due to some dependencies like DRM=y
- remove the shutdown revert patch, allowing other meson64 boards to mainline-reboot
- add fdt/no-map patch fixing the dreaded "SError Interrupt on CPU4" panics that plagued the N2
- move the N2 to mainline u-boot on current (rebased, already done)
- add SPI-enabling DTB variants, which allow writing to SPI NOR flash (and usage instructions in comments)
- add UBOOT_TARGET_MAP and write_uboot_platform_mtd to current, for nand-sata-install to SPI/USB goodness
- remove the UHS-enabling patch, to avoid 1.8v vs 3.3v mess. Make sure to use only A1-rated SD cards as recommended.
- change default cpufreq governor for 24h+ stability
- other patch cleanups:
- move deprecated/non-applying patch to need-check
- remove the HardKernel ODROID-specific reboot driver and DTS patches (odroid-reboot.c) which are now useless.
- remove documentation-only patches (we have enough patches in meson64 without those)
- remove duplicated SAR ADC patches
- remove multiple different and conflicting patches for DTS and emulated-PWM GPIO fan
- now using simple on/off GPIO fan at 30 celsius, unrelated to passive cooling
* remove 0-rever-rk3328.dtsi-.patch
* split rk3328-dtsi-mmc-vdec-usb3-tweaks.patch into different specific patches (sdmmc-ext, mmc-reset, power domains, usb3 resets)
* split rk3328-audio-and-renegade-supplies.patch into specific roc-cc audio and supplies patch and general rk3328 spdif patch
* add "dtsi" infix to rk3328 patches that deal with dtsi files
* add back mali gpu operating points patch
* add workaround against default MAC Address (userland utility bdaddr does not work to set MAC Address as expected)
* enable bits for xt-q8l-v10 board (ap6330/bcm4330 part), switching AP6330 bluetooth to btbcm driver using serdev
facilities to avoid userspace machinery with deprecated hciattach tool, added bits to enable driver support in kernel.
Removed ap6330 bluetooth service from bsp packages, added initramfs-tools hook to include bcm4330b1.hcd firmware in initramfs
* Backporting patch to 5.10 kernel makes sense. Lets do it.
Co-authored-by: iamdrq <iamdrq@qq.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bumping EDGE kernel to 5.14.y
Meson64:
- removing Odroid reboot shutdown patch since its probably not needed anymore
Rockchip64:
- removing Rockpi S. No interest to maintain this any further
- removing PBP suspend. Doesn’t align. Need inspection if some other way was mainstreamed
- temporally removing Orangepi R1
* Re-adding rockpis, pbp suspend, HFLPS170 wifi and cleanup
* Removing deprecated patch, fixing ap6256 wifi
* Re-enable Opi R1 plus, untest
* Add and fix Radxa Zero
* Add support for Radxa Zero
u-boot: new patch based on v2021.04
kernel: use patches sent to kernel list by chewitt
Tested with minimal build and cinnamon desktop:
- SD/eMMC, ok
- USB3, works in USB 2 mode
- HDMI, ok
- WiFi/BT, ok
Signed-off-by: Jack Ma <jack@radxa.com>
* Add build targets
* Cleanup and set min speed to 666000
* Change to WIP target
Support status undetermined
Co-authored-by: Jack Ma <jack@radxa.com>
- fix/dup bootscript, since new u-boot fixed n2_plus to n2-plus variant
- g12b: if n2 and edge, enable new u-boot; include non-SD version as SPI binary; write_uboot_platform_mtd
- Kernel DTS patch to add SPI-flash-enabled DTBs (slower eMMC), produces -spi .dtbs for n2 and n2-plus
- This could also be an overlay, but I dunno overlays.
- SPI+USB3 boot works with "pendrive" storage, untested with cabled/high power USB->SATA or USB->NVMe
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* [ meson64 ] nanopi K2 ethernet fix
Fix NanoPi K2 Ethernet issues
Do some cleanup of the Meson64 folder while at it
* [ Meson64 ] revert accidental delete of C2 audio patch
* [ RK3328 ] boost GPU voltages to avoid starving Memory controller
The RK3328 has the dynamic memory controller and GPU on the same power rail.
Both are able to be dynamically clocked, both have opp tables.
- DMC min voltage: 1.075V
- GPU min voltage: 0.950V
On boards with only the GPU enabled, they memory controller can be under-voltaged.
On boards attempting to use both, the disagreeing opps result in the GPU failing to init
This patch applies a mV range opp to the GPU and fixed opps to the DMC on rk3328-roc-cc
to allow everything to get alongin all possible devfreq situations.
* [ rockchip64 ] clean up disabled patches
* [ rock64 ] add mali supply and remove unused 5V supply
- New Mali opps will keep from starving ram controller
- extra supply was causing dmesg errors.
As it shares enable with another supply and both were marked "always on"
I removed the second. Neither are referenced by any ports/devices.
- add mtd-utils to PACKAGE_LIST_BOARD.
- this should be enough to wipe Petitboot;
- more investigative work and u-boot building is needed for SPI+SATA boot
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Upgrading sunxi and sunxi64 EDGE to 5.13
Both variants tested for building
* Bump imx6 to 5.13.y
Tested
* Bump Jetson nano kernel to 5.13.y
* Move mvebu and mvebu64 edge to 5.13.y
* add DFI driver to provide hardware-based memory controller load
* adapted DRAM Memory Controller driver from rk3328, add necessary headers
* provide device tree overlays to enable DDR3 clock scaling
* adapted rk322x-box to allow DDR speed bin selection to user
* add ipb900 board gpio configuration
* add rtl8723cs driver to linux-current kernel
* use ddrbin v1.10 set to 330 Mhz at boot
* provide overlays for ddr3 at 330, 528, 660 and 800 mhz
* split emmc overlays to enable options by user choice
* modified rk322x-config to support dmc, emmc overlays
* remove optee trust os in favor of rockchip proprietary blob
for dmc functionality
* [ Rockchip64 ] Add Tinker Board 2
Using Mainline ATF/U-boot/Kernel
What works:
- USB (NOT TYPE C)
- PCIe
- LED's
- Ethernet
- HDMI
TODO:
- Type-C (fusb302 stuff)
- Type-C DP
- Regulators for big cores and GPU (sitting at default values now, no DVFS)
- Formware/driver for RTL8822CE
U-boot spits out some trash right after handing off control from SPL to U-Boot,
but doesn't impact boot. Needs looked at.
* [ rockchip64 ] remove unrelated changes to 369ab2decdc5a3c49973d8eeb783c95558dcc41a
* [ rockchip64 ] fix merge mess from symlinks step 1
* [ rockchip64 ] fix merge mess from symlinks step 2
* [ rockchip64 ] fix merge mess from symlinks step 3
* [ rockchip64 ] add asus driver for FAN53200 regulator
* Rename tinkerboard.conf to tinkerboard.wip
set as WIP for merge to trunk. Not ready for images just yet.
* revert rename to wip
wrong tinkerboard
* Rename tinkerboard-2.conf to tinkerboard-2.wip
prepare for merge to trunk. Not ready for images
* Tinker Board 2 GPU and Type-C
Support USB3 over type-C connector. display Port is still non-functional, framework in device tree however
Enable GPU
* Tinkerboard 2 DTS tweaks
Added this round:
Type-C DP now works
thermal sensors enabled (oops)
* Tinker Board 2 update config
-Adds wifi support for the RTL8822
* remove obsolete and broken patch for pine64so u-boot
This prevents the image from being built.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: fix pine64so phy-mode and add yt8511 support
Pine A64-LTS board should have RGMII-TXID mode instead of RGMII-ID (the
Realtek PHY chip's RXID is sometimes broken).
In addition, new Pine A64-LTS v2 board will use YT8511 instead of
RTL8211E, which still works under RGMII-TXID mode.
Backport YT8511 driver and phy-mode change from linux-next.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* Move Jetson patches to right location, add upstream patch
Also add upstream patch for sunxi
* Add upstream patches for Odroidxu4 current
* Add meson64 upstream patches
* Remove unnecessary patch
- this patch works when compiling and installing manually.
- the dtb with the changes is taken from the kernel and not from u-boot, therefore this patch does not work.
* Add enable-audio-codec-bpim2ultra-kernel.patch
- Add patch to enable audio codec in bpi-m2-ultra with h3 compatible
- Built and tested on Armbian Buster with Kernel 5.11.x (edge)
* Bpi-M2-Ultra enable audio on branches
- This finishes enabling the audio codec in the other kernels (5.4 - 5.10 - 5.11)
- Remove patch from u-boot folder (my bug)
- Compiled and tested in their respective kernel with debian buster
* Bpi-M2-Ultra enable audio kernel 5.12
- add patch to kernel 5.12
* Improve sunxi fix-a64-timejump.patch
Current patch still throws BUG:
WARNING: CPU: 2 PID: 31 at drivers/clocksource/arm_arch_timer.c:364 sun50i_a64_read_cntpct_el0+0x2c/0x38
Cause: Timer values are required to be exactly the same, while it may increase in between reads. Seems to happen especially during boot
Timer values are like: x2 : 0000000015014561 - x0 : 0000000015014567
Solution: Normalize timer values and return normalized value.
