Cortex-A510 erratum 2371937 is a Cat B erratum that applies
to revisions r0p0, r0p1, r0p2, r0p3, r1p0, and r1p1. It is
fixed in r1p2. The workaround is to set the ATOM field of
CPUECTLR_EL1 (bits [40:38]) to 0b010, which will force all
cacheable atomic operations to be executed near.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1873351/latesthttps://developer.arm.com/documentation/SDEN1873361/latest
Signed-off-by: Akram Ahmad <Akram.Ahmad@arm.com>
Change-Id: Ia219a609a3397e39631de65831ecff8a3cd1227e
This patch adds the FF-A programming model in the test
secure payload to ensure that it can be used to test
the following spec features.
1. SP initialisation on the primary and secondary cpus.
2. An event loop to receive direct requests and respond
with direct responses.
3. Ability to receive messages that indicate power on
and off of a cpu.
4. Ability to handle a secure interrupt.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Shruti <shruti.gupta@arm.com>
Change-Id: I81cf744904d5cdc0b27862b5e4bc6f2cfe58a13a
QARMA3 is a pointer authentication algorithm that generates
the PAC codes.
The is_armv8_3_pauth_present() helper was modified in order to
consider the presence of the QARMA3 algorithm (i.e.: when
ID_AA64ISAR2_EL1.{GPA3, APA3} fields are not 0.
In addition, helper is_feat_pacqarma3_present() was implemented to
explicitly detect the presence of QARMA3 algorithm.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I68e8fa7f8b7ca50d74ae0a2f5f182236d68f3d7b
FEAT_RNG_TRAP introduces support for EL3 trapping of reads of the
RNDR and RNDRRS registers, which is enabled by setting the
SCR_EL3.TRNDR bit. This patch adds a new build flag
ENABLE_FEAT_RNG_TRAP that enables the feature.
This feature is supported only in AArch64 state from Armv8.5 onwards.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: Ia9f17aef3444d3822bf03809036a1f668c9f2d89
Neoverse-N2 erratum 2376738 is a Cat B erratum that applies
to revision r0p0 of the CPU. It is fixed in r0p1. The workaround
is to set CPUACTLR2_EL1[0] to 1 to force PLDW/PFRM ST to
behave like PLD/PRFM LD and not cause invalidations to other
PE caches.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: Akram Ahmad <Akram.Ahmad@arm.com>
Change-Id: I4ad4434f9b7210244e67046d9657d218857dced5
On SD-cards, Switch Function Command (CMD6) is used to switch
functions, like setting High Speed mode. It is useful for high capacity
cards to double frequency (from 25MHz by default to 50MHz).
If the SD-card is High Capacity, a CMD6 is issued after filling the
device information. If High Speed mode is supported and the switch is
OK, then the max_bus_freq can be set to 50MHz. The driver set_ios()
function should then be called to update peripheral configuration,
especially clock prescaler.
Change-Id: I2d6807aa7f9440d2b2f907a747cd3b47a2ba1545
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Neoverse-V1 erratum 1618635 is a Cat B erratum that applies to
revision r0p0. It is fixed in r1p0.
The workaround is done through the instruction patching
mechanism, which is performed by a write sequence of
IMPLEMENTATION DEFINED registers.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1401781/latest/
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I53e406735cd3a2a930fdc72ebce3bbed97100168
When the measured boot service was upstreamed to TF-M, its static
handle was reallocated into the user partitions range. This change
updates the static handle here to make the service accessible.
Also removes the SIDs and Versions, since they are unused when a
service is accessed through a stateless handle, which encodes both
service ID and version. The attestation and measured boot services
only support access through their handles.
Signed-off-by: Jamie Fox <jamie.fox@arm.com>
Change-Id: I9d2ff1aad19470728289d574be3d5d11bdabeef4
Adding interface for stand-alone semantic version of TF-A
for exporting to RSS attestation, and potentially other areas
as well.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ib4a2c47aa1e42a3b850185e674c90708a05cda53
* changes:
feat(stm32mp1): retrieve FIP partition by type UUID
feat(guid-partition): allow to find partition by type UUID
refactor(stm32mp1): update PLAT_PARTITION_MAX_ENTRIES
Cortex-X2 erratum 2371105 is a cat B erratum that applies to
revisions r0p0 - r2p0 and is fixed in r2p1. The workaround is to
set bit[40] of CPUACTLR2_EL1 to disable folding of demand requests
into older prefetches with L2 miss requests outstanding.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ib4f0caac36e1ecf049871acdea45526b394b7bad
This patch adds documentation for the missing RMM-EL3
runtime services:
* RMM_RMI_REQ_COMPLETE
* RMM_GTSI_DELEGATE
* RMM_GTSI_UNDELEGATE
This patch also fixes a couple of minor bugs on return codes
for delegate/undelegate internal APIs.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Ic721005e7851e838eebaee7865ba78fadc3309e4
Introduce a helper function that ensures that non-boot PEs are offline.
