mirror of
				https://source.denx.de/u-boot/u-boot.git
				synced 2025-10-31 08:21:36 +01:00 
			
		
		
		
	Adjust this to take a device as a parameter instead of a node. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
		
			
				
	
	
		
			358 lines
		
	
	
		
			9.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			358 lines
		
	
	
		
			9.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Copyright (c) 2010-2013 NVIDIA Corporation
 | |
|  * With help from the mpc8xxx SPI driver
 | |
|  * With more help from omap3_spi SPI driver
 | |
|  *
 | |
|  * SPDX-License-Identifier:	GPL-2.0+
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <dm.h>
 | |
| #include <errno.h>
 | |
| #include <asm/io.h>
 | |
| #include <asm/gpio.h>
 | |
| #include <asm/arch/clock.h>
 | |
| #include <asm/arch/pinmux.h>
 | |
| #include <asm/arch-tegra/clk_rst.h>
 | |
| #include <spi.h>
 | |
| #include <fdtdec.h>
 | |
| #include "tegra_spi.h"
 | |
| 
 | |
| DECLARE_GLOBAL_DATA_PTR;
 | |
| 
 | |
| #define SPI_CMD_GO			BIT(30)
 | |
| #define SPI_CMD_ACTIVE_SCLK_SHIFT	26
 | |
| #define SPI_CMD_ACTIVE_SCLK_MASK	(3 << SPI_CMD_ACTIVE_SCLK_SHIFT)
 | |
| #define SPI_CMD_CK_SDA			BIT(21)
 | |
| #define SPI_CMD_ACTIVE_SDA_SHIFT	18
 | |
| #define SPI_CMD_ACTIVE_SDA_MASK		(3 << SPI_CMD_ACTIVE_SDA_SHIFT)
 | |
| #define SPI_CMD_CS_POL			BIT(16)
 | |
| #define SPI_CMD_TXEN			BIT(15)
 | |
| #define SPI_CMD_RXEN			BIT(14)
 | |
| #define SPI_CMD_CS_VAL			BIT(13)
 | |
| #define SPI_CMD_CS_SOFT			BIT(12)
 | |
| #define SPI_CMD_CS_DELAY		BIT(9)
 | |
| #define SPI_CMD_CS3_EN			BIT(8)
 | |
| #define SPI_CMD_CS2_EN			BIT(7)
 | |
| #define SPI_CMD_CS1_EN			BIT(6)
 | |
| #define SPI_CMD_CS0_EN			BIT(5)
 | |
| #define SPI_CMD_BIT_LENGTH		BIT(4)
 | |
| #define SPI_CMD_BIT_LENGTH_MASK		GENMASK(4, 0)
 | |
| 
 | |
| #define SPI_STAT_BSY			BIT(31)
 | |
| #define SPI_STAT_RDY			BIT(30)
 | |
| #define SPI_STAT_RXF_FLUSH		BIT(29)
 | |
| #define SPI_STAT_TXF_FLUSH		BIT(28)
 | |
| #define SPI_STAT_RXF_UNR		BIT(27)
 | |
| #define SPI_STAT_TXF_OVF		BIT(26)
 | |
| #define SPI_STAT_RXF_EMPTY		BIT(25)
 | |
| #define SPI_STAT_RXF_FULL		BIT(24)
 | |
| #define SPI_STAT_TXF_EMPTY		BIT(23)
 | |
| #define SPI_STAT_TXF_FULL		BIT(22)
 | |
| #define SPI_STAT_SEL_TXRX_N		BIT(16)
 | |
| #define SPI_STAT_CUR_BLKCNT		BIT(15)
 | |
| 
 | |
| #define SPI_TIMEOUT		1000
 | |
| #define TEGRA_SPI_MAX_FREQ	52000000
 | |
| 
 | |
| struct spi_regs {
 | |
| 	u32 command;	/* SPI_COMMAND_0 register  */
 | |
| 	u32 status;	/* SPI_STATUS_0 register */
 | |
| 	u32 rx_cmp;	/* SPI_RX_CMP_0 register  */
 | |
| 	u32 dma_ctl;	/* SPI_DMA_CTL_0 register */
 | |
| 	u32 tx_fifo;	/* SPI_TX_FIFO_0 register */
 | |
| 	u32 rsvd[3];	/* offsets 0x14 to 0x1F reserved */
 | |
| 	u32 rx_fifo;	/* SPI_RX_FIFO_0 register */
 | |
| };
 | |
| 
 | |
| struct tegra20_sflash_priv {
 | |
| 	struct spi_regs *regs;
 | |
| 	unsigned int freq;
 | |
| 	unsigned int mode;
 | |
| 	int periph_id;
 | |
| 	int valid;
 | |
| 	int last_transaction_us;
 | |
| };
 | |
| 
 | |
| int tegra20_sflash_cs_info(struct udevice *bus, unsigned int cs,
 | |
