* Solve compatibility issues for some of wifi patches, disable those that needs more work
* Fix 8812au
* Update to re-enable RTL88x2CS driver for 5.19.2+
* Add 8723ds and rename others
* Following naming convention
* Name
* Adjust UWE5622 for 5.19.2
* Update UWE5622 patch for sunxi
* Enable last one
* Fixes for 8723DU
Co-authored-by: Vyacheslav Bocharov <adeep@lexina.in>
* sunxi-5.19: Initial state for megous patches
* Add the ability to do 5.19
* Move to 5.19
- tested both
- removed broken Opi Zero xradio driver https://armbian.atlassian.net/browse/AR-1280
* sunxi-5.19: fix tag for switch
* sunxi-5.19: Initial state for armbian patches
* sunxi-5.19: Add armbian patches to series.conf file
* sanxi-5.19: Add other 2 patches
* sunxi-5.19: Limit to use the 'wireless/xradio' module
Limit the kernel version to less than 5.19 to use
the 'wireless/xradio' module
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* meson64-edge/5.19: use `tag:v5.19-rc2`, meson64 kernel config and kernel patches, by @adeepv
* meson64-edge/5.19: we don't need `CONFIG_ARCH_ROCKCHIP=y` for meson64, right?
* meson64-edge/5.19: remove `meson_drv_shutdown` revert patch, instead `CONFIG_DRM_MESON=y` and its dependencies in .config
- this allows other meson64's to shutdown properly, while allowing the N2(+) to reboot without kernel-side hangs
* meson64-edge/5.19: odroidn2(+): remove SD UHS modes patch for ODROID N2(+)
- it works when cold-booted
- but changes voltage to enable
- when rebooted, voltage persists and uboot can't read the SD anymore
- adding the "odroid,reboot" driver+dt that is supposed to fix this, doesn't
- so for now remove it
* meson64-edge/5.19: odroidn2(+): add dumb gpio fan at 30 celsius
- backport from rework in 5.10
* meson64-edge/5.19: odroidhc4: bring back `fan1_input` by adding fan details to DT
- yeah, I know; the cooling map is right there too, so empty, poor thing. for later.
* meson64-edge/5.19: bump to 5.19-rc3
* meson64-edge/5.19: radxa-zero: add patch to remove UHS mode so `wifi` works
- sent by @pyavitz: https://raw.githubusercontent.com/pyavitz/debian-image-builder/feature/patches/amlogic/radxazero/wifi/001-arm64-dts-amlogic-radxa-zero-sdio-card-speed.patch
- tested by @lanefu
* meson64-edge/5.19: bump to 5.19-rc4
* meson64-edge/5.19: bump to 5.19-rc5
* meson64-edge/5.19: bump to 5.19-rc7
* meson64-edge/5.19: bump to 5.19.y branch, which is 5.19.0 right now
* Add kernel config - tested on Odroid N2+
Co-authored-by: Vyacheslav Bocharov <adeep@lexina.in>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
- uefi-arm64-edge/5.19: add patch for ACPI enablement of PHYT0004 onboard network card
- reworked 5.10 version of patch to 5.19, trivial datatype change
- sent by Dragonbox/Pythium person via @lanefu
- uefi-(arm64|x86)-edge/5.19: split patch dir from x86, otherwise identical
* Skip applying fixes for touchscreen: goodix.
This device is not supported by armbian.
Patch fixes cannot be tested on real hardware.
* Bring the patch format to the form git-format-patch
for application by the `git am` command.
* This disables support for the RockPI-S "SDNAND" soldered on EMMC storage
Without it, SDNAND functions
There are no issues on boards that lack the EMMC storage option
In this case, the kernel probes the chip, quietly fails and continues without
creating the corresponding /dev/mmcblk* nodes
* This patch attempts to enable CPU operating points that are not defined.
The result is that the cpufreq-dt driver aborts when attempting to process these incompletely defined nodes.
The CPU ends up running at a constant clock rate, without cpufreq support.
Simply removing the patch restores proper cpufreq operation.
Note, however, that the CPU operating points are still overvolted for the newer RK3308B-S SOC.
