mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-10-31 16:31:25 +01:00
8097cba809
This patch adds the device tree binding doc for the cadence qspi controller & also removes the not needed properties from the stv0991 device tree. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
29 lines
1.1 KiB
Plaintext
29 lines
1.1 KiB
Plaintext
Cadence QSPI controller device tree bindings
|
|
--------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible : should be "cadence,qspi".
|
|
- reg : 1.Physical base address and size of SPI registers map.
|
|
2. Physical base address & size of NOR Flash.
|
|
- clocks : Clock phandles (see clock bindings for details).
|
|
- sram-size : spi controller sram size.
|
|
- status : enable in requried dts.
|
|
|
|
connected flash properties
|
|
--------------------------
|
|
|
|
- spi-max-frequency : Max supported spi frequency.
|
|
- page-size : Flash page size.
|
|
- block-size : Flash memory block size.
|
|
- tshsl-ns : Added delay in master reference clocks (ref_clk) for
|
|
the length that the master mode chip select outputs
|
|
are de-asserted between transactions.
|
|
- tsd2d-ns : Delay in master reference clocks (ref_clk) between one
|
|
chip select being de-activated and the activation of
|
|
another.
|
|
- tchsh-ns : Delay in master reference clocks between last bit of
|
|
current transaction and de-asserting the device chip
|
|
select (n_ss_out).
|
|
- tslch-ns : Delay in master reference clocks between setting
|
|
n_ss_out low and first bit transfer
|