Wenbin Song 1be8d10be4 freescale: vid: Return i2c mux to default channel ...

IR chip is on one of the channels on multiplexed I2C-bus.
Reset to default channel after accessing.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

2016-03-21 12:42:15 -07:00

..

p_corenet

powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041

2015-07-31 08:50:18 -07:00

arm_sleep.c

qe: move drivers/qe/qe.h to include/fsl_qe.h

2016-02-24 08:51:13 -08:00

cadmus.c

Coding Style cleanup: remove trailing white space

2013-10-14 16:06:53 -04:00

cadmus.h

Coding Style cleanup: remove trailing white space

2013-10-14 16:06:53 -04:00

cds_pci_ft.c

fdt: Allow ft_board_setup() to report failure

2014-11-21 04:43:15 +01:00

cds_via.c

Coding Style cleanup: remove trailing white space

2013-10-14 16:06:53 -04:00

cmd_esbc_validate.c

secure_boot: change error handler for esbc_validate

2016-01-27 08:13:03 -08:00

dcu_sii9022a.c

video: dcu: Add Sii9022A HDMI Transmitter support

2014-09-08 10:30:35 -07:00

dcu_sii9022a.h

video: dcu: Add Sii9022A HDMI Transmitter support

2014-09-08 10:30:35 -07:00

diu_ch7301.c

fsl/diu: ch7301 encoder split off from t1040qds/diu.c

2014-08-12 12:26:46 -07:00

diu_ch7301.h

fsl/diu: ch7301 encoder split off from t1040qds/diu.c

2014-08-12 12:26:46 -07:00

eeprom.h

Coding Style cleanup: remove trailing white space

2013-10-14 16:06:53 -04:00

fman.c

freescale: fman: make sure phy-handle property is big endian

2015-12-13 18:27:28 -08:00

fman.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

fsl_chain_of_trust.c

secure_boot: enable chain of trust for ARM platforms

2016-01-27 08:12:49 -08:00

fsl_validate.c

secure_boot: change error handler for esbc_validate

2016-01-27 08:13:03 -08:00

ics307_clk.c

cosmetic: replace MIN, MAX with min, max

2014-09-24 18:30:29 -04:00

ics307_clk.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

idt8t49n222a_serdes_clk.c

powerpc/mpc85xx: Cleanup license header in source files

2013-08-12 15:04:24 -07:00

idt8t49n222a_serdes_clk.h

powerpc/mpc85xx: Cleanup license header in source files

2013-08-12 15:04:24 -07:00

ls102xa_stream_id.c

arm: ls1021x: Add support for initializing CAAM's stream id

2015-02-24 13:11:05 -08:00

Makefile

secure_boot: enable chain of trust for ARM platforms

2016-01-27 08:12:49 -08:00

mpc85xx_sleep.c

qe: move drivers/qe/qe.h to include/fsl_qe.h

2016-02-24 08:51:13 -08:00

ngpixis.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

ngpixis.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

ns_access.c

armv7/ls1021a: move ns_access to common file

2015-10-29 10:33:58 -07:00

pfuze.c

pfuze: Fix unsigned variable for less-than-zero comparison

2016-01-07 17:48:25 +01:00

pfuze.h

pmic:pfuze implement pmic_mode_init

2015-02-11 12:27:46 +01:00

pixis.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

pixis.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

pq-mds-pib.c

powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support

2015-01-23 16:53:00 -05:00

pq-mds-pib.h

mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support

2007-08-16 23:12:11 -05:00

qixis.c

freescale/qixis: Add support for booting from SD/QSPI

2016-01-25 08:24:15 -08:00

qixis.h

mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC Legacy Adapter Card

2015-11-02 08:50:29 -08:00

sdhc_boot.c

block: pass block dev not num to read/write/erase()

2016-01-13 21:05:18 -05:00

sgmii_riser.c

powerpc/sgmii: To support PHY link state auto detect in SGMII mode

2012-08-08 18:32:15 -05:00

sgmii_riser.h

Fixup SGMII PHY ids in the device tree

2009-02-16 18:05:54 -06:00

sleep.h

fsl/sleep: updated the deep sleep framework for QorIQ platforms

2014-12-11 09:41:18 -08:00

sys_eeprom.c

board/fsl/common: Fix eeprom system version endianness

2015-07-20 11:44:34 -07:00

via.h

Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.

2007-12-11 22:34:20 -06:00

vid.c

freescale: vid: Return i2c mux to default channel

2016-03-21 12:42:15 -07:00

vid.h

board/freescale/common: Check IR chip mode for VID support

2016-01-25 12:37:03 -08:00

vsc3316_3308.c

powerpc/b4860qds: add workaround for XFI

2014-12-05 08:06:13 -08:00

vsc3316_3308.h

powerpc/b4860qds: add workaround for XFI

2014-12-05 08:06:13 -08:00

zm7300.c

board/freescale/common: ZM7300 driver

2014-05-13 08:20:31 -07:00

zm7300.h

board/freescale/common: ZM7300 driver

2014-05-13 08:20:31 -07:00