* Add patch for 5.12.y
Note. Small changes on upstream solution:
GENMASK(9, 0 ... -> GENMASK(8, 0 ...
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bump imx6 edge to 5.12.y
* Bump odroid xu4 edge to 5.12.y
* Bump Jetson nano edge to 5.12.y
* WIP: Bump sunxi to 5.12.y
- create a copy of patches and make a new link
- wireless patches needs adjutement to 5.12
- some patches are still failing
* Adjust wireless patches to build on 5.12.y
* Remove template wireless patch
* Move Espressobin edge to 5.12.y
* Bump mvebu to 5.12
- patch 92-mvebu-gpio-remove-hardcoded-timer-assignment.patch was disabled @heisath
- adjusted wireless driver for 8723ds
* Adjust sunxi / sunxi64 edge to compile
* Fix kernel config for Jetson nano edge
* bump meson64 to 5.12.y
* bump rockchip edge to 5.12.y
* Bump rockchip64 to 5.12.y
* Bump rk322x edge to 5.12.y
@paolosabatino
* Cleanup im6, re-add 5.10.y patches since one is missing in 5.12.y
* Update odroidxu4 edge links
* rk322x: moved rk322x-edge to kernel 5.12, fix overlay compilation, retouched included kernel modules
* Cleanup: remove deprecated config
Co-authored-by: Paolo Sabatino <paolo.sabatino@gmail.com>
* Remove unnecessary patch
- this patch works when compiling and installing manually.
- the dtb with the changes is taken from the kernel and not from u-boot, therefore this patch does not work.
* Add enable-sound-pinecube-kernel.patch
- Add patch to enable audio codec in pinecube with v3s compatible
- Built and tested on Armbian Buster with Kernel 5.11.x (edge)
A long story short:
- patch 'meson64_add_shutdown_function_to_meson_drv.patch' (adds meson_drv_shutdown) added on 04/03/2021
- same patch renamed to '.patch_disabled' on 07/03/2021, since it broke what it was supposed to fix
- kernel 5.10.24 upstream merged similar version of patch, which indeed fixed some khadas stuff, but broke odroid, at least HC4
- now I add this patch to revert upstream.
- also remove the .patch_disabled to avoid confusion
- to say the truth, the HC4 is not reboot-proof, it still hangs sometimes. so this is not the end of it.
- ps: without this revert, HC4 hangs 100% of the time.
- ps2: did not test on edge 5.11 yet, but it looks like the same
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
There are already emmc nodes in rk3288-tinker-s.dts, adding these nodes
to rk3288-tinker.dtsi will cause emmc busy loop on original Tinkerboard.
Signed-off-by: Jack Chen <redchenjs@live.com>
Adds Xilinx Bootgen tools to build environment (alongside sunxi-tools, etc ..)
Adds new SoC family Zynq (7000 series, not MP/UltraScale)
Adds new board Avnet MicroZed
* add device tree overlays to handle boards with power regulation issues,
* fix misconfiguration issues in overlays
* add missing wireguard module for rk322x-current and -edge
* Re-enable network checksum TX offload on rockchip64 family
* Adjust gmac PBL setting for rk3399 legacy to fix network issues with MTU 1500
* Adjust gmac PBL setting for rk3328 in rockchip64-legacy to fix network issues with MTU 1500
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
- Enabled nfc on rk322x-dev and disable on rk322x-current (need further development)
- Tidied up rk322x-current device tree
- enabled nfc rockchip driver enabled in rk322x-dev kernel config
- Enabled EHCI controller in u-boot (added patch for inno-phy, device tree and config bits), better device detection for dwc2 usb otg port
- Removed SPL_FIT_GENERATOR from u-boot configuration, fixed .its file to use binman
- fixed rk322x its file (now includes dtb), reverted u-boot to v2020.10 and changed dev_* into log_debug() calls
* Adjust the RK808 buck step to improve stability
* Adjust vdd_log and enable vdd_center init voltage
For some reason, regulator-init-microvolt property under PMIC does not applied. Set the voltage on board file.
* Explicitly set vdd_log voltage for NanoPi M4V2 - possibly fix stability issues
* Regulator tweaks for NanoPi M4V2
* Add vdd_log to kernel and switch vdd_center back to 900mV
* Switch vdd_center to 0.95
* Make rk80x bucks voltage steps shorter to make the NanoPi M4V2 stable
* Tweak u-boot config for NanoPi M4V2
* Made the rk808 voltage steps configurable and configured 50mV for NanoPi M4V2
* Bump rockchip DEV 32b to 5.11.y
* Move mvebu64 DEV to 5.11.y
* Move Rockchip64 DEV to 5.11.y
Disabling general-rkvdec_nv15.patch - need more attention
* Add Meson DEV / Odroid C1
* Move OdroidXU4 DEV to tobetter's 5.11.y branch
* Bump sunxi DEV to 5.11.y
* Bump mvebu DEV to 5.11.y
* mvebu: Patch kernel to fix SATA write performance regression
Add an upstream patch that fixes SATA write speed regression that
appeared in kernel 5.9.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
* Create 0001-Revert-block-simplify-set_init_blocksize-to-regain-l.patch
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
- for manual/auto control of pwm fan (in the ODROID HC4 for example)
- original is at 8a63de9e2a
- discussion https://patchwork.kernel.org/project/linux-hwmon/patch/20201125163242.GA1264232@paju/
- I'd be much happier with a cooling map in the DTB, but this makes my fans spin correctly via fancontrol
- this affects all of meson64, but only for PWMs that are already exposed to hwmon
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Enable RTC (hym8563) for Station P1 in mainline (renaming DT in process)
* Switch Station P1 to rockchip64
* Fix linking for Station P1 device tree in legacy
* rockchip64: Added XHCI HCD USB TRB ENT quirk
On some xHCI controllers (e.g. Rockchip RK3399/RK3328/RK1808), they need
to enable the ENT flag in the TRB data structure to force xHC to
prefetch the next TRB of a TD.
Enable the quirk on RK3399 through device tree node properties.
Ported from Rockchip Linux 4.19
* add to dev branch
Polished and fixed xt-q8lv-10 rockchip-legacy dtb
Reworked act8846 reboot patch for rockchip-legacy (applies, but not yet working though)
Renamed kernel updated patches in rockchip-legacy directory adding "04-" prefix to make them uniform with existing
This patch (most likely taken from OpenWrt) only applies to ARMADA-XP
hardware, none of which is supported by Armbian.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Sound node recovered from Pull Request #408
Sound node name changed in line with tinkerboard & xt-q8l, cf. issue #1367
Also added missing i2s node, cf. http://rockchip.wikidot.com/hdmi-audio
HDMI audio now confirmed working on Miqi clone, Openhour Chameleon
These patches are for Olimex S3-OLinuXino, which is not yet support by
Armbian.
Remove them to prevent DT node conflict.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
RK3399 maximum clockspeed according to Rockchip is 1.8 GHz for all but a couple variants. Almost all SBC's use 1.8 GHz silicon.
Remove automatic application of extra 2 GHz opp, allow user to select an overlay at their own risk.
RK3399 maximum clockspeed according to Rockchip is 1.8 GHz for all but a couple variants. Almost all SBC's use 1.8 GHz silicon.
Remove automatic application of extra 2 GHz opp, allow user to select an overlay at their own risk.
- curently attached to RC7 as https://github.com/armbian/build/pull/2378
- config derived from current and contains all latest changes
- dirty reboot and eth0 reset hacks are not added and can be added later if still needed (need_check subfolder)
* mvebu-dev: refresh all patches with quilt
Cleaned up based on kernel 5.9.12.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mvebu-current: refresh patches with quilt
Based on kernel version 5.9.12
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mvebu-legacy: refresh patches with quilt
Based on kernel 4.19.161
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mvebu-legacy: remove custom helios4 dts file
This is already added upstream. No need to have it here.
Continued refreshing the other patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Add WIP support for Orangepi Zero 2
* squeeze H616 patches into sunxi-dev
* Update linux-sunxi64-dev.config
* H616: Limit CPUMAX
* Enable DEV only
* H616: remove patches from sunxi-current
* H616: apply new patchset
Co-authored-by: EvilOlaf <werner@armbian.de>
Co-authored-by: Werner <EvilOlaf@users.noreply.github.com>
Some of these get applied at wrong offsets or have fuzz. Fix.
Remove patch 93. It's already upstream. It also has other fixes applied
to it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* sunxi: kernel: current/dev: enable sun6i-csi and disable LL debug on UART0
The former is useful on some boards, e.g. PineCube.
