mirror of
				https://source.denx.de/u-boot/u-boot.git
				synced 2025-10-31 00:11:51 +01:00 
			
		
		
		
	Hello, I ran into a problem with the JFFS2 filesystem driver implemented in U-Boot. I've got a NAND device that has correctable ECC errors (corrected somewhere in mtd/nand/nand_base.c). The NAND driver tells the filesystem layer (jffs2_1pass.c) above that there occurred correctable ECC errors and returns with a "value > 0". The JFFS2 driver recognizes the corrected ECC errors as real error and skips this block because the only accepts a "return value == 0" as correct. This problem exists for over 8 years (I checked version 2010.09) so I'm a little bit worried that I interpreted something wrong or didn't get the whole context. Can someone confirm this bug (and the bugfix) in the u-boot jffs2 driver? There was a mail in 2012 that mentioned the same problem, but there was no patch: http://u-boot.10912.n7.nabble.com/JFFS2-seems-to-drop-nand-data-with-ECC-corrections-td142008.html Sometime after this discussion the return value of nand_read() changed from -EUCLEAN as correctable ECC error to a positive value with the count of ECC corrected errors. With kind reguards, Uwe Engling
		
			
				
	
	
		
			1947 lines
		
	
	
		
			49 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1947 lines
		
	
	
		
			49 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
| -------------------------------------------------------------------------
 | |
|  * Filename:      jffs2.c
 | |
|  * Version:       $Id: jffs2_1pass.c,v 1.7 2002/01/25 01:56:47 nyet Exp $
 | |
|  * Copyright:     Copyright (C) 2001, Russ Dill
 | |
|  * Author:        Russ Dill <Russ.Dill@asu.edu>
 | |
|  * Description:   Module to load kernel from jffs2
 | |
|  *-----------------------------------------------------------------------*/
 | |
| /*
 | |
|  * some portions of this code are taken from jffs2, and as such, the
 | |
|  * following copyright notice is included.
 | |
|  *
 | |
|  * JFFS2 -- Journalling Flash File System, Version 2.
 | |
|  *
 | |
|  * Copyright (C) 2001 Red Hat, Inc.
 | |
|  *
 | |
|  * Created by David Woodhouse <dwmw2@cambridge.redhat.com>
 | |
|  *
 | |
|  * The original JFFS, from which the design for JFFS2 was derived,
 | |
|  * was designed and implemented by Axis Communications AB.
 | |
|  *
 | |
|  * The contents of this file are subject to the Red Hat eCos Public
 | |
|  * License Version 1.1 (the "Licence"); you may not use this file
 | |
|  * except in compliance with the Licence.  You may obtain a copy of
 | |
|  * the Licence at http://www.redhat.com/
 | |
|  *
 | |
|  * Software distributed under the Licence is distributed on an "AS IS"
 | |
|  * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
 | |
|  * See the Licence for the specific language governing rights and
 | |
|  * limitations under the Licence.
 | |
|  *
 | |
|  * The Original Code is JFFS2 - Journalling Flash File System, version 2
 | |
|  *
 | |
|  * Alternatively, the contents of this file may be used under the
 | |
|  * terms of the GNU General Public License version 2 (the "GPL"), in
 | |
|  * which case the provisions of the GPL are applicable instead of the
 | |
|  * above.  If you wish to allow the use of your version of this file
 | |
|  * only under the terms of the GPL and not to allow others to use your
 | |
|  * version of this file under the RHEPL, indicate your decision by
 | |
|  * deleting the provisions above and replace them with the notice and
 | |
|  * other provisions required by the GPL.  If you do not delete the
 | |
|  * provisions above, a recipient may use your version of this file
 | |
|  * under either the RHEPL or the GPL.
 | |
|  *
 | |
|  * $Id: jffs2_1pass.c,v 1.7 2002/01/25 01:56:47 nyet Exp $
 | |
|  *
 | |
|  */
 | |
| 
 | |
| /* Ok, so anyone who knows the jffs2 code will probably want to get a papar
 | |
|  * bag to throw up into before reading this code. I looked through the jffs2
 | |
|  * code, the caching scheme is very elegant. I tried to keep the version
 | |
|  * for a bootloader as small and simple as possible. Instead of worring about
 | |
|  * unneccesary data copies, node scans, etc, I just optimized for the known
 | |
|  * common case, a kernel, which looks like:
 | |
|  *	(1) most pages are 4096 bytes
 | |
|  *	(2) version numbers are somewhat sorted in acsending order
 | |
|  *	(3) multiple compressed blocks making up one page is uncommon
 | |
|  *
 | |
|  * So I create a linked list of decending version numbers (insertions at the
 | |
|  * head), and then for each page, walk down the list, until a matching page
 | |
|  * with 4096 bytes is found, and then decompress the watching pages in
 | |
|  * reverse order.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| /*
 | |
|  * Adapted by Nye Liu <nyet@zumanetworks.com> and
 | |
|  * Rex Feany <rfeany@zumanetworks.com>
 | |
|  * on Jan/2002 for U-Boot.
 | |
|  *
 | |
|  * Clipped out all the non-1pass functions, cleaned up warnings,
 | |
|  * wrappers, etc. No major changes to the code.
 | |
|  * Please, he really means it when he said have a paper bag
 | |
|  * handy. We needed it ;).
 | |
|  *
 | |
|  */
 | |
| 
 | |
| /*
 | |
|  * Bugfixing by Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>, (C) Mar/2003
 | |
|  *
 | |
|  * - overhaul of the memory management. Removed much of the "paper-bagging"
 | |
|  *   in that part of the code, fixed several bugs, now frees memory when
 | |
|  *   partition is changed.
 | |
|  *   It's still ugly :-(
 | |
|  * - fixed a bug in jffs2_1pass_read_inode where the file length calculation
 | |
|  *   was incorrect. Removed a bit of the paper-bagging as well.
 | |
|  * - removed double crc calculation for fragment headers in jffs2_private.h
 | |
|  *   for speedup.
 | |
|  * - scan_empty rewritten in a more "standard" manner (non-paperbag, that is).
 | |
|  * - spinning wheel now spins depending on how much memory has been scanned
 | |
|  * - lots of small changes all over the place to "improve" readability.
 | |
|  * - implemented fragment sorting to ensure that the newest data is copied
 | |
|  *   if there are multiple copies of fragments for a certain file offset.
 | |
|  *
 | |
|  * The fragment sorting feature must be enabled by CONFIG_SYS_JFFS2_SORT_FRAGMENTS.
 | |
|  * Sorting is done while adding fragments to the lists, which is more or less a
 | |
|  * bubble sort. This takes a lot of time, and is most probably not an issue if
 | |
|  * the boot filesystem is always mounted readonly.
 | |
|  *
 | |
|  * You should define it if the boot filesystem is mounted writable, and updates
 | |
|  * to the boot files are done by copying files to that filesystem.
 | |
|  *
 | |
|  *
 | |
|  * There's a big issue left: endianess is completely ignored in this code. Duh!
 | |
|  *
 | |
|  *
 | |
|  * You still should have paper bags at hand :-(. The code lacks more or less
 | |
|  * any comment, and is still arcane and difficult to read in places. As this
 | |
|  * might be incompatible with any new code from the jffs2 maintainers anyway,
 | |
|  * it should probably be dumped and replaced by something like jffs2reader!
 | |
|  */
 | |
| 
 | |
| 
 | |
| #include <common.h>
 | |
| #include <config.h>
 | |
| #include <malloc.h>
 | |
| #include <div64.h>
 | |
| #include <linux/compiler.h>
 | |
| #include <linux/stat.h>
 | |
| #include <linux/time.h>
 | |
| #include <watchdog.h>
 | |
| #include <jffs2/jffs2.h>
 | |
| #include <jffs2/jffs2_1pass.h>
 | |
| #include <linux/compat.h>
 | |
| #include <linux/errno.h>
 | |
| 
 | |
| #include "jffs2_private.h"
 | |
| 
 | |
| 
 | |
| #define	NODE_CHUNK	1024	/* size of memory allocation chunk in b_nodes */
 | |
| #define	SPIN_BLKSIZE	18	/* spin after having scanned 1<<BLKSIZE bytes */
 | |
| 
 | |
| /* Debugging switches */
 | |
| #undef	DEBUG_DIRENTS		/* print directory entry list after scan */
 | |
| #undef	DEBUG_FRAGMENTS		/* print fragment list after scan */
 | |
| #undef	DEBUG			/* enable debugging messages */
 | |
| 
 | |
| 
 | |
| #ifdef  DEBUG
 | |
| # define DEBUGF(fmt,args...)	printf(fmt ,##args)
 | |
| #else
 | |
| # define DEBUGF(fmt,args...)
 | |
| #endif
 | |
| 
 | |
| #include "summary.h"
 | |
| 
 | |
| /* keeps pointer to currentlu processed partition */
 | |
| static struct part_info *current_part;
 | |
| 
 | |
| #if (defined(CONFIG_JFFS2_NAND) && \
 | |
|      defined(CONFIG_CMD_NAND) )
 | |
| #include <nand.h>
 | |
| /*
 | |
|  * Support for jffs2 on top of NAND-flash
 | |
|  *
 | |
|  * NAND memory isn't mapped in processor's address space,
 | |
|  * so data should be fetched from flash before
 | |
|  * being processed. This is exactly what functions declared
 | |
|  * here do.
