Amazon Linux 2 uses an ancient version of Systemd/systemctl so instead
of using -P when determining the unit file we use the less convenient
-p.
Signed-off-by: Ryan Cragun <me@ryan.ec>
When verifying the Vault version, in addition to verifying the CLI
version we also check that the `/sys/version-history` contains the
expected version.
As part of this we also fix a bug where when doing an in-place upgrade
with a Debian or Redhat package we also remove the self-managed
`vault.service` systemd unit to ensure that correctly start up using the
new version of Vault.
Signed-off-by: Ryan Cragun <me@ryan.ec>
* VAULT-28146: Add IPV6 support to enos scenarios
Add support for testing all raft storage scenarios and variants when
running Vault with IPV6 networking. We retain our previous support for
IPV4 and create a new variant `ip_version` which can be used to
configure the IP version that we wish to test with.
It's important to note that the VPC in IPV6 mode is technically mixed
and that target machines still associate public IPV6 addresses. That
allows us to execute our resources against them from IPV4 networks like
developer machines and CI runners. Despite that, we've taken care to
ensure that only IPV6 addresses are used in IPV6 mode.
Because we previously had assumed the IP Version, Vault address, and
listener ports in so many places, this PR is essentially a rewrite and
removal of those assumptions. There are also a few places where
improvements to scenarios have been included as I encountered them while
working on the IPV6 changes.
Signed-off-by: Ryan Cragun <me@ryan.ec>
In preperation for arm64 builds of hsm, fips1402, and hsm.fips1402
editions of Vault Enterprise we'll allow them in our test scenarios.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Fix the upgrade scenario by utilizing the correct Vault install location
for the initial install and by using different initial upgrade versions.
Before we had upgrade versions that were only available for Enterprise
which would fail on CE.
Signed-off-by: Ryan Cragun <me@ryan.ec>
In order to take advantage of enos' ability to outline scenarios and to
inventory what verification they perform we needed to retrofit all of
that information to our existing scenarios and steps.
This change introduces an initial set of descriptions and verification
declarations that we can continue to refine over time.
As doing this required that I re-read every scenanario in its entirety I
also updated and fixed a few things along the way that I noticed,
including adding a few small features to enos that we utilize to make
handling initial versions programtic between versions instead of having a
delta between our globals in each branch.
* Update autopilot and in-place upgrade initial versions
* Programatically determine which initial versions to use based on Vault
version
* Partially normalize steps between scenarios to make comparisons easier
* Update the MOTD to explain that VAULT_ADDR and VAULT_TOKEN have been
set
* Add scenario and step descriptions to scenarios
* Add initial scenario quality verification declarations to scenarios
* Unpin Terraform in scenarios as >= 1.8.4 should work fine
* [VAULT-27917] fix(enos): handle SLES guestregister.service unreliability
The SLES provided `guestregister.service` systemd unit is unreliable
enough that it will fail ~ 1/9 times when provisioning SLES instances.
When this happens the machine will never successfully exec SUSEConnect
to enroll and we'll get no access to the SLES repositories and
subsequently break our scenarios.
I resolved this by restructuring our `install_packages` module to to
separate repository synchronization, repository addition, and package
installation into different scripts and resources and by adding special
case handling for SLES and the `guestregister.service`.
I also make a distinction between `dnf` and `yum` because while they are
sort of the same thing on RHEL, it is not the case with Amazon2. I also
shimmed out the rest of the support for Apt in case we ever need to add
repos there.
* Revert "Temporarily remove SLES from samples (#27378)"
This reverts commit 490cdd90661a57cf849c7d64aec545e87fb393c8.
Signed-off-by: Ryan Cragun <me@ryan.ec>
* Better handle symlinks in artifact paths.
* Fix a race condition in the local builder where Terraform wouldn't
wait for local builds to finish before attempting to install vault on
target nodes.
* Make building the web ui configurable in the dev scenario.
* Rename `vault_artifactory_artifact` to `build_artifactory_artifact` to
better align with existing "build" modules.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Handle cases where `vault_cluster` is used more than once on a host.
