mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-12-20 17:01:50 +01:00
8918b60e33
Allow to flash a board using NXP UUU utility: - Enable fastboot support on USB. - Add fastboot partition aliases with names used by UUU. Also add extra environment variables used by UUU. - Set 'dofastboot' environment variable based on boot device configuration, allowing to automatically enter fastboot when booting from USB. Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
98 lines
2.6 KiB
ReStructuredText
98 lines
2.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
imx93_frdm
|
|
==========
|
|
|
|
U-Boot for the NXP i.MX93 FRDM board
|
|
|
|
Quick Start
|
|
-----------
|
|
|
|
- Get and Build the ARM Trusted firmware
|
|
- Get the DDR firmware
|
|
- Get ahab-container.img
|
|
- Build U-Boot
|
|
- Boot from the SD card
|
|
- Boot using USB serial download (uuu)
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
--------------------------------------
|
|
|
|
Note: srctree is U-Boot source directory
|
|
Get ATF from: https://github.com/nxp-imx/imx-atf/
|
|
branch: lf_v2.8
|
|
|
|
.. code-block:: bash
|
|
|
|
$ unset LDFLAGS
|
|
$ make PLAT=imx93 bl31
|
|
$ cp build/imx93/release/bl31.bin $(srctree)
|
|
|
|
Get the DDR firmware
|
|
--------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin
|
|
$ chmod +x firmware-imx-8.21.bin
|
|
$ ./firmware-imx-8.21.bin
|
|
$ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
|
|
|
|
Get ahab-container.img
|
|
----------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.11.bin
|
|
$ chmod +x firmware-sentinel-0.11.bin
|
|
$ ./firmware-sentinel-0.11.bin
|
|
$ cp firmware-sentinel-0.11/mx93a1-ahab-container.img $(srctree)
|
|
|
|
Build U-Boot
|
|
------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ export CROSS_COMPILE=aarch64-poky-linux-
|
|
$ make imx93_frdm_defconfig
|
|
$ make
|
|
|
|
Copy the flash.bin binary to the MicroSD card at offset 32KB:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ dd if=flash.bin of=/dev/sd[x] bs=1k seek=32; sync
|
|
|
|
Boot from the SD card
|
|
---------------------
|
|
|
|
- Configure SW1 boot switches to SD boot mode:
|
|
0011 SW1[3:0] - ("USDHC2 4-bit SD3.0" Boot Mode)
|
|
- Insert the SD card in the SD slot (P13) of the board.
|
|
- Connect a USB Type-C cable into the P16 Debug USB Port and connect
|
|
using a terminal emulator at 115200 bps, 8n1. The console will show up
|
|
at /dev/ttyACM0.
|
|
- Power on the board by connecting a USB Type-C cable into the P1
|
|
Power USB Port.
|
|
|
|
Boot using USB serial download (uuu)
|
|
------------------------------------
|
|
|
|
- Configure SW1 boot switches to serial download boot mode:
|
|
0001 SW1[3:0] - ("Serial downloader (USB)" Boot Mode)
|
|
- Plug USB Type-C cable into the P2 device port.
|
|
- Connect a USB Type-C cable into the P16 Debug USB Port and connect
|
|
using a terminal emulator at 115200 bps, 8n1. The console will show up
|
|
at /dev/ttyACM0.
|
|
- Power on the board by connecting a USB Type-C cable into the P1
|
|
Power USB Port.
|
|
- Use NXP Universal Update Utility `NXP Universal Update Utility`_ to boot or
|
|
flash the device. E.g. following command can be used to flash an image onto
|
|
the eMMC storage:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ uuu -V -b emmc_all <image file>
|
|
|
|
.. _`NXP Universal Update Utility`: https://github.com/nxp-imx/mfgtools
|