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #define NAND_PAGE_SIZE 512
 | |
| #define NAND_PAGE_SHIFT 9
 | |
| #define NAND_PAGE_MASK (~(NAND_PAGE_SIZE-1))
 | |
| 
 | |
| #ifndef NAND_CACHE_PAGES
 | |
| #define NAND_CACHE_PAGES 16
 | |
| #endif
 | |
| #define NAND_CACHE_SIZE (NAND_CACHE_PAGES*NAND_PAGE_SIZE)
 | |
| 
 | |
| static u8* nand_cache = NULL;
 | |
| static u32 nand_cache_off = (u32)-1;
 | |
| 
 | |
| static int read_nand_cached(u32 off, u32 size, u_char *buf)
 | |
| {
 | |
| 	struct mtdids *id = current_part->dev->id;
 | |
| 	struct mtd_info *mtd;
 | |
| 	u32 bytes_read = 0;
 | |
| 	size_t retlen;
 | |
| 	int cpy_bytes;
 | |
| 
 | |
| 	mtd = get_nand_dev_by_index(id->num);
 | |
| 	if (!mtd)
 | |
| 		return -1;
 | |
| 
 | |
| 	while (bytes_read < size) {
 | |
| 		if ((off + bytes_read < nand_cache_off) ||
 | |
| 		    (off + bytes_read >= nand_cache_off+NAND_CACHE_SIZE)) {
 | |
| 			nand_cache_off = (off + bytes_read) & NAND_PAGE_MASK;
 | |
| 			if (!nand_cache) {
 | |
| 				/* This memory never gets freed but 'cause
 | |
| 				   it's a bootloader, nobody cares */
 | |
| 				nand_cache = malloc(NAND_CACHE_SIZE);
 | |
| 				if (!nand_cache) {
 | |
| 					printf("read_nand_cached: can't alloc cache size %d bytes\n",
 | |
| 					       NAND_CACHE_SIZE);
 | |
| 					return -1;
 | |
| 				}
 | |
| 			}
 | |
| 
 | |
| 			retlen = NAND_CACHE_SIZE;
 | |
| 			if (nand_read(mtd, nand_cache_off,
 | |
| 				      &retlen, nand_cache) < 0 ||
 | |
| 					retlen != NAND_CACHE_SIZE) {
 | |
| 				printf("read_nand_cached: error reading nand off %#x size %d bytes\n",
 | |
| 						nand_cache_off, NAND_CACHE_SIZE);
 | |
| 				return -1;
 | |
| 			}
 | |
| 		}
 | |
| 		cpy_bytes = nand_cache_off + NAND_CACHE_SIZE - (off + bytes_read);
 | |
| 		if (cpy_bytes > size - bytes_read)
 | |
| 			cpy_bytes = size - bytes_read;
 | |
| 		memcpy(buf + bytes_read,
 | |
| 		       nand_cache + off + bytes_read - nand_cache_off,
 | |
| 		       cpy_bytes);
 | |
| 		bytes_read += cpy_bytes;
 | |
| 	}
 | |
| 	return bytes_read;
 | |
| }
 | |
| 
 | |
| static void *get_fl_mem_nand(u32 off, u32 size, void *ext_buf)
 | |
| {
 | |
| 	u_char *buf = ext_buf ? (u_char*)ext_buf : (u_char*)malloc(size);
 | |
| 
 | |
| 	if (NULL == buf) {
 | |
| 		printf("get_fl_mem_nand: can't alloc %d bytes\n", size);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 	if (read_nand_cached(off, size, buf) < 0) {
 | |
| 		if (!ext_buf)
 | |
| 			free(buf);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	return buf;
 | |
| }
 | |
| 
 | |
| static void *get_node_mem_nand(u32 off, void *ext_buf)
 | |
| {
 | |
| 	struct jffs2_unknown_node node;
 | |
| 	void *ret = NULL;
 | |
| 
 | |
| 	if (NULL == get_fl_mem_nand(off, sizeof(node), &node))
 | |
| 		return NULL;
 | |
| 
 | |
| 	if (!(ret = get_fl_mem_nand(off, node.magic ==
 | |
| 			       JFFS2_MAGIC_BITMASK ? node.totlen : sizeof(node),
 | |
| 			       ext_buf))) {
 | |
| 		printf("off = %#x magic %#x type %#x node.totlen = %d\n",
 | |
| 		       off, node.magic, node.nodetype, node.totlen);
 | |
| 	}
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void put_fl_mem_nand(void *buf)
 | |
| {
 | |
| 	free(buf);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| #if defined(CONFIG_CMD_ONENAND)
 | |
| 
 | |
| #include <linux/mtd/mtd.h>
 | |
| #include <linux/mtd/onenand.h>
 | |
| #include <onenand_uboot.h>
 | |
| 
 | |
| #define ONENAND_PAGE_SIZE 2048
 | |
| #define ONENAND_PAGE_SHIFT 11
 | |
| #define ONENAND_PAGE_MASK (~(ONENAND_PAGE_SIZE-1))
 | |
| 
 | |
| #ifndef ONENAND_CACHE_PAGES
 | |
| #define ONENAND_CACHE_PAGES 4
 | |
| #endif
 | |
| #define ONENAND_CACHE_SIZE (ONENAND_CACHE_PAGES*ONENAND_PAGE_SIZE)
 | |
| 
 | |
| static u8* onenand_cache;
 | |
| static u32 onenand_cache_off = (u32)-1;
 | |
| 
 | |
| static int read_onenand_cached(u32 off, u32 size, u_char *buf)
 | |
| {
 | |
| 	u32 bytes_read = 0;
 | |
| 	size_t retlen;
 | |
| 	int cpy_bytes;
 | |
| 
 | |
| 	while (bytes_read < size) {
 | |
| 		if ((off + bytes_read < onenand_cache_off) ||
 | |
| 		    (off + bytes_read >= onenand_cache_off + ONENAND_CACHE_SIZE)) {
 | |
| 			onenand_cache_off = (off + bytes_read) & ONENAND_PAGE_MASK;
 | |
| 			if (!onenand_cache) {
 | |
| 				/* This memory never gets freed but 'cause
 | |
| 				   it's a bootloader, nobody cares */
 | |
| 				onenand_cache = malloc(ONENAND_CACHE_SIZE);
 | |
| 				if (!onenand_cache) {
 | |
| 					printf("read_onenand_cached: can't alloc cache size %d bytes\n",
 | |
| 					       ONENAND_CACHE_SIZE);
 | |
| 					return -1;
 | |
| 				}
 | |
| 			}
 | |
| 
 | |
| 			retlen = ONENAND_CACHE_SIZE;
 | |
| 			if (onenand_read(&onenand_mtd, onenand_cache_off, retlen,
 | |
| 						&retlen, onenand_cache) < 0 ||
 | |
| 					retlen != ONENAND_CACHE_SIZE) {
 | |
| 				printf("read_onenand_cached: error reading nand off %#x size %d bytes\n",
 | |
| 					onenand_cache_off, ONENAND_CACHE_SIZE);
 | |
| 				return -1;
 | |
| 			}
 | |
| 		}
 | |
| 		cpy_bytes = onenand_cache_off + ONENAND_CACHE_SIZE - (off + bytes_read);
 | |
| 		if (cpy_bytes > size - bytes_read)
 | |
| 			cpy_bytes = size - bytes_read;
 | |
| 		memcpy(buf + bytes_read,
 | |
| 		       onenand_cache + off + bytes_read - onenand_cache_off,
 | |
| 		       cpy_bytes);
 | |
| 		bytes_read += cpy_bytes;
 | |
| 	}
 | |
| 	return bytes_read;
 | |
| }
 | |
| 
 | |
| static void *get_fl_mem_onenand(u32 off, u32 size, void *ext_buf)
 | |
| {
 | |
| 	u_char *buf = ext_buf ? (u_char *)ext_buf : (u_char *)malloc(size);
 | |
| 
 | |
| 	if (NULL == buf) {
 | |
| 		printf("get_fl_mem_onenand: can't alloc %d bytes\n", size);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 	if (read_onenand_cached(off, size, buf) < 0) {
 | |
| 		if (!ext_buf)
 | |
| 			free(buf);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	return buf;
 | |
| }
 | |
| 
 | |
| static void *get_node_mem_onenand(u32 off, void *ext_buf)
 | |
| {
 | |
| 	struct jffs2_unknown_node node;
 | |
| 	void *ret = NULL;
 | |
| 
 | |
| 	if (NULL == get_fl_mem_onenand(off, sizeof(node), &node))
 | |
| 		return NULL;
 | |
| 
 | |
| 	ret = get_fl_mem_onenand(off, node.magic ==
 | |
| 			JFFS2_MAGIC_BITMASK ? node.totlen : sizeof(node),
 | |
| 			ext_buf);
 | |
| 	if (!ret) {
 | |
| 		printf("off = %#x magic %#x type %#x node.totlen = %d\n",
 | |
| 		       off, node.magic, node.nodetype, node.totlen);
 | |
| 	}
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void put_fl_mem_onenand(void *buf)
 | |
| {
 | |
| 	free(buf);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| 
 | |
| #if defined(CONFIG_CMD_FLASH)
 | |
| /*
 | |
|  * Support for jffs2 on top of NOR-flash
 | |
|  *
 | |
|  * NOR flash memory is mapped in processor's address space,
 | |
|  * just return address.
 | |
|  */
 | |
| static inline void *get_fl_mem_nor(u32 off, u32 size, void *ext_buf)
 | |
| {
 | |
| 	u32 addr = off;
 | |
| 	struct mtdids *id = current_part->dev->id;
 | |
| 
 | |
| 	extern flash_info_t flash_info[];
 | |
| 	flash_info_t *flash = &flash_info[id->num];
 | |
| 
 | |
| 	addr += flash->start[0];
 | |
| 	if (ext_buf) {
 | |
| 		memcpy(ext_buf, (void *)addr, size);
 | |
| 		return ext_buf;
 | |
| 	}
 | |
| 	return (void*)addr;
 | |
| }
 | |
| 
 | |
| static inline void *get_node_mem_nor(u32 off, void *ext_buf)
 | |
| {
 | |
| 	struct jffs2_unknown_node *pNode;
 | |
| 
 | |
| 	/* pNode will point directly to flash - don't provide external buffer
 | |
| 	   and don't care about size */
 | |
| 	pNode = get_fl_mem_nor(off, 0, NULL);
 | |
| 	return (void *)get_fl_mem_nor(off, pNode->magic == JFFS2_MAGIC_BITMASK ?
 | |
| 			pNode->totlen : sizeof(*pNode), ext_buf);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * Generic jffs2 raw memory and node read routines.
