* Docs: API secret/ssh clarity on Create & Update
Added clarity notes on required permissions (`update` & `create`) that's otherwise not obvious without experience of other mounts that have requirements for similar ACL to manage. Resolves#9888.
* Update website/content/api-docs/secret/ssh.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Update website/content/api-docs/secret/ssh.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Docs: API secret/ssh clarity on Create & Update...
Reduced text (-1 line) further to feedback from @benashz; retaining details on `create` vs `update` difference as per [API transit method that calls this out too.](https://www.vaultproject.io/api-docs/secret/transit#encrypt-data)
* trigger ci
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
Co-authored-by: Yoko Hyakuna <yoko@hashicorp.com>
Extend the documentation the API endpoint '/ssh/issue/:name' (added
in #15561 with v1.12.0) and '/ssh/issue/:name':
- Be more specific that the issued certificate uses the defaults
given of the role at the given endpoint; and that it is subject
to the limitations configured in this role.
- Note that the endpoint /ssh/issue/:name is available with v1.12+.
- Make it more clear that the generated credentials are only returned
but not stored by Vault (not just the generated private key).
* Add support for PKCSv1_5_NoOID signatures
This assumes a pre-hashed input has been provided to Vault, but we do
not write the hash's OID into the signature stream. This allows us to
generate the alternative PKCSv1_5_NoOID signature type rather than the
existing PKCSv1_5_DERnull signature type we presently use.
These are specified in RFC 3447 Section 9.2.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Exclude new none type from PSS based tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for PKCS#1v1.5 signatures
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow passing AssociatedData factories in keysutil
This allows the high-level, algorithm-agnostic Encrypt/Decrypt with
Factory to pass in AssociatedData, and potentially take multiple
factories (to allow KMS keys to work). On AEAD ciphers with a relevant
factory, an AssociatedData factory will be used to populate the
AdditionalData field of the SymmetricOpts struct, using it in the AEAD
Seal process.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add associated_data to Transit Encrypt/Decrypt API
This allows passing the associated_data (the last AD in AEAD) to
Transit's encrypt/decrypt when using an AEAD cipher (currently
aes128-gcm96, aes256-gcm96, and chacha20-poly1305). We err if this
parameter is passed on non-AEAD ciphers presently.
This associated data can be safely transited in plaintext, without risk
of modifications. In the event of tampering with either the ciphertext
or the associated data, decryption will fail.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add to documentation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow OCSP to use issuer's RevocationSigAlgo
When an issuer specifies a RevocationSigAlgo, we should largely follow
this for both CRLs and OCSP. However, x/crypto/ocsp lacks support for
PSS signatures, so we drop these down to PKCS#1v1.5 instead.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when issuer has PSS-based RevSigAlgo
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add note about OCSP and PSS support
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* PKI: Add support for signature_bits param to the intermediate/generate api
- Mainly to work properly with GCP backed managed keys, we need to
issue signatures that would match the GCP key algorithm.
- At this time due to https://github.com/golang/go/issues/45990 we
can't issue PSS signed CSRs, as the libraries in Go always request
a PKCS1v15.
- Add an extra check in intermediate/generate that validates the CSR's
signature before providing it back to the client in case we generated
a bad signature such as if an end-user used a GCP backed managed key
with a RSA PSS algorithm.
