mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-08-16 04:07:00 +02:00
344e2f2cd4
From reading the S34ML02G1 and the SAM9X60 datasheets again, it seems like we have to wait tREA after rising RE# before sampling the data. Thus pulse time must be at least tREA. Without this fix we got PMECC errors when reading, after switching to ONFI timing mode 3 on SAM9X60 SoC with S34ML02G1 raw NAND flash chip. The approach to set timings used before worked on sam9g20 and sama5d2 with the same flash (S34ML02G1), probably because those have a slower mck clock rate and thus the resolution of the timings setup is not as tight as with sam9x60. The approach to fix the issue was carried over from at91bootstrap, and has been successfully tested in at91bootstrap, U-Boot and Linux. Link: https://github.com/linux4sam/at91bootstrap/issues/174 Cc: Li Bin <bin.li@microchip.com> Signed-off-by: Alexander Dahl <ada@thorsis.com> |
||
|---|---|---|
| .. | ||
| Makefile | ||
| nand-controller.c | ||
| pmecc.c | ||
| pmecc.h | ||