 | |
|  *
 | |
|  */
 | |
| static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
 | |
| {
 | |
| 	struct mtdids *id = current_part->dev->id;
 | |
| 
 | |
| 	switch(id->type) {
 | |
| #if defined(CONFIG_CMD_FLASH)
 | |
| 	case MTD_DEV_TYPE_NOR:
 | |
| 		return get_fl_mem_nor(off, size, ext_buf);
 | |
| 		break;
 | |
| #endif
 | |
| #if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
 | |
| 	case MTD_DEV_TYPE_NAND:
 | |
| 		return get_fl_mem_nand(off, size, ext_buf);
 | |
| 		break;
 | |
| #endif
 | |
| #if defined(CONFIG_CMD_ONENAND)
 | |
| 	case MTD_DEV_TYPE_ONENAND:
 | |
| 		return get_fl_mem_onenand(off, size, ext_buf);
 | |
| 		break;
 | |
| #endif
 | |
| 	default:
 | |
| 		printf("get_fl_mem: unknown device type, " \
 | |
| 			"using raw offset!\n");
 | |
| 	}
 | |
| 	return (void*)off;
 | |
| }
 | |
| 
 | |
| static inline void *get_node_mem(u32 off, void *ext_buf)
 | |
| {
 | |
| 	struct mtdids *id = current_part->dev->id;
 | |
| 
 | |
| 	switch(id->type) {
 | |
| #if defined(CONFIG_CMD_FLASH)
 | |
| 	case MTD_DEV_TYPE_NOR:
 | |
| 		return get_node_mem_nor(off, ext_buf);
 | |
| 		break;
 | |
| #endif
 | |
| #if defined(CONFIG_JFFS2_NAND) && \
 | |
|     defined(CONFIG_CMD_NAND)
 | |
| 	case MTD_DEV_TYPE_NAND:
 | |
| 		return get_node_mem_nand(off, ext_buf);
 | |
| 		break;
 | |
| #endif
 | |
| #if defined(CONFIG_CMD_ONENAND)
 | |
| 	case MTD_DEV_TYPE_ONENAND:
 | |
| 		return get_node_mem_onenand(off, ext_buf);
 | |
| 		break;
 | |
| #endif
 | |
| 	default:
 | |
| 		printf("get_fl_mem: unknown device type, " \
 | |
| 			"using raw offset!\n");
 | |
| 	}
 | |
| 	return (void*)off;
 | |
| }
 | |
| 
 | |
| static inline void put_fl_mem(void *buf, void *ext_buf)
 | |
| {
 | |
| 	struct mtdids *id = current_part->dev->id;
 | |
| 
 | |
| 	/* If buf is the same as ext_buf, it was provided by the caller -
 | |
| 	   we shouldn't free it then. */
 | |
| 	if (buf == ext_buf)
 | |
| 		return;
 | |
| 	switch (id->type) {
 | |
| #if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
 | |
| 	case MTD_DEV_TYPE_NAND:
 | |
| 		return put_fl_mem_nand(buf);
 | |
| #endif
 | |
| #if defined(CONFIG_CMD_ONENAND)
 | |
| 	case MTD_DEV_TYPE_ONENAND:
 | |
| 		return put_fl_mem_onenand(buf);
 | |
| #endif
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* Compression names */
 | |
| static char *compr_names[] = {
 | |
| 	"NONE",
 | |
| 	"ZERO",
 | |
| 	"RTIME",
 | |
| 	"RUBINMIPS",
 | |
| 	"COPY",
 | |
| 	"DYNRUBIN",
 | |
| 	"ZLIB",
 | |
| #if defined(CONFIG_JFFS2_LZO)
 | |
| 	"LZO",
 | |
| #endif
 | |
| };
 | |
| 
 | |
| /* Memory management */
 | |
| struct mem_block {
 | |
| 	u32	index;
 | |
| 	struct mem_block *next;
 | |
| 	struct b_node nodes[NODE_CHUNK];
 | |
| };
 | |
| 
 | |
| 
 | |
| static void
 | |
| free_nodes(struct b_list *list)
 | |
| {
 | |
| 	while (list->listMemBase != NULL) {
 | |
| 		struct mem_block *next = list->listMemBase->next;
 | |
| 		free( list->listMemBase );
 | |
| 		list->listMemBase = next;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static struct b_node *
 | |
| add_node(struct b_list *list)
 | |
| {
 | |
| 	u32 index = 0;
 | |
| 	struct mem_block *memBase;
 | |
| 	struct b_node *b;
 | |
| 
 | |
| 	memBase = list->listMemBase;
 | |
| 	if (memBase != NULL)
 | |
| 		index = memBase->index;
 | |
| #if 0
 | |
| 	putLabeledWord("add_node: index = ", index);
 | |
| 	putLabeledWord("add_node: memBase = ", list->listMemBase);
 | |
| #endif
 | |
| 
 | |
| 	if (memBase == NULL || index >= NODE_CHUNK) {
 | |
| 		/* we need more space before we continue */
 | |
| 		memBase = mmalloc(sizeof(struct mem_block));
 | |
| 		if (memBase == NULL) {
 | |
| 			putstr("add_node: malloc failed\n");
 | |
| 			return NULL;
 | |
| 		}
 | |
| 		memBase->next = list->listMemBase;
 | |
| 		index = 0;
 | |
| #if 0
 | |
| 		putLabeledWord("add_node: alloced a new membase at ", *memBase);
 | |
| #endif
 | |
| 
 | |
| 	}
 | |
| 	/* now we have room to add it. */
 | |
| 	b = &memBase->nodes[index];
 | |
| 	index ++;
 | |
| 
 | |
| 	memBase->index = index;
 | |
| 	list->listMemBase = memBase;
 | |
| 	list->listCount++;
 | |
| 	return b;
 | |
| }
 | |
| 
 | |
| static struct b_node *
 | |
| insert_node(struct b_list *list, u32 offset)
 | |
| {
 | |
| 	struct b_node *new;
 | |
| 
 | |
| 	if (!(new = add_node(list))) {
 | |
| 		putstr("add_node failed!\r\n");
 | |
| 		return NULL;
 | |
| 	}
 | |
| 	new->offset = offset;
 | |
| 	new->next = NULL;
 | |
| 
 | |
| 	if (list->listTail != NULL)
 | |
| 		list->listTail->next = new;
 | |
| 	else
 | |
| 		list->listHead = new;
 | |
| 	list->listTail = new;
 | |
| 
 | |
| 	return new;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 | |
| /* Sort data entries with the latest version last, so that if there
 | |
|  * is overlapping data the latest version will be used.
 | |
|  */
 | |
| static int compare_inodes(struct b_node *new, struct b_node *old)
 | |
| {
 | |
| 	/*
 | |
| 	 * Only read in the version info from flash, not the entire inode.
 | |
| 	 * This can make a big difference to speed if flash is slow.
 | |
| 	 */
 | |
| 	u32 new_version;
 | |
| 	u32 old_version;
 | |
| 	get_fl_mem(new->offset + offsetof(struct jffs2_raw_inode, version),
 | |
| 		   sizeof(new_version), &new_version);
 | |
| 	get_fl_mem(old->offset + offsetof(struct jffs2_raw_inode, version),
 | |
| 		   sizeof(old_version), &old_version);
 | |
| 
 | |
| 	return new_version > old_version;
 | |
| }
 | |
| 
 | |
| /* Sort directory entries so all entries in the same directory
 | |
|  * with the same name are grouped together, with the latest version
 | |
|  * last. This makes it easy to eliminate all but the latest version
 | |
|  * by marking the previous version dead by setting the inode to 0.
 | |
|  */
 | |
| static int compare_dirents(struct b_node *new, struct b_node *old)
 | |
| {
 | |
| 	/*
 | |
| 	 * Using NULL as the buffer for NOR flash prevents the entire node
 | |
| 	 * being read. This makes most comparisons much quicker as only one
 | |
| 	 * or two entries from the node will be used most of the time.
 | |
| 	 */
 | |
| 	struct jffs2_raw_dirent *jNew = get_node_mem(new->offset, NULL);
 | |
| 	struct jffs2_raw_dirent *jOld = get_node_mem(old->offset, NULL);
 | |
| 	int cmp;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (jNew->pino != jOld->pino) {
 | |
| 		/* ascending sort by pino */
 | |
| 		ret = jNew->pino > jOld->pino;
 | |
| 	} else if (jNew->nsize != jOld->nsize) {
 | |
| 		/*
 | |
| 		 * pino is the same, so use ascending sort by nsize,
 | |
| 		 * so we don't do strncmp unless we really must.
 | |
| 		 */
 | |
| 		ret = jNew->nsize > jOld->nsize;
 | |
| 	} else {
 | |
| 		/*
 | |
| 		 * length is also the same, so use ascending sort by name
 | |
| 		 */
 | |
| 		cmp = strncmp((char *)jNew->name, (char *)jOld->name,
 | |
| 			jNew->nsize);
 | |
| 		if (cmp != 0) {
 | |
| 			ret = cmp > 0;
 | |
| 		} else {
 | |
| 			/*
 | |
| 			 * we have duplicate names in this directory,
 | |
| 			 * so use ascending sort by version
 | |
| 			 */
 | |
| 			ret = jNew->version > jOld->version;
 | |
| 		}
 | |
| 	}
 | |
| 	put_fl_mem(jNew, NULL);
 | |
| 	put_fl_mem(jOld, NULL);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| void
 | |
| jffs2_free_cache(struct part_info *part)
 | |
| {
 | |
| 	struct b_lists *pL;
 | |
| 
 | |
| 	if (part->jffs2_priv != NULL) {
 | |
| 		pL = (struct b_lists *)part->jffs2_priv;
 | |
| 		free_nodes(&pL->frag);
 | |
| 		free_nodes(&pL->dir);
 | |
| 		free(pL->readbuf);
 | |
| 		free(pL);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static u32
 | |
| jffs_init_1pass_list(struct part_info *part)
 | |
| {
 | |
| 	struct b_lists *pL;
 | |
| 
 | |
| 	jffs2_free_cache(part);
 | |
| 
 | |
| 	if (NULL != (part->jffs2_priv = malloc(sizeof(struct b_lists)))) {
 | |
| 		pL = (struct b_lists *)part->jffs2_priv;
 | |
| 
 | |
| 		memset(pL, 0, sizeof(*pL));
 | |
| #ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 | |
| 		pL->dir.listCompare = compare_dirents;
 | |
| 		pL->frag.listCompare = compare_inodes;
 | |
| #endif
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* find the inode from the slashless name given a parent */
 | |
| static long
 | |
| jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 | |
| {
 | |
| 	struct b_node *b;
 | |
| 	struct jffs2_raw_inode *jNode;
 | |
| 	u32 totalSize = 0;
 | |
| 	u32 latestVersion = 0;
 | |
| 	uchar *lDest;
 | |
| 	uchar *src;
 | |
| 	int i;
 | |
| 	u32 counter = 0;
 | |
| #ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 | |
| 	/* Find file size before loading any data, so fragments that
 | |
| 	 * start past the end of file can be ignored. A fragment
 | |
| 	 * that is partially in the file is loaded, so extra data may
 | |
| 	 * be loaded up to the next 4K boundary above the file size.
 | |
| 	 * This shouldn't cause trouble when loading kernel images, so
 | |
| 	 * we will live with it.
 | |
| 	 */
 | |
| 	for (b = pL->frag.listHead; b != NULL; b = b->next) {
 | |
| 		jNode = (struct jffs2_raw_inode *) get_fl_mem(b->offset,
 | |
| 			sizeof(struct jffs2_raw_inode), pL->readbuf);
 | |
| 		if ((inode == jNode->ino)) {
 | |
| 			/* get actual file length from the newest node */
 | |
| 			if (jNode->version >= latestVersion) {
 | |
| 				totalSize = jNode->isize;
 | |
| 				latestVersion = jNode->version;
 | |
| 			}
 | |
| 		}
 | |
| 		put_fl_mem(jNode, pL->readbuf);
 | |
| 	}
 | |
| 	/*
 | |
| 	 * If no destination is provided, we are done.
 | |
| 	 * Just return the total size.
 | |
| 	 */
 | |
| 	if (!dest)
 | |
| 		return totalSize;
 | |
| #endif
 | |
| 
 | |
| 	for (b = pL->frag.listHead; b != NULL; b = b->next) {
 | |
| 		/*
 | |
| 		 * Copy just the node and not the data at this point,
 | |
| 		 * since we don't yet know if we need this data.
