* Fix clone method and add new validation for same gen
* Add safety logic for rejecting seal configuration changes
* Remove ent build req for test file
* Seal HA: Use new SealWrappedValue type to abstract seal wrapped values
Introduce SealWrappedValue to abstract seal wrapped values.
Make SealWrappedValue capable of marshalling into a BlobInfo, when there is
plaintext or a single encryption, or to a custom serialization consisting of a
header, length and a marshalled MultiWrapValue protobuf.
* Vault-13769: Support configuring and using multiple seals for unsealing
* Make sealWrapBackend start using multiple seals
* Make seal.Access no longer implement wrapping.Wrapper.
Instead, add the Encrypt and Decrypt methods to the Access interface.
* Make raft snapshot system use funcs SealWrapValue + UnsealWrapValue.
Move the snapshot.Sealer implementation to the vault package to
avoid circular imports.
* Update sealWrapBackend to use multiple seals for encryption.
Use all the encryption wrappers when storing seal wrapped values.
Try do decrypt using the highest priority wrapper, but try all
combinations of encrypted values and wrappers if necessary.
* Allow the use of multiple seals for entropy augmentation
Add seal_name variable in entropy stanza
Add new MultiSourcer to accommodate the new entropy augmentation behavior.
* Individually health check each wrapper, and add a sys/seal-backend-status endpoint.
* Address a race, and also a failed test mock that I didn't catch
* Track partial wrapping failures...
... where one or more but not all access.Encrypts fail for a given write.
Note these failures by adding a time ordered UUID storage entry containing
the path in a special subdirectory of root storage. Adds a callback
pattern to accomplish this, with certain high value writes like initial
barrier key storage not allowing a partial failure. The followup work
would be to detect return to health and iterate through these storage
entries, rewrapping.
* Add new data structure to track seal config generation (#4492)
* Add new data structure to track seal config generation
* Remove import cycle
* Fix undefined variable errors
* update comment
* Update setSeal response
* Fix setSealResponse in operator_diagnose
* Scope the wrapper health check locks individually (#4491)
* Refactor setSeal function in server.go. (#4505)
Refactor setSeal function in server.go.
* Decouple CreateSecureRandomReaderFunc from seal package.
Instead of using a list of seal.SealInfo structs, make
CreateSecureRandomReaderFunc use a list of new EntropySourcerInfo structs. This
brakes the denpency of package configutil on the seal package.
* Move SealGenerationInfo tracking to the seal Access.
* Move SealGenerationInfo tracking to the seal Access.
The SealGenerationInfo is now kept track by a Seal's Access instead of by the
Config object. The access implementation now records the correct generation
number on seal wrapped values.
* Only store and read SealGenerationInfo if VAULT_ENABLE_SEAL_HA_BETA is true.
* Add MultiWrapValue protobuf message
MultiWrapValue can be used to keep track of different encryptions of a value.
---------
Co-authored-by: Victor Rodriguez <vrizo@hashicorp.com>
* Use generation to determine if a seal wrapped value is up-to-date. (#4542)
* Add logging to seal Access implementation.
* Seal HA buf format run (#4561)
* Run buf format.
* Add buf.lock to ensure go-kms-wrapping module is imported.
* Vault-18958: Add unit tests for config checks
* Add safety logic for seal configuration changes
* Revert "Add safety logic for seal configuration changes"
This reverts commit 7fec48035a5cf274e5a4d98901716d08d766ce90.
* changes and tests for checking seal config
* add ent tests
* remove check for empty name and add type into test cases
* add error message for empty name
* fix no seals test
---------
Co-authored-by: divyapola5 <divya@hashicorp.com>
* Handle migrations between single-wrapper and multi-wrapper autoSeals
* Extract method SetPhysicalSealConfig.
* Extract function physicalSealConfig.
The extracted function is the only code now reading SealConfig entries from
storage.
* Extract function setPhysicalSealConfig.
The extracted function is the only code now writing SealConfig entries from
storage (except for migration from the old recovery config path).
* Move SealConfig to new file vault/seal_config.go.
* Add SealConfigType quasy-enumeration.