This function will be used by DRTM implementation to ensure that system
is running with only single PE.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Signed-off-by: Lucian Paul-Trifu <lucian.paultrifu@gmail.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I521ebefa49297026b02554629b1710a232148e01
Cortex-A710 erratum 2371105 is a cat B erratum that applies to
revisions r0p0 - r2p0 and is fixed in r2p1. The workaround is to
set bit[40] of CPUACTLR2_EL1 to disable folding of demand requests
into older prefetches with L2 miss requests outstanding.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I342b095b66f808bd6c066c20c581df5341bb7c2c
Cortex A78C erratum 2242638 is a Cat B erratum which applies to
revisions r0p1, r0p2 and is still open. The workaround is to apply
a CPU implementation specific specific patch sequence.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2004089/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I35d385245a04a39b87be71c1a42312f75e1152e5
Cortex-A78C erratum 2132064 is a cat B erratum that applies to revisions
r0p1 and r0p2 and is still open.
This patch implements workaround option 2 that places the data
prefetcher in the most conservative mode to greatly reduce prefetches
by writing the following bits to the value indicated:
ecltr[7:6], PF_MODE = 2'b11
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2004089/latest
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ica2561c1e257643c2482085447ef852fa62a1eb2
This change replaces the polling loop with fixed number of retries,
returns error values and handles them in ufs_enum.
Signed-off-by: Rohit Ner <rohitner@google.com>
Change-Id: Ia769ef26703c7525091e55ff46aaae4637db933c
Neoverse-N2 erratum 2388450 is a cat B erratum that applies to
revision r0p0 and is fixed in r0p1. The workaround is to set
bit[40] of CPUACTLR2_EL1 to disable folding of demand requests into
older prefetches with L2 miss requests outstanding.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Change-Id: I6dd949c79cea8dbad322e569aa5de86cf8cf9639
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
The patch 8c980a4 created a 4KB shared region from the 32MB
Realm region for RMM-EL3 communication. But this meant that BL2
needs to map a region of 32MB - 4KB, which required more xlat
tables at runtime. This patch maps the entire 32MB region in BL2
which is more memory efficient in terms of xlat tables needed.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I17aa27545293d7b5bbec1c9132ea2c22bf2e7e65
while sbsa maintainers upstream decide whether new cpus types
should be in, add fujitsu a64fx cpu type in advance
Signed-off-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Change-Id: I521a62f1233f3fe6e92f040edaff2cc60a1bd874
Add function to return the partition by type.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: I87729dc5e68fbc45a523c894b67595b0079dd8fb
* changes:
docs(rmmd): document EL3-RMM Interfaces
feat(rmmd): add support to create a boot manifest
fix(rme): use RMM shared buffer for attest SMCs
feat(rmmd): add support for RMM Boot interface
This patch also adds an initial RMM Boot Manifest (v0.1) for fvp
platform.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I1374f8f9cb207028f1820953cd2a5cf6d6c3b948
Use the RMM shared buffer to attestation token and signing key SMCs.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I313838b26d3d9334fb0fe8cd4b229a326440d2f4
This patch adds the infrastructure needed to pass boot arguments from
EL3 to RMM and allocates a shared buffer between both worlds that can
be used, among others, to pass a boot manifest to RMM. The buffer is
composed a single memory page be used by a later EL3 <-> RMM interface
by all CPUs.
The RMM boot manifest is not implemented by this patch.
In addition to that, this patch also enables support for RMM when
RESET_TO_BL31 is enabled.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I855cd4758ee3843eadd9fb482d70a6d18954d82a
Define the MBEDTLS_CHECK_RETURN_WARNING macro in mbedTLS configuration
file to get compile-time warnings for mbedTLS functions we call and do
not check the return value of. Right now, this does not flag anything
but it could help catching bugs in the future.
This was a new feature introduced in mbed TLS 2.28.0 release.