 | |
| 		 */
 | |
| 		jNode = (struct jffs2_raw_inode *)get_fl_mem(b->offset,
 | |
| 				sizeof(struct jffs2_raw_inode),
 | |
| 				pL->readbuf);
 | |
| 		if (inode == jNode->ino) {
 | |
| #if 0
 | |
| 			putLabeledWord("\r\n\r\nread_inode: totlen = ", jNode->totlen);
 | |
| 			putLabeledWord("read_inode: inode = ", jNode->ino);
 | |
| 			putLabeledWord("read_inode: version = ", jNode->version);
 | |
| 			putLabeledWord("read_inode: isize = ", jNode->isize);
 | |
| 			putLabeledWord("read_inode: offset = ", jNode->offset);
 | |
| 			putLabeledWord("read_inode: csize = ", jNode->csize);
 | |
| 			putLabeledWord("read_inode: dsize = ", jNode->dsize);
 | |
| 			putLabeledWord("read_inode: compr = ", jNode->compr);
 | |
| 			putLabeledWord("read_inode: usercompr = ", jNode->usercompr);
 | |
| 			putLabeledWord("read_inode: flags = ", jNode->flags);
 | |
| #endif
 | |
| 
 | |
| #ifndef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 | |
| 			/* get actual file length from the newest node */
 | |
| 			if (jNode->version >= latestVersion) {
 | |
| 				totalSize = jNode->isize;
 | |
| 				latestVersion = jNode->version;
 | |
| 			}
 | |
| #endif
 | |
| 
 | |
| 			if(dest) {
 | |
| 				/*
 | |
| 				 * Now that the inode has been checked,
 | |
| 				 * read the entire inode, including data.
 | |
| 				 */
 | |
| 				put_fl_mem(jNode, pL->readbuf);
 | |
| 				jNode = (struct jffs2_raw_inode *)
 | |
| 					get_node_mem(b->offset, pL->readbuf);
 | |
| 				src = ((uchar *)jNode) +
 | |
| 					sizeof(struct jffs2_raw_inode);
 | |
| 				/* ignore data behind latest known EOF */
 | |
| 				if (jNode->offset > totalSize) {
 | |
| 					put_fl_mem(jNode, pL->readbuf);
 | |
| 					continue;
 | |
| 				}
 | |
| 				if (b->datacrc == CRC_UNKNOWN)
 | |
| 					b->datacrc = data_crc(jNode) ?
 | |
| 						CRC_OK : CRC_BAD;
 | |
| 				if (b->datacrc == CRC_BAD) {
 | |
| 					put_fl_mem(jNode, pL->readbuf);
 | |
| 					continue;
 | |
| 				}
 | |
| 
 | |
| 				lDest = (uchar *) (dest + jNode->offset);
 | |
| #if 0
 | |
| 				putLabeledWord("read_inode: src = ", src);
 | |
| 				putLabeledWord("read_inode: dest = ", lDest);
 | |
| #endif
 | |
| 				switch (jNode->compr) {
 | |
| 				case JFFS2_COMPR_NONE:
 | |
| 					ldr_memcpy(lDest, src, jNode->dsize);
 | |
| 					break;
 | |
| 				case JFFS2_COMPR_ZERO:
 | |
| 					for (i = 0; i < jNode->dsize; i++)
 | |
| 						*(lDest++) = 0;
 | |
| 					break;
 | |
| 				case JFFS2_COMPR_RTIME:
 | |
| 					rtime_decompress(src, lDest, jNode->csize, jNode->dsize);
 | |
| 					break;
 | |
| 				case JFFS2_COMPR_DYNRUBIN:
 | |
| 					/* this is slow but it works */
 | |
| 					dynrubin_decompress(src, lDest, jNode->csize, jNode->dsize);
 | |
| 					break;
 | |
| 				case JFFS2_COMPR_ZLIB:
 | |
| 					zlib_decompress(src, lDest, jNode->csize, jNode->dsize);
 | |
| 					break;
 | |
| #if defined(CONFIG_JFFS2_LZO)
 | |
| 				case JFFS2_COMPR_LZO:
 | |
| 					lzo_decompress(src, lDest, jNode->csize, jNode->dsize);
 | |
| 					break;
 | |
| #endif
 | |
| 				default:
 | |
| 					/* unknown */
 | |
| 					putLabeledWord("UNKNOWN COMPRESSION METHOD = ", jNode->compr);
 | |
| 					put_fl_mem(jNode, pL->readbuf);
 | |
| 					return -1;
 | |
| 					break;
 | |
| 				}
 | |
| 			}
 | |
| 
 | |
| #if 0
 | |
| 			putLabeledWord("read_inode: totalSize = ", totalSize);
 | |
| #endif
 | |
| 		}
 | |
| 		counter++;
 | |
| 		put_fl_mem(jNode, pL->readbuf);
 | |
| 	}
 | |
| 
 | |
| #if 0
 | |
| 	putLabeledWord("read_inode: returning = ", totalSize);
 | |
| #endif
 | |
| 	return totalSize;
 | |
| }
 | |
| 
 | |
| /* find the inode from the slashless name given a parent */
 | |
| static u32
 | |
| jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
 | |
| {
 | |
| 	struct b_node *b;
 | |
| 	struct jffs2_raw_dirent *jDir;
 | |
| 	int len;
 | |
| 	u32 counter;
 | |
| 	u32 version = 0;
 | |
| 	u32 inode = 0;
 | |
| 
 | |
| 	/* name is assumed slash free */
 | |
| 	len = strlen(name);
 | |
| 
 | |
| 	counter = 0;
 | |
| 	/* we need to search all and return the inode with the highest version */
 | |
| 	for(b = pL->dir.listHead; b; b = b->next, counter++) {
 | |
| 		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
 | |
| 								pL->readbuf);
 | |
| 		if ((pino == jDir->pino) && (len == jDir->nsize) &&
 | |
| 		    (!strncmp((char *)jDir->name, name, len))) {	/* a match */
 | |
| 			if (jDir->version < version) {
 | |
| 				put_fl_mem(jDir, pL->readbuf);
 | |
| 				continue;
 | |
| 			}
 | |
| 
 | |
| 			if (jDir->version == version && inode != 0) {
 | |
| 				/* I'm pretty sure this isn't legal */
 | |
| 				putstr(" ** ERROR ** ");
 | |
| 				putnstr(jDir->name, jDir->nsize);
 | |
| 				putLabeledWord(" has dup version =", version);
 | |
| 			}
 | |
| 			inode = jDir->ino;
 | |
| 			version = jDir->version;
 | |
| 		}
 | |
| #if 0
 | |
| 		putstr("\r\nfind_inode:p&l ->");
 | |
| 		putnstr(jDir->name, jDir->nsize);
 | |
| 		putstr("\r\n");
 | |
| 		putLabeledWord("pino = ", jDir->pino);
 | |
| 		putLabeledWord("nsize = ", jDir->nsize);
 | |
| 		putLabeledWord("b = ", (u32) b);
 | |
| 		putLabeledWord("counter = ", counter);
 | |
| #endif
 | |
| 		put_fl_mem(jDir, pL->readbuf);
 | |
| 	}
 | |
| 	return inode;
 | |
| }
 | |
| 
 | |
| char *mkmodestr(unsigned long mode, char *str)
 | |
| {
 | |
| 	static const char *l = "xwr";
 | |
| 	int mask = 1, i;
 | |
| 	char c;
 | |
| 
 | |
| 	switch (mode & S_IFMT) {
 | |
| 		case S_IFDIR:    str[0] = 'd'; break;
 | |
| 		case S_IFBLK:    str[0] = 'b'; break;
 | |
| 		case S_IFCHR:    str[0] = 'c'; break;
 | |
| 		case S_IFIFO:    str[0] = 'f'; break;
 | |
| 		case S_IFLNK:    str[0] = 'l'; break;
 | |
| 		case S_IFSOCK:   str[0] = 's'; break;
 | |
| 		case S_IFREG:    str[0] = '-'; break;
 | |
| 		default:         str[0] = '?';
 | |
| 	}
 | |
| 
 | |
| 	for(i = 0; i < 9; i++) {
 | |
| 		c = l[i%3];
 | |
| 		str[9-i] = (mode & mask)?c:'-';
 | |
| 		mask = mask<<1;
 | |
| 	}
 | |
| 
 | |
| 	if(mode & S_ISUID) str[3] = (mode & S_IXUSR)?'s':'S';
 | |
| 	if(mode & S_ISGID) str[6] = (mode & S_IXGRP)?'s':'S';
 | |
| 	if(mode & S_ISVTX) str[9] = (mode & S_IXOTH)?'t':'T';
 | |
| 	str[10] = '\0';
 | |
| 	return str;
 | |
| }
 | |
| 
 | |
| static inline void dump_stat(struct stat *st, const char *name)
 | |
| {
 | |
| 	char str[20];
 | |
| 	char s[64], *p;
 | |
| 
 | |
| 	if (st->st_mtime == (time_t)(-1)) /* some ctimes really hate -1 */
 | |
| 		st->st_mtime = 1;
 | |
| 
 | |
| 	ctime_r((time_t *)&st->st_mtime, s/*,64*/); /* newlib ctime doesn't have buflen */
 | |
| 
 | |
| 	if ((p = strchr(s,'\n')) != NULL) *p = '\0';
 | |
| 	if ((p = strchr(s,'\r')) != NULL) *p = '\0';
 | |
| 
 | |
| /*
 | |
| 	printf("%6lo %s %8ld %s %s\n", st->st_mode, mkmodestr(st->st_mode, str),
 | |
| 		st->st_size, s, name);
 | |
| */
 | |
| 
 | |
| 	printf(" %s %8ld %s %s", mkmodestr(st->st_mode,str), st->st_size, s, name);
 | |
| }
 | |
| 
 | |
| static inline u32 dump_inode(struct b_lists * pL, struct jffs2_raw_dirent *d, struct jffs2_raw_inode *i)
 | |
| {
 | |
| 	char fname[256];
 | |
| 	struct stat st;
 | |
| 
 | |
| 	if(!d || !i) return -1;
 | |
| 
 | |
| 	strncpy(fname, (char *)d->name, d->nsize);
 | |
| 	fname[d->nsize] = '\0';
 | |
| 
 | |
| 	memset(&st,0,sizeof(st));
 | |
| 
 | |
| 	st.st_mtime = i->mtime;
 | |
| 	st.st_mode = i->mode;
 | |
| 	st.st_ino = i->ino;
 | |
| 	st.st_size = i->isize;
 | |
| 
 | |
| 	dump_stat(&st, fname);
 | |
| 
 | |
| 	if (d->type == DT_LNK) {
 | |
| 		unsigned char *src = (unsigned char *) (&i[1]);
 | |
| 	        putstr(" -> ");
 | |
| 		putnstr(src, (int)i->dsize);
 | |
| 	}
 | |
| 
 | |
| 	putstr("\r\n");
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* list inodes with the given pino */
 | |