- GCP ignores the requested signature type and always signs with the
key's algorithm which can lead to a CSR that says it is signed with
a PKCS1v15 algorithm but is actually a RSA PSS signature
* Add cl
* PR feedback
* docs/api-docs for Redis
* update doc
* add navigation to the docs
* Update website/content/api-docs/secret/databases/redis.mdx
Co-authored-by: Austin Gebauer <34121980+austingebauer@users.noreply.github.com>
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Austin Gebauer <34121980+austingebauer@users.noreply.github.com>
* update setup list and lang tag for shell code blocks
* update language tag
* update based on suggestions
* update docs to include tls params
* add plugin to the plugin portal doc
* add -
* update api-docs-nav-data.json
* update field name
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* Update website/content/docs/secrets/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* Update website/content/api-docs/secret/databases/redis.mdx
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* update docs
Co-authored-by: Austin Gebauer <34121980+austingebauer@users.noreply.github.com>
Co-authored-by: Robert <17119716+robmonte@users.noreply.github.com>
* add api docs for transform byok endpoints
* add byok description to transform index page
* fix merge conflicts
* remove import_version for FPE
* text edits and add note about convergent tokenization
* add note for convergent tokenization
* Add more notes about issuer revocation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Note BYOC in considerations
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add note about http access to CRLs, OCSP
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Recommend enabling auto-tidy & crl rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing paths to personas
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
- Update the documentation in regards to the private_key_format
argument only controls the behavior of the private_key response field
and does not modify the encoding of the private key within the
pem_bundle.
* Get import correct
* limits, docs
* changelog
* unit tests
* And fix import for hmac unit test
* typo
* Update website/content/api-docs/secret/transit.mdx
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
* Update builtin/logical/transit/path_keys.go
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
* Validate key sizes a bit more carefully
* Update sdk/helper/keysutil/policy.go
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
Co-authored-by: Matt Schultz <975680+schultz-is@users.noreply.github.com>
* Add path to manually rebuild delta CRLs
The crl/rotate-delta path behaves like crl/rotate, triggering a
cluster-local rebuild of just the delta CRL. This is useful for when
delta CRLs are enabled with a longer-than-desired auto-rebuild period
after some high-profile revocations occur.
In the event delta CRLs are not enabled, this becomes a no-op.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for Delta CRL rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update documentation about Delta CRLs
Also fixes a omission in the If-Modified-Since docs to mention that the
response header should probably also be passed through.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy operations to be cancelled
When tidy operations take a long time to execute (and especially when
executing them automatically), having the ability to cancel them becomes
useful to reduce strain on Vault clusters (and let them be rescheduled
at a later time).
To this end, we add the /tidy-cancel write endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing auto-tidy synopsis / description
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add a pause duration between tidying certificates
By setting pause_duration, operators can have a little control over the
resource utilization of a tidy operation. While the list of certificates
remain in memory throughout the entire operation, a pause is added
between processing certificates and the revocation lock is released.
This allows other operations to occur during this gap and potentially
allows the tidy operation to consume less resources per unit of time
(due to the sleep -- though obviously consumes the same resources over
the time of the operation).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for cancellation, pause
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add API docs on pause_duration, /tidy-cancel
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add lock releasing around tidy pause
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Reset cancel guard, return errors
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* accommodate salt lengths for RSA PSS
* address feedback
* generalise salt length to an int
* fix error reporting
* Revert "fix error reporting"
This reverts commit 8adfc15fe3303b8fdf9f094ea246945ab1364077.
* fix a faulty check
* check for min/max salt lengths
* stringly-typed HTTP param
* unit tests for sign/verify HTTP requests
also, add marshaling for both SDK and HTTP requests
* randomly sample valid salt length
* add changelog
* add documentation
* Add remove_roots_from_chain flag to sign and issue pki apis
- Add a new flag to allow end-users to control if we return the
root/self-signed CA certificate within the list of certificates in
ca_chain field on issue and sign api calls.
* Add cl
* PR feedback
* Add ability to perform automatic tidy operations
This enables the PKI secrets engine to allow tidy to be started
periodically by the engine itself, avoiding the need for interaction.
This operation is disabled by default (to avoid load on clusters which
don't need tidy to be run) but can be enabled.
In particular, a default tidy configuration is written (via
/config/auto-tidy) which mirrors the options passed to /tidy. Two
additional parameters, enabled and interval, are accepted, allowing
auto-tidy to be enabled or disabled and controlling the interval
(between successful tidy runs) to attempt auto-tidy.