See:
https://dl.radxa.com/rockpis/docs/sw/RK3308B-S&RK3308H-S_Software_Compatibility_Introduction_V1.0.0_20211016.pdf
* sunxi-5.18: add megous patches: tag: orange-pi-5.18-20220627-1924
* tools: mk_format_patch: ignore-matching-lines git version
* sunxi-5.18: re-extracted armbian patches after being applied to 5.18.8
* sunxi-5.18: switch to version tag=v5.18.8
* sunxi-5.18: add new megous patches
* switch to v5.18.5: exclude a previously applied patch
* fix: tools/mk_format_patch: numbered=false by default
* sunxi-5.18: rebasing and extraction using the mk_format_patch script
* Refactor patches
* Fix bug: the USB closed to the HDMI doesn't work
* Fix bug: cpufreq doesn't work
* Fix bug: thermal_zone doesn't work
* More frequency governors
* Add bootscript
* Fix bug: add missing dependency
needed for gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf
* sunxi-5.18: rebase megous patces to v5.18.3
* sunxi-5.18: Add upstream patches - tag: orange-pi-5.18-20220609-1318
* Check applicability to version 5.18.3
* sunxi-5.18: switch to version 5.18.3
* Update kernel configs
* Switch sunxi edge to 5.18.y
* Move sunxi to 5.18.y and re-enable AUFS
* Change version - temporally to make a build from here
* Update config
* 88xx was fixed in the mean time.
* Put version back
* Fix sunxi legacy, disable aufs on 5.10.y since its broken
* Upstream changed in the mean time
* Add a patch to enable 8821cu compilation at 5.18
https://github.com/armbian/build/pull/3814
* Re-enable CONFIG_RTL8822BU in edge
* Update CONFIG_RTL8XXXU
* Bump imx6
* Bump uefi kernels to 5.18.y
* Bump mvebu64 and switch odroid xu4 to 5.18
* sunxi-5.18 Initial state for armbian patches
* Adapting patches to the new kernel, sort, add new megous patches
* DEBUG
* Add the latest patches
* fix: compile error
drivers/spi/spi.c:3548:3: note: in expansion of macro ‘dev_info’
dev_info(&spi->dev, "spi_setup / gpio_is_valid(%d) ... doing gpio_request ...\n", spi->cs_gpio);
^~~~~~~~
drivers/spi/spi.c:3549:9: error:
implicit declaration of function ‘gpio_request’;
did you mean ‘gpio_to_desc’? [-Werror=implicit-function-declaration]
ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
^~~~~~~~~~~~
gpio_to_desc
drivers/spi/spi.c:3549:27: error:
‘struct spi_device’ has no member named ‘cs_gpio’;
did you mean ‘cs_gpiod’?
ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
^~~~~~~
cs_gpiod
drivers/spi/spi.c:3554:4: error:
implicit declaration of function ‘gpio_direction_output’;
did you mean ‘gpiod_direction_output’? [-Werror=implicit-function-declaration]
gpio_direction_output(spi->cs_gpio,
^~~~~~~~~~~~~~~~~~~~~
gpiod_direction_output
drivers/spi/spi.c:3554:31: error:
‘struct spi_device’ has no member named ‘cs_gpio’;
did you mean ‘cs_gpiod’?
gpio_direction_output(spi->cs_gpio,
^~~~~~~
cs_gpiod
In file included from ./include/linux/device.h:15,
from drivers/spi/spi.c:8:
drivers/spi/spi.c:3556:79: error:
‘struct spi_device’ has no member named ‘cs_gpio’;
did you mean ‘cs_gpiod’?
* Remove pre-applied patches
* sunxi-5.17: update and switch to version 5.17.11
* remove the patch that appeared in the upstream kernel
upstream commit c06a99a6605f524ff5ef096646e9501fc905366e
* sunxi-5.17: Fix include uapi spi spidev module
* add a compatible string alias "spi-dev" for spidev module
* overlay: Change the string compatible "spidev" to "spi-dev"
* remove unused patches
* drv: spi: spidev: fix header uapi
* Add alias "spi-dev" for module spidev
Add the armbian alias "spi-dev" to load and
initialize the spidev module from the device tree.
* Move patches for orangepi3-lts to series
* Remove unused patches
This resolves a bug that affects r8153b USB network interface causing the RX interface to hang on load.
On some xHCI controllers (e.g. Rockchip RK3399/RK3328/RK1808),
they need to enable the ENT flag in the TRB data structure
to force xHC to prefetch the next TRB of a TD.
The quirk patch is already applied to dwc3 xhci usb on rockchip64.
Enable the quirk on RK3328 through device tree node properties in rk3328.dtsi
