u-boot/drivers/pci/pci_mpc85xx.c
Tom Rini d678a59d2d Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19 08:16:36 -06:00

205 lines
5.0 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* (C) Copyright 2019
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
*/
#include <common.h>
#include <asm/bitops.h>
#include <pci.h>
#include <dm.h>
#include <asm/fsl_law.h>
struct mpc85xx_pci_priv {
void __iomem *cfg_addr;
void __iomem *cfg_data;
};
static int mpc85xx_pci_dm_read_config(const struct udevice *dev, pci_dev_t bdf,
uint offset, ulong *value,
enum pci_size_t size)
{
struct mpc85xx_pci_priv *priv = dev_get_priv(dev);
u32 addr;
if (offset > 0xff) {
*value = pci_get_ff(size);
return 0;
}
/* Skip mpc85xx PCI controller's ATMU inbound registers */
if (PCI_BUS(bdf) == 0 && PCI_DEV(bdf) == 0 && PCI_FUNC(bdf) == 0 &&
(offset & ~3) >= PCI_BASE_ADDRESS_0 && (offset & ~3) <= PCI_BASE_ADDRESS_5) {
*value = 0;
return 0;
}
addr = PCI_CONF1_ADDRESS(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), offset);
out_be32(priv->cfg_addr, addr);
sync();
switch (size) {
case PCI_SIZE_8:
*value = in_8(priv->cfg_data + (offset & 3));
break;
case PCI_SIZE_16:
*value = in_le16(priv->cfg_data + (offset & 2));
break;
case PCI_SIZE_32:
*value = in_le32(priv->cfg_data);
break;
}
return 0;
}
static int mpc85xx_pci_dm_write_config(struct udevice *dev, pci_dev_t bdf,
uint offset, ulong value,
enum pci_size_t size)
{
struct mpc85xx_pci_priv *priv = dev_get_priv(dev);
u32 addr;
if (offset > 0xff)
return 0;
/* Skip mpc85xx PCI controller's ATMU inbound registers */
if (PCI_BUS(bdf) == 0 && PCI_DEV(bdf) == 0 && PCI_FUNC(bdf) == 0 &&
(offset & ~3) >= PCI_BASE_ADDRESS_0 && (offset & ~3) <= PCI_BASE_ADDRESS_5)
return 0;
addr = PCI_CONF1_ADDRESS(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), offset);
out_be32(priv->cfg_addr, addr);
sync();
switch (size) {
case PCI_SIZE_8:
out_8(priv->cfg_data + (offset & 3), value);
break;
case PCI_SIZE_16:
out_le16(priv->cfg_data + (offset & 2), value);
break;
case PCI_SIZE_32:
out_le32(priv->cfg_data, value);
break;
}
sync();
return 0;
}
#ifdef CONFIG_FSL_LAW
static int
mpc85xx_pci_dm_setup_laws(struct pci_region *io, struct pci_region *mem,
struct pci_region *pre)
{
/*
* Unfortunately we have defines for this addresse,
* as we have to setup the TLB, and at this stage
* we have no access to DT ... may we check here
* if the value in the define is the same ?
*/
if (mem)
set_next_law(mem->phys_start, law_size_bits(mem->size),
LAW_TRGT_IF_PCI);
if (io)
set_next_law(io->phys_start, law_size_bits(io->size),
LAW_TRGT_IF_PCI);
if (pre)
set_next_law(pre->phys_start, law_size_bits(pre->size),
LAW_TRGT_IF_PCI);
return 0;
}
#endif
static int mpc85xx_pci_dm_probe(struct udevice *dev)
{
struct mpc85xx_pci_priv *priv = dev_get_priv(dev);
struct pci_region *io;
struct pci_region *mem;
struct pci_region *pre;
int count;
ccsr_pcix_t *pcix;
count = pci_get_regions(dev, &io, &mem, &pre);
if (count != 2) {
printf("%s: wrong count of regions %d only 2 allowed\n",
__func__, count);
return -EINVAL;
}
#ifdef CONFIG_FSL_LAW
mpc85xx_pci_dm_setup_laws(io, mem, pre);
#endif
pcix = priv->cfg_addr;
/* BAR 1: memory */
out_be32(&pcix->potar1, mem->bus_start >> 12);
out_be32(&pcix->potear1, (u64)mem->bus_start >> 44);
out_be32(&pcix->powbar1, mem->phys_start >> 12);
out_be32(&pcix->powbear1, (u64)mem->phys_start >> 44);
out_be32(&pcix->powar1, (POWAR_EN | POWAR_MEM_READ |
POWAR_MEM_WRITE | (__ilog2(mem->size) - 1)));
/* BAR 1: IO */
out_be32(&pcix->potar2, io->bus_start >> 12);
out_be32(&pcix->potear2, (u64)io->bus_start >> 44);
out_be32(&pcix->powbar2, io->phys_start >> 12);
out_be32(&pcix->powbear2, (u64)io->phys_start >> 44);
out_be32(&pcix->powar2, (POWAR_EN | POWAR_IO_READ |
POWAR_IO_WRITE | (__ilog2(io->size) - 1)));
out_be32(&pcix->pitar1, 0);
out_be32(&pcix->piwbar1, 0);
out_be32(&pcix->piwar1, (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G));
out_be32(&pcix->powar3, 0);
out_be32(&pcix->powar4, 0);
out_be32(&pcix->piwar2, 0);
out_be32(&pcix->piwar3, 0);
return 0;
}
static int mpc85xx_pci_dm_remove(struct udevice *dev)
{
return 0;
}
static int mpc85xx_pci_of_to_plat(struct udevice *dev)
{
struct mpc85xx_pci_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
addr = devfdt_get_addr_index(dev, 0);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
priv->cfg_addr = (void __iomem *)map_physmem(addr, 0, MAP_NOCACHE);
priv->cfg_data = (void __iomem *)((ulong)priv->cfg_addr + 4);
return 0;
}
static const struct dm_pci_ops mpc85xx_pci_ops = {
.read_config = mpc85xx_pci_dm_read_config,
.write_config = mpc85xx_pci_dm_write_config,
};
static const struct udevice_id mpc85xx_pci_ids[] = {
{ .compatible = "fsl,mpc8540-pci" },
{ }
};
U_BOOT_DRIVER(mpc85xx_pci) = {
.name = "mpc85xx_pci",
.id = UCLASS_PCI,
.of_match = mpc85xx_pci_ids,
.ops = &mpc85xx_pci_ops,
.probe = mpc85xx_pci_dm_probe,
.remove = mpc85xx_pci_dm_remove,
.of_to_plat = mpc85xx_pci_of_to_plat,
.priv_auto = sizeof(struct mpc85xx_pci_priv),
};