The latter blocks boards that do not utilize UART0 from booting.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: add new family sun8i-v3s
This family is intended for boards with V3/V3s/S3/S3L chips and low
DRAM capacity.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: add PineCube board
This board features Sochip S3 SoC (Allwinner V3 die + co-packaged 128MiB
DRAM), and an OmniVision OV5640 camera is shipped with the board.
Add support for it. It could be used as an IP camera then.
Kernel support is only added to current/dev branch, with dev just using
mainline-merged DT and current using backported DT from 5.10-rc.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: kernel: current/dev: add V3s OHCI/EHCI nodes
These are needed for USB host on V3s boards to work.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
- move Odroid C4 from legacy u-boot toward mainline
- get rid of dirty legacy u-boot code
- get rid of FAT boot partition
- briefly tested
- both kernels can operate with one standard boot script
- add upstream patch and adjust config
- fix console
- don't clock C4 too high by default
The swconfig marvell driver has support for multiple ethernet (CPU)
ports. The upstream DSA driver is limited to one. swconfig is not used
here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Removed default-sample-phase property for base rk322x-box device tree
Enabled spdif out for rk322x-current and -dev flavours
Removed reserved node in device tree, u-boot v2020.10 and OPTEE autoconfigure reserved zones automatically
* add overlay to force RK3399 DW3 USB-C port to host mode
* Per https://forum.armbian.com/topic/13721-nanopc-t4-usb-type-c-port-doesnt-work-with-buster-current-5431/
this is for the NanoPC-T4 as the default from the Device Tree is to set port 0 (USB-C port) to OTG mode,
and the current kernel fusb302 driver is unable to perform autonegotiation to switch the port to host
mode when required.
* As a result, and since most users will want to use this port in host mode, Armbian should provide a new
overlay to do just that.
* rename overlay to a more generic "dwc3-0-host"
A new kernel change (see https://lkml.org/lkml/2020/9/16/1323) introduces
significant instabilities in the RTL8211E Ethernet interface; this patch
reverts that change so that the RTL8211E works reliably again.
A new kernel change (see https://lkml.org/lkml/2020/9/16/1323) introduces
significant instabilities in the RTL8211E Ethernet interface; this patch
reverts that change so that the RTL8211E works reliably again.
* Switched RockPro64 to mainline u-boot
* Enabled rockusb and ums for RockPro64 in mainline u-boot
* Switched RockPro64 u-boot to TPL/SPL/BLOB scenario
* Enabled advanced recovery button support for RockPro64
* Disabled SDR104 mode for RockPro64 in legacy
* helios64: adjust big cpu regulator ramp delay
existing value make clock transisition time large and could causing
random kernel crash.
info: https://forum.odroid.com/viewtopic.php?t=30303
* rk3399-legacy: dts: helios64: remove DMC and DFI
to improve stability
* helios64: rework patch due to dts renaming
The helios64 devicetree was submitted for inclusion in the mainline kernel.
The name used there is rk3399-kobol-helios64, so use the same here
for consistency, to be easily able to boot a mainline kernel without
changing the U-Boot environment and simplify further development.
Pinebook-Pro Support:
suspend to idle via key and lid close
brightness keys
volume control keys
wifi, bluetooth frimware
touchpad tweaks
keyboard config
armbian-hardware-optimization
bootsplash
Co-authored-by: Britt Dodd <britt@reactornet.net>
* PCI: rockchip: support ep-gpio undefined case
Make ep-gpios optional as in rk3399-legacy
* helios64: workaround for JMB585 init
on some boards, the SATA controller failed on PCIE link training and
unusable, if the controller reset by Linux driver.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* rk3399-legacy: rework pcie changes from rockchip64
UPSTREAM: PCI: rockchip: Use normal register bank for config accessors
[1].
UPSTREAM: PCI: rockchip: Advertise 128-byte Read Completion Boundary
support [2].
dts/c: rockpro64: add pcie scan sleep and enable it for rockpro64 [3]
[1]
7ae6008631
[2]
e2ebdd9508
[3]
3cde5c624c
- Chanaged default x.org configuration to disable glamor
- Reintroduce patch to use DRM cursor plane as overlay in rk322x-current and -dev
- Updated wifi patches for kernel 5.8.10
- Bumped rk322x to u-boot v2020.07, removed reserved zones from device trees
- Updated OPTEE to v3.10, using ddrbin v1.10
- Bumped rk322x-current to kernel 5.8.y
- Imported new patches from knaerzche's LibreELEC fork for rk322x-dev (kernel 5.8.y)
- Adjusted existing patches to match changes, updated rk322x-dev kernel config file
- Add default modprobe conf file for esp8089 to force the crystal frequency to 40Mhz for rk322x targets
- Removed ssv6051 firmware packages to move to armbian-firmware repository
- Switching ssv6051-wifi.cfg to /lib/firmware for rk322x-legacy
- Removed P2P interface for esp8089 driver for rk322x-legacy
- Optimized ssv6051 performance: kernel module gains -Os flag, disabled p2p interface, enabled HW crypto for CCMP cipher
- Enabled remote control interface, IR GPIO kernel module and HDMI CEC modules
* Helios64: rework vdd_log and vdd_center
* helios64: Use rockchip binaries for legacy and current branch
Fully open source bootloader only on dev branch
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* rework vdd_log and vdd_center patches
* Supress systemd service warning
* helios64: u-boot: staggered HDD power up
Set the delay to 10s in between turning on the next HDD power rails.
Remove the delay property from kernel device tree, let it only apply to
u-boot
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios64: fault LED as kernel panic indicator
also sync, u-boot dts
* helios64: fix hwmon udev rules
Legacy kernel (LK 4.4) has different class/naming on SoC Temp sensor.
Also fix typo on current/dev udev rules.
* Moving Rockchip 32bit to 5.8.y
xt-q8l-v10 seems to be broken. I did a quick scan but couldn't resolve it. @paolosabatino
* Add wifi patches for 5.8.y
* [rockchip] Fixed xt-q8l-v10 DTS, reworked ath9k driver patch for 5.8.y (#2184)
* Fixed xt-q8l-v10 device tree to work on kernel 5.8.y on rockchip-current and -dev
* Reworked ath9k driver patch to compile on kernel 5.8.y for rockchip-current and -dev
* Add also wifi patches to DEV kernel
Co-authored-by: Paolo <paolo.sabatino@gmail.com>
* Switched rockchip64 curent to kernel 5.8.y
* Enforce CRLF in one of the wifi patches for rockchip64-current
* Removed uneeded wifi patches for rtl8189fs from rockchip64-current
Tested once again on N2/N2+
Note: disabled mesond_vdec module in kernel config since it crashes complete video system when loaded. Need to be added back once stable - or perhaps we need to adjust some parameters?
* Add Rockpi 4C
* Update config/boards/rockpi-4c.conf
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* Change backward compatibility link to B model
* Various changes - tested for building.
- add Radxa overlays
- update naming with mainline
- add Rockpi-E
* Reverting improvements for rockpi legacy and create a link to new DT only
* Copied ROCK Pi 4 device treesplitting patches to dev which was broken
* Add Rockpi 4c targets
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
Adapted rk322x-dev to kernel 5.8.y
Added ssv6x5x driver to legacy kernel, rk322x-config now allows the user to select which driver load at boot
Added esp8089 kernel module, device tree overlay and detection in rk322x-config script
Fixed some indentation
Added reset button binding
Added sdcard debounce
Fixes indentation, added device tree overlay for high-leakage cpus
Added support for bluetooth device tree overlay and realtek systemd service for rk322x targets
Those were removed from mainline kernels by Chromebook devs,
wanting to protect their broken babies at all cost.
This patch was dully tested here :
https://forum.armbian.com/topic/13515-panfrost-on-rk3288-and-gpu-on-600mhz-problems/
But you're welcome to test it again !
I did it, with a whole glmark2 round and it worked flawlessly.
To test the GPU at that frequency, locate the **devfreq** folder of your GPU unit on your system (For tinkerboards, it's in **/sys/devices/platform/ffa30000.gpu/devfreq/ffa30000.gpu**) and then :
* Check the available frequencies by doing `sudo cat available_frequencies` .
That should output something like this : `100000000 200000000 300000000 400000000 500000000 600000000`
Be sure that `500000000` is in the list.
* Setup the minimum GPU frequency to 500Mhz like this : `sudo echo 500000000 > min_freq`
You can also set up the GPU to not go over 500Mhz like this : `sudo echo 500000000 > max_freq`
Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
* Add initial Helios64 configuration
Add ethernet udev rules
Added disable auto power on script during shutdown
Configure ALSA to output audio to (DisplayPort) USB type-C
armbian-firstrun: exclude helios64 from generating fixed_mac
Each network interface on Helios64 already assigned to unique MAC
address in factory. Assigning Network Manager with cloned MAC is not
needed.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: rk3399: Add Helios64
Use rockchip propriettary loader
* kernel: rk3399-legacy: Update r8152 to support 2.5GbE USB RTL8156
Required for Helios64
* kernel: rk3399-legacy: update Rockchip PCIe driver
Port changes by ayufan on rockchip64.
