mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-11-04 02:11:25 +01:00
ff4e66e93c
The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and can be confusing when reading the code. Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used for system memory mapping purposes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
287 lines
7.6 KiB
C
287 lines
7.6 KiB
C
/*
|
|
* Copyright (C) 2006 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
|
|
/*
|
|
* PCI Configuration space access support for MPC83xx PCI Bridge
|
|
*/
|
|
#include <asm/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <i2c.h>
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#endif
|
|
|
|
#include <asm/fsl_i2c.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#define PCI_FUNCTION_CONFIG 0x44
|
|
#define PCI_FUNCTION_CFG_LOCK 0x20
|
|
|
|
/*
|
|
* Initialize PCI Devices, report devices found
|
|
*/
|
|
#ifndef CONFIG_PCI_PNP
|
|
static struct pci_config_table pci_mpc83xxemds_config_table[] = {
|
|
{
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
pci_cfgfunc_config_device,
|
|
{PCI_ENET0_IOADDR,
|
|
PCI_ENET0_MEMADDR,
|
|
PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
|
|
},
|
|
{}
|
|
}
|
|
#endif
|
|
static struct pci_controller hose[] = {
|
|
{
|
|
#ifndef CONFIG_PCI_PNP
|
|
config_table:pci_mpc83xxemds_config_table,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
/**********************************************************************
|
|
* pci_init_board()
|
|
*********************************************************************/
|
|
void pci_init_board(void)
|
|
#ifdef CONFIG_PCISLAVE
|
|
{
|
|
u16 reg16;
|
|
volatile immap_t *immr;
|
|
volatile law83xx_t *pci_law;
|
|
volatile pot83xx_t *pci_pot;
|
|
volatile pcictrl83xx_t *pci_ctrl;
|
|
volatile pciconf83xx_t *pci_conf;
|
|
|
|
immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
pci_law = immr->sysconf.pcilaw;
|
|
pci_pot = immr->ios.pot;
|
|
pci_ctrl = immr->pci_ctrl;
|
|
pci_conf = immr->pci_conf;
|
|
/*
|
|
* Configure PCI Inbound Translation Windows
|
|
*/
|
|
pci_ctrl[0].pitar0 = 0x0;
|
|
pci_ctrl[0].pibar0 = 0x0;
|
|
pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
|
|
PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
|
|
|
|
pci_ctrl[0].pitar1 = 0x0;
|
|
pci_ctrl[0].pibar1 = 0x0;
|
|
pci_ctrl[0].piebar1 = 0x0;
|
|
pci_ctrl[0].piwar1 &= ~PIWAR_EN;
|
|
|
|
pci_ctrl[0].pitar2 = 0x0;
|
|
pci_ctrl[0].pibar2 = 0x0;
|
|
pci_ctrl[0].piebar2 = 0x0;
|
|
pci_ctrl[0].piwar2 &= ~PIWAR_EN;
|
|
|
|
hose[0].first_busno = 0;
|
|
hose[0].last_busno = 0xff;
|
|
pci_setup_indirect(&hose[0],
|
|
(CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
|
|
reg16 = 0xff;
|
|
|
|
pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
|
|
PCI_COMMAND, ®16);
|
|
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
|
|
pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
|
|
PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Clear non-reserved bits in status register.
|
|
*/
|
|
pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
|
|
PCI_STATUS, 0xffff);
|
|
pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
|
|
PCI_LATENCY_TIMER, 0x80);
|
|
|
|
/*
|
|
* Unlock configuration lock in PCI function configuration register.