This includes cases where we aren't initing.
Signed-off-by: Ryan Cragun <me@ryan.ec>
* [VAULT-26888] Create developer scenarios
Create developer scenarios that have simplified inputs designed for
provisioning clusters and limited verification.
* Migrate Artifactory installation module from support team focused
scenarios to the vault repository.
* Migrate support focused scenarios to the repo and update them to use
the latest in-repo modules.
* Fully document and comment scenarios to help users outline, configure,
and use the scenarios.
* Remove outdated references to the private registry that is not needed.
* Automatically configure the login shell profile to include the path to
the vault binary and the VAULT_ADDR/VAULT_TOKEN environment variables.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Add `config_mode` variant to some scenarios so we can dynamically change
how we primarily configure the Vault cluster, either by a configuration
file or with environment variables.
As part of this change we also:
* Start consuming the Enos terraform provider from public Terraform
registry.
* Remove the old `seal_ha_beta` variant as it is no longer required.
* Add a module that performs a `vault operator step-down` so that we can
force leader elections in scenarios.
* Wire up an operator step-down into some scenarios to test both the old
and new multiseal code paths during leader elections.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Context
-------
Building and testing Vault artifacts on pull requests and merges is
responsible for about 1/3rd of our overall spend on Vault CI. Of the
artifacts that we ship as part of a release, we do Enos testing scenarios
on the `linux/amd64` and `linux/arm64` binaries and their derivative
artifacts. The extended build artifacts for non-Linux platforms or less
common machine architectures are not tested at this time. They are built,
notarized, and signed as part of every pull request update and merge. As
we don't actually test these artifacts, the only gain we get from this
rather expensive behavior is that we wont merge a change that would prevent
Vault from building on one of the extended targets. Extended platform or
architecture changes are quite rare, so performing this work as frequently
as we do is costly in both monetary and developer time for little relative
safety benefit.
Goals
-----
Rethink and implement how and when we build binaries and artifacts of Vault
so that we can spend less money on repetitive work and while also reducing
the time it takes for the build and test pipelines to complete.
Solution
--------
Instead of building all release artifacts on every push, we'll opt to build
only our testable (core) artifacts. With this change we are introducing a
bit of risk. We could merge a change that breaks an extended platform and
only find out after the fact when we trigger a complete build for a release.
We'll hedge against that risk by building all of the release targets on a
scheduled cadence to ensure that they are still buildable.
We'll make building all of the targets optional on any pull request by
use of a `build/all` label on the pull request.
Further considerations
----------------------
* We want to reduce the total number of workflows and runners for all of our
pipelines if possible. As each workflow runner has infrastructure cost and
runner time penalties, using a single runner over many is often preferred.
* Many of our jobs runners have been optimized for cost and performance. We
should simplify the choices of which runners to use.
* CRT requires us to use the same build workflow in both CE and Ent.
Historically that meant that modifying `build.yml` in CE would result in a
merge conflict with `build.yml` in Ent, and break our merge workflows.
* Workflow flow control in both `build.yml` and `ci.yml` can be quite
complicated, as each needs to maintain compatibility whether executed as CE
or Ent, and when triggered with various Github events like pull_request,
push, and workflow_call, each with their own requirements.
* Many jobs utilize similar patterns of flow control and metadata but are not
reusable.
* Workflow call depth has a maximum of four, so we need to be quite
considerate when calling other workflows.
* Called workflows can only have 10 inputs.
Implementation
--------------
* Refactor the `build.yml` workflow to be agnostic to whether or not it is
executing in CE or Ent. That makes future updates to the build much easier
as we won't have to worry about merge conflicts when the change is merged
downstream.
* Extract common steps in workflows into composite actions that we can reuse.
* Fix bugs where some but not all workflows would use different Git
references when building and testing a pull request.
* We rewrite the application, docs, and UI change helpers as a composite
action. This allows us to re-use this logic to make consistent behavior
choices across build and CI.
* We combine several `build.yml` and `ci.yml` jobs into our final job.
This reduces the number of workflows required for the same behavior while
saving time overall.
