mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-12-22 18:01:29 +01:00
16cfbbbe2b
The LVDS Display Interface Transmitter handles the LVDS protocol:
it maps the pixels received from the upstream Pixel-DMA (LTDC)
onto the LVDS PHY.
The LVDS controller driver supports the following high-level features:
• FDP-Link-I and OpenLDI (v0.95) protocols
• Single-Link or Dual-Link operation
• Single-Display or Double-Display (with the same content
duplicated on both)
• Flexible Bit-Mapping, including JEIDA and VESA
• RGB888 or RGB666 output
• Synchronous design, with one input pixel per clock cycle
• No resolution limitation.
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.