Change-Id: If26f3c83b6ccc8bc60e75c3e582ab20817d047aa
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
* changes:
feat(arm): retrieve the right ROTPK for cca
feat(arm): add support for cca CoT
feat(arm): provide some swd rotpk files
build(tbbr): drive cert_create changes for cca CoT
refactor(arm): add cca CoT certificates to fconf
feat(fiptool): add cca, core_swd, plat cert in FIP
feat(cert_create): define the cca chain of trust
feat(cca): introduce new "cca" chain of trust
build(changelog): add new scope for CCA
refactor(fvp): increase bl2 size when bl31 in DRAM
* changes:
refactor(arm): update BL2 base address
refactor(nxp): use DPG0 mask from Arm GICv3 header
fix(gic600): implement workaround to forward highest priority interrupt
With RSS now introduced, we have 2 Measured Boot backends. Both backends
can be used in the same firmware build with potentially different hash
algorithms, so now there can be more than one hash algorithm in a build.
Therefore the logic for selecting the measured boot hash algorithm needs
to be updated and the coordination of algorithm selection added. This is
done by:
- Adding MBOOT_EL_HASH_ALG for Event Log to define the hash algorithm
to replace TPM_HASH_ALG, removing reference to TPM.
- Adding MBOOT_RSS_HASH_ALG for RSS to define the hash algorithm to
replace TPM_HASH_ALG.
- Coordinating MBOOT_EL_HASH_ALG and MBOOT_RSS_HASH_ALG to define the
Measured Boot configuration macros through defining
TF_MBEDTLS_MBOOT_USE_SHA512 to pull in SHA-512 support if either
backend requires a stronger algorithm than SHA-256.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I4ddf06ebdc3835beb4d1b6c7bab5a257ffc5c71a
Cortex-A77 erratum 2356587 is a cat B erratum that applies to revisions
r0p0 - r1p1 and is still open. The workaround is to set bit[0] of
CPUACTLR2_EL1 to force PLDW/PFRM ST to behave like PLD/PRFM LD and not
cause invalidations to other PE caches.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1152370/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I243cfd587bca06ffd2a7be5bce28f8d2c5e68230
Neoverse-V1 erratum 2372203 is a cat B erratum that applies to revisions
r0p0 - r1p1 and is still open. The workaround is to set bit[40] of
CPUACTLR2_EL1 to disable folding of demand requests into older
prefetches with L2 miss requests outstanding.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1401781/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ice8c2e5a0152972a35219c8245a2e07e646d0557
BL2 base address updated to provide enough space for BL31 in
Trusted SRAM when building with BL2_AT_EL3 and ENABLE_PIE options.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ieaba00d841648add855feb99b7923a4b0cccfb08
Removed GICR_CTLR_DPG0_MASK definition from platform GIC header file
as Arm GICv3 header file added its definition.
Change-Id: Ieec43aeef96b9b6c8a7f955a8d145be6e4b183c5
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
If the interrupt being targeted is released from the CPU before the
CLEAR command is sent to the CPU then a subsequent SET command may not
be delivered in a finite time. To workaround this, issue an unblocking
event by toggling GICR_CTLR.DPG* bits after clearing the cpu group
enable (EnableGrp* bits of GIC CPU interface register)
This fix is implemented as per the errata 2384374-part 2 workaround
mentioned here:
https://developer.arm.com/documentation/sden892601/latest/
Change-Id: I13926ceeb7740fa4c05cc5b43170e7ce49598f70
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added support for cca CoT in the fiptool by adding the cca,
core_swd, and plat key certificates.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I1ba559e188ad8c33cb0e643d7a2fc6fb96736ab9
This chain of trust is targeted at Arm CCA solutions and defines 3
independent signing domains:
1) CCA signing domain. The Arm CCA Security Model (Arm DEN-0096.A.a) [1]
refers to the CCA signing domain as the provider of CCA components
running on the CCA platform. The CCA signing domain might be independent
from other signing domains providing other firmware blobs.
The CCA platform is a collective term used to identify all hardware and
firmware components involved in delivering the CCA security guarantee.
Hence, all hardware and firmware components on a CCA enabled system that
a Realm is required to trust.
In the context of TF-A, this corresponds to BL1, BL2, BL31, RMM and
associated configuration files.
The CCA signing domain is rooted in the Silicon ROTPK, just as in the
TBBR CoT.
2) Non-CCA Secure World signing domain. This includes SPMC (and
associated configuration file) as the expected BL32 image as well as
SiP-owned secure partitions. It is rooted in a new SiP-owned key called
Secure World ROTPK, or SWD_ROTPK for short.