* Update most of our action pins.
Results
-------
| Metric | Before | After | Diff |
|-------------------|----------|---------|-------|
| Duration: | ~14-18m | ~15-18m | ~ = |
| Workflows: | 43 | 18 | - 58% |
| Billable time: | ~1h15m | 16m | - 79% |
| Saved artifacts: | 34 | 12 | - 65% |
Infra costs should map closely to billable time.
Network I/O costs should map closely to the workflow count.
Storage costs should map directly with saved artifacts.
We could probably get parity with duration by getting more clever with
our UBI container build, as that's where we're seeing the increase. I'm
not yet concerned as it takes roughly the same time for this job to
complete as it did before.
While the CI workflow was not the focus on the PR, some shared
refactoring does show some marginal improvements there.
| Metric | Before | After | Diff |
|-------------------|----------|----------|--------|
| Duration: | ~24m | ~12.75m | - 15% |
| Workflows: | 55 | 47 | - 8% |
| Billable time: | ~4h20m | ~3h36m | - 7% |
Further focus on streamlining the CI workflows would likely result in a
few more marginal improvements, but nothing on the order like we've seen
with the build workflow.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Add support for testing `+ent.hsm` and `+ent.hsm.fips1402` Vault editions
with `pkcs11` seal types utilizing a shared `softhsm` token. Softhsm2 is
a software HSM that will load seal keys from a local disk via pkcs11.
The pkcs11 seal implementation is fairly complex as we have to create a
one or more shared tokens with various keys and distribute them to all
nodes in the cluster before starting Vault. We also have to ensure that
each sets labels are unique.
We also make a few quality of life updates by utilizing globals for
variants that don't often change and update base versions for various
scenarios.
* Add `seal_pkcs11` module for creating a `pkcs11` seal key using
`softhsm2` as our backing implementation.
* Require the latest enos provider to gain access to the `enos_user`
resource to ensure correct ownership and permissions of the
`softhsm2` data directory and files.
* Add `pkcs11` seal to all scenarios that support configuring a seal
type.
* Extract system package installation out of the `vault_cluster` module
and into its own `install_package` module that we can reuse.
* Fix a bug when using the local builder variant that mangled the path.
This likely slipped in during the migration to auto-version bumping.
* Fix an issue where restarting Vault nodes with a socket seal would
fail because a seal socket sync wasn't available on all nodes. Now we
start the socket listener on all nodes to ensure any node can become
primary and "audit" to the socket listner.
* Remove unused attributes from some verify modules.
* Go back to using cheaper AWS regions.
* Use globals for variants.
* Update initial vault version for `upgrade` and `autopilot` scenarios.
* Update the consul versions for all scenarios that support a consul
storage backend.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Test HA seal migration in the `seal_ha` by removing the primary seal,
ensuring seal rewrap has completed, and verifying that data written
through the primary seal is available in the new primary seal.
We also add a verification for the seal type at various stages of the scenario.
* Allow configuring the seal alias and priority in the `start_vault`
module.
* Add seal migration to `seal_ha` scenario.
* Verify the data written through the original primary seal after the
seal migration.
* [QT-629] Verify the seal type at various stages in `seal_ha`.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Add support for testing Vault Enterprise with HA seal support by adding
a new `seal_ha` scenario that configures more than one seal type for a
Vault cluster. We also extend existing scenarios to support testing
with or without the Seal HA code path enabled.
* Extract starting vault into a separate enos module to allow for better
handling of complex clusters that need to be started more than once.
* Extract seal key creation into a separate module and provide it to
target modules. This allows us to create more than one seal key and
associate it with instances. This also allows us to forego creating
keys when using shamir seals.
* [QT-615] Add support for configuring more that one seal type to
`vault_cluster` module.
* [QT-616] Add `seal_ha` scenario
* [QT-625] Add `seal_ha_beta` variant to existing scenarios to test with
both code paths.