| static u32
 | |
| jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino)
 | |
| {
 | |
| 	struct b_node *b;
 | |
| 	struct jffs2_raw_dirent *jDir;
 | |
| 
 | |
| 	for (b = pL->dir.listHead; b; b = b->next) {
 | |
| 		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
 | |
| 								pL->readbuf);
 | |
| 		if (pino == jDir->pino) {
 | |
| 			u32 i_version = 0;
 | |
| 			struct jffs2_raw_inode *jNode, *i = NULL;
 | |
| 			struct b_node *b2;
 | |
| 
 | |
| #ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 | |
| 			/* Check for more recent versions of this file */
 | |
| 			int match;
 | |
| 			do {
 | |
| 				struct b_node *next = b->next;
 | |
| 				struct jffs2_raw_dirent *jDirNext;
 | |
| 				if (!next)
 | |
| 					break;
 | |
| 				jDirNext = (struct jffs2_raw_dirent *)
 | |
| 					get_node_mem(next->offset, NULL);
 | |
| 				match = jDirNext->pino == jDir->pino &&
 | |
| 					jDirNext->nsize == jDir->nsize &&
 | |
| 					strncmp((char *)jDirNext->name,
 | |
| 						(char *)jDir->name,
 | |
| 						jDir->nsize) == 0;
 | |
| 				if (match) {
 | |
| 					/* Use next. It is more recent */
 | |
| 					b = next;
 | |
| 					/* Update buffer with the new info */
 | |
| 					*jDir = *jDirNext;
 | |
| 				}
 | |
| 				put_fl_mem(jDirNext, NULL);
 | |
| 			} while (match);
 | |
| #endif
 | |
| 			if (jDir->ino == 0) {
 | |
| 				/* Deleted file */
 | |
| 				put_fl_mem(jDir, pL->readbuf);
 | |
| 				continue;
 | |
| 			}
 | |
| 
 | |
| 			for (b2 = pL->frag.listHead; b2; b2 = b2->next) {
 | |
| 				jNode = (struct jffs2_raw_inode *)
 | |
| 					get_fl_mem(b2->offset, sizeof(*jNode),
 | |
| 						   NULL);
 | |
| 				if (jNode->ino == jDir->ino &&
 | |
| 				    jNode->version >= i_version) {
 | |
| 					i_version = jNode->version;
 | |
| 					if (i)
 | |
| 						put_fl_mem(i, NULL);
 | |
| 
 | |
| 					if (jDir->type == DT_LNK)
 | |
| 						i = get_node_mem(b2->offset,
 | |
| 								 NULL);
 | |
| 					else
 | |
| 						i = get_fl_mem(b2->offset,
 | |
| 							       sizeof(*i),
 | |
| 							       NULL);
 | |
| 				}
 | |
| 				put_fl_mem(jNode, NULL);
 | |
| 			}
 | |
| 
 | |
| 			dump_inode(pL, jDir, i);
 | |
| 			put_fl_mem(i, NULL);
 | |
| 		}
 | |
| 		put_fl_mem(jDir, pL->readbuf);
 | |
| 	}
 | |
| 	return pino;
 | |
| }
 | |
| 
 | |
| static u32
 | |
| jffs2_1pass_search_inode(struct b_lists * pL, const char *fname, u32 pino)
 | |
| {
 | |
| 	int i;
 | |
| 	char tmp[256];
 | |
| 	char working_tmp[256];
 | |
| 	char *c;
 | |
| 
 | |
| 	/* discard any leading slash */
 | |
| 	i = 0;
 | |
| 	while (fname[i] == '/')
 | |
| 		i++;
 | |
| 	strcpy(tmp, &fname[i]);
 | |
| 
 | |
| 	while ((c = (char *) strchr(tmp, '/')))	/* we are still dired searching */
 | |
| 	{
 | |
| 		strncpy(working_tmp, tmp, c - tmp);
 | |
| 		working_tmp[c - tmp] = '\0';
 | |
| #if 0
 | |
| 		putstr("search_inode: tmp = ");
 | |
| 		putstr(tmp);
 | |
| 		putstr("\r\n");
 | |
| 		putstr("search_inode: wtmp = ");
 | |
| 		putstr(working_tmp);
 | |
| 		putstr("\r\n");
 | |
| 		putstr("search_inode: c = ");
 | |
| 		putstr(c);
 | |
| 		putstr("\r\n");
 | |
| #endif
 | |
| 		for (i = 0; i < strlen(c) - 1; i++)
 | |
| 			tmp[i] = c[i + 1];
 | |
| 		tmp[i] = '\0';
 | |
| #if 0
 | |
| 		putstr("search_inode: post tmp = ");
 | |
| 		putstr(tmp);
 | |
| 		putstr("\r\n");
 | |
| #endif
 | |
| 
 | |
| 		if (!(pino = jffs2_1pass_find_inode(pL, working_tmp, pino))) {
 | |
| 			putstr("find_inode failed for name=");
 | |
| 			putstr(working_tmp);
 | |
| 			putstr("\r\n");
 | |
| 			return 0;
 | |
| 		}
 | |
| 	}
 | |
| 	/* this is for the bare filename, directories have already been mapped */
 | |
| 	if (!(pino = jffs2_1pass_find_inode(pL, tmp, pino))) {
 | |
| 		putstr("find_inode failed for name=");
 | |
| 		putstr(tmp);
 | |
| 		putstr("\r\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 	return pino;
 | |
| 
 | |
| }
 | |
| 
 | |
| static u32
 | |
| jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 | |
| {
 | |
| 	struct b_node *b;
 | |
| 	struct b_node *b2;
 | |
| 	struct jffs2_raw_dirent *jDir;
 | |
| 	struct jffs2_raw_inode *jNode;
 | |
| 	u8 jDirFoundType = 0;
 | |
| 	u32 jDirFoundIno = 0;
 | |
| 	u32 jDirFoundPino = 0;
 | |
| 	char tmp[256];
 | |
| 	u32 version = 0;
 | |
| 	u32 pino;
 | |
| 	unsigned char *src;
 | |
| 
 | |
| 	/* we need to search all and return the inode with the highest version */
 | |
| 	for(b = pL->dir.listHead; b; b = b->next) {
 | |
| 		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
 | |
| 								pL->readbuf);
 | |
| 		if (ino == jDir->ino) {
 | |
| 			if (jDir->version < version) {
 | |
| 				put_fl_mem(jDir, pL->readbuf);
 | |
| 				continue;
 | |
| 			}
 | |
| 
 | |
| 			if (jDir->version == version && jDirFoundType) {
 | |
| 				/* I'm pretty sure this isn't legal */
 | |
| 				putstr(" ** ERROR ** ");
 | |
| 				putnstr(jDir->name, jDir->nsize);
 | |
| 				putLabeledWord(" has dup version (resolve) = ",
 | |
| 					version);
 | |
| 			}
 | |
| 
 | |
| 			jDirFoundType = jDir->type;
 | |
| 			jDirFoundIno = jDir->ino;
 | |
| 			jDirFoundPino = jDir->pino;
 | |
| 			version = jDir->version;
 | |
| 		}
 | |
| 		put_fl_mem(jDir, pL->readbuf);
 | |
| 	}
 | |
| 	/* now we found the right entry again. (shoulda returned inode*) */
 | |
| 	if (jDirFoundType != DT_LNK)
 | |
| 		return jDirFoundIno;
 | |
| 
 | |
| 	/* it's a soft link so we follow it again. */
 | |
| 	b2 = pL->frag.listHead;
 | |
| 	while (b2) {
 | |
| 		jNode = (struct jffs2_raw_inode *) get_node_mem(b2->offset,
 | |
| 								pL->readbuf);
 | |
| 		if (jNode->ino == jDirFoundIno) {
 | |
| 			src = (unsigned char *)jNode + sizeof(struct jffs2_raw_inode);
 | |
| 
 | |
| #if 0
 | |
| 			putLabeledWord("\t\t dsize = ", jNode->dsize);
 | |
| 			putstr("\t\t target = ");
 | |
| 			putnstr(src, jNode->dsize);
 | |
| 			putstr("\r\n");
 | |
| #endif
 | |
| 			strncpy(tmp, (char *)src, jNode->dsize);
 | |
| 			tmp[jNode->dsize] = '\0';
 | |
| 			put_fl_mem(jNode, pL->readbuf);
 | |
| 			break;
 | |
| 		}
 | |
| 		b2 = b2->next;
 | |
| 		put_fl_mem(jNode, pL->readbuf);
 | |
| 	}
 | |
| 	/* ok so the name of the new file to find is in tmp */
 | |
| 	/* if it starts with a slash it is root based else shared dirs */
 | |
| 	if (tmp[0] == '/')
 | |
| 		pino = 1;
 | |
| 	else
 | |
| 		pino = jDirFoundPino;
 | |
| 
 | |
| 	return jffs2_1pass_search_inode(pL, tmp, pino);
 | |
| }
 | |
| 
 | |
| static u32
 | |
| jffs2_1pass_search_list_inodes(struct b_lists * pL, const char *fname, u32 pino)
 | |
| {
 | |
| 	int i;
 | |
| 	char tmp[256];
 | |
| 	char working_tmp[256];
 | |
| 	char *c;
 | |
| 
 | |
| 	/* discard any leading slash */
 | |
| 	i = 0;
 | |
| 	while (fname[i] == '/')
 | |
| 		i++;
 | |
| 	strcpy(tmp, &fname[i]);
 | |
| 	working_tmp[0] = '\0';
 | |
| 	while ((c = (char *) strchr(tmp, '/')))	/* we are still dired searching */
 | |
| 	{
 | |
| 		strncpy(working_tmp, tmp, c - tmp);
 | |
| 		working_tmp[c - tmp] = '\0';
 | |
| 		for (i = 0; i < strlen(c) - 1; i++)
 | |
| 			tmp[i] = c[i + 1];
 | |
| 		tmp[i] = '\0';
 | |
| 		/* only a failure if we arent looking at top level */
 | |
| 		if (!(pino = jffs2_1pass_find_inode(pL, working_tmp, pino)) &&
 | |
| 		    (working_tmp[0])) {
 | |
| 			putstr("find_inode failed for name=");
 | |
| 			putstr(working_tmp);
 | |
| 			putstr("\r\n");
 | |
| 			return 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (tmp[0] && !(pino = jffs2_1pass_find_inode(pL, tmp, pino))) {
 | |
| 		putstr("find_inode failed for name=");
 | |
| 		putstr(tmp);
 | |
| 		putstr("\r\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 	/* this is for the bare filename, directories have already been mapped */
 | |
| 	if (!(pino = jffs2_1pass_list_inodes(pL, pino))) {