| 			   struct spi_cs_info *info)
 | |
| {
 | |
| 	/* Tegra20 SPI-Flash - only 1 device ('bus/cs') */
 | |
| 	if (cs != 0)
 | |
| 		return -ENODEV;
 | |
| 	else
 | |
| 		return 0;
 | |
| }
 | |
| 
 | |
| static int tegra20_sflash_ofdata_to_platdata(struct udevice *bus)
 | |
| {
 | |
| 	struct tegra_spi_platdata *plat = bus->platdata;
 | |
| 	const void *blob = gd->fdt_blob;
 | |
| 	int node = dev_of_offset(bus);
 | |
| 
 | |
| 	plat->base = devfdt_get_addr(bus);
 | |
| 	plat->periph_id = clock_decode_periph_id(bus);
 | |
| 
 | |
| 	if (plat->periph_id == PERIPH_ID_NONE) {
 | |
| 		debug("%s: could not decode periph id %d\n", __func__,
 | |
| 		      plat->periph_id);
 | |
| 		return -FDT_ERR_NOTFOUND;
 | |
| 	}
 | |
| 
 | |
| 	/* Use 500KHz as a suitable default */
 | |
| 	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
 | |
| 					500000);
 | |
| 	plat->deactivate_delay_us = fdtdec_get_int(blob, node,
 | |
| 					"spi-deactivate-delay", 0);
 | |
| 	debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
 | |
| 	      __func__, plat->base, plat->periph_id, plat->frequency,
 | |
| 	      plat->deactivate_delay_us);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tegra20_sflash_probe(struct udevice *bus)
 | |
| {
 | |
| 	struct tegra_spi_platdata *plat = dev_get_platdata(bus);
 | |
| 	struct tegra20_sflash_priv *priv = dev_get_priv(bus);
 | |
| 
 | |
| 	priv->regs = (struct spi_regs *)plat->base;
 | |
| 
 | |
| 	priv->last_transaction_us = timer_get_us();
 | |
| 	priv->freq = plat->frequency;
 | |
| 	priv->periph_id = plat->periph_id;
 | |
| 
 | |
| 	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
 | |
| 	clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
 | |
| 			       priv->freq);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tegra20_sflash_claim_bus(struct udevice *dev)
 | |
| {
 | |
| 	struct udevice *bus = dev->parent;
 | |
| 	struct tegra20_sflash_priv *priv = dev_get_priv(bus);
 | |
| 	struct spi_regs *regs = priv->regs;
 | |
| 	u32 reg;
 | |
| 
 | |
| 	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
 | |
| 	clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
 | |
| 			       priv->freq);
 | |
| 
 | |
| 	/* Clear stale status here */
 | |
| 	reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \
 | |
| 		SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF;
 | |
| 	writel(reg, ®s->status);
 | |
| 	debug("%s: STATUS = %08x\n", __func__, readl(®s->status));
 | |
| 
 | |
| 	/*
 | |
| 	 * Use sw-controlled CS, so we can clock in data after ReadID, etc.
 | |
| 	 */
 | |
| 	reg = (priv->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT;
 | |
| 	if (priv->mode & 2)
 | |
| 		reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT;
 | |
| 	clrsetbits_le32(®s->command, SPI_CMD_ACTIVE_SCLK_MASK |
 | |
| 		SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg);
 | |
| 	debug("%s: COMMAND = %08x\n", __func__, readl(®s->command));
 | |
| 
 | |
| 	/*
 | |
| 	 * SPI pins on Tegra20 are muxed - change pinmux later due to UART
 | |
| 	 * issue.
 | |
| 	 */
 | |
| 	pinmux_set_func(PMUX_PINGRP_GMD, PMUX_FUNC_SFLASH);