* Unpin action-setup-terraform
* Add `kms:TagResource` to service user IAM profile
Signed-off-by: Ryan Cragun <me@ryan.ec>
Sometimes destroying resources in AWS will fail because of unexpected
dependency violations or other such nonsense. When this happens the
behavior of Vault that we wanted to verify has already been successfully
accomplished, however the required workflow will fail. This change
allows us to succeed if `enos scenario launch` completes but allows
`enos scenario destroy` to fail. We still notify our slack channel on
destroy failures so that we can investigate issues, however it won't
require a PR author to retry.
* Execute `enos scenario launch` instead of `enos scenario run` to allow
for very occasional issues when tearing down test infrastructure.
* Improve an error message when getting secondary cluster IP addresses.
* Don't race to get secondary cluster IP addresses.
* Add secondary token to replication scenario outputs.
Signed-off-by: Ryan Cragun <me@ryan.ec>
* Remove old initial versions from the upgrade scenario as they're
unreliable.
* Ensure that shellcheck is available on runners for linting job.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Update our `proxy` and `agent` scenarios to support new variants and
perform baseline verification and their scenario specific verification.
We integrate these updated scenarios into the pipeline by adding them
to artifact samples.
We've also improved the reliability of the `autopilot` and `replication`
scenarios by refactoring our IP address gathering. Previously, we'd ask
vault for the primary IP address and use some Terraform logic to determine
followers. The leader IP address gathering script was also implicitly
responsible for ensuring that a found leader was within a given group of
hosts, and thus waiting for a given cluster to have a leader, and also for
doing some arithmetic and outputting `replication` specific output data.
We've broken these responsibilities into individual modules, improved their
error messages, and fixed various races and bugs, including:
* Fix a race between creating the file audit device and installing and starting
vault in the `replication` scenario.
* Fix how we determine our leader and follower IP addresses. We now query
vault instead of a prior implementation that inferred the followers and sometimes
did not allow all nodes to be an expected leader.
* Fix a bug where we'd always always fail on the first wrong condition
in the `vault_verify_performance_replication` module.
We also performed some maintenance tasks on Enos scenarios byupdating our
references from `oss` to `ce` to handle the naming and license changes. We
also enabled `shellcheck` linting for enos module scripts.
* Rename `oss` to `ce` for license and naming changes.
* Convert template enos scripts to scripts that take environment
variables.
* Add `shellcheck` linting for enos module scripts.
* Add additional `backend` and `seal` support to `proxy` and `agent`
scenarios.
* Update scenarios to include all baseline verification.
* Add `proxy` and `agent` scenarios to artifact samples.
* Remove IP address verification from the `vault_get_cluster_ips`
modules and implement a new `vault_wait_for_leader` module.
* Determine follower IP addresses by querying vault in the
`vault_get_cluster_ips` module.
* Move replication specific behavior out of the `vault_get_cluster_ips`
module and into it's own `replication_data` module.
* Extend initial version support for the `upgrade` and `autopilot`
scenarios.
We also discovered an issue with undo_logs that has been described in
the VAULT-20259. As such, we've disabled the undo_logs check until
it has been fixed.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Rather than assuming a short sleep will work, we instead wait until netcat is listening of the socket. We've also configured the netcat listener to persist after the first connection, which allows Vault and us to check the connection without the process closing.
As we implemented this we also ran into AWS issues in us-east-1 and us-west-2, so we've changed our deploy regions until those issues are resolved.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Fix an issue where netcat would not be installed correctly with certain
package managers. We also fix an issue where SSH cannot exit because nc
is waitaing for SIGHUP, resulting in scenarios running forever.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Replace our prior implementation of Enos test groups with the new Enos
sampling feature. With this feature we're able to describe which
scenarios and variant combinations are valid for a given artifact and
allow enos to create a valid sample field (a matrix of all compatible
scenarios) and take an observation (select some to run) for us. This
ensures that every valid scenario and variant combination will
now be a candidate for testing in the pipeline. See QT-504[0] for further
details on the Enos sampling capabilities.
Our prior implementation only tested the amd64 and arm64 zip artifacts,
as well as the Docker container. We now include the following new artifacts
in the test matrix:
* CE Amd64 Debian package
* CE Amd64 RPM package
* CE Arm64 Debian package
* CE Arm64 RPM package
Each artifact includes a sample definition for both pre-merge/post-merge
(build) and release testing.
