mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-08-25 00:21:28 +02:00
Initial support for the Renesas Gray Hawk CPU and BreakOut boards. The arch/arm/dts/r8a779h0-gray-hawk-cpu.dtsi is extended version of: https://lore.kernel.org/linux-renesas-soc/b657402113267acd57aece0b4c681b707e704455.1706194617.git.geert+renesas@glider.be/ The version currenty submitted upstream lacks functionality which is present in this series. Once the upstream support implements that missing functionality, these DTs will be updated to match. Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
167 lines
2.9 KiB
Plaintext
167 lines
2.9 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
/*
|
|
* Device Tree Source for the Gray Hawk CPU board
|
|
*
|
|
* Copyright (C) 2023 Renesas Electronics Corp.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
#include "r8a779h0.dtsi"
|
|
|
|
/ {
|
|
model = "Renesas Gray Hawk CPU board";
|
|
compatible = "renesas,grayhawk-cpu", "renesas,r8a779h0";
|
|
|
|
aliases {
|
|
ethernet0 = &avb0;
|
|
serial0 = &hscif0;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "ignore_loglevel";
|
|
stdout-path = "serial0:921600n8";
|
|
};
|
|
|
|
memory@48000000 {
|
|
device_type = "memory";
|
|
/* first 128MB is reserved for secure area. */
|
|
reg = <0x0 0x48000000 0x0 0x78000000>;
|
|
};
|
|
|
|
memory@480000000 {
|
|
device_type = "memory";
|
|
reg = <0x4 0x80000000 0x1 0x80000000>;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&avb0 {
|
|
pinctrl-0 = <&avb0_pins>;
|
|
pinctrl-names = "default";
|
|
phy-handle = <&phy0>;
|
|
tx-internal-delay-ps = <2000>;
|
|
status = "okay";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-id0022.1622",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
rxc-skew-ps = <1500>;
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
|
|
reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&extal_clk {
|
|
clock-frequency = <16666666>;
|
|
};
|
|
|
|
&extalr_clk {
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
&hscif0 {
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
eeprom@50 {
|
|
compatible = "rohm,br24g01", "atmel,24c01";
|
|
label = "cpu-board";
|
|
reg = <0x50>;
|
|
pagesize = <8>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-0 = <&mmc_pins>;
|
|
pinctrl-1 = <&mmc_pins>;
|
|
pinctrl-names = "default", "state_uhs";
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
bus-width = <8>;
|
|
no-sd;
|
|
no-sdio;
|
|
non-removable;
|
|
full-pwr-cycle-in-suspend;
|
|
status = "okay";
|
|
};
|
|
|
|
&pfc {
|
|
pinctrl-0 = <&scif_clk_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
avb0_pins: avb0 {
|
|
mux {
|
|
groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
|
|
"avb0_txcrefclk";
|
|
function = "avb0";
|
|
};
|
|
|
|
pins_mdio {
|
|
groups = "avb0_mdio";
|
|
drive-strength = <21>;
|
|
};
|
|
|
|
pins_mii {
|
|
groups = "avb0_rgmii";
|
|
drive-strength = <21>;
|
|
};
|
|
};
|
|
|
|
hscif0_pins: hscif0 {
|
|
groups = "hscif0_data", "hscif0_ctrl";
|
|
function = "hscif0";
|
|
};
|
|
|
|
i2c0_pins: i2c0 {
|
|
groups = "i2c0";
|
|
function = "i2c0";
|
|
};
|
|
|
|
mmc_pins: mmc {
|
|
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
|
|
function = "mmc";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
scif_clk_pins: scif_clk {
|
|
groups = "scif_clk";
|
|
function = "scif_clk";
|
|
};
|
|
};
|
|
|
|
&scif_clk {
|
|
clock-frequency = <24000000>;
|
|
};
|