 | |
| 		putstr("find_inode failed for name=");
 | |
| 		putstr(tmp);
 | |
| 		putstr("\r\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 	return pino;
 | |
| 
 | |
| }
 | |
| 
 | |
| unsigned char
 | |
| jffs2_1pass_rescan_needed(struct part_info *part)
 | |
| {
 | |
| 	struct b_node *b;
 | |
| 	struct jffs2_unknown_node onode;
 | |
| 	struct jffs2_unknown_node *node;
 | |
| 	struct b_lists *pL = (struct b_lists *)part->jffs2_priv;
 | |
| 
 | |
| 	if (part->jffs2_priv == 0){
 | |
| 		DEBUGF ("rescan: First time in use\n");
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/* if we have no list, we need to rescan */
 | |
| 	if (pL->frag.listCount == 0) {
 | |
| 		DEBUGF ("rescan: fraglist zero\n");
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	/* but suppose someone reflashed a partition at the same offset... */
 | |
| 	b = pL->dir.listHead;
 | |
| 	while (b) {
 | |
| 		node = (struct jffs2_unknown_node *) get_fl_mem(b->offset,
 | |
| 			sizeof(onode), &onode);
 | |
| 		if (node->nodetype != JFFS2_NODETYPE_DIRENT) {
 | |
| 			DEBUGF ("rescan: fs changed beneath me? (%lx)\n",
 | |
| 					(unsigned long) b->offset);
 | |
| 			return 1;
 | |
| 		}
 | |
| 		b = b->next;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_JFFS2_SUMMARY
 | |
| static u32 sum_get_unaligned32(u32 *ptr)
 | |
| {
 | |
| 	u32 val;
 | |
| 	u8 *p = (u8 *)ptr;
 | |
| 
 | |
| 	val = *p | (*(p + 1) << 8) | (*(p + 2) << 16) | (*(p + 3) << 24);
 | |
| 
 | |
| 	return __le32_to_cpu(val);
 | |
| }
 | |
| 
 | |
| static u16 sum_get_unaligned16(u16 *ptr)
 | |
| {
 | |
| 	u16 val;
 | |
| 	u8 *p = (u8 *)ptr;
 | |
| 
 | |
| 	val = *p | (*(p + 1) << 8);
 | |
| 
 | |
| 	return __le16_to_cpu(val);
 | |
| }
 | |
| 
 | |
| #define dbg_summary(...) do {} while (0);
 | |
| /*
 | |
|  * Process the stored summary information - helper function for
 | |
|  * jffs2_sum_scan_sumnode()
 | |
|  */
 | |
| 
 | |
| static int jffs2_sum_process_sum_data(struct part_info *part, uint32_t offset,
 | |
| 				struct jffs2_raw_summary *summary,
 | |
| 				struct b_lists *pL)
 | |
| {
 | |
| 	void *sp;
 | |
| 	int i, pass;
 | |
| 	void *ret;
 | |
| 
 | |
| 	for (pass = 0; pass < 2; pass++) {
 | |
| 		sp = summary->sum;
 | |
| 
 | |
| 		for (i = 0; i < summary->sum_num; i++) {
 | |
| 			struct jffs2_sum_unknown_flash *spu = sp;
 | |
| 			dbg_summary("processing summary index %d\n", i);
 | |
| 
 | |
| 			switch (sum_get_unaligned16(&spu->nodetype)) {
 | |
| 				case JFFS2_NODETYPE_INODE: {
 | |
| 				struct jffs2_sum_inode_flash *spi;
 | |
| 					if (pass) {
 | |
| 						spi = sp;
 | |
| 
 | |
| 						ret = insert_node(&pL->frag,
 | |
| 							(u32)part->offset +
 | |
| 							offset +
 | |
| 							sum_get_unaligned32(
 | |
| 								&spi->offset));
 | |
| 						if (ret == NULL)
 | |
| 							return -1;
 | |
| 					}
 | |
| 
 | |
| 					sp += JFFS2_SUMMARY_INODE_SIZE;
 | |
| 
 | |
| 					break;
 | |
| 				}
 | |
| 				case JFFS2_NODETYPE_DIRENT: {
 | |
| 					struct jffs2_sum_dirent_flash *spd;
 | |
| 					spd = sp;
 | |
| 					if (pass) {
 | |
| 						ret = insert_node(&pL->dir,
 | |
| 							(u32) part->offset +
 | |
| 							offset +
 | |
| 							sum_get_unaligned32(
 | |
| 								&spd->offset));
 | |
| 						if (ret == NULL)
 | |
| 							return -1;
 | |
| 					}
 | |
| 
 | |
| 					sp += JFFS2_SUMMARY_DIRENT_SIZE(
 | |
| 							spd->nsize);
 | |
| 
 | |
| 					break;
 | |
| 				}
 | |
| 				default : {
 | |
| 					uint16_t nodetype = sum_get_unaligned16(
 | |
| 								&spu->nodetype);
 | |
| 					printf("Unsupported node type %x found"
 | |
| 							" in summary!\n",
 | |
| 							nodetype);
 | |
| 					if ((nodetype & JFFS2_COMPAT_MASK) ==
 | |
| 							JFFS2_FEATURE_INCOMPAT)
 | |
| 						return -EIO;
 | |
| 					return -EBADMSG;
 | |
| 				}
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Process the summary node - called from jffs2_scan_eraseblock() */
 | |
| int jffs2_sum_scan_sumnode(struct part_info *part, uint32_t offset,
 | |
| 			   struct jffs2_raw_summary *summary, uint32_t sumsize,
 | |
| 			   struct b_lists *pL)
 | |
| {
 | |
| 	struct jffs2_unknown_node crcnode;
 | |
| 	int ret, __maybe_unused ofs;
 | |
| 	uint32_t crc;
 | |
| 
 | |
| 	ofs = part->sector_size - sumsize;
 | |
| 
 | |
| 	dbg_summary("summary found for 0x%08x at 0x%08x (0x%x bytes)\n",
 | |
| 		    offset, offset + ofs, sumsize);
 | |
| 
 | |
| 	/* OK, now check for node validity and CRC */
 | |
| 	crcnode.magic = JFFS2_MAGIC_BITMASK;
 | |
| 	crcnode.nodetype = JFFS2_NODETYPE_SUMMARY;
 | |
| 	crcnode.totlen = summary->totlen;
 | |
| 	crc = crc32_no_comp(0, (uchar *)&crcnode, sizeof(crcnode)-4);
 | |
| 
 | |
| 	if (summary->hdr_crc != crc) {
 | |
| 		dbg_summary("Summary node header is corrupt (bad CRC or "
 | |
| 				"no summary at all)\n");
 | |
| 		goto crc_err;
 | |
| 	}
 | |
| 
 | |
| 	if (summary->totlen != sumsize) {
 | |
| 		dbg_summary("Summary node is corrupt (wrong erasesize?)\n");
 | |
| 		goto crc_err;
 | |
| 	}
 | |
| 
 | |
| 	crc = crc32_no_comp(0, (uchar *)summary,
 | |
| 			sizeof(struct jffs2_raw_summary)-8);
 | |
| 
 | |
| 	if (summary->node_crc != crc) {
 | |
| 		dbg_summary("Summary node is corrupt (bad CRC)\n");
 | |
| 		goto crc_err;
 | |
| 	}
 | |
| 
 | |
| 	crc = crc32_no_comp(0, (uchar *)summary->sum,
 | |
| 			sumsize - sizeof(struct jffs2_raw_summary));
 | |
| 
 | |
| 	if (summary->sum_crc != crc) {
 | |
| 		dbg_summary("Summary node data is corrupt (bad CRC)\n");
 | |
| 		goto crc_err;
 | |
| 	}
 | |
| 
 | |
| 	if (summary->cln_mkr)
 | |
| 		dbg_summary("Summary : CLEANMARKER node \n");
 | |
| 
 | |
| 	ret = jffs2_sum_process_sum_data(part, offset, summary, pL);
 | |
| 	if (ret == -EBADMSG)
 | |
| 		return 0;
 | |
| 	if (ret)
 | |
| 		return ret;		/* real error */
 | |
| 
 | |
| 	return 1;
 | |
| 
 | |
| crc_err:
 | |
| 	putstr("Summary node crc error, skipping summary information.\n");
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif /* CONFIG_JFFS2_SUMMARY */
 | |
| 
 | |
| #ifdef DEBUG_FRAGMENTS
 | |
| static void
 | |
| dump_fragments(struct b_lists *pL)
 | |
| {
 | |
| 	struct b_node *b;
 | |
| 	struct jffs2_raw_inode ojNode;
 | |
| 	struct jffs2_raw_inode *jNode;
 | |
| 
 | |
| 	putstr("\r\n\r\n******The fragment Entries******\r\n");
 | |
| 	b = pL->frag.listHead;
 | |
| 	while (b) {
 | |
| 		jNode = (struct jffs2_raw_inode *) get_fl_mem(b->offset,
 | |
| 			sizeof(ojNode), &ojNode);
 | |
| 		putLabeledWord("\r\n\tbuild_list: FLASH_OFFSET = ", b->offset);
 | |
| 		putLabeledWord("\tbuild_list: totlen = ", jNode->totlen);
 | |
| 		putLabeledWord("\tbuild_list: inode = ", jNode->ino);
 | |
| 		putLabeledWord("\tbuild_list: version = ", jNode->version);
 | |
| 		putLabeledWord("\tbuild_list: isize = ", jNode->isize);
 | |
| 		putLabeledWord("\tbuild_list: atime = ", jNode->atime);
 | |
| 		putLabeledWord("\tbuild_list: offset = ", jNode->offset);
 | |
| 		putLabeledWord("\tbuild_list: csize = ", jNode->csize);
 | |
| 		putLabeledWord("\tbuild_list: dsize = ", jNode->dsize);
 | |
| 		putLabeledWord("\tbuild_list: compr = ", jNode->compr);
 | |
| 		putLabeledWord("\tbuild_list: usercompr = ", jNode->usercompr);
 | |
| 		putLabeledWord("\tbuild_list: flags = ", jNode->flags);
 | |
| 		putLabeledWord("\tbuild_list: offset = ", b->offset);	/* FIXME: ? [RS] */
 | |
| 		b = b->next;
 | |
| 	}
 | |
| }
 | |
| #endif
 | |
| 
 | |
| #ifdef DEBUG_DIRENTS
 | |
| static void
 | |
| dump_dirents(struct b_lists *pL)
 | |
| {
 | |
| 	struct b_node *b;
 | |
| 	struct jffs2_raw_dirent *jDir;
 | |
| 
 | |
| 	putstr("\r\n\r\n******The directory Entries******\r\n");
 | |
| 	b = pL->dir.listHead;
 | |
| 	while (b) {
 | |
| 		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
 | |
