u-boot/drivers/mtd/stm32_flash.c
Tom Rini d678a59d2d Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19 08:16:36 -06:00

152 lines
3.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2015
* Kamil Lulko, <kamil.lulko@gmail.com>
*/
#include <common.h>
#include <flash.h>
#include <asm/io.h>
#include <asm/arch/stm32.h>
#include "stm32_flash.h"
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
#define STM32_FLASH ((struct stm32_flash_regs *)STM32_FLASH_CNTL_BASE)
void stm32_flash_latency_cfg(int latency)
{
/* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */
writel(FLASH_ACR_WS(latency) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN
| FLASH_ACR_DCEN, &STM32_FLASH->acr);
}
static void stm32_flash_lock(u8 lock)
{
if (lock) {
setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_LOCK);
} else {
writel(STM32_FLASH_KEY1, &STM32_FLASH->key);
writel(STM32_FLASH_KEY2, &STM32_FLASH->key);
}
}
unsigned long flash_init(void)
{
unsigned long total_size = 0;
u8 i, j;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
flash_info[i].flash_id = FLASH_STM32;
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
flash_info[i].start[0] = CFG_SYS_FLASH_BASE + (i << 20);
flash_info[i].size = sect_sz_kb[0];
for (j = 1; j < CONFIG_SYS_MAX_FLASH_SECT; j++) {
flash_info[i].start[j] = flash_info[i].start[j - 1]
+ (sect_sz_kb[j - 1]);
flash_info[i].size += sect_sz_kb[j];
}
total_size += flash_info[i].size;