SealConfigType is to serve as the typed values for field SealConfig.Type.
* Rename Seal.RecoveryType to RecoverySealConfigType.
Make RecoverySealConfigType return a SealConfigType instead of a string.
* Rename Seal.BarrierType to BarrierSealConfigType.
Make BarrierSealConfigType return a SealConfigType.
Remove seal.SealType (really a two-step rename to SealConfigType).
* Add Seal methods ClearBarrierConfig and ClearRecoveryConfig.
* Handle autoseal <-> multiseal migrations.
While going between single-wrapper and multiple-wrapper autoseals are not
migrations that require an unwrap seal (such as going from shamir to autoseal),
the stored "barrier" SealConfig needs to be updated in these cases.
Specifically, the value of SealConfg.Type is "multiseal" for autoSeals that have
more than one wrapper; on the other hand, for autoseals with a single wrapper,
SealConfig.Type is the type of the wrapper.
* Remove error return value from NewAutoSeal constructor.
* Automatically rewrap partially seal wrapped values on an interval
* Add in rewrapping of partially wrapped values on an interval, regardless of seal health/status.
* Don't set SealGenerationInfo Rewrapped flag in the partial rewrap call.
* Unexport the SealGenerationInfo's Rewrapped field, add a mutex to it for thread safe access, and add accessor methods for it.
* Add a success callback to the manual seal rewrap process that updates the SealGenerationInfo's rewrapped field. This is done via a callback to avoid an import cycle in the SealRewrap code.
* Fix a failing seal wrap backend test which was broken by the unexporting of SealGenerationInfo's Rewrapped field.
* Nil check the seal rewrap success callback before calling it.
* Change SealGenerationInfo rewrapped parameter to an atomic.Bool rather than a sync.RWMutex for simplicity and performance.
* Add nil check for SealAccess before updating SealGenerationInfo rewrapped status during seal rewrap call.
* Update partial rewrap check interval from 10 seconds to 1 minute.
* Update a reference to SealGenerationInfo Rewrapped field to use new getter method.
* Fix up some data raciness in partial rewrapping.
* Account for possibly nil storage entry when retrieving partially wrapped value.
* Allow multi-wrapper autoSeals to include disabled seal wrappers.
* Restore propagation of wrapper configuration errors by setSeal.
Function setSeal is meant to propagate non KeyNotFound errors returned by calls
to configutil.ConfigureWrapper.
* Remove unused Access methods SetConfig and Type.
* Allow multi-wrapper autoSeals to include disabled seal wrappers.
Make it possible for an autoSeal that uses multiple wrappers to include disabled
wrappers that can be used to decrypt entries, but are skipped for encryption.
e an unwrapSeal when there are disabled seals.
* Fix bug with not providing name (#4580)
* add suffix to name defaults
* add comment
* only change name for disabled seal
* Only attempt to rewrap partial values when all seals are healthy.
* Only attempt to rewrap partial values when all seals are healthy.
* Change logging level from info to debug for notice about rewrap skipping based on seal health.
* Remove stale TODOs and commented out code.
---------
Co-authored-by: rculpepper <rculpepper@hashicorp.com>
Co-authored-by: Larroyo <95649169+DeLuci@users.noreply.github.com>
Co-authored-by: Scott G. Miller <smiller@hashicorp.com>
Co-authored-by: Divya Pola <87338962+divyapola5@users.noreply.github.com>
Co-authored-by: Matt Schultz <matt.schultz@hashicorp.com>
Co-authored-by: divyapola5 <divya@hashicorp.com>
Co-authored-by: Rachel Culpepper <84159930+rculpepper@users.noreply.github.com>
* Adding explicit MPL license for sub-package.
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Adding explicit MPL license for sub-package.
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Updating the license from MPL to Business Source License.
Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at https://hashi.co/bsl-blog, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl.
* add missing license headers
* Update copyright file headers to BUS-1.1
* Fix test that expected exact offset on hcl file
---------
Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>
Co-authored-by: Sarah Thompson <sthompson@hashicorp.com>
Co-authored-by: Brian Kassouf <bkassouf@hashicorp.com>
* Major overhaul of `vault operator generate-root` CLI help
Resolves#15252
A major overhaul of the `vault operator generate-root` CLI help to
surface the fact that it is actually six separate commands in one,
rather than requiring users to independently deduce this mental model
themselves.