Notably, a manual execution of tidy will delay additional auto-tidy
operations. Status is reported via the existing /tidy-status endpoint.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Prevent race during parallel testing
We modified the RollbackManager's execution window to allow more
faithful testing of the periodicFunc. However, the TestAutoRebuild and
the new TestAutoTidy would then race against each other for modifying
the period and creating their clusters (before resetting to the old
value).
This changeset adds a lock around this, preventing the races.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use tidyStatusLock to gate lastTidy time
This prevents a data race between the periodic func and the execution of
the running tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add read lock around tidyStatus gauges
When reading from tidyStatus for computing gauges, since the underlying
values aren't atomics, we really should be gating these with a read lock
around the status access.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* honor header if-modified-since if present
* pathGetIssuerCRL first version
* check if modified since for CA endpoints
* fix date comparison for CA endpoints
* suggested changes and refactoring
* add writeIssuer to updateDefaultIssuerId and fix error
* Move methods out of storage.go into util.go
For the most part, these take a SC as param, but aren't directly storage
relevant operations. Move them out of storage.go as a result.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Use UTC timezone for storage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rework path_fetch for better if-modified-since handling
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Invalidate all issuers, CRLs on default write
When the default is updated, access under earlier timestamps will not
work as we're unclear if the timestamp is for this issuer or a previous
issuer. Thus, we need to invalidate the CRL and both issuers involved
(previous, next) by updating their LastModifiedTimes.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for If-Modified-Since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invalidate default issuer changes
When the default issuer changes, we'll have to mark the invalidation on
PR secondary clusters, so they know to update their CRL mapping as well.
The swapped issuers will have an updated modification time (which will
eventually replicate down and thus be correct), but the CRL modification
time is cluster-local information and thus won't be replicated.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* make fmt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor sendNotModifiedResponseIfNecessary
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on if-modified-since
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow generation of up-to-date delta CRLs
While switching to periodic rebuilds of CRLs alleviates the constant
rebuild pressure on Vault during times of high revocation, the CRL
proper becomes stale. One response to this is to switch to OCSP, but not
every system has support for this. Additionally, OCSP usually requires
connectivity and isn't used to augment a pre-distributed CRL (and is
instead used independently).
By generating delta CRLs containing only new revocations, an existing
CRL can be supplemented with newer revocations without requiring Vault
to rebuild all complete CRLs. Admins can periodically fetch the delta
CRL and add it to the existing CRL and applications should be able to
support using serials from both.
Because delta CRLs are emptied when the next complete CRL is rebuilt, it
is important that applications fetch the delta CRL and correlate it to
their complete CRL; if their complete CRL is older than the delta CRL's
extension number, applications MUST fetch the newer complete CRL to
ensure they have a correct combination.
This modifies the revocation process and adds several new configuration
options, controlling whether Delta CRLs are enabled and when we'll
rebuild it.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on delta CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address review feedback: fix several bugs
Thanks Steve!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly invoke periodic func on active nodes
We need to ensure we read the updated config (in case of OCSP request
handling on standby nodes), but otherwise want to avoid CRL/DeltaCRL
re-building.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidy steps into two separate helpers
This refactors the tidy go routine into two separate helpers, making it
clear where the boundaries of each are: variables are passed into these
method and concerns are separated. As more operations are rolled into
tidy, we can continue adding more helpers as appropriate. Additionally,
as we move to make auto-tidy occur, we can use these as points to hook
into periodic tidying.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor revInfo checking to helper
This allows us to validate whether or not a revInfo entry contains a
presently valid issuer, from the existing mapping. Coupled with the
changeset to identify the issuer on revocation, we can begin adding
capabilities to tidy to update this association, decreasing CRL build
time and increasing the performance of OCSP.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor issuer fetching for revocation purposes
Revocation needs to gracefully handle using the old legacy cert bundle,
so fetching issuers (and parsing them) needs to be done slightly
differently than other places. Refactor this from revokeCert into a
common helper that can be used by tidy.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow tidy to associate revoked certs, issuers
When revoking a certificate, we need to associate the issuer that signed
its certificate back to the revInfo entry. Historically this was
performed during CRL building (and still remains so), but when running
without CRL building and with only OCSP, performance will degrade as the
issuer needs to be found each time.
