* Clarify error on due to unsupported EC key bits
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Remove documentation about unsupported EC/224
Resolves: #18843
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* The fields.
* UserID set, add to certificate
* Changelog.
* Fix test (set default).
* Add UserID constant to certutil, revert extension changes
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add user_ids as field for leaf signing
Presumably, this isn't necessary for CAs, given that CAs probably don't
have a user ID corresponding to them.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Support setting multiple user_ids in Subject
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow any User ID with sign-verbatim
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for User IDs in PKI
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs about user_ids, allowed_user_ids
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Alexander Scheel <alex.scheel@hashicorp.com>
* change indentation leve of cas field
* change formatting for cas_required
Co-authored-by: Yoko Hyakuna <yoko@hashicorp.com>
Co-authored-by: Yoko Hyakuna <yoko@hashicorp.com>
* Allow tidy to backup legacy CA bundles
With the new tidy_move_legacy_ca_bundle option, we'll use tidy to move
the legacy CA bundle from /config/ca_bundle to /config/ca_bundle.bak.
This does two things:
1. Removes ca_bundle from the hot-path of initialization after initial
migration has completed. Because this entry is seal wrapped, this
may result in performance improvements.
2. Allows recovery of this value in the event of some other failure
with migration.
Notably, this cannot occur during migration in the unlikely (and largely
unsupported) case that the operator immediately downgrades to Vault
<1.11.x. Thus, we reuse issuer_safety_buffer; while potentially long,
tidy can always be run manually with a shorter buffer (and only this
flag) to manually move the bundle if necessary.
In the event of needing to recover or undo this operation, it is
sufficient to use sys/raw to read the backed up value and subsequently
write it to its old path (/config/ca_bundle).
The new entry remains seal wrapped, but otherwise isn't used within the
code and so has better performance characteristics.
Performing a fat deletion (DELETE /root) will again remove the backup
like the old legacy bundle, preserving its wipe characteristics.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation about new tidy parameter
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests for migration scenarios
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Clean up time comparisons
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add cluster_aia_path templating variable
Per discussion with maxb, allow using a non-Vault distribution point
which may use an insecure transport for RFC 5280 compliance.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Address feedback from Max
Co-authored-by: Max Bowsher <maxbowsher@gmail.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Max Bowsher <maxbowsher@gmail.com>
* VAULT-12491 Add docs for group policy config
* VAULT-12491 typo
* VAULT-12491 typo
* VAULT-12491 Update language a bit
* VAULT-12491 Update language a bit
* VAULT-12491 Update language a bit
* Return the partial success code override for all batch error types
* changelog
* docs
* Lost the actual override logic. :)
* And don't hardcode 400
* gate on success
* Rename path_config -> path_keys_config
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add config/keys to disable upserting
Transit would allow anyone with Create permissions on the encryption
endpoint to automatically create new encryption keys. This becomes hard
to reason about for operators, especially if typos are subtly
introduced (e.g., my-key vs my_key) -- there is no way to merge these
two keys afterwards.
Add the ability to globally disable upserting, so that if the
applications using Transit do not need the capability, it can be
globally disallowed even under permissive policies.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation on disabling upsert
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Update website/content/api-docs/secret/transit.mdx
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
* Update website/content/api-docs/secret/transit.mdx
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: tjperry07 <tjperry07@users.noreply.github.com>
* Allow templating of cluster-local AIA URIs
This adds a new configuration path, /config/cluster, which retains
cluster-local configuration. By extending /config/urls and its issuer
counterpart to include an enable_templating parameter, we can allow
operators to correctly identify the particular cluster a cert was
issued on, and tie its AIA information to this (cluster, issuer) pair
dynamically.
Notably, this does not solve all usage issues around AIA URIs: the CRL
and OCSP responder remain local, meaning that some merge capability is
required prior to passing it to other systems if they use CRL files and
must validate requests with certs from any arbitrary PR cluster.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation about templated AIAs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add tests
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* AIA URIs -> AIA URLs
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* issuer.AIAURIs might be nil
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Allow non-nil response to config/urls
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Always validate URLs on config update
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Ensure URLs lack templating parameters
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Review feedback
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Per conversation on Slack with Nick.
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* New PKI API to generate and sign a CRL based on input data
- Add a new PKI API that allows an end-user to feed in all the
information required to generate and sign a CRL by a given issuer.
- This is pretty powerful API allowing an escape hatch for 3rd parties
to craft customized CRLs with extensions based on their individual
needs
* Add api-docs and error if reserved extension is provided as input
* Fix copy/paste error in Object Identifier constants
* Return nil on errors instead of partially filled slices
* Add cl
* add compatibility info to consul service reg docs
* fix alert formatting
* add consul dataplane compatibility partial
* add compat partial to more consul doc pages
* fix links
* Add crl list capabilities to cert auth
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on cert auth CRL listing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for cert auth listing
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new PKI api to combine and sign different CRLs from the same issuer
- Add a new PKI api /issuer/<issuer ref>/resign-crls that will allow
combining and signing different CRLs that were signed by the same
issuer.
