mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-10-17 10:31:38 +02:00
3b64774323
- Fixed broken ICH SPI driver in software sequencer mode - Added "m25p,fast-read" to SPI flash node for x86 boards - Drop ROM_NEEDS_BLOBS and BUILD_ROM for x86 ROM builds - Define a default TSC timer frequency for all x86 boards - x86 MTRR MSR programming codes bug fixes - x86 "hob" command bug fixes - Don't program MTRR for DRAM for FSP1 - Move INIT_PHASE_END_FIRMWARE to FSP2 - Use external graphics card by default on Intel Crown Bay - tangier: Fix DMA controller IRQ polarity in CSRT
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.