* kernel: rk3399-legacy: Add support for Helios64
Add Helios64 device tree.
Enable missing driver/kernel module.
Auto load lm75 modules
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rk3399-legacy: rework roc-rk3399-pc patch
the patch broken due to additional line added by helios64 on
arch/arm64/boot/dts/rockchip/Makefile
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rk3399-legacy: update Rockchip PCIe driver
Backport bugfix from mainline
refer to
https://patchwork.kernel.org/patch/11561979/
and
https://patchwork.kernel.org/patch/11561977/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: rockchip64-current: Add support for Helios64
Add Helios64 device tree.
Enable missing driver/kernel module.
* config: helios64: use mainline ATF on current branch
and u-boot TPL/SPL instead of Rockchip proprietary loader
* helios64: u-boot v2020.07 update
* Add Helios64 target
* kernel: rk3399-legacy: update Rockchip PCIe driver
Removed unrelated changes from porting ayufan fixes
Signed-off-by: Piotr Szczepanik <piter75@gmail.com>
* helios64: make use of PACKAGE_LIST* variables
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* Add initial support for Odroid N2+
* Update C4 config and test booting
* Updates to C4, N2, N2+
- merge C4 and N2 legacy under meson64, same u-boot
- upgrade legacy kernel to meed DTB from mainline
- merge N2 and N2+, add a hack to display + in motd when N2+ is detected
- shortly spin N2 fan at startup
- merged N2 mainline and legacy boot script
- add upstream patches
* One of the regulators were breaking booting of Odroid N2
Co-authored-by: Werner <EvilOlaf@users.noreply.github.com>
It seems that Charger LED support for AXP20X-like PMICs (AXP813, ...) from Megous is less complete then from Olimex. Reverting the one in the tree and ading the one from Olimex
* Move current to 5.7.x
* Update linux-rockchip-current.config
* Move dev patches to current
* copy dev to current
* move dev patches to current
* move rockchip64-current to 5.7.x
* Add HDMI sound support for Allwinner A10, A20, A31
Closes https://github.com/armbian/build/issues/2084
* Enable HDMI audio in kernel config and update config with misc modules
For some reason these patches are getting applied despite already being in the 5.7 kernel with no complaints from the scripts.
There are more, but it's slow going file by file.
* Bump sunxi to 5.7.y
* Further cleanup 32bit works, 64bit needs more patches adjustement
* Also arm64 boots, SPI flash areas were refactored, new location is a bit fuzzy, leaving behind
* More fixed and cleanings, both variants builds now, but without overlay support
* fix sunxi overlays in AR-329 branch
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Co-authored-by: Martin Ayotte <martinayotte@yahoo.ca>
* Initial commit for kernel boot splash
* Add startup files to disable bootlog when system is up / down
* Update logo, remove deprecated one
* Introduce new u-boot variable bootlogo
* Adjust kernel config
* Make logo possible on Odroid XU4
- add legacy and current upstream patches
- delete xu4 environment since its not used
* Cleanup C2,C4, both tested, logo works on mainline,
- adding legacy upstream patches for c4
* Enable bootlogo by default on Odroid N2
* Enable logo on RK3399 desktop images
* Cleanup the rest of the environment files
* Add initrd hook that copy splash file to initrd.
* Missing logo bits for one boot scripts
* Enable boot logo on Pinebook A64
* Enable bootlogo on Teres
* Update config
* Adjust Rockchip64 dev and add PBPro stuff
* Remove deprecated patches
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Merge config with current
* WIP: Adding RockpiE config
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Mainline u-boot for ROCK Pi E
* Initial ROCK Pi E device tree in kernel
* Fixed supplies for ROCK Pi E device tree
* Adjusted u-boot load address for rockchip64 boards with 256MB eg. ROCK Pi E
* Blacklisted lima on ROCK Pi E
* Fixed ROCK Pi E patch after merge from master
* Removed mode settings from rk805 regulators
* Fixed issues with offloading for gigabit interface of RockPi E
* Adjusted ROCK Pi E board config
* Added dev branch for ROCK Pi E
* Add build targets
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Exchange legacy to current in ROCK Pi E build targets
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* Introducing Rockchip rk322x SoC support
Main features:
- Legacy kernel flavour based upon stable v2.x rk3288 Rockchip branch (https://github.com/rockchip-linux/kernel/tree/stable-4.4-rk3288-linux-v2.x)
- Current kernel flavour based on mainline 5.6.y kernel
- Mainline u-boot (v2020.04)
- Single generic tv box target (rk322x-box) which boots on all the known tv boxes
- Hardware devices (eMMC/NAND, led wiring configuration, SoC variant selection) modulation done by user at runtime via device tree overlays - a script (rk322x-config) is provided for autodetection and simple configuration by inexperienced users;
- Bits added to armbian-hardware-optimization to set affinity for irq handlers
- rk322x-box targets already added to targets.conf for automatic image creation
* Removed disabled patches
* Restored mysteriously removed comment character
* Moved rockchip-dev to kernel 5.7, removed already upstreamed patch (1016), adjusted conflicting patch (1015)
Most kernel configuration answer left at default, notables:
- Wireguard (as module)
- Zswap default compression set to LZO
- RK3288 GPIOMEM (as module)
- Enabled some new DMABUF bits (heaps, cmas)
- Hantro driver
- F2FS compression
* Disabled rx/tx dma for uarts, on my board causes system freeze during bluetooth initialization. Don't know if they ever worked, tried to enable them ages ago and they were already not working
* For xt-q8l-v10 rk3288 board:
- Upgraded u-boot to v2020.04, reworked configuration to match new version, enabled HDMI video console
- Increased u-boot boot delay from 0 seconds to 1 second for rockchip boards, to allow user interrupt u-boot boot process
- Imported efuse rk3288 driver into u-boot, made ethernet address stable using soc serial
- Upgraded ddrbin loader to v1.08
- Added VDSO patch for rockchip-current and rockchip-dev kernels for clock_gettime64 to fix erratic clock on 32 bit ARM devices with recent glibc
- Disabled 600 Mhz OPP node for GPU due to Panfrost instabilities, thus enabled 500 Mhz node
- Various fixes and enhancements to xt-q8l-v10 device trees for current and dev targets
- Added (disabled) u-boot HDMI patch for Tinkerboard
* Removed rk3288 ddrbin v1.08 from rockchip blobs, changed reference to use rkbin-tools repository
* Removed unneeded disabled patch for tinkerboard HDMI
We don't need to enable UARTS and OTG by default on all Nanopi boards. This seems to cause instability on M1
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
NanoPi R2S has the same issue as ROC-RK3328-CC.
With working GPIO, during init the GPIO state s reset.
This causes the sdmmc regulator to shut down, preventing detection.
Removing and replacing the card will allow it to be detected, but that should not be necessary.
Fix this by setting the regulator on at boot.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: 75aa567803
Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
* patch: kernel: rockchip-dev: Handle more resolutions with HDMI (β)
The added patch add more PLL configurations, in order to satisfy
more HDMI frequencies requirements.
This should allow users to benefit from more resolutions.
However, this is fairly untested. I only tested it on my 1080p
screen and, yeah, it works but so does the kernel without this
patch.
Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
* patch: kernel: rockchip-dev: Handle more resolutions with HDMI (β)
Now with proper patches names.
Anyway :
The added patch add more PLL configurations, in order to satisfy
more HDMI frequencies requirements.
This should allow users to benefit from more resolutions.
However, this is fairly untested. I only tested it on my 1080p
screen and, yeah, it works but it also does without this
patch.
So could anyone test this with the following configurations ?
* [ ] A HDMI 4K screen
* [ ] A HDMI 1366x768 screen resolution
* [ ] A VGA screen with a VGA to HDMI adapter
* [ ] A DVI screen with a DVI to HDMI adapter
Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
* Using the patches provided by @Kwiboo for HDMI
This provides me way more resolutions, including interlaced modes.
I don't see 4K modes, though the screen attached can't do it,
so I still don't know if that can help provided 4K modes on mainline
kernels.
Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
* Support for 4K screens
Using fixes provided by @czak
Tested and approved by @czak too !
Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
There have been intermittent issues with SPDIF output on H3 & H2+ devices.
Digging into the H2+ & H3 datasheets I encountered an important clue on
table 8.7.2.2: s_clk needs to be 4x24.576 MHz or 4x22.5782 Mhz.
Probably due to how SPDIF is a huge oversample of the audio frequency.
Co-authored-by: George Lander <lander@jagmn.com>
* Attach Meson64 CURRENT to 5.6.y and make DEV = CURRENT at this point.
There is a lot of changes to 5.7.y and can be done after release or by someone that feels a need for this right now.
* Delete meson64_fclk_div3.patch
this fix has been upstream for some time, I had issues with it on 5.4, which is why it had been removed there.