| 								pL->readbuf);
 | |
| 		putstr("\r\n");
 | |
| 		putnstr(jDir->name, jDir->nsize);
 | |
| 		putLabeledWord("\r\n\tbuild_list: magic = ", jDir->magic);
 | |
| 		putLabeledWord("\tbuild_list: nodetype = ", jDir->nodetype);
 | |
| 		putLabeledWord("\tbuild_list: hdr_crc = ", jDir->hdr_crc);
 | |
| 		putLabeledWord("\tbuild_list: pino = ", jDir->pino);
 | |
| 		putLabeledWord("\tbuild_list: version = ", jDir->version);
 | |
| 		putLabeledWord("\tbuild_list: ino = ", jDir->ino);
 | |
| 		putLabeledWord("\tbuild_list: mctime = ", jDir->mctime);
 | |
| 		putLabeledWord("\tbuild_list: nsize = ", jDir->nsize);
 | |
| 		putLabeledWord("\tbuild_list: type = ", jDir->type);
 | |
| 		putLabeledWord("\tbuild_list: node_crc = ", jDir->node_crc);
 | |
| 		putLabeledWord("\tbuild_list: name_crc = ", jDir->name_crc);
 | |
| 		putLabeledWord("\tbuild_list: offset = ", b->offset);	/* FIXME: ? [RS] */
 | |
| 		b = b->next;
 | |
| 		put_fl_mem(jDir, pL->readbuf);
 | |
| 	}
 | |
| }
 | |
| #endif
 | |
| 
 | |
| #define DEFAULT_EMPTY_SCAN_SIZE	256
 | |
| 
 | |
| static inline uint32_t EMPTY_SCAN_SIZE(uint32_t sector_size)
 | |
| {
 | |
| 	if (sector_size < DEFAULT_EMPTY_SCAN_SIZE)
 | |
| 		return sector_size;
 | |
| 	else
 | |
| 		return DEFAULT_EMPTY_SCAN_SIZE;
 | |
| }
 | |
| 
 | |
| static u32
 | |
| jffs2_1pass_build_lists(struct part_info * part)
 | |
| {
 | |
| 	struct b_lists *pL;
 | |
| 	struct jffs2_unknown_node *node;
 | |
| 	u32 nr_sectors;
 | |
| 	u32 i;
 | |
| 	u32 counter4 = 0;
 | |
| 	u32 counterF = 0;
 | |
| 	u32 counterN = 0;
 | |
| 	u32 max_totlen = 0;
 | |
| 	u32 buf_size;
 | |
| 	char *buf;
 | |
| 
 | |
| 	nr_sectors = lldiv(part->size, part->sector_size);
 | |
| 	/* turn off the lcd.  Refreshing the lcd adds 50% overhead to the */
 | |
| 	/* jffs2 list building enterprise nope.  in newer versions the overhead is */
 | |
| 	/* only about 5 %.  not enough to inconvenience people for. */
 | |
| 	/* lcd_off(); */
 | |
| 
 | |
| 	/* if we are building a list we need to refresh the cache. */
 | |
| 	jffs_init_1pass_list(part);
 | |
| 	pL = (struct b_lists *)part->jffs2_priv;
 | |
| 	buf = malloc(DEFAULT_EMPTY_SCAN_SIZE);
 | |
| 	puts ("Scanning JFFS2 FS:   ");
 | |
| 
 | |
| 	/* start at the beginning of the partition */
 | |
| 	for (i = 0; i < nr_sectors; i++) {
 | |
| 		uint32_t sector_ofs = i * part->sector_size;
 | |
| 		uint32_t buf_ofs = sector_ofs;
 | |
| 		uint32_t buf_len;
 | |
| 		uint32_t ofs, prevofs;
 | |
| #ifdef CONFIG_JFFS2_SUMMARY
 | |
| 		struct jffs2_sum_marker *sm;
 | |
| 		void *sumptr = NULL;
 | |
| 		uint32_t sumlen;
 | |
| 		int ret;
 | |
| #endif
 | |
| 		/* Indicates a sector with a CLEANMARKER was found */
 | |
| 		int clean_sector = 0;
 | |
| 
 | |
| 		/* Set buf_size to maximum length */
 | |
| 		buf_size = DEFAULT_EMPTY_SCAN_SIZE;
 | |
| 		WATCHDOG_RESET();
 | |
| 
 | |
| #ifdef CONFIG_JFFS2_SUMMARY
 | |
| 		buf_len = sizeof(*sm);
 | |
| 
 | |
| 		/* Read as much as we want into the _end_ of the preallocated
 | |
| 		 * buffer
 | |
| 		 */
 | |
| 		get_fl_mem(part->offset + sector_ofs + part->sector_size -
 | |
| 				buf_len, buf_len, buf + buf_size - buf_len);
 | |
| 
 | |
| 		sm = (void *)buf + buf_size - sizeof(*sm);
 | |
| 		if (sm->magic == JFFS2_SUM_MAGIC) {
 | |
| 			sumlen = part->sector_size - sm->offset;
 | |
| 			sumptr = buf + buf_size - sumlen;
 | |
| 
 | |
| 			/* Now, make sure the summary itself is available */
 | |
| 			if (sumlen > buf_size) {
 | |
| 				/* Need to kmalloc for this. */
 | |
| 				sumptr = malloc(sumlen);
 | |
| 				if (!sumptr) {
 | |
| 					putstr("Can't get memory for summary "
 | |
| 							"node!\n");
 | |
| 					free(buf);
 | |
| 					jffs2_free_cache(part);
 | |
| 					return 0;
 | |
| 				}
 | |
| 				memcpy(sumptr + sumlen - buf_len, buf +
 | |
| 						buf_size - buf_len, buf_len);
 | |
| 			}
 | |
| 			if (buf_len < sumlen) {
 | |
| 				/* Need to read more so that the entire summary
 | |
| 				 * node is present
 | |
| 				 */
 | |
| 				get_fl_mem(part->offset + sector_ofs +
 | |
| 						part->sector_size - sumlen,
 | |
| 						sumlen - buf_len, sumptr);
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		if (sumptr) {
 | |
| 			ret = jffs2_sum_scan_sumnode(part, sector_ofs, sumptr,
 | |
| 					sumlen, pL);
 | |
| 
 | |
| 			if (buf_size && sumlen > buf_size)
 | |
| 				free(sumptr);
 | |
| 			if (ret < 0) {
 | |
| 				free(buf);
 | |
| 				jffs2_free_cache(part);
 | |
| 				return 0;
 | |
| 			}
 | |
| 			if (ret)
 | |
| 				continue;
 | |
| 
 | |
| 		}
 | |
| #endif /* CONFIG_JFFS2_SUMMARY */
 | |
| 
 | |
| 		buf_len = EMPTY_SCAN_SIZE(part->sector_size);
 | |
| 
 | |
| 		get_fl_mem((u32)part->offset + buf_ofs, buf_len, buf);
 | |
| 
 | |
| 		/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
 | |
| 		ofs = 0;
 | |
| 
 | |
| 		/* Scan only 4KiB of 0xFF before declaring it's empty */
 | |
| 		while (ofs < EMPTY_SCAN_SIZE(part->sector_size) &&
 | |
| 				*(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF)
 | |
| 			ofs += 4;
 | |
| 
 | |
| 		if (ofs == EMPTY_SCAN_SIZE(part->sector_size))
 | |
| 			continue;
 | |
| 
 | |
| 		ofs += sector_ofs;
 | |
| 		prevofs = ofs - 1;
 | |
| 		/*
 | |
| 		 * Set buf_size down to the minimum size required.
 | |
| 		 * This prevents reading in chunks of flash data unnecessarily.
 | |
| 		 */
 | |
| 		buf_size = sizeof(union jffs2_node_union);
 | |
| 
 | |
| 	scan_more:
 | |
| 		while (ofs < sector_ofs + part->sector_size) {
 | |
| 			if (ofs == prevofs) {
 | |
| 				printf("offset %08x already seen, skip\n", ofs);
 | |
| 				ofs += 4;
 | |
| 				counter4++;
 | |
| 				continue;
 | |
| 			}
 | |
| 			prevofs = ofs;
 | |
| 			if (sector_ofs + part->sector_size <
 | |
| 					ofs + sizeof(*node))
 | |
| 				break;
 | |
| 			if (buf_ofs + buf_len < ofs + sizeof(*node)) {
 | |
| 				buf_len = min_t(uint32_t, buf_size, sector_ofs
 | |
| 						+ part->sector_size - ofs);
 | |
| 				get_fl_mem((u32)part->offset + ofs, buf_len,
 | |
| 					   buf);
 | |
| 				buf_ofs = ofs;
 | |
| 			}
 | |
| 
 | |
| 			node = (struct jffs2_unknown_node *)&buf[ofs-buf_ofs];
 | |
| 
 | |
| 			if (*(uint32_t *)(&buf[ofs-buf_ofs]) == 0xffffffff) {
 | |
| 				uint32_t inbuf_ofs;
 | |
| 				uint32_t scan_end;
 | |
| 
 | |
| 				ofs += 4;
 | |
| 				scan_end = min_t(uint32_t, EMPTY_SCAN_SIZE(
 | |
| 							part->sector_size)/8,
 | |
| 							buf_len);
 | |
| 			more_empty:
 | |
| 				inbuf_ofs = ofs - buf_ofs;
 | |
| 				while (inbuf_ofs < scan_end) {
 | |
| 					if (*(uint32_t *)(&buf[inbuf_ofs]) !=
 | |
| 							0xffffffff)
 | |
| 						goto scan_more;
 | |
| 
 | |
| 					inbuf_ofs += 4;
 | |
| 					ofs += 4;
 | |
| 				}
 | |
| 				/* Ran off end. */
 | |
| 				/*
 | |
| 				 * If this sector had a clean marker at the
 | |
| 				 * beginning, and immediately following this
 | |
| 				 * have been a bunch of FF bytes, treat the
 | |
| 				 * entire sector as empty.
 | |
| 				 */
 | |
| 				if (clean_sector)
 | |
| 					break;
 | |
| 
 | |
| 				/* See how much more there is to read in this
 | |
| 				 * eraseblock...
 | |
| 				 */
 | |
| 				buf_len = min_t(uint32_t, buf_size,
 | |
| 						sector_ofs +
 | |
| 						part->sector_size - ofs);
 | |
| 				if (!buf_len) {
 | |
| 					/* No more to read. Break out of main
 | |
| 					 * loop without marking this range of
 | |
| 					 * empty space as dirty (because it's
 | |
| 					 * not)
 | |
| 					 */
 | |
| 					break;
 | |
| 				}
 | |
| 				scan_end = buf_len;
 | |
| 				get_fl_mem((u32)part->offset + ofs, buf_len,
 | |
| 					   buf);
 | |
| 				buf_ofs = ofs;
 | |
| 				goto more_empty;
 | |
| 			}
 | |
| 			/*
 | |
| 			 * Found something not erased in the sector, so reset
 | |
| 			 * the 'clean_sector' flag.