3) Platform owner signing domain. This includes BL33 (and associated
configuration file) and the platform owner's secure partitions. It is
rooted in the Platform ROTPK, or PROTPK.
[1] https://developer.arm.com/documentation/DEN0096/A_a
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I6ffef3f53d710e6a2072fb4374401249122a2805
Neoverse-V1 erratum 2294912 is a cat B erratum that applies to revisions
r0p0 - r1p1 and is still open. The workaround is to set bit[0] of
CPUACTLR2_EL1 to force PLDW/PFRM ST to behave like PLD/PRFM LD and not
cause invalidations to other PE caches.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1401781/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ia7afb4c42fe66b36fdf38a7d4281a0d168f68354
This patch splits the el2_sysregs_context_save/restore functions
into multiple functions based on features. This will allow us to
selectively save and restore EL2 context registers based on
features enabled for a particular configuration.
For now feature build flags are used to decide which registers
to save and restore. The long term plan is to dynamically check
for features that are enabled and then save/restore registers
accordingly. Splitting el2_sysregs_context_save/restore functions
into smaller assembly functions makes that task easier. For more
information please take a look at:
https://trustedfirmware-a.readthedocs.io/en/latest/design_documents/context_mgmt_rework.html
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I1819a9de8b70fa35c8f45568908025f790c4808c
Replay-protected memory block access is enabled by writing 0x3
to PARTITION_ACCESS (bit[2:0]). Instead the driver is using the
first boot partition, which does not provide any playback protection.
Additionally, it unconditionally activates the first boot partition,
potentially breaking boot for SoCs that consult boot partitions,
require boot ack or downgrading to an old bootloader if the first
partition happens to be the inactive one.
Also, neither enabling or disabling the RPMB observes the
PARTITION_SWITCH_TIME. As there are no in-tree users for these
functions, drop them for now until a properly functional implementation
is added. That one will likely share most code with the existing boot
partition switch, which doesn't suffer from the described issues.
Change-Id: Ia4a3f738f60a0dbcc33782f868cfbb1e1c5b664a
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
This change adds "FEAT_TRBE" to be part of feature detection mechanism.
Previously feature enablement flags were of boolean type, containing
either 0 or 1. With the introduction of feature detection procedure
we now support three states for feature enablement build flags(0 to 2).
Accordingly, "ENABLE_TRBE_FOR_NS" flag is now modified from boolean
to numeric type to align with the feature detection.
Change-Id: I53d3bc8dc2f6eac63feef22dfd627f3a48480afc
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
This change adds "FEAT_BRBE" to be part of feature detection mechanism.
Previously feature enablement flags were of boolean type, possessing
either 0 or 1. With the introduction of feature detection procedure
we now support three states for feature enablement build flags(0 to 2).
Accordingly, "ENABLE_BRBE_FOR_NS" flag is now modified from boolean
to numeric type to align with the feature detection.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I1eb52863b4afb10b808e2f0b6584a8a210d0f38c
Disabling access to the boot partition reverts the MMC to read from the
user area. Add a macro to make this clearer.
Suggested-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Change-Id: I34a5a987980bb4690d08d255f465b11a4697ed5a
At the moment, mmc_boot_part_read_blocks() takes care to switch
to the boot partition before transfer and back afterwards.
This can introduce large overhead when reading small chunks.
Give consumers of the API more control by exporting
mmc_part_switch_current_boot() and mmc_part_switch_user().
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Change-Id: Ib641f188071bb8e0196f4af495ec9ad4a292284f
This patch fixes the following encodings in the System register
encoding space for the MPAM registers. The encodings now match
with the Arm® Architecture Reference Manual Supplement for MPAM.
* MPAMVPM0_EL2
* MPAMVPM1_EL2
* MPAMVPM2_EL2
* MPAMVPM3_EL2
* MPAMVPM4_EL2
* MPAMVPM5_EL2
* MPAMVPM6_EL2
* MPAMVPM7_EL2
* MPAMVPMV_EL2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ib339412de6a9c945a3307f3f347fe7b2efabdc18
Add SP entries to event_log_metadata if SPD_spmd is enabled. Otherwise
the platform cannot boot with measured boot enabled.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: I525eb50e7bb60796b63a8c7f81962983017bbf87
* changes:
feat(fvp): add plat hook for memory transactions
feat(spmc): enable handling of the NS bit
feat(spmc): add support for v1.1 FF-A memory data structures
feat(spmc/mem): prevent duplicated sharing of memory regions
feat(spmc/mem): support multiple endpoints in memory transactions
feat(spmc): add support for v1.1 FF-A boot protocol
feat(plat/fvp): introduce accessor function to obtain datastore
feat(spmc/mem): add FF-A memory management code
In FF-A v1.1 the NS bit is used by the SPMC to specify the
security state of a memory region retrieved by a SP.