* [ meson64 current ] kconfig tweak
disable Rockchip SoC drivers
* [ meson64 current ] remove rockchip patches
* [ meson64 current ] disable CMA patch GX
* [ meson64 current] add libretech cc audio patch
This brings the dts even with the khilman 5.8/integ branch which includes all of the audio changes. The kernel is registering audio devices, however nothing comes out. committed in case someone wants to spend time debugging/testing theories.
* fix permissions
was editing from another machine, accidental change of permissions in the patch
* Set default mixer settings
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* [ meson64 current ] GXL audio commit
This moves to the mainline patches and covers le potato and la frite. Adjusted asound config to handle a commonized sound card name.
* [ meson64 current ] add gxbb audio WIP
Playback is too fast, a clock setting is off somewhere.
* Update kernel configs
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Co-authored-by: Tony <tonymckahan@gmail.com>
* Switching Odroid C1 boot partition to FAT
U-boot FAT driver is very unstable and there is no wish to dig into u-boot. Seems like a sane workaround @plntyk
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add notes for separate boot partitions
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Typo
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bugfix: use zImage for converting to uImage since on FAT partitions we use move
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Cleanup C1 boot scripts
We have no plans to ever support legacy kernel again. Removing related things
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* A bit more radical change. Moving meson current to (new) legacy, current to 5.6.y and dev to some development branch / commit.
* Remove unneded patch
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Enable DMC for roc-rk3328-cc (renegade) in current
No stability issues with this enabled, no reason not to merge, enables higher clockrates via manual setting for now.
* enable and change odroidc1 config
remove EOS
enable current and dev config
meson-current: update config
meson-dev: update config
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* meson-current meson-dev: reduce Kernel size
with default loading locations in u-boot
the uImage can be too large and will be partly overwritten
with the loaded dtb leading to boot failues due to wrong checksum
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* odroid-c1: change default loglevel
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* meson: fix odroidc1 boot and create uImage
without uImage the board will not boot
take the already used hack (?) from
general-kernel-odroidn2-current.patch
since KERNEL_IMAGE_TYPE does not work as expected
Signed-off-by: Dirk Neukirchen <plntyk.arm@plntyk.name>
* Update targets.conf
* Update targets.conf
* Update targets.conf
* Making a bigger diff
* Removing build_minimal
One can choose what to build, while build targets are defined elsewhere
* Governor interactive n/a
* Updating config
Cause of changes in boot.ini we don't need to worry about size. After few tests, no problems sighted.
Tested running Docker.
* Adjust dev config too
Tested.
* Update odroidc1.conf
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
deleted activation of i2s1 - 1c2240, because it isnt necessary for the corect operation of audio-analog and sound_hdmi
USB isnt affected.
i2s2 is right, because its needed for sound_hdmi 1c22800
It doesn't want to boot on 5.4.y. Adjusting kernel config, fix Docker dependency problem, move few other minor fixes from openwrt and closing https://github.com/armbian/build/issues/1453
* npi-a64-only-audio-usb.patch
This is a follow-up to the PR #1927 where the complete sun50i-a64.dtsi was changed.
This is a patch ONLY for the NanoPi A64 .dts to activate Audio & Upper USB-port
Has been build/compiled and works with focal 5.6.5
Address = Alias:
sound=sound
sound_hdmi = sound_hdmi
1c19000 = usb_otg
1c22400 = i2s1
1c22c00 = dai
1c22e00 = codec
1c22800 = i2s2
1f015c0 = codec_analog
* Create npi-a64-only-audio-usb.patch
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* meson-sm1: use amlogic-boot-fip to generate boot binary for SM1
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* patch: add Linux and U-Boot patches
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* configs: enable Odroid-C4
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* Add 8189es out of the tree patch from repository.
* Added 8189FS version
* Support building on kernel 5.6. for 88x2bu
Tested for building on legacy, current and dev, removed old patches
* Cleaned up OrangePi 4 device tree (with help from @chwe17)
* Reconfigured OrangePi 4's usb-c power input
* Powertree fixes for OrangePi 4
* Removed unnecessary xin32k clock in OrangePi 4's device tree
* Reverted fusb302 change for OrangePi 4
* Removed uart4 in OrangePi 4's device tree
* Synced OrangePi 4's DTS from current to dev
* Synced OrangePi 4's DTS from current to legacy
* Minor fixups for OrangePi 4 DTS in legacy
* Add initial support for FriendlyARM Nanopi R2s
One net port not working yet.
* Enable 2nd network, rename it to lan0, adjust motd to see lan*
* Added rk3328 dmc devfreq driver
* Fixed SD card issues for NanoPi R2s
* Added usb serial gadget console for NanoPi R2s
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* [ROCK Pi S] WIP mainline (dev) target
* [ROCK Pi S] Disable `rockchip64-dev` patches for now
* [ROCK Pi S] Add rtl8723ds wifi drivers
* [ROCK Pi S] Enable onboard audio (`rk3308-acodec`,`rk3308-i2s-tdm`)
Switch kernelsource to 5.5.y
* [ROCK Pi S] WIP: Use mainline 5.5.y kernel
Add a new `current` branch that tracks mainline
* [ROCK Pi S] Use updated u-boot board dt name `rk3308-rock-pi-s`
Removing the need for a special bootenv for n
* Temporally disable current
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* kernel: linux-sunxi-{dev,current}: Enable CONFIG_BT_HCIUART_BCM
This patch returns Broadcom's protocol for bluetooth HCI over serial port.
* BananaPiM2Zero: Patches for the devicetree
These patches add HDMI out (with audio) and add bluetooth / wifi
rfkill devices.
* Port ANX78xx Pinebook / Teres LCD panel driver from 5.6-rc1
* Move Teres U-boot to 2020.01 ... it boots with enabled screen now.
* U-boot 2020 needs some extra Pyton utils when packing sunxi bootloader. Adding to native and Docker build dependencies.
* Add Pinebook lid wakeup
* python3-dev is also needed dependency
* [sunxi] allow pcm5102a codec module to be built
for sunxi-current and sunx-dev kernels.
Fixes#1798
* [sunxi] build pcm5102a and pcm51xx_(i2s|spi) modules by default
on sunxi-current and sunxi-dev kernels.
* Added ALSA configuration bits for rk3288 HDMI and SPDIF to allow
pulseaudio show proper sound device/profile/mapping names instead of
just "Built-in Audio" for all of them
* Added ALSA device description in asound.conf to provide correct labels for PulseAudio for RK3288 devices when SPDIF and DW-I2S-HDMI simple audio cards are exposed
Removed unnecessary ALSA configuration files previously added from rockchip.conf
* Fixed cpu operating points tables and raised a bit (+5°C) cooling for non-critical temperatures for xt-q8l-v10 in dev and next kernel flavours
* Fixed again cpu opp table
* Removed whole cpu opp table and retouch only necessary operating points
* Enabled gpiomem driver for xt-q8l-v10 in next kernel flavour
* Added debounce delay and card detect gpio pins for sdmmc card holder for xt-q8l-v10 board
* Added card-detect and debounce delay for sdmmc for xt-q8l-v10 board in next kernel flavour too
* Fixed missing comment in xt-q8l-v10 device tree patch
* Added gpiomem to xt-q8l-v10 board for dev kernel
* Fixed FAN53555/Silergy patches to accomodate changes in u-boot v2019.04
* Changed property property flags for USB regulators in u-boot and kernel: kernel is now informed that bootloader is going to turn the USB power on
* Fixed indentation in rk3288-xt-q8l-v10.dts, raised debounce delay to sdmmc, added vbus-supply to USB host, removed some unneeded properties
* Added working DDR52 mode for eMMC on xt-q8l-v10
* Removed regulator-off-in-suspend for some xt-q8l-v10 regulators due to changed in act8865.c driver which causes the regulators to be misconfigured
* Adjusted targets for xt-q8l-v10 (provides bionic desktop + buster server)
* Removed all regular-state-mem nodes in xt-q8l-v10 device tree because the change in act8865.c affects also non-off entries
* Brought xt-q8l-v10 device tree from rockchip-current to rockchip-dev
Adds k5.5 audio pipeline dts entries, adds audio to Renegade, cleans up some dts mess in renegade
- Note: PulseAudio seems to need to toggle a couple times before audio will play. That is not addressed in this patch.
* Add exceptions to support native Ubuntu 20.04 building, fix small bug related to SD card write verification.
* Improve first install steps by installing Dialog and lsb_release first. This left out since we moved host install after we choose what we will do ... dialog is essential for this. Second we don't wait properly for APT manager to finish the process. Fixed with this commit
* Suppress output
* Update OdroidXU4 dev config & patches
* Attach Meson64 to mainline with a bunch of patches. Tested, but need further work.