- This allows external actors to combine CRLs into a single CRL across
different Vault clusters that share the CA certificate and key material
such as performance replica clusters and the primary cluster
* Update API docs
* PR Feedback - Delta CRL rename
* Update to latest version of main
* PR Feedback - Get rid of the new caEntry struct
* Address PR feedback in api-docs and PEM encoded response
- Within the table specifying the various paths to generate a CSR
in the PKI docs, the new issuers based api has a typo in it missing
the issuers/ prefix.
- Brought to our attention by Chelsea and Claire, thanks!
When renaming the header to Set Revocation Configuration, we broke
bookmarks. Add in the named anchor so the old bookmarks and links still
work.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Added documentation for Introspection API
* Edit hyperlink in index doc
* Added the path to the nav file
* Edited some mispelled words
* Fix deployment issue. Change link in nav file
* Edit the router mdx and add response values
* Edit nav doc
* Changed hyperlink, changed response to json, changed some wording
* Remove requirement that the endpoint is off by default
* Update website/content/api-docs/system/inspect/router.mdx
Co-authored-by: Josh Black <raskchanky@users.noreply.github.com>
* Update website/content/api-docs/system/inspect/router.mdx
Co-authored-by: Josh Black <raskchanky@users.noreply.github.com>
* Update website/content/api-docs/system/inspect/index.mdx
Co-authored-by: Josh Black <raskchanky@users.noreply.github.com>
Co-authored-by: Josh Black <raskchanky@users.noreply.github.com>
The current behaviour is to only add mount paths into the generated `opeanpi.json` spec if a `generic_mount_paths` flag is added to the request. This means that we would have to maintain two different `openapi.json` files, which is not ideal. The new solution in this PR is to add `{mount_path}` into every path with a default value specified:
```diff
-- "/auth/token/accessors/": {
++ "/auth/{mount_path}/accessors/": {
"parameters": [
{
"name": "mount_path",
"description": "....",
"in": "path",
"schema": {
"type": "string",
++ "default": "token"
}
}
],
```
Additionally, fixed the logic to generate the `operationId` (used to generate method names in the code generated from OpenAPI spec). It had a bug where the ID had `mountPath` in it. The new ID will look like this:
```diff
-- "operationId": "listAuthMountpathAccessors",
++ "operationId": "listTokenAccessors",
```
* clarify that init recovery options are only available for auto unseal
* add some language consistency
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
Co-authored-by: Anton Averchenkov <84287187+averche@users.noreply.github.com>
* Add automatic tidy of expired issuers
To aid PKI users like Consul, which periodically rotate intermediates,
and provided a little more consistency with older versions of Vault
which would silently (and dangerously!) replace the configured CA on
root/intermediate generation, we introduce an automatic tidy of expired
issuers.
This includes a longer safety buffer (1 year) and logging of the
relevant issuer information prior to deletion (certificate contents, key
ID, and issuer ID/name) to allow admins to recover this value if
desired, or perform further cleanup of keys.
From my PoV, removal of the issuer is thus a relatively safe operation
compared to keys (which I do not feel comfortable removing) as they can
always be re-imported if desired. Additionally, this is an opt-in tidy
operation, not enabled by default. Lastly, most major performance
penalties comes with lots of issuers within the mount, not as much
large numbers of keys (as only new issuer creation/import operations are
affected, unlike LIST /issuers which is a public, unauthenticated
endpoint).
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for tidy
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add docs on tidy of issuers
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Restructure logging
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add missing fields to expected tidy output
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Correctly preserve other issuer config params
When setting a new default issuer, our helper function would overwrite
other parameters in the issuer configuration entry. However, up until
now, there were none.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new parameter to allow default to follow new
This parameter will allow operators to have the default issuer
automatically update when a new root is generated or a single issuer
with a key (potentially with others lacking key) is imported.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Storage migration tests fail on new members
These internal members shouldn't be tested by the storage migration
code, and so should be elided from the test results.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Follow new issuer on root generation, import
This updates the two places where issuers can be created (outside of
legacy CA bundle migration which already sets the default) to follow
newly created issuers when the config is set.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog entry
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add documentation
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add test for new default-following behavior
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add new API to PKI to list revoked certificates
- A new API that will return the list of serial numbers of
revoked certificates on the local cluster.
* Add cl
* PR feedback
* Return revocation info within existing certs/<serial> api
- The api already returned both the certificate and a revocation_time
field populated. Update the api to return revocation_time_rfc3339
as we do elsewhere and also the issuer id if it was revoked.
- This will allow callers to associate a revoked cert with an issuer
* Add cl
* PR feedback (docs update)
* Docs: API secret/ssh clarity on Create & Update
Added clarity notes on required permissions (`update` & `create`) that's otherwise not obvious without experience of other mounts that have requirements for similar ACL to manage. Resolves#9888.
* Update website/content/api-docs/secret/ssh.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Update website/content/api-docs/secret/ssh.mdx
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
* Docs: API secret/ssh clarity on Create & Update...
Reduced text (-1 line) further to feedback from @benashz; retaining details on `create` vs `update` difference as per [API transit method that calls this out too.](https://www.vaultproject.io/api-docs/secret/transit#encrypt-data)
* trigger ci
Co-authored-by: Loann Le <84412881+taoism4504@users.noreply.github.com>
Co-authored-by: Yoko Hyakuna <yoko@hashicorp.com>