|
|
*/
|
|
pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
|
|
PCI_FUNCTION_CONFIG, ®16);
|
|
reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
|
|
pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
|
|
PCI_FUNCTION_CONFIG, reg16);
|
|
|
|
printf("Enabled PCI 32bit Agent Mode\n");
|
|
}
|
|
#else
|
|
{
|
|
volatile immap_t *immr;
|
|
volatile clk83xx_t *clk;
|
|
volatile law83xx_t *pci_law;
|
|
volatile pot83xx_t *pci_pot;
|
|
volatile pcictrl83xx_t *pci_ctrl;
|
|
volatile pciconf83xx_t *pci_conf;
|
|
|
|
u16 reg16;
|
|
u32 val32;
|
|
u32 dev;
|
|
|
|
immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
clk = (clk83xx_t *) & immr->clk;
|
|
pci_law = immr->sysconf.pcilaw;
|
|
pci_pot = immr->ios.pot;
|
|
pci_ctrl = immr->pci_ctrl;
|
|
pci_conf = immr->pci_conf;
|
|
/*
|
|
* Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
|
|
*/
|
|
val32 = clk->occr;
|
|
udelay(2000);
|
|
#if defined(PCI_66M)
|
|
clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
|
|
printf("PCI clock is 66MHz\n");
|
|
#elif defined(PCI_33M)
|
|
clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
|
|
OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
|
|
printf("PCI clock is 33MHz\n");
|
|
#else
|
|
clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
|
|
printf("PCI clock is 66MHz\n");
|
|
#endif
|
|
udelay(2000);
|
|
|
|
/*
|
|
* Configure PCI Local Access Windows
|
|
*/
|
|
pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
|
|
pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
|
|
|
|
pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
|
|
pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
|
|
|
|
/*
|
|
* Configure PCI Outbound Translation Windows
|
|
*/
|
|
|
|
/* PCI mem space - prefetch */
|
|
pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
|
|
pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
|
|
pci_pot[0].pocmr =
|
|
POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
|
|
|
|
/* PCI mmio - non-prefetch mem space */
|
|
pci_pot[1].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
|
|
pci_pot[1].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
|
|
pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
|
|
|
|
/* PCI IO space */
|
|
pci_pot[2].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
|
|
pci_pot[2].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
|
|
pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
|
|
|
|
/*
|
|
* Configure PCI Inbound Translation Windows
|
|
*/
|
|
pci_ctrl[0].pitar1 = (CONFIG_SYS_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
|
|
pci_ctrl[0].pibar1 = (CONFIG_SYS_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
|
|
pci_ctrl[0].piebar1 = 0x0;
|
|
pci_ctrl[0].piwar1 =
|
|
PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
|
|
PIWAR_IWS_2G;
|
|
|
|
/*
|
|
* Release PCI RST Output signal
|
|
*/
|
|
udelay(2000);
|
|
pci_ctrl[0].gcr = 1;
|
|
udelay(2000);
|
|
|
|
hose[0].first_busno = 0;
|
|
hose[0].last_busno = 0xff;
|
|
|
|
/* PCI memory prefetch space */
|
|
pci_set_region(hose[0].regions + 0,
|
|
CONFIG_SYS_PCI_MEM_BASE,
|
|
CONFIG_SYS_PCI_MEM_PHYS,
|
|
CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
|
|
|
|
/* PCI memory space */
|
|
pci_set_region(hose[0].regions + 1,
|
|
CONFIG_SYS_PCI_MMIO_BASE,
|
|
CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM);
|
|
|
|
/* PCI IO space */
|
|
pci_set_region(hose[0].regions + 2,
|
|
CONFIG_SYS_PCI_IO_BASE,
|
|
CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
|
|
|
|
/* System memory space */
|
|
pci_set_region(hose[0].regions + 3,
|
|
CONFIG_SYS_PCI_SLV_MEM_LOCAL,
|
|
CONFIG_SYS_PCI_SLV_MEM_BUS,
|
|
CONFIG_SYS_PCI_SLV_MEM_SIZE,
|
|
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
|
|
|
|
hose[0].region_count = 4;
|
|
|
|
pci_setup_indirect(&hose[0],
|
|
(CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
|
|
|
|
pci_register_hose(hose);
|
|
|
|
/*
|
|
* Write command register
|
|
*/
|
|
reg16 = 0xff;
|
|
dev = PCI_BDF(0, 0, 0);
|
|
pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16);
|
|
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Clear non-reserved bits in status register.
|
|
*/
|
|
pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
|
|
pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
|
|
pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
|
|
|
|
/*
|
|
* Hose scan.
|
|
*/
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
}
|
|
#endif /* CONFIG_PCISLAVE */
|
|
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
void ft_pci_setup(void *blob, bd_t *bd)
|
|
{
|
|
int nodeoffset;
|
|
int tmp[2];
|
|
const char *path;
|
|
|
|
nodeoffset = fdt_path_offset(blob, "/aliases");
|
|
if (nodeoffset >= 0) {
|
|
path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
|
|
if (path) {
|
|
tmp[0] = cpu_to_be32(hose[0].first_busno);
|
|
tmp[1] = cpu_to_be32(hose[0].last_busno);
|
|
do_fixup_by_path(blob, path, "bus-range",
|
|
&tmp, sizeof(tmp), 1);
|
|
|
|
tmp[0] = cpu_to_be32(gd->pci_clk);
|
|
do_fixup_by_path(blob, path, "clock-frequency",
|
|
&tmp, sizeof(tmp[0]), 1);
|
|
}
|
|
}
|
|
}
|
|
#endif /* CONFIG_OF_LIBFDT */
|
|
#endif /* CONFIG_PCI */
|