Instead, allow the tidy operation to take over this role, allowing us to
increase the performance of OCSP and CRL in this scenario, by decoupling
issuer identification from CRL building in the ideal case.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for tidy updates
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on new tidy parameter, metrics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor tidy config into shared struct
Finish adding metrics, status messages about new tidy operation.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add ocsp_expiry configuration field to PKI crl config
- Add a new configurable duration field to the crl configuration to
allow operator control of how long an OCSP response can be cached
for.
- This is useful for how long a server like NGINX/Apache is
allowed to cache the response for OCSP stapling.
- A value of 0 means no one should cache the response.
- Address an issue discovered that we did not upgrade existing crl
configurations properly
* PR feedback
* Allow correct importing of certs without CRL KU
When Vault imports certificates without KU for CRLSign, we shouldn't
provision CRLUsage on the backing issuer; otherwise, we'll attempt to
build CRLs and Go will cause us to err out. This change makes it clear
(at issuer configuration time) that we can't possibly support this
operation and hopefully prevent users from running into the more cryptic
Go error.
Note that this does not apply for OCSP EKU: the EKU exists, per RFC 6960
Section 2.6 OCSP Signature Authority Delegation, to allow delegation of
OCSP signing to a child certificate. This EKU is not necessary on the
issuer itself, and generally assumes issuers are allowed to issue OCSP
responses regardless of KU/EKU.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs to clarify issue with import, CRL usage
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/pki.mdx
* Add additional test assertion
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* updated usage example
* Docs: updated examples with base64 - removed herestring for echo instead that's more simple.
* Docs: updated examples with base64 - removed herestring for echo instead that's more simple.
Co-authored-by: Mehdi Ahmadi <aphorise@gmail.com>
* Allow automatic rebuilding of CRLs
When enabled, periodic rebuilding of CRLs will improve PKI mounts in two
way:
1. Reduced load during periods of high (new) revocations, as the CRL
isn't rebuilt after each revocation but instead on a fixed schedule.
2. Ensuring the CRL is never stale as long as the cluster remains up,
by checking for next CRL expiry and regenerating CRLs before that
happens. This may increase cluster load when operators have large
CRLs that they'd prefer to let go stale, rather than regenerating
fresh copies.
In particular, we set a grace period before expiration of CRLs where,
when the periodic function triggers (about once a minute), we check
upcoming CRL expirations and check if we need to rebuild the CRLs.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on periodic rebuilding
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow modification of rollback period for testing
When testing backends that use the periodic func, and specifically,
testing the behavior of that periodic func, waiting for the usual 1m
interval can lead to excessively long test execution. By switching to a
shorter period--strictly for testing--we can make these tests execute
faster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for auto-rebuilding of CRLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove non-updating getConfig variant
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Avoid double reload of config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor existing CRL function to storage getRevocationConfig
* Introduce ocsp_disable config option in config/crl
* Introduce OCSPSigning usage flag on issuer
* Add ocsp-request passthrough within lower layers of Vault
* Add OCSP responder to Vault PKI
* Add API documentation for OCSP
* Add cl
* Revert PKI storage migration modifications for OCSP
* Smaller PR feedback items
- pki.mdx doc update
- parens around logical.go comment to indicate DER encoded request is
related to OCSP and not the snapshots
- Use AllIssuers instead of writing them all out
- Drop zero initialization of crl config's Disable flag if not present
- Upgrade issuer on the fly instead of an initial migration
* Additional clean up backing out the writeRevocationConfig refactoring
* Remove Dirty issuer flag and update comment about not writing upgrade to
storage
* Address PR feedback and return Unknown response when mismatching issuer
* make fmt
* PR Feedback.