 | |
| 			 */
 | |
| 			clean_sector = 0;
 | |
| 			if (node->magic != JFFS2_MAGIC_BITMASK ||
 | |
| 					!hdr_crc(node)) {
 | |
| 				ofs += 4;
 | |
| 				counter4++;
 | |
| 				continue;
 | |
| 			}
 | |
| 			if (ofs + node->totlen >
 | |
| 					sector_ofs + part->sector_size) {
 | |
| 				ofs += 4;
 | |
| 				counter4++;
 | |
| 				continue;
 | |
| 			}
 | |
| 			/* if its a fragment add it */
 | |
| 			switch (node->nodetype) {
 | |
| 			case JFFS2_NODETYPE_INODE:
 | |
| 				if (buf_ofs + buf_len < ofs + sizeof(struct
 | |
| 							jffs2_raw_inode)) {
 | |
| 					buf_len = min_t(uint32_t,
 | |
| 							sizeof(struct jffs2_raw_inode),
 | |
| 							sector_ofs +
 | |
| 							part->sector_size -
 | |
| 							ofs);
 | |
| 					get_fl_mem((u32)part->offset + ofs,
 | |
| 						   buf_len, buf);
 | |
| 					buf_ofs = ofs;
 | |
| 					node = (void *)buf;
 | |
| 				}
 | |
| 				if (!inode_crc((struct jffs2_raw_inode *)node))
 | |
| 					break;
 | |
| 
 | |
| 				if (insert_node(&pL->frag, (u32) part->offset +
 | |
| 						ofs) == NULL) {
 | |
| 					free(buf);
 | |
| 					jffs2_free_cache(part);
 | |
| 					return 0;
 | |
| 				}
 | |
| 				if (max_totlen < node->totlen)
 | |
| 					max_totlen = node->totlen;
 | |
| 				break;
 | |
| 			case JFFS2_NODETYPE_DIRENT:
 | |
| 				if (buf_ofs + buf_len < ofs + sizeof(struct
 | |
| 							jffs2_raw_dirent) +
 | |
| 							((struct
 | |
| 							 jffs2_raw_dirent *)
 | |
| 							node)->nsize) {
 | |
| 					buf_len = min_t(uint32_t,
 | |
| 							node->totlen,
 | |
| 							sector_ofs +
 | |
| 							part->sector_size -
 | |
| 							ofs);
 | |
| 					get_fl_mem((u32)part->offset + ofs,
 | |
| 						   buf_len, buf);
 | |
| 					buf_ofs = ofs;
 | |
| 					node = (void *)buf;
 | |
| 				}
 | |
| 
 | |
| 				if (!dirent_crc((struct jffs2_raw_dirent *)
 | |
| 							node) ||
 | |
| 						!dirent_name_crc(
 | |
| 							(struct
 | |
| 							 jffs2_raw_dirent *)
 | |
| 							node))
 | |
| 					break;
 | |
| 				if (! (counterN%100))
 | |
| 					puts ("\b\b.  ");
 | |
| 				if (insert_node(&pL->dir, (u32) part->offset +
 | |
| 						ofs) == NULL) {
 | |
| 					free(buf);
 | |
| 					jffs2_free_cache(part);
 | |
| 					return 0;
 | |
| 				}
 | |
| 				if (max_totlen < node->totlen)
 | |
| 					max_totlen = node->totlen;
 | |
| 				counterN++;
 | |
| 				break;
 | |
| 			case JFFS2_NODETYPE_CLEANMARKER:
 | |
| 				if (node->totlen != sizeof(struct jffs2_unknown_node))
 | |
| 					printf("OOPS Cleanmarker has bad size "
 | |
| 						"%d != %zu\n",
 | |
| 						node->totlen,
 | |
| 						sizeof(struct jffs2_unknown_node));
 | |
| 				if ((node->totlen ==
 | |
| 				     sizeof(struct jffs2_unknown_node)) &&
 | |
| 				    (ofs == sector_ofs)) {
 | |
| 					/*
 | |
| 					 * Found a CLEANMARKER at the beginning
 | |
| 					 * of the sector. It's in the correct
 | |
| 					 * place with correct size and CRC.
 | |
| 					 */
 | |
| 					clean_sector = 1;
 | |
| 				}
 | |
| 				break;
 | |
| 			case JFFS2_NODETYPE_PADDING:
 | |
| 				if (node->totlen < sizeof(struct jffs2_unknown_node))
 | |
| 					printf("OOPS Padding has bad size "
 | |
| 						"%d < %zu\n",
 | |
| 						node->totlen,
 | |
| 						sizeof(struct jffs2_unknown_node));
 | |
| 				break;
 | |
| 			case JFFS2_NODETYPE_SUMMARY:
 | |
| 				break;
 | |
| 			default:
 | |
| 				printf("Unknown node type: %x len %d offset 0x%x\n",
 | |
| 					node->nodetype,
 | |
| 					node->totlen, ofs);
 | |
| 			}
 | |
| 			ofs += ((node->totlen + 3) & ~3);
 | |
| 			counterF++;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	free(buf);
 | |
| #if defined(CONFIG_SYS_JFFS2_SORT_FRAGMENTS)
 | |
| 	/*
 | |
| 	 * Sort the lists.
 | |
| 	 */
 | |
| 	sort_list(&pL->frag);
 | |
| 	sort_list(&pL->dir);
 | |
| #endif
 | |
| 	putstr("\b\b done.\r\n");		/* close off the dots */
 | |
| 
 | |
| 	/* We don't care if malloc failed - then each read operation will
 | |
| 	 * allocate its own buffer as necessary (NAND) or will read directly
 | |
| 	 * from flash (NOR).
 | |
| 	 */
 | |
| 	pL->readbuf = malloc(max_totlen);
 | |
| 
 | |
| 	/* turn the lcd back on. */
 | |
| 	/* splash(); */
 | |
| 
 | |
| #if 0
 | |
| 	putLabeledWord("dir entries = ", pL->dir.listCount);
 | |
| 	putLabeledWord("frag entries = ", pL->frag.listCount);
 | |
| 	putLabeledWord("+4 increments = ", counter4);
 | |
| 	putLabeledWord("+file_offset increments = ", counterF);
 | |
| 
 | |
| #endif
 | |
| 
 | |
| #ifdef DEBUG_DIRENTS
 | |
| 	dump_dirents(pL);
 | |
| #endif
 | |
| 
 | |
| #ifdef DEBUG_FRAGMENTS
 | |
| 	dump_fragments(pL);
 | |
| #endif
 | |
| 
 | |
| 	/* give visual feedback that we are done scanning the flash */
 | |
| 	led_blink(0x0, 0x0, 0x1, 0x1);	/* off, forever, on 100ms, off 100ms */
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| 
 | |
| static u32
 | |
| jffs2_1pass_fill_info(struct b_lists * pL, struct b_jffs2_info * piL)
 | |
| {
 | |
| 	struct b_node *b;
 | |
| 	struct jffs2_raw_inode ojNode;
 | |
| 	struct jffs2_raw_inode *jNode;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < JFFS2_NUM_COMPR; i++) {
 | |
| 		piL->compr_info[i].num_frags = 0;
 | |
| 		piL->compr_info[i].compr_sum = 0;
 | |
| 		piL->compr_info[i].decompr_sum = 0;
 | |
| 	}
 | |
| 
 | |
| 	b = pL->frag.listHead;
 | |
| 	while (b) {
 | |
| 		jNode = (struct jffs2_raw_inode *) get_fl_mem(b->offset,
 | |
| 			sizeof(ojNode), &ojNode);
 | |
| 		if (jNode->compr < JFFS2_NUM_COMPR) {
 | |
| 			piL->compr_info[jNode->compr].num_frags++;
 | |
| 			piL->compr_info[jNode->compr].compr_sum += jNode->csize;
 | |
| 			piL->compr_info[jNode->compr].decompr_sum += jNode->dsize;
 | |
| 		}
 | |
| 		b = b->next;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| static struct b_lists *
 | |
| jffs2_get_list(struct part_info * part, const char *who)
 | |
| {
 | |
| 	/* copy requested part_info struct pointer to global location */
 | |
| 	current_part = part;
 | |
| 
 | |
| 	if (jffs2_1pass_rescan_needed(part)) {
 | |
| 		if (!jffs2_1pass_build_lists(part)) {
 | |
| 			printf("%s: Failed to scan JFFSv2 file structure\n", who);
 | |
| 			return NULL;
 | |
| 		}
 | |
| 	}
 | |
| 	return (struct b_lists *)part->jffs2_priv;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* Print directory / file contents */
 | |
| u32
 | |
| jffs2_1pass_ls(struct part_info * part, const char *fname)
 | |
| {
 | |
| 	struct b_lists *pl;
 | |
| 	long ret = 1;
 | |
| 	u32 inode;
 | |
| 
 | |
| 	if (! (pl = jffs2_get_list(part, "ls")))
 | |
| 		return 0;
 | |
| 
 | |
| 	if (! (inode = jffs2_1pass_search_list_inodes(pl, fname, 1))) {
 | |
| 		putstr("ls: Failed to scan jffs2 file structure\r\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 
 | |
| #if 0
 | |
| 	putLabeledWord("found file at inode = ", inode);
 | |
| 	putLabeledWord("read_inode returns = ", ret);
 | |
| #endif
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* Load a file from flash into memory. fname can be a full path */
 | |
| u32
 | |
| jffs2_1pass_load(char *dest, struct part_info * part, const char *fname)
 | |
| {
 | |
| 
 | |
| 	struct b_lists *pl;
 | |
| 	long ret = 1;
 | |
| 	u32 inode;
 | |
| 
 | |
| 	if (! (pl  = jffs2_get_list(part, "load")))
 | |
| 		return 0;
 | |
| 
 | |
| 	if (! (inode = jffs2_1pass_search_inode(pl, fname, 1))) {
 | |
| 		putstr("load: Failed to find inode\r\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	/* Resolve symlinks */
 | |
| 	if (! (inode = jffs2_1pass_resolve_inode(pl, inode))) {
 | |
| 		putstr("load: Failed to resolve inode structure\r\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	if ((ret = jffs2_1pass_read_inode(pl, inode, dest)) < 0) {
 | |
| 		putstr("load: Failed to read inode\r\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	DEBUGF ("load: loaded '%s' to 0x%lx (%ld bytes)\n", fname,
 | |
| 				(unsigned long) dest, ret);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /* Return information about the fs on this partition */
 | |
| u32
 | |
| jffs2_1pass_info(struct part_info * part)
 | |
| {
 | |
| 	struct b_jffs2_info info;
 | |
| 	struct b_lists *pl;
 | |
| 	int i;
 | |
| 
 | |
| 	if (! (pl  = jffs2_get_list(part, "info")))
 | |
| 		return 0;
 | |
| 
 | |
| 	jffs2_1pass_fill_info(pl, &info);
 | |
| 	for (i = 0; i < JFFS2_NUM_COMPR; i++) {
 | |
| 		printf ("Compression: %s\n"
 | |
| 			"\tfrag count: %d\n"
 | |
| 			"\tcompressed sum: %d\n"
 | |
| 			"\tuncompressed sum: %d\n",
 | |
| 			compr_names[i],
 | |
| 			info.compr_info[i].num_frags,
 | |
| 			info.compr_info[i].compr_sum,
 | |
| 			info.compr_info[i].decompr_sum);
 | |
| 	}
 | |
| 	return 1;
 | |
| }
 |