Changes:
* Remove the hand crafted `enos-run-matrices` ci matrix targets and replace
them with per-artifact samples.
* Use enos sampling to generate different sample groups on all pull
requests.
* Update the enos scenario matrices to handle HSM and FIPS packages.
* Simplify enos scenarios by using shared globals instead of
cargo-culted locals.
Note: This will require coordination with vault-enterprise to ensure a
smooth migration to the new system. Integrating new scenarios or
modifying existing scenarios/variants should be much smoother after this
initial migration.
[0] https://github.com/hashicorp/enos/pull/102
Signed-off-by: Ryan Cragun <me@ryan.ec>
* adding new version bump refactoring
* address comments
* remove changes used for testing
* add the version bump event!
* fix local enos scenarios
* remove unnecessary local get_local_metadata steps from scenarios
* add version base, pre, and meta to the get_local_metadata module
* use the get_local_metadata module in the local builder for version
metadata
* update the version verifier to always require a build date
Signed-off-by: Ryan Cragun <me@ryan.ec>
* Update to embed the base version from the VERSION file directly into version.go.
This ensures that any go tests can use the same (valid) version as CI and so can local builds and local enos runs.
We still want to be able to set a default metadata value in version_base.go as this is not something that we set in the VERSION file - we pass this in as an ldflag in CI (matters more for ENT but we want to keep these files in sync across repos).
* update comment
* fixing bad merge
* removing actions-go-build as it won't work with the latest go caching changes
* fix logic for getting version in enos-lint.yml
* fix version number
* removing unneeded module
---------
Signed-off-by: Ryan Cragun <me@ryan.ec>
Co-authored-by: Claire <claire@hashicorp.com>
Co-authored-by: Ryan Cragun <me@ryan.ec>
* Adding explicit MPL license for sub-package.
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Adding explicit MPL license for sub-package.
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Updating the license from MPL to Business Source License.
Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at https://hashi.co/bsl-blog, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl.
* add missing license headers
* Update copyright file headers to BUS-1.1
* Fix test that expected exact offset on hcl file
---------
Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>
Co-authored-by: Sarah Thompson <sthompson@hashicorp.com>
Co-authored-by: Brian Kassouf <bkassouf@hashicorp.com>
* Sync missing scenarios and modules
* Clean up variables and examples vars
* Add a `lint` make target for enos
* Update enos `fmt` workflow to run the `lint` target.
* Always use ipv4 addresses in target security groups.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Add an updated `target_ec2_instances` module that is capable of
dynamically splitting target instances over subnet/az's that are
compatible with the AMI architecture and the associated instance type
for the architecture. Use the `target_ec2_instances` module where
necessary. Ensure that `raft` storage scenarios don't provision
unnecessary infrastructure with a new `target_ec2_shim` module.
After a lot of trial, the state of Ec2 spot instance capacity, their
associated APIs, and current support for different fleet types in AWS
Terraform provider, have proven to make using spot instances for
scenario targets too unreliable.
The current state of each method:
* `target_ec2_fleet`: unusable due to the fact that the `instant` type
does not guarantee fulfillment of either `spot` or `on-demand`
instance request types. The module does support both `on-demand` and
`spot` request types and is capable of bidding across a maximum of
four availability zones, which makes it an attractive choice if the
`instant` type would always fulfill requests. Perhaps a `request` type
with `wait_for_fulfillment` option like `aws_spot_fleet_request` would
make it more viable for future consideration.
* `target_ec2_spot_fleet`: more reliable if bidding for target instances
that have capacity in the chosen zone. Issues in the AWS provider
prevent us from bidding across multiple zones succesfully. Over the
last 2-3 months target capacity for the instance types we'd prefer to
use has dropped dramatically and the price is near-or-at on-demand.
The volatility for nearly no cost savings means we should put this
option on the shelf for now.