In the process of doing so, also standardize some terminology:
* Fix places which used the phrase "operational token" instead of
"operation token" to be consistent with the prevailing terminology.
* Fix places which used the phrase "recovery operation token" instead of
"recovery token" to be consistent with the prevailing terminology.
This PR currently focusses on the CLI help, but following review and
feedback, I assume I'll need to replicate many of the same changes in
website/content/docs/commands/operator/generate-root.mdx as well.
* Fix some tab characters which should have been spaces
* Update command/operator_generate_root.go
---------
Co-authored-by: Violet Hynes <violet.hynes@hashicorp.com>
* Automatically track subloggers in allLoggers
This PR introduces a new interface called `SubloggerAdder` for tracking
allLoggers across startup phases.
The interface enables us to register a single `SubloggerHook` during
initial logger creation and hand off management of `allLoggers` during
the three phases we need to handle:
- Before `CoreConfig` is created, the `SubloggerHook`
(`AppendToAllLoggers`) appends new subloggers to
`ServerCommand.allLoggers`.
- After `CoreConfig` is created and before `NewCore` returns, new subloggers
are added to `CoreConfig.AllLoggers`. Intermediate state must also be
kept in sync within NewCore to track new subloggers before we return
to the server command and register the `Core.SubloggerAdder`
implementation.
- After `NewCore` returns to the server command, we register Core as the
implementer of `ServerCommand.SubloggerAdder` ensuring that all new
subloggers are appended to `Core.allLoggers`.
* Wire up the sublogger hook in NewTestLogger
* refactor code focused on DevTLS mode into new function
* add tests for configureDevTLS function
* replace testcase comments with fields in testcase struct
* core/server: add support to write pprof files to the filesystem via SIGUSR2
* changelog
* Fix filepath join
* Use core logger
* Simplify logic
* Break on error
* Move seal barrier type field from Access to autoSeal struct.
Remove method Access.SetType(), which was only being used by a single test, and
which can use the name option of NewTestSeal() to specify the type.
* Change method signatures of Access to match those of Wrapper.
* Turn seal.Access struct into an interface.
* Tweak Access implementation.
Change `access` struct to have a field of type wrapping.Wrapper, rather than
extending it.
* Add method Seal.GetShamirWrapper().
Add method Seal.GetShamirWrapper() for use by code that need to perform
Shamir-specific operations.
* Revert "Don't execute the seal recovery tests on ENT. (#18841)"
This reverts commit 990d3bacc2.
* Revert "Add the ability to unseal using recovery keys via an explicit seal option. (#18683)"
This reverts commit 2ffe49aab0.
* wip
* wip
* Got it 'working', but not happy about cleanliness yet
* Switch to a dedicated defaultSeal with recovery keys
This is simpler than trying to hijack SealAccess as before. Instead, if the operator
has requested recovery unseal mode (via a flag in the seal stanza), we new up a shamir
seal with the recovery unseal key path instead of the auto seal. Then everything proceeds
as if you had a shamir seal to begin with.