* Enable DVFS on N2 which sometimes works, sometime doesn't, cleanup
* Enable beta targets for Meson64 kernel family
* Bump with version
* Fix cpufreq (dynamic frequency scaling) for mvebu-current. Also move disabled patches in extra folder for better usability
* Move unlock-atheros-reg patch to disabled
* Accidentally deleted a patch instead of moving it to disabled. Restore it
* Survived standard stress testing + one night of normal operation (Helios4)
* Wireguard: bump tag to most recent since it breaks building on 5.4.y
* Move rockchip current to 5.4.y
* Move sunxi current to 5.4.y
* Move meson64 to 5.4.y
* Move odroidxu4 to 5.4.y and enable "current" targets
* Enable missing target
this update of the previous patch (#1663) additionally fixes the following overlays:
sun5i-a13: i2c1..2, nand, pwm, spi2, uart0..3
sun4i-a10: can, i2c1..2, pwm, spdif-out, spi0..2
corrections re #1663:
sun7i-a20: fixed typo in pwm overlay in #1663
arch64-makefile now back in line with original patch
this update of the previous patch (#1663) additionally fixes the following overlays:
sun5i-a13: i2c1..2, nand, pwm, spi2, uart0..3
sun4i-a10: can, i2c1..2, pwm, spdif-out, spi0..2
corrections re #1663:
sun7i-a20: fixed typo in pwm overlay in #1663
arch64-makefile now back in line with original patch
some armbian dts overlays currently do not work since pinctrl names have not been
adapted to renaming in 5.0 and 5.2.
this patch modifies the following overlays:
sun50i-h5: cir, spdif-out
sun8i-h3: cir, spdif-out
sun7i-a20: i2c1..4, mmc2, pwm, spdif-out, spi0..2, spi-add-cs1, uart4..7
sun5i-a13: uart0
sun4i-a10: spdif-out
some armbian dts overlays currently do not work since pinctrl names have not been
adapted to renaming in 5.0 and 5.2.
this patch modifies the following overlays:
sun50i-h5: cir, spdif-out
sun8i-h3: cir, spdif-out
sun7i-a20: i2c1..4, mmc2, pwm, spdif-out, spi0..2, spi-add-cs1, uart4..7
sun5i-a13: uart0
sun4i-a10: spdif-out
* Sunvell R69: cpu voltage regulator (re-)added - dram clock reduced.
CPU regulator (re-)added to u-boot and kernel dts - the box will not boot without it.
Dram clock reduced in defconfig to increase stability.
[AR-85]
* Updated rockchip64-dev to u-boot v2019.10 and BL31 v1.30 (rk3399 boards)
* Updated rk3399 to u-boot v2019.10 and BL31 v1.30
* Revert changes to renegade u-boot patches
* Moved renegade u-boot patches into board dir
* Added debug info for RockPro64 and switched sdmmc to fifo-mode
* Disabled regulators in SPL for RockPro64
* Re-enabled sd vcc regulator in SPL for RockPro64
* Some device tree and config changes for OrangePi RK3399
* Fixed Rock Pi 4A's $BOOTCONFIG
* Let some boards use mainline atf instead of the one in rkbin
For example, roc-rk3399-pc can just boot the kernel using the
mainline atf.
* Add roc-rk3399-pc
* Fixed reset in mainline ATF
* Attached ATF version to v2.2 tag
* WIP: sdmmc fifo-mode in SPL only
* Renamed source config files
* Reverted changes to rockchip64 sources config
* Reverted patch moves
* Add missing trust.ini patch to rk3399 u-boot
* Reinstated tpl/spl patches in rk3399 family
* Added $RKBIN_DIR prefix in rk3399 sources
* Add demonstration of boards bootloader assignment in rk3399
AR-1 - Adding support category for distributions
AR-4 - Remove Allwinner legacy
AR-5 - Drop Udoo family and move Udoo board into newly created imx6 family
AR-9 - Rename sunxi-next to sunxi-legacy
AR-10 - Rename sunxi-dev to sunxi-current
AR-11 - Adding Radxa Rockpi S support
AR-13 - Rename rockchip64-default to rockchip64-legacy
AR-14 - Add rockchip64-current as mainline source
AR-15 - Drop Rockchip 4.19.y NEXT, current become 5.3.y
AR-16 - Rename RK3399 default to legacy
AR-17 - Rename Odroid XU4 next and default to legacy 4.14.y, add DEV 5.4.y
AR-18 - Add Odroid N2 current mainline
AR-19 - Move Odroid C1 to meson family
AR-20 - Rename mvebu64-default to mvebu64-legacy
AR-21 - Rename mvebu-default to mvebu-legacy
AR-22 - Rename mvebu-next to mvebu-current
AR-23 - Drop meson64 default and next, current becomes former DEV 5.3.y
AR-24 - Drop cubox family and move Cubox/Hummingboard boards under imx6
AR-26 - Adjust motd
AR-27 - Enabling distribution release status
AR-28 - Added new GCC compilers
AR-29 - Implementing Ubuntu Eoan
AR-30 - Add desktop packages per board or family
AR-31 - Remove (Ubuntu/Debian) distribution name from image filename
AR-32 - Move arch configs from configuration.sh to separate arm64 and armhf config files
AR-33 - Revision numbers for beta builds changed to day_in_the_year
AR-34 - Patches support linked patches
AR-35 - Break meson64 family into gxbb and gxl
AR-36 - Add Nanopineo2 Black
AR-38 - Upgrade option from old branches to new one via armbian-config
AR-41 - Show full timezone info
AR-43 - Merge Odroid N2 to meson64
AR-44 - Enable FORCE_BOOTSCRIPT_UPDATE for all builds
* Fix wifi
patch "board-h2plus-nanopi-duo-add-device.patch": increase post-power-on-delay-ms from 50ms to 200ms in wifi_pwrseq node in nanopi-duo dts [dev-branch].
Change in line with other XRADIO device trees (orange pi zero, sunvell).
See also Pull Request #1605.
* Fix xradio patch (dev-branch)
fix KConfig to 5.x - WLAN_VENDOR-flag set to "y" in line with other drivers - otherwise module not loaded.
* correct device name
change nodes "model" and "compatible" to correct device name (from "NanoPi Duo AIR" to "NanoPi Duo") [dev-branch]
Not functionally necessary, but more correct.
U-Boot already support device tree overlay. However, it requires the
base dtb to be compiled with __symbol__ support.
This commit added patches to compile dtb with required parameter.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* UPSTREAM: media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*
Realigned the source code to the RC_TYPE* / RC_BIT_* refactoring
* Restored the inclusion of the DVB-USB dib0700 driver
Adjust configuration, merge with general purpose armv7 Fedora kernel, remove deprecated patch, move coherent_pool and cma to boot script
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
atomic_pool_size can be controlled by kernel cmdline,
coherent_pool=nn[KMG] [ARM,KNL]
then use this parameter to replace the patch.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Initial commit for serial consoles rfc
* Board configuration cleanup + small tweaks
* Add serial gadget rename to dev kernel as well
* Cleanup, fixing permissions
* Cleanup board configs
due to modpost is used by dkms or out-of-tree kernel modules, eg mali
so add this tool to linux-header's postinst script
for #1552
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
* Initial commit for FA ZeroPi.
* Tested for building.
* Adjust few bugs.
* Move to WIP since its not tested on hardware yet.
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Added initial support of MCIMX7SABRE board
MCIMX7SABRE is NXP iMX7d-based board with 1Gb RAM
2xGBE, 1xmPCIe
Change-Id: I62685a55de54fa6109bef2a8e2ee760d831ffa0e
* Added initial support of MCIMX7SABRE board
MCIMX7SABRE is NXP iMX7d-based board with 1Gb RAM
2xGBE, 1xmPCIe
Change-Id: I62685a55de54fa6109bef2a8e2ee760d831ffa0e
* Changed BOARDFAMILY from mx7dsabre to imx7d
Change-Id: Id351c9f6a8c907b415b804bfe11b86027278ed86
* Disabled MD driver for imx7d Kernel
MD driver does not work correctly on NXP-modified kernel
Change-Id: I58e8de6ee0b99282c452f594e22f6f7e1ff59ae0
* Introducing build-all-ng
* Implementing REBUILD_IMAGES='board1,board2,...' for rebuilding certain images only
* Add optimisations when building kernels - only cycle trough needed targets. Adding variable for defining whether an image is build, otherwise only BSP is made.
* repository manipulating RFC
* Add bianco deb file that is added by default if repository is clean
* Switch to gpg2 signing method, small bugfix
* Create subdir for debs and debs-beta
* Synaptic bugfix: installing indexing tools https://forum.armbian.com/topic/8021-orange-pi-one-synaptic-package-manager-search-very-slow/?do=findComment&comment=74918
* add all modules by default to Odroid N2, but leave them commented
* Bugfix: not making any builds when selecting kernel_only
* Remove EXTERNAL=yes ... move armbian-config and armbian-firmware into main compilation area, drop others since they are deprecated anyway. This will also enable multi threaded images making
* Move armbian.list to create_sources_list function. Replace NTP by Chrony. Remove armbian-firmware from PACKAGE_LIST and RockPi 4A (#1528)
* Replace NTP by chrony. Remove installion of outdated armbian-firmware from reposity.