* `target_ec2_instances`: the most reliable method we've got. It is now
capable of automatically determing which subnets and availability
zones to provision targets in and has been updated to be usable for
both Vault and Consul targets. By default we use the cheapest medium
instance types that we've found are reliable to test vault.
* Update .gitignore
* enos/modules/create_vpc: create a subnet for every availability zone
* enos/modules/target_ec2_fleet: bid across the maximum of four
availability zones for targets
* enos/modules/target_ec2_spot_fleet: attempt to make the spot fleet bid
across more availability zones for targets
* enos/modules/target_ec2_instances: create module to use
ec2:RunInstances for scenario targets
* enos/modules/target_ec2_shim: create shim module to satisfy the
target module interface
* enos/scenarios: use target_ec2_shim for backend targets on raft
storage scenarios
* enos/modules/az_finder: remove unsed module
Signed-off-by: Ryan Cragun <me@ryan.ec>
We seem to hit occasional capacity issues when attempting to launch spot
fleets with arm64 instance types. After checking pricing in the regions
that we use, it appears that current and older generation amd64 t2 and
t3 instance types are running at quite a discount whereas t4 arm64
instances are barely under on-demand price, suggesting limited capacity
for arm64 spot instances at this time. We'll change our default backend
instance architecture to amd64 to bid for the cheaper t2 and t3
instances and increase our `max_price` globally to that of a RHEL
machine running on-demand with a t3.medium.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Begin the process of migrating away from the "strongly encouraged not to
use"[0] Ec2 spot fleet API to the more modern `ec2:CreateFleet`.
Unfortuantely the `instant` type fleet does not guarantee fulfillment
with either on-demand or spot types. We'll need to add a feature similar
to `wait_for_fulfillment` on the `spot_fleet_request` resource[1] to
`ec2_fleet` before we can rely on it.
We also update the existing target fleets to support provisioning generic
targets. This has allowed us to remove our usage of `terraform-enos-aws-consul`
and replace it with a smaller `backend_consul` module in-repo.
We also remove `terraform-enos-aws-infra` and replace it with two smaller
in-repo modules `ec2_info` and `create_vpc`. This has allowed us to simplify
the vpc resources we use for each scneario, which in turn allows us to
not rely on flaky resources.
As part of this refactor we've also made it possible to provision
targets using different distro versions.
[0] https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-best-practices.html#which-spot-request-method-to-use
[1] https://registry.terraform.io/providers/hashicorp/aws/latest/docs/resources/spot_fleet_request#wait_for_fulfillment
* enos/consul: add `backend_consul` module that accepts target hosts.
* enos/target_ec2_spot_fleet: add support for consul networking.
* enos/target_ec2_spot_fleet: add support for customizing cluster tag
key.
* enos/scenarios: create `target_ec2_fleet` which uses a more modern
`ec2_fleet` API.
* enos/create_vpc: replace `terraform-enos-aws-infra` with smaller and
simplified version. Flatten the networking to a single route on the
default route table and a single subnet.
* enos/ec2_info: add a new module to give us useful ec2 information
including AMI id's for various arch/distro/version combinations.
* enos/ci: update service user role to allow for managing ec2 fleets.
Signed-off-by: Ryan Cragun <me@ryan.ec>
We seen instances where we try to schedule a spot fleet in the
us-east-1d of the vault CI AWS account and cannot get capacity for our
instance type. That zone currently supports far fewer instance types so
we'll bump our max bid to handle cases where slightly more expensive
instances are available. Most of the time we'll be using much cheaper
instances but it's better to pay a fraction of a cent more than have to
retry the pipeline. As such, we increase our max bid price to something
that will almost certainly be fullfilled.
We also allow our package installer to go ahead when cloud init does not
update sources like we expect. This should handle occasional failures
where cloud-init doesn't update the sources within a reasonable amount
of time.
Signed-off-by: Ryan Cragun <me@ryan.ec>
Use the latest version of enos-provider and upstream consul module.
These changes allow us to configure the vault log level in configuration
and also support configuring consul with an enterprise license.
Signed-off-by: Ryan Cragun <me@ryan.ec>