Enable the SPMC to set the bit for v1.1 callers or v1.0
callers that explicitly request the usage via FFA_FEATURES.
In this implementation the sender of the memory region must
reside in the normal world and the SPMC does not support
changing the security state of memory regions therefore
always set the NS bit if required by the caller.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I215756b28e2382082933ba1dcc7584e7faf4b36b
Add support for the FF-A v1.1 data structures to the EL3 SPMC
and enable the ability to convert between v1.0 and the v1.1
forwards compatible data structures.
The SPMC now uses the v1.1 data structures internally and will
convert descriptors as required depending on the FF-A version
supported by the calling partition.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: Ic14a95ea2e49c989aecf19b927a6b21ac50f863e
Enable FFA_MEM_LEND and FFA_MEM_SHARE transactions to support multiple
borrowers and add the appropriate validation. Since we currently
only support a single S-EL1 partition, this functionality is to
support the use case where a VM shares or lends memory to one or
more VMs in the normal world as part of the same transaction to
the SP.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: Ia12c4357e9d015cb5f9b38e518b7a25b1ea2e30e
A partition can request the use of the FF-A boot protocol via
an entry in its manifest along with the register (0-3)
that should be populated with a pointer to a data structure
containing boot related information. Currently the boot
information consists of an allocated memory region
containing the SP's manifest, allowing it to map and parse
any extra information as required.
This implementation only supports the v1.1 data structures
and will return an error if a v1.0 client requests the usage
of the protocol.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I67692553a90a7e7d94c64fe275edd247b512efca
In order to provide the EL3 SPMC a sufficient datastore to
record memory descriptors, a accessor function is used.
This allows for the backing memory to be allocated in a
platform defined manner, to accommodate memory constraints
and desired use cases.
Provide an implementation for the Arm FVP platform to
use a default value of 512KB memory allocated in the
TZC RAM section.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I92bc55ba6e04bdad429eb52f0d2960ceda682804
Originally taken from the downstream Trusty SPD [1]
implementation and modified to integrate with
the EL3 SPMC internals.
Add support to the EL3 SPMC for a subset of the FF-A
memory management ABIs:
- FFA_MEM_SHARE
- FFA_MEM_LEND
- FFA_MEM_RETRIEVE_REQ
- FFA_MEM_RETRIEVE_RESP
- FFA_MEM_RELINQUISH
- FFA_MEM_RECLAIM
- FFA_MEM_FRAG_RX
- FFA_MEM_FRAG_TX
This implementation relies on a datastore allocated in
platform specific code in order to store memory descriptors
about ongoing memory transactions. This mechanism
will be implemented in the following commit.
[1] https://android.googlesource.com/trusty/external/trusted-firmware-a/+/refs/heads/master/services/spd/trusty/
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: Ib042f73c8a6e0f0aed00f6762be175cb9dedc042
Created a function to abort all pending NS DMA transactions to
engage complete DMA protection. This call will be used by the
subsequent DRTM implementation changes.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Signed-off-by: Lucian Paul-Trifu <lucian.paultrifu@gmail.com>
Change-Id: I94992b54c570327d6746295073822a9c0ebdc85d
This change makes use of 32-bit crc for calculating gpt header crc
and compares it with the given value.
Signed-off-by: Rohit Ner <rohitner@google.com>
Change-Id: I49bca7aab2c3884881c4b7d90d31786a895290e6
* changes:
feat(spmd): allow forwarding of FFA_FRAG_RX/TX calls
feat(spmc): add support for FFA_SPM_ID_GET
feat(spmc): add support for forwarding a secure interrupt to the SP
feat(spmc): add support for FF-A power mgmt. messages in the EL3 SPMC
Enable the SPMD to forward FFA_FRAG_RX/TX calls between
the normal world and the SPMC.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I097a48552827a8527dd3efe1155bc601d7cbf887
This patch adds support for forwarding the following PSCI messages
received by the SPMC at EL3 to the S-EL1 SP if the SP has indicated
that it wishes to receive the appropriate message via its manifest.
1. A PSCI CPU_OFF message in response to a cpu hot unplug request
from the OS.
2. A message to indicate warm boot of a cpu in response to a cpu
hot plug request from the OS.