* added RockPi 4A
* New format for board config
* Fix Bluetooth dependencies for minimal package - add rfkill to family related installs
* Moving networkd-dispatcher from minimal image
* Cubox-i: update default config
* Improving umount process
* Add purgesource feature
* Add FULL_DESKTOP to install few more applications on top of our desktop - notebooks should * rk3399 default: adjust patches and configuration
* Enable full desktop on most powerfull boards and notebooks
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Added ALSA configuration bits for rk3288 HDMI and SPDIF to allow
pulseaudio show proper sound device/profile/mapping names instead of
just "Built-in Audio" for all of them
* Added ALSA device description in asound.conf to provide correct labels for PulseAudio for RK3288 devices when SPDIF and DW-I2S-HDMI simple audio cards are exposed
Removed unnecessary ALSA configuration files previously added from rockchip.conf
* Fixed cpu operating points tables and raised a bit (+5°C) cooling for non-critical temperatures for xt-q8l-v10 in dev and next kernel flavours
* Fixed again cpu opp table
* Removed whole cpu opp table and retouch only necessary operating points
* Enabled gpiomem driver for xt-q8l-v10 in next kernel flavour
* Added debounce delay and card detect gpio pins for sdmmc card holder for xt-q8l-v10 board
* Added card-detect and debounce delay for sdmmc for xt-q8l-v10 board in next kernel flavour too
* Fixed missing comment in xt-q8l-v10 device tree patch
* Added gpiomem to xt-q8l-v10 board for dev kernel
* Fixed FAN53555/Silergy patches to accomodate changes in u-boot v2019.04
* Changed property property flags for USB regulators in u-boot and kernel: kernel is now informed that bootloader is going to turn the USB power on
* Removed assert-phy-reset-when-waking-up-in-rk3288-platform patch due to inclusion in mainline 5.2 kernel
Reenabled ARM-DTSI-rk3288-add-usbphy-reset patch to include USB PHY reset lines to all rk3288 devices
* Removed ARM-DTSI-rk3288-add-usbphy-reset.patch due to inclusion in mainline kernel 5.2
* Attached cubox-i to stock kernel. Tested. Sadly ZRAM has some issues, so it must ramain disabled
* more imx6 updates for cubox/udoo
* Enable HDMI on Cubox-i
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
1, format all patches from https://github.com/megous/linux
`git format-patch 79bf89b88a87f2ebf147f76d8c40183283b49b51...2a7cb228d29c3882c1414c10a44c5f3f59bfa44d`
and copy them to sunxi-next with prefix `0000-`
2, remove unnecessary patches, due to they are revert of upstream patches:
4d867e2bd64e674a3000b8e05fe47e8bb8175edda2888276ee
3, remove fail to apply and no use:
960ddd63a8
4, remove WireGuard patch:
1cd13b836c
5, remove meaningless patch:
f26e36379a
6, remove merged or included by megous/linux patches:
0112-mfd-axp20x-Add-supported-cells-for-AXP803.patch
board-bpi-m3-make-ethernet-working.patch
board-pine-h6-pine-h6-0025-phy-sun4i-usb-add-support-for-missing-USB-PHY-index.patch
7, remove stable release update patches.
ignored.
8, rebase sunxi-next/sunxi64-next to upstream linux-4.19.y
test result:
all patches applied, no error.
orangepipc/orangpioneplus build OK.
Signed-off-by: Zhang Ning <832666+zhangn1985@users.noreply.github.com>
In current kernels (both next and dev) this patch breaks cpufreq and all that depends on it (no dvfs means board overheating). Removing it makes cpufreq and dvfs work again.
* fix kernelcrash with config_of_overlay combined with isp1 camera driver,based on:
30a8401c2f
* add basic dtbo infrastucture
* set ov5647 (RPi cam rev 1.3) as default, imx219 (RPi cam V2.1) outputs a blurry green videostream at the moment
* maybe fix powering for camera
* adjust mainline dtbo patch to bsp kernel
* got you! little.. dtbo's are properly built and applied during boot.
* add imx219 overlay to switch between cameras & add ae/awb fix for ov 5647 from asus tinker repo
* patch imx219 up to 96396323fa
* bring back wireguard, otherwise igor gets grumpy :D
* fix camera status
* Initial Mvebu RFC https://github.com/armbian/build/issues/1426
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* mvebu: add missing patches
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* mvebu: change making u-boot targets to standard way, adjust patches and config
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* helios4: set default branch to use U-Boot 2018.11
Switch over to U-Boot 2018.11 that has been used for some time in next
branch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: Enable DEV branch
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: Add RTC support on Clearfog and Helios4
Added DM driver for mvebu RTC and enable it on Clearfog and Helios4
configuration.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* add boot-marvell.cmd backward compatibility
The patches added missing variable that used on boot-marvell.cmd and
also adjust the some memory addresses to prevent crash due to usage of
fdt_high and initrd_high.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios4: Added SPI NOR flash target
Build bootable SPI NOR flash image.
Change the boot order to USB -> SATA -> MMC
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Restore SPI support on U-Boot 2019.04
* mvebu: kernel: Added Wake-On-GPIO and WoL support
The patch set was missing during transition.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* [#1429] SolidRun's ARMADA A388 SOM U-Boot ODT Update
Old versions of U-Boot did not configure correctly the ODT on data
signals of DDR RAM on SolidRun's ARMADA A388 SOMs.
According to SolidRun Knowledge Base, the changes already pushed to
mainline U-Boot. But then it was overwritten when Marvell DDR Training
Tool updated
[URL]
https://developer.solid-run.com/knowledge-base/armada-38x-som-u-boot-odt-update/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* [#1429] mvebu: u-boot: Add revision id for Armada 38x B0
Added patch for SolidRun U-Boot v2018.01 and
for Helios4 U-Boot v2018.11
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* clearfog: Added SPI NOR flash target
Build bootable SPI NOR flash image.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: clearfog: DEV branch use mainline U-Boot
Also move clearfog base patch into its own board folder.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: enable U-Boot uart target
Normal MMC image can be used for uart boot using following command:
./tools/kwboot -b u-boot-spl.kwb /dev/ttyUSBX
But on Helios4, the SPL failed to continue the booting process if ECC is
enabled, so disable it.
Since the usage of uart boot is more for rescue/debug, disable autoboot.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: NEXT branch use mainline U-Boot
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: fix fancontrol related bug during buster testing
- On kernel 4.19, cpu thermal sensor changed the name from
armada_thermal into f10e4078.thermal. Added this new name to udev rules
- Since DEFAULT branch now use kernel 4.14, update fancontrol
configuration
- Load lm75 kernel module
- On kernel 4.19, cpu temp reading about 20 degree C lower, update
fancontrol configuration.
[URL]
https://forum.armbian.com/topic/10214-clearfogpro-possible-change-in-temperature-reporting-between-414next-and-419dev
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: Override vendor provided fancontrol unit
systemd emit following message on dmesg
systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/fancontrol.pid \xe2\x86\x92 /run/fancontrol.pid; please update
the unit file accordingly.
Override and change the value in the unit file to remove the message.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: DEV branch use its own u-boot patch folder
The patches are copied over from u-boot-mvebu-next
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: u-boot: Make clearfog model distinction more obvious
While at it, also change SerDes LANE4 into USB 3.0 on Clearfog Base.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* lib: Use apt-get install instead of dpkg on install_deb_chroot()
dpkg -i does not install dependencies required by the package.
This is needed if the BSP package requires other package that is not
installed during debootstrap.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: mvebu: helios4: Move various tweak to family_tweak_bsp()
Various tweak in family_tweaks_s() only applied to SD card image.
Move it to family_tweaks_bsp() so it will also included on the BSP
package and applied to existing user.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: mvebu: helios4: Add /etc/modules to BSP
On kernel 4.19, user need to modify the /etc/modules to add lm75 kernel
module. Pack the file into BSP so user no longer needed to modify it.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: kernel: Make zbud as built-in module
To remove the following error:
[ 1.705485] zswap: default zpool zbud not available
[ 1.705488] zswap: pool creation failed
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* bootscripts: mvebu: Add default value for spi_workaround
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: kernel: Backport armada_thermal changes to 4.14 (#1452)
On kernel 4.19, armada_thermal driver has been fixed to address
Marvell's Errata #132698 (The changes first appear on LK 4.16). The
result is temperature reading is around 20 degree Celsius lower.
Currently armbian-motd apply -20C tweak for both LK 4.14 and LK 4.19
which is incorrect. Instead of adding some logic on what condition to
apply the tweak, it is better to remove the tweak and patch the kernel
instead.
Revert commit b3dd4e9 ("[ mvebu ] Put back Armada temperature tweak in
motd")
which is part of #1421 solution.
[URL]
https://forum.armbian.com/topic/10214-clearfogpro-possible-change-in-temperature-reporting-between-414next-and-419dev/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: unified fancontrol config
Since LK 4.14 on DEFAULT branch already patched and the temp reading is
same as LK 4.19 on NEXT branch, it is no longer needed to separate
fancontrol configuration file.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: helios4: Remove rev id patch
The patch is already applied in helios4 repo, no need to have it in
armbian.