* Handle recovery rekeying
* changelog
* Revert go.mod redirect
* revert multi-blob info
* Dumb nil unmarshal target
* More comments
* Update vault/seal.go
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* Update changelog/18683.txt
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* pr feedback
* Fix recovery rekey, which needs to fetch root keys and restore them under the new recovery split
* Better comment on recovery seal during adjustSealMigration
* Make it possible to migrate from an auto-seal in recovery mode to shamir
* Fix sealMigrated to account for a recovery seal
* comments
* Update changelog/18683.txt
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* Address PR feedback
* Refactor duplicated migration code into helpers, using UnsealRecoveryKey/RecoveryKey where appropriate
* Don't shortcut the reast of seal migration
* get rid of redundant transit server cleanup
Co-authored-by: Nick Cabatoff <ncabatoff@hashicorp.com>
* integer values for some log flags
* Adjusted `log_flags` to expect `int` for max files and max bytes
* Updated `server` and `agent`
Renamed updateConfig (and updateLogConfig)
* Added int log params to test
* Adjust config/params so we can identify when they're not present
* Removed pointer confusion
* add core state lockd eadlock detection config option v2
* add changelog
* split out NewTestCluster function to maintain build flag
* replace long func with constant
* remove line
* rename file, and move where detect deadlock flag is set
* Allow mounting external plugins with same name/type as deprecated builtins
* Add some go tests for deprecation status handling
* Move timestamp storage to post-unseal
* Add upgrade-aware deprecation shutdown and tests
* add Link config, init, and capabilities
* add node status proto
* bump protoc version to 3.21.9
* make proto
* adding link tests
* remove wrapped link
* add changelog entry
* update changelog entry
Move version out of SDK. For now it's a copy rather than move: the part not addressed by this change is sdk/helper/useragent.String, which we'll want to remove in favour of PluginString. That will have to wait until we've removed uses of useragent.String from all builtins.
Create global quotas of each type in every NewTestCluster. Also switch some key locks to use DeadlockMutex to make it easier to discover deadlocks in testing.
NewTestCluster also now starts the cluster, and the Start method becomes a no-op. Unless SkipInit is provided, we also wait for a node to become active, eliminating the need for WaitForActiveNode. This was needed because otherwise we can't safely make the quota api call. We can't do it in Start because Start doesn't return an error, and I didn't want to begin storing the testing object T instead TestCluster just so we could call t.Fatal inside Start.
The last change here was to address the problem of how to skip setting up quotas when creating a cluster with a nonstandard handler that might not even implement the quotas endpoint. The challenge is that because we were taking a func pointer to generate the real handler func, we didn't have any way to compare that func pointer to the standard handler-generating func http.Handler without creating a circular dependency between packages vault and http. The solution was to pass a method instead of an anonymous func pointer so that we can do reflection on it.
* Work to unify log-file for agent/server and add rotation
* Updates to rotation code, tried to centralise the log config setup
* logging + tests
* Move LogFile to ShareConfig in test
* Docs
This fixes a couple of references to loop variables in parallel tests
and deferred functions. When running a parallel test (calling
`t.Parallel()`) combined with the table-driven pattern, it's necessary
to copy the test case loop variable, otherwise only the last test case
is exercised. This is documented in the `testing` package:
https://pkg.go.dev/testing#hdr-Subtests_and_Sub_benchmarks
`defer` statements that invoke a closure should also not reference a
loop variable directly as the referenced value will change in each
iteration of the loop.
Issues were automatically found with the `loopvarcapture` linter.
* HCP link integration
* update configure-git.yml
* more OSS stuff
* removing internal repos
* adding a nil check
* removing config test to be included in ENT only
* updating hcp-sdk-go to v0.22.0
* remove Hostname and AuthURL link config params
Co-authored-by: Chris Capurso <1036769+ccapurso@users.noreply.github.com>
* OSS portion of wrapper-v2
* Prefetch barrier type to avoid encountering an error in the simple BarrierType() getter
* Rename the OveriddenType to WrapperType and use it for the barrier type prefetch
* Fix unit test
* add func to set level for specific logger
* add endpoints to modify log level
* initialize base logger with IndependentLevels
* test to ensure other loggers remain unchanged
* add DELETE loggers endpoints to revert back to config
* add API docs page
* add changelog entry
* remove extraneous line
* add log level field to Core struct
* add godoc for getLogLevel
* add some loggers to c.allLoggers
This was causing failures when running `vault server -dev`:
> panic: runtime error: invalid memory address or nil pointer dereference
> [signal SIGSEGV: segmentation violation code=0x2 addr=0x20 pc=0x105c41c1c]
>
> goroutine 1 [running]:
> github.com/hashicorp/vault/command.(*ServerCommand).parseConfig(0x140005a2180)
> .../vault/command/server.go:429 +0x5c
Interestingly, we do not have a test case for running the dev
sever.
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add warning about EA in FIPS mode
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
* Add changelog
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