* More PR feedback
- Leverage ocsp response constant
- Remove duplicate errors regarding unknown issuers
* Add per-issuer AIA URI information
Per discussion on GitHub with @maxb, this allows issuers to have their
own copy of AIA URIs. Because each issuer has its own URLs (for CA and
CRL access), its necessary to mint their issued certs pointing to the
correct issuer and not to the global default issuer. For anyone using
multiple issuers within a mount, this change allows the issuer to point
back to itself via leaf's AIA info.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on per-issuer AIA info
Also add it to the considerations page as something to watch out for.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for per-issuer AIA information
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor AIA setting on the issuer
This introduces a common helper per Steve's suggestion.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error messages w.r.t. AIA naming
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error messages regarding AIA URLs
This clarifies which request parameter the invalid URL is contained
in, disambiguating the sometimes ambiguous usage of AIA, per suggestion
by Max.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Rename getURLs -> getGlobalAIAURLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correct AIA acronym expansion word orders
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix bad comment suggesting re-generating roots
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add two entries to URL tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow marking issuers as revoked
This allows PKI's issuers to be considered revoked and appear on each
others' CRLs. We disable issuance (via removing the usage) and prohibit
modifying the usage via the regular issuer management interface.
A separate endpoint is necessary because issuers (especially if signed
by a third-party CA using incremental serial numbers) might share a
serial number (e.g., an intermediate under cross-signing might share the
same number as an external root or an unrelated intermediate).
When the next CRL rebuild happens, this issuer will then appear on
others issuers CRLs, if they validate this issuer's certificate.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on revoking issuers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for issuer revocation semantics
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Notate that CRLs will be rebuilt
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Fix timestamp field from _utc -> to _rfc3339
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure serial-based accesses shows as revoked
Thanks Kit!
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning when revoking default issuer
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* impr(ssh): fix bug with allowed_users_template and add allowed_domains_template field in SSH role configuration, closes#10943
* chore: add changelog entry
* Allow Proof of Possession based revocation
Revocation by proof of possession ensures that we have a private key
matching the (provided or stored) certificate. This allows callers to
revoke certificate they own (as proven by holding the corresponding
private key), without having an admin create innumerable ACLs around
the serial_number parameter for every issuance/user.
We base this on Go TLS stack's verification of certificate<->key
matching, but extend it where applicable to ensure curves match, the
private key is indeed valid, and has the same structure as the
corresponding public key from the certificate.
This endpoint currently is authenticated, allowing operators to disable
the endpoint if it isn't desirable to use, via ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clarify error message on ParseDERKey
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Leave revoke-with-key authenticated
After some discussion, given the potential for DoS (via submitting a lot
of keys/certs to validate, including invalid pairs), it seems best to
leave this as an authenticated endpoint. Presently in Vault, there's no
way to have an authenticated-but-unauthorized path (i.e., one which
bypasses ACL controls), so it is recommended (but not enforced) to make
this endpoint generally available by permissive ACL policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add API documentation on PoP
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add acceptance tests for Proof of Possession
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Exercise negative cases in PoP tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Refactor serial creation to common helper
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add BYOC revocation to PKI mount
This allows operators to revoke certificates via a PEM blob passed to
Vault. In particular, Vault verifies the signature on the certificate
from an existing issuer within the mount, ensuring that one indeed
issued this certificate. The certificate is then added to storage and
its serial submitted for revocation.
This allows certificates generated with no_store=true to be submitted
for revocation afterwards, given a full copy of the certificate. As a
consequence, all roles can now safely move to no_store=true (if desired
for performance) and revocation can be done on a case-by-case basis.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on BYOC revocation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add PEM length check to BYOC import
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for BYOC
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Guard against legacy CA bundle usage
This prevents usage of the BYOC cert on a hybrid 1.10/1.12 cluster with
an non-upgraded CA issuer bundle.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