This revert helios4 part of commit 7411c55
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: clearfog: enable PCIe support and PCIe reset
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* u-boot: clearfog: add boot-marvell.cmd backward compatibility
The patches added missing variable that used on boot-marvell.cmd and
also adjust the some memory addresses to prevent crash due to usage of
fdt_high and initrd_high.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu: helios4: tweak regarding temperature setting
Make fan speed similar compared to pre-patched armada-thermal. Target
PWM value around 70 during idle.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: sources: clearfog to use u-boot 2018.01 for NEXT branch
This changes also affect Helios4. Moved the shared U-Boot source setting
back to Helios4 for NEXT branch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* config: boards: build Stretch image for Clearfog and Helios4
Also remove DEV from Helios4 CLI_TARGET
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: mvebu-next: Disable access to SPI Flash
User need to set spi_workaround=yes to enable SPI Flash access and lost
access to internal SATA.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu-next: adjust kernel config
* mvebu-dev: bump to 5.2 and adjust kernel configuraion. Tested for building.
* Adjust kernel config, add AUFS
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* mvebu-next: Adjust kernel config, add debug GPIO
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* mvebu-dev: separate Clearfog Base U-boot configuration file and patch
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
I've tested my OPi3 for best voltage numbers (for resolving stability problem after first patch), using StabilityTester and increasing slowly mV by 10 after every crash. Finaly, this values gives no error by running StabilityTester 100 times.
- change console welcome text
- changed display manager to lightdm by default and remove nodm completly
- desktop login manager enabled by default, toogle can be done with armbian-config
- added URL to the build script and commit hash to /etc/armbian-release file
- added debconf-utils,html2text,mmc-utils,sunxi-tools to the base and additional pkg list
- added synaptic package manager and onboard keyboard to the desktop base
- changed motd console welcome text to: Welcome to Debian Stretch with Armbian Linux 5.1.6-sunxi
- added "logout" to the panel/menu
- added normal users to additional groups: disk tty users games
* Adjust tabs and alter displaying build options at the end - hide empty ones
* Fix wrong MOTD message, adjust logic to autologin by default and request login for both notebooks
* Making fs cache naming more intuitive, rename script
* Move additional kernel drivers into separate file. Add AUFS for K5.1 this way, attach wireguard sources to last known working tag. master is broken atm
* Add two more extra wireless drivers 88x2BU, (improved) 8811EU and introduce switch EXTRAWIFI which is enabled by default
* Move 8812AU to the same version we have now. More recent has some performance issues in AP mode. Adjust configuration, add mvebut-dev 5.1.y kernel
* Enable Wireguard also on 3.10.y since it was fixed upstream. Attach bach to master branch since its working now
* Rockchip64 & RK3399 - upstream patches and remove deprecated patches, mvebu64 add DEV kernel attached to 5.1.y
* Enable BT on Tinkerboard CLI images as well
* cubox-i move to 5.1.y and enable missing HDMI
* Bugfixes for adding wireless driver to Kconfig. Adjusted RK3399 kernel due to upstream changes at FriendlyARM - does not boot yet. Changes has to be extract from their commits. Removed patches with RTL8188EU since we add more recent driver with a new precedure. Small fixes mvebu-default, udoo-next, s56818-next, ... remove deprecated patches.
* Boot-able RK3399-default config, add upstream patches for K4.4.y mvebu-default/udoo-next
* Adjust overclocking patch to meet upstream changes
* Odroid XU4 - remove deprecated kernel patches
new values are based on stabilityTester results
when using 930mV for 1.6GHz and 980mV for 1.8GHz, xhpl failed randomly.
So 930/980mV are the critical operation voltage.Then increase 10mV and
run 100 times test, result shows that xhpl (not always) failed 1~2 times.
It seems +10mV is still not enough to ensure dc-dc output voltage always
above operation voltage, that means the design of dc-dc converter is not
good enough that results in large ripple.
The testing script is "github.com/mzhboy/StabilityTester"
The following configuration have been tested.
1.08-1.32-1.48-1.64-1.8 GHz
900-910-920-930-990 *ok, 930 failed 2/100
900-900-910-940-990 *ok, 990 failed 1/100
890-900-910-940-990 *ok, 990 failed 1/100
880-880-910-940-1000 *ok, 940 failed 2/100
880-880-910-950-1000 *ok, 1000 failed 1/100
880-880-910-950-1010 *ok
use more powerfull 'cpuburn-a53' to do pressure test.
power meter shows that 'cpuburn-a53' consumes much more power than
'stress -c 4' in the same condition. 930mV is not enough when running
'cpuburn-a53' meanwhile 950mV is the minimum voltage.
When running 'cpuburn-a53' at 1.8G, h6 consumes lots of power and generate
such amount of heat that an active cooling is necessary otherwise h6
gets overheat and system crashes. Even with active cooling and heatsink
is in low temperature the junction temperature is still quit high that
it reaches about 88~90 ℃ . Maybe the high thermal resistance of plastic
package causes the problem.
* [sunxi-dev][h6]update orangepi lite2 dts file patch
* [sunxi-dev][h6]update patch for sun50i-h6.dtsi
* [sunxi-dev][h6] new operation voltage table of allwinner h6
The correct operation voltages are find out after many reboots and test (over 20+).
the original 1.16v@1.64/1.8GHz was too high since standard cell voltage
of 28nm@HPC is 0.9v, h6 got overheat very quickly over 110 Celsius and then system hangs,
a power-cycle off is needed to reset soc.
I use 'stress -c 4' to do pressure test, with a medium size passive heatsink on top of h6.
The pressure test proves that the soc has about 4 watt power consuming
that is much lesser than original 6~7.x watt when running at 1.8GHz(orangepi lite2 with
usb Ethernet rtl8153 and usb hub, wifi is connected but not used).
Soc runs much more stable and does not get overheat easily under heavy load
with new opp table.
* [sunxi-dev][h6] orangepi lite2 wifi fix
bcm43455-fmac is buggy, reset to bcm4329-fmac
Commit 683d9384e6 brought back the upstream A64 timer fixes from 5.1.y into to the 4.19.y Armbian NEXT tree but missed the activation in the device node.
This change is the same as commit efff71ba4f for the DEV tree and will re-introduce the activation for the fix.
Add patch to bring A64 pinctrl driver inline with other sunxi pintctrl drivers by disabling strict mode.
With kernel 4.15.y (and later):
* Strict mode was enabled by default via commit 1396007286b1e2fd5dd10ae6a5ccaaaed51ab762 which can/will cause breakage with existing implementations.
* The ability to configure strict mode was added via commit aae842a3ff3385f27f1df8a9ee1494a416ec032d to allow older drivers to maintain existing behavior and avoid breakage.
* Commit cd70387f892205bcd7b8093b0837269b0739cbe0 had then explicitly disabled strict mode for most other existing SoCs but did not include A64.
This change is to update the A64 pinctrl driver similar to the other pre-existing SoC pinctrl drivers.
See 63f8f3badf799c8b63ff33a489886bc138ce5d09 drm: bridge: Constify mode arguments to bridge .mode_set() operation
and fcd70cd36b9bf697122538c9e38e8cf954b2342b drm: Split out drm_probe_helper.h
arch/arm64/boot/dts/allwinner/overlay/sun50i-a64-spi-jedec-nor.dts:12.13-17.6:
Warning (spi_bus_reg): /fragment@0/__overlay__/spiflash: SPI bus unit
address format error, expected "0"
arch/arm64/boot/dts/allwinner/overlay/sun50i-a64-spi-jedec-nor.dts:26.13-31.6:
Warning (spi_bus_reg): /fragment@1/__overlay__/spiflash: SPI bus unit
address format error, expected "0"
Updated DT patch for allwinner unstable timer
Replace previous patch for DT timer node with new patch from upstream commit.
This matches the upstream change to the actual workaround in drivers/clocksource/arm_arch_timer.c
via commit c950ca8c35eeb32224a63adc47e12f9e226da241
seems like this patch headed upstream for rk3328-roc-cc:
https://patchwork.kernel.org/patch/10804863/
doesn't include the tx/rx delay changes in the original rock64 patch:
https://patchwork.kernel.org/patch/10178969/
My testing showed these changes help with a link down and reset that happens on heavy
exchanges, like streaming. Maybe we should sumbit upstream a patch that hadles this as well?
Interrupt pin of the Ethernet PHY is connected to GPIO. The PHY can be
configured to raise interrupt when it received WoL magic packet.
This patch use gpio-keys as wakeup source for Wake on LAN as currently
there is no way to use the GPIO directly under mvneta driver.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
The SoC provides several waking options sourced by different peripherals
to take the system out of power save modes. One of the options is Wake
on GPIO.
This patch implements missing function to support gpio as wakeup source
and properly route it to upper interrupt controller (Arm GIC).
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