 | |
| 	pinmux_tristate_disable(PMUX_PINGRP_LSPI);
 | |
| 	pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_SFLASH);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void spi_cs_activate(struct udevice *dev)
 | |
| {
 | |
| 	struct udevice *bus = dev->parent;
 | |
| 	struct tegra_spi_platdata *pdata = dev_get_platdata(bus);
 | |
| 	struct tegra20_sflash_priv *priv = dev_get_priv(bus);
 | |
| 
 | |
| 	/* If it's too soon to do another transaction, wait */
 | |
| 	if (pdata->deactivate_delay_us &&
 | |
| 	    priv->last_transaction_us) {
 | |
| 		ulong delay_us;		/* The delay completed so far */
 | |
| 		delay_us = timer_get_us() - priv->last_transaction_us;
 | |
| 		if (delay_us < pdata->deactivate_delay_us)
 | |
| 			udelay(pdata->deactivate_delay_us - delay_us);
 | |
| 	}
 | |
| 
 | |
| 	/* CS is negated on Tegra, so drive a 1 to get a 0 */
 | |
| 	setbits_le32(&priv->regs->command, SPI_CMD_CS_VAL);
 | |
| }
 | |
| 
 | |
| static void spi_cs_deactivate(struct udevice *dev)
 | |
| {
 | |
| 	struct udevice *bus = dev->parent;
 | |
| 	struct tegra_spi_platdata *pdata = dev_get_platdata(bus);
 | |
| 	struct tegra20_sflash_priv *priv = dev_get_priv(bus);
 | |
| 
 | |
| 	/* CS is negated on Tegra, so drive a 0 to get a 1 */
 | |
| 	clrbits_le32(&priv->regs->command, SPI_CMD_CS_VAL);
 | |
| 
 | |
| 	/* Remember time of this transaction so we can honour the bus delay */
 | |
| 	if (pdata->deactivate_delay_us)
 | |
| 		priv->last_transaction_us = timer_get_us();
 | |
| }
 | |
| 
 | |
| static int tegra20_sflash_xfer(struct udevice *dev, unsigned int bitlen,
 | |
| 			     const void *data_out, void *data_in,
 | |
| 			     unsigned long flags)
 | |
| {
 | |
| 	struct udevice *bus = dev->parent;
 | |
| 	struct tegra20_sflash_priv *priv = dev_get_priv(bus);
 | |
| 	struct spi_regs *regs = priv->regs;
 | |
| 	u32 reg, tmpdout, tmpdin = 0;
 | |
| 	const u8 *dout = data_out;
 | |
| 	u8 *din = data_in;
 | |
| 	int num_bytes;
 | |
| 	int ret;
 | |
| 
 | |
| 	debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
 | |
| 	      __func__, bus->seq, spi_chip_select(dev), dout, din, bitlen);
 | |
| 	if (bitlen % 8)
 | |
| 		return -1;
 | |
| 	num_bytes = bitlen / 8;
 | |
| 
 | |
| 	ret = 0;
 | |
| 
 | |
| 	reg = readl(®s->status);
 | |
| 	writel(reg, ®s->status);	/* Clear all SPI events via R/W */
 | |
| 	debug("spi_xfer entry: STATUS = %08x\n", reg);
 | |
| 
 | |
| 	reg = readl(®s->command);
 | |
| 	reg |= SPI_CMD_TXEN | SPI_CMD_RXEN;
 | |
| 	writel(reg, ®s->command);
 | |
| 	debug("spi_xfer: COMMAND = %08x\n", readl(®s->command));
 | |
| 
 | |
| 	if (flags & SPI_XFER_BEGIN)
 | |
| 		spi_cs_activate(dev);
 | |
| 
 | |
| 	/* handle data in 32-bit chunks */
 | |
| 	while (num_bytes > 0) {
 | |
| 		int bytes;
 | |
| 		int is_read = 0;
 | |
| 		int tm, i;
 | |
| 
 | |
| 		tmpdout = 0;
 | |
| 		bytes = (num_bytes > 4) ?  4 : num_bytes;
 | |
| 
 | |
| 		if (dout != NULL) {
 | |
| 			for (i = 0; i < bytes; ++i)
 | |
| 				tmpdout = (tmpdout << 8) | dout[i];
 | |
| 		}
 | |
| 
 | |
| 		num_bytes -= bytes;
 | |
| 		if (dout)
 | |