3. A PSCI CPU_SUSPEND message in response to a cpu idle event
initiated from the OS.
4. A message to indicate warm boot of a cpu from a shallow power
state in response to a cpu resume power event.
This patch also implements the FFA_SECONDARY_EP_REGISTER function to
enable the SP specify its secondary entrypoint.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I375d0655b2c6fc27445facc39213d1d0678557f4
Enable the SPMC to handle calls to FFA_PARTITION_INFO_GET.
This allows the normal world to discover which partitions
are running in the secure world including logical partitions
in EL3.
This implementation supports both the v1.0 and v1.1
implementations of the Partition Info Get Descriptor.
The SPMC populates the appropriate descriptor in the
partitions RX buffer, if requested, according to the
version of FF-A that the caller is using.
Additionally rename the common/uuid UUID_H include guard
due to a conflict with another header file.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I0a85f1dae50fae1fe47a3cafb765fbe9f40619e1
When RECLAIM_INIT_CODE is enabled, functions with __init attribute can
be reclaimed after boot and marked as Execute Never.
Because of a bug in linker script the functions starting with "init"
were also marked XN and causing instruction abort.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I2221973c05af170acf4e723cd44645b9ff9d58d2
Implements the loop workaround for Cortex Makalu/Makalu-ELP/Hunter
and Neoverse Demeter/Poseidon.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: If5f6689b662ecac92491e0c0902df4270051ce5b
DSU-110 erratum 2313941 is a Cat B erratum and applies to revisions
r0p0, r1p0, r2p0, r2p1, r3p0, r3p1 and is still open.
The workaround sets IMP_CLUSTERACTLR_EL1[16:15] bits to 0b11 to disable
clock gating of the SCLK domain. This will increase the idle power
consumption.
This patch applies the fix for Cortex-X2/A510/A710 and Neoverse N2.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1781796/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I54d948b23e8e01aaf1898ed9fe4e2255dd209318
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Enable the RSS backend based measured boot feature.
In the absence of RSS the mocked version of PSA APIs
are used. They always return with success and hard-code data.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: I7543e9033a7a21f1b836d911d8d9498c6e09b956
Runtime Security Subsystem (RSS) provides for the host:
- Runtime service to store measurments, which were
computed by the host during measured boot.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: Ia9e4e8a1fe8f01a28da1fd8c434b780f2a08f94e
This commit adds a driver to conduct the AP's communication
with the Runtime Security Subsystem (RSS).
RSS is Arm's reference implementation for the CCA HES [1].
It can be considered as a secure enclave to which, for example,
certain services can be offloaded such as initial attestation.
RSS comms driver:
- Relies on MHU v2.x communication IP, using a generic MHU API,
- Exposes the psa_call(..) API to the upper layers.
[1] https://developer.arm.com/documentation/DEN0096/latest
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Signed-off-by: David Vincze <david.vincze@arm.com>
Change-Id: Ib174ac7d1858834006bbaf8aad0eb31e3a3ad107
Supports:
- Get Platform Attestation token from secure enclave
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: Icaeb7b4eaff08e10f449fbf752068de3ac7974bf
A secure enclave could provide an alternate
backend for measured boot. This API can be used
to store measurements in a secure enclave, which
provides the measured boot runtime service.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: I2448e324e7ece6b318403c5937dfe7abea53d0f3
The Arm Message Handling Unit (MHU) is a mailbox controller used to
communicate with other processing element(s). Adding a driver to
enable the communication:
- Adding generic MHU driver interface,
- Adding MHU_v2_x driver.
Driver supports:
- Discovering available MHU channels,
- Sending / receiving words over MHU channels,
- Signaling happens over a dedicated channel.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Signed-off-by: David Vincze <david.vincze@arm.com>
Change-Id: I41a5b968f6b8319cdbdf7907d70bd8837839862e
This patch adds workarounds for following cortex-x1 errata:
- 1821534 (CatB)
- 1688305 (CatB)
- 1827429 (CatB)
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1401782/latest
Signed-off-by: Okash Khawaja <okash@google.com>
Change-Id: I10ebe8d5c56a6d273820bb2c682f21bf98daa7a5
This patch adds basic CPU library code to support Cortex-X1 CPU in TF-A.
Follow-up patches will add selected errata workarounds for this CPU.
Signed-off-by: Okash Khawaja <okash@google.com>
Change-Id: I4a3d50a98bf55a555bfaefeed5c7b88a35e3bc21
