- have absolutely no idea if this works. there's also some other `armv5` variants to try if this does not.
- XU4's CPU is Exynos5422 ARM Cortex-A15 which should be armv7-a indeed, so why not?
- i.MX 6 series is ARM Cortex-A9 or Cortex-A7, which should be armv7-a indeed, so why not?
- ARMADA A388 is 32-bit Cortex A9, which should be armv7-a indeed, so why not?
- sharing most UEFI code, will replace the `virtual` one soon
- x86: patch uboot defconfig to use the `q35` machine type, not `i440fx`
- separate x86 bootscript, due to non-uInitrd-ness of it
- hack ramdisk load address both in u-boot source and bootscript
- use 32-bit u-boot, not 64-bit
- grub: introduce `UEFI_GRUB=skip`, does not deploy GRUB (but does the kernel packages, etc)
- auto-enable qcow2 output for these
- works with both distro's and Armbian's kernels
U-boot-rockchip64. No code changes. Original patch applied and new patch generated then mbox tweaked to retain relevant details. Prevents patching errors in armbian-next.
* Fixed u-boot v2022.07 compilation for Helios64
* Move Helios64 back from EOS to community supported as images can be assembled
Co-authored-by: Igor <igor@armbian.com>
- notes in the board file about the RAM issues (tested, confirmed working blob change of #4383 by @pinhaozhang working with u-boot 21.07; `blobless` also works with ATF v2.7 on my known-good-RAM boards)
- tinkerboard-2: add full firmware, for the rtl8822ce PCIe Wifi default card in the tb2 as shipped by ASUS
- tinkerboard-2: uboot: rename `TARGET_TINKER-2_RK3399` to `TARGET_TINKER2_RK3399` to avoid warnings all over
- tinkerboard-2: slower but working Tinkerboard 2S eMMC (HS400+ES to HS200)
- both for u-boot and kernel.
- should not affect 2, only 2S
* `meson64`: `6.0`: g12a and g12b pinmux patches from Radxa
* u-boot: `radxa-zero2`: Radxa's patches for the Zero2 on `v2022.10`
* u-boot: `radxa-zero2`: use `v2022.10` plus Radxa's patches
* `meson64` u-boot v2022.10: change `BOOT_TARGET_DEVICES` to try to boot USB, NVME and SCSI before SD, MMC, PXE, DHCP
* `radxa-zero`: include v2022.10 standard patches (eg: boot from USB first)
* Move all legacy u-boot patches under one general legacy folder
* Move 32b Rockchip under 2022.04 and legacy for Miqi
Tested
* Move Rock 3A patch dir under legacy
* Move / merge meson64 patch folder into v2022.07
Merge 2022.04 (mainly Rockchip 32) into 2022.07, tested
* Remove not needed patch
* Add last kernel version to config
* `odroidm1`.wip: hk's `legacy`= 4.19 and `edge`= mainline+tobetter's 5.19 rebased; *requires* `skip_spiboot=true`
- @TODO: family/etc naming is terrible with vendor kernels. Sorry. Fight over it and let me know?
- @TODO: config is very probably incomplete.
- new `boot-rockchip64-vendor.cmd`:
- does not use fixed load_addr, instead use ramdisk_addr_r for everything
- load kernel and initrd as late as possible
- look for overlays twice:
- once: with prefix and folder
- twice: without prefix, nor folder; helps with vendor provided overlays like hk's and tobetter's
- wip: edge: tobetter's patchset rebased against 5.19.3
- wip: edge: bump to tobetter's 5.19
- legacy: .config `CONFIG_ARM64_VA_BITS_48=y`
- wip m1: update legacy config from odroid
- odroidm1: container/bpf stuff in legacy config
* Update configs and enable beta build target
* Adjust current kernel
* Update targets
* Remove everything but EDGE kernel
* Cleanup
* Fix
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* rock-5b: add initial raxda rock-5b .wip (by @amazingfate); vendor u-boot & kernel
- .wip board
- using BOARDFAMILY `rk35xx`, which was for rock-3a
- patch by @piter75 uboot for working 'source' command so boot.scr can be used, and not extlinux
- .config: hammer CONFIG_JOYSTICK_XPAD & CONFIG_JOYSTICK_PSXPAD_SPI
- rock5 add kernel optiions by @lanefu
- disable CONFIG_LOCALVERSION_AUTO otherwise packaging goes insane
- make its kernel is own LINUXFAMILY to as to not mess up rock-3a
- CONFIG_VT=y & SKIP_BOOTSPLASH="yes"
* Add separate family for rock 5b - rockchip-rk3588
Co-authored-by: amazingfate <liujianfeng1994@gmail.com>
Co-authored-by: root <catalinii@yahoo.com>
* tf-a sources use mrvl_flash rather than 'all' target
* add armada 8k ethernet and SFP cages for macchiatobin use
* u-boot configuration for mcbin
* fix bootscript for u-boot variables
* separate ebin and mcbin with if statements
* add a8k PCIe and CPUFreq drivers for macchiatobin