| 			dout += bytes;
 | |
| 
 | |
| 		clrsetbits_le32(®s->command, SPI_CMD_BIT_LENGTH_MASK,
 | |
| 				bytes * 8 - 1);
 | |
| 		writel(tmpdout, ®s->tx_fifo);
 | |
| 		setbits_le32(®s->command, SPI_CMD_GO);
 | |
| 
 | |
| 		/*
 | |
| 		 * Wait for SPI transmit FIFO to empty, or to time out.
 | |
| 		 * The RX FIFO status will be read and cleared last
 | |
| 		 */
 | |
| 		for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
 | |
| 			u32 status;
 | |
| 
 | |
| 			status = readl(®s->status);
 | |
| 
 | |
| 			/* We can exit when we've had both RX and TX activity */
 | |
| 			if (is_read && (status & SPI_STAT_TXF_EMPTY))
 | |
| 				break;
 | |
| 
 | |
| 			if ((status & (SPI_STAT_BSY | SPI_STAT_RDY)) !=
 | |
| 					SPI_STAT_RDY)
 | |
| 				tm++;
 | |
| 
 | |
| 			else if (!(status & SPI_STAT_RXF_EMPTY)) {
 | |
| 				tmpdin = readl(®s->rx_fifo);
 | |
| 				is_read = 1;
 | |
| 
 | |
| 				/* swap bytes read in */
 | |
| 				if (din != NULL) {
 | |
| 					for (i = bytes - 1; i >= 0; --i) {
 | |
| 						din[i] = tmpdin & 0xff;
 | |
| 						tmpdin >>= 8;
 | |
| 					}
 | |
| 					din += bytes;
 | |
| 				}
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		if (tm >= SPI_TIMEOUT)
 | |
| 			ret = tm;
 | |
| 
 | |
| 		/* clear ACK RDY, etc. bits */
 | |
| 		writel(readl(®s->status), ®s->status);
 | |
| 	}
 | |
| 
 | |
| 	if (flags & SPI_XFER_END)
 | |
| 		spi_cs_deactivate(dev);
 | |
| 
 | |
| 	debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n",
 | |
| 		tmpdin, readl(®s->status));
 | |
| 
 | |
| 	if (ret) {
 | |
| 		printf("spi_xfer: timeout during SPI transfer, tm %d\n", ret);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tegra20_sflash_set_speed(struct udevice *bus, uint speed)
 | |
| {
 | |
| 	struct tegra_spi_platdata *plat = bus->platdata;
 | |
| 	struct tegra20_sflash_priv *priv = dev_get_priv(bus);
 | |
| 
 | |
| 	if (speed > plat->frequency)
 | |
| 		speed = plat->frequency;
 | |
| 	priv->freq = speed;
 | |
| 	debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tegra20_sflash_set_mode(struct udevice *bus, uint mode)
 | |
| {
 | |
| 	struct tegra20_sflash_priv *priv = dev_get_priv(bus);
 | |
| 
 | |
| 	priv->mode = mode;
 | |
| 	debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct dm_spi_ops tegra20_sflash_ops = {
 | |
| 	.claim_bus	= tegra20_sflash_claim_bus,
 | |
| 	.xfer		= tegra20_sflash_xfer,
 | |
| 	.set_speed	= tegra20_sflash_set_speed,
 | |
| 	.set_mode	= tegra20_sflash_set_mode,
 | |
| 	.cs_info	= tegra20_sflash_cs_info,
 | |
| };
 | |
| 
 | |
| static const struct udevice_id tegra20_sflash_ids[] = {
 | |
| 	{ .compatible = "nvidia,tegra20-sflash" },
 | |
| 	{ }
 | |
| };
 | |
| 
 | |
| U_BOOT_DRIVER(tegra20_sflash) = {
 | |
| 	.name	= "tegra20_sflash",
 | |
| 	.id	= UCLASS_SPI,
 | |
| 	.of_match = tegra20_sflash_ids,
 | |
| 	.ops	= &tegra20_sflash_ops,
 | |
| 	.ofdata_to_platdata = tegra20_sflash_ofdata_to_platdata,
 | |
| 	.platdata_auto_alloc_size = sizeof(struct tegra_spi_platdata),
 | |
| 	.priv_auto_alloc_size = sizeof(struct tegra20_sflash_priv),
 | |
| 	.probe	= tegra20_sflash_probe,
 | |
| };
 |