mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-12-20 00:41:29 +01:00
39eda3f037
Add documentation to support the addition of the MPFS Video Kit. Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
106 lines
2.5 KiB
ReStructuredText
106 lines
2.5 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
Microchip PolarFire SoC Video Kit
|
|
==================================
|
|
|
|
RISC-V PolarFire SoC
|
|
--------------------
|
|
|
|
The PolarFire SoC is the 4+1 64-bit RISC-V SoC from Microchip.
|
|
|
|
The Video Kit development platform is based on PolarFire SoC and capable
|
|
of running Linux.
|
|
|
|
Mainline support
|
|
----------------
|
|
|
|
The support for following drivers are already enabled:
|
|
|
|
1. NS16550 UART Driver.
|
|
2. Microchip Clock Driver.
|
|
3. Cadence MACB ethernet driver for networking support.
|
|
4. Cadence MMC Driver for eMMC/SD support.
|
|
5. Microchip I2C Driver.
|
|
|
|
.. include:: mpfs_build_boot.rst
|
|
|
|
Microchip boot-flow
|
|
~~~~~~~~~~~~~~~~~~~
|
|
|
|
HSS with OpenSBI (M-Mode) -> U-Boot (S-Mode) -> Linux (S-Mode)
|
|
|
|
Build the HSS (Hart Software Services) - Microchip boot-flow
|
|
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
|
|
|
|
(Note: HSS git repo is at https://github.com/polarfire-soc/hart-software-services)
|
|
|
|
1. Configure
|
|
|
|
.. code-block:: none
|
|
|
|
make BOARD=mpfs-video-kit config
|
|
|
|
Alternatively, copy the default config for Microchip boot-flow.
|
|
|
|
.. code-block:: none
|
|
|
|
cp boards/mpfs-video-kit/def_config .config
|
|
|
|
2. make BOARD=mpfs-video-kit
|
|
3. In the Default subdirectory, the standard build will create hss.elf and
|
|
various binary formats (hss.hex and hss.bin).
|
|
|
|
The FPGA design will use the hss.hex or hss.bin.
|
|
|
|
.. include:: mpfs_design_hss.rst
|
|
|
|
Custom boot-flow
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
HSS without OpenSBI (M-Mode) -> OpenSBI (M-Mode) -> U-Boot (S-Mode) -> Linux (S-Mode)
|
|
|
|
Build OpenSBI
|
|
'''''''''''''
|
|
|
|
1. Get the OpenSBI source
|
|
|
|
.. code-block:: none
|
|
|
|
git clone https://github.com/riscv/opensbi.git
|
|
cd opensbi
|
|
|
|
2. Build
|
|
|
|
.. code-block:: none
|
|
|
|
make PLATFORM=generic FW_PAYLOAD_PATH=<u-boot-directory>/u-boot.bin
|
|
FW_FDT_PATH=<u-boot-directory>/dts/upstream/src/riscv/microchip/mpfs-sev-kit-.dtb
|
|
|
|
3. Output "fw_payload.bin" file available at
|
|
"<opensbi-directory>/build/platform/generic/firmware/fw_payload.bin"
|
|
|
|
Build the HSS (Hart Software Services)- Custom boot-flow
|
|
''''''''''''''''''''''''''''''''''''''''''''''''''''''''
|
|
|
|
(Note: HSS git repo is at https://github.com/polarfire-soc/hart-software-services)
|
|
|
|
1. Configure
|
|
|
|
.. code-block:: none
|
|
|
|
make BOARD=mpfs-video-kit config
|
|
|
|
Alternatively, copy the default custom config for Custom boot-flow.
|
|
|
|
.. code-block:: none
|
|
|
|
cp boards/mpfs-video-kit/def_config_custom .config
|
|
|
|
2. make BOARD=mpfs-video-kit
|
|
3. In the Default subdirectory, the standard build will create hss.elf and
|
|
various binary formats (hss.hex and hss.bin).
|
|
|
|
The FPGA design will use the hss.hex or hss.bin.
|
|
|
|
.. include:: mpfs_common.rst
|