Nikita Kiryanov 43e568c4ae arm: am437x: cm-t43: set MPU and CORE voltages on boot
During boot, U-Boot raises the CPU frequency but the CORE and MPU regulators
are not updated. This is not a problem in cold boot since the default values
that the pmic outputs are correct, but if Linux were to switch the module to a
low power OPP, the new voltage values will be retained after a reboot and the
module will likely hang once U-Boot raises the CPU frequency back up.

Set both CORE and MPU regulators to to 1.1V on boot.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24 18:44:09 -05:00
..
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2015-09-11 17:12:57 -04:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2015-11-12 17:38:08 +01:00
2015-09-11 14:59:16 -04:00
2016-02-06 12:00:59 +01:00
2015-08-05 08:44:06 -06:00
2015-09-07 13:41:04 +02:00
2016-02-06 12:00:59 +01:00
2016-01-20 10:19:38 -05:00
2016-02-06 12:00:59 +01:00
2016-02-20 21:40:02 +01:00
2015-11-21 21:50:17 -05:00
2016-02-06 12:00:59 +01:00
2015-11-21 21:50:17 -05:00
2016-02-08 10:10:49 -05:00
2016-01-25 10:40:00 -05:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2015-11-21 21:50:17 -05:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-01-19 08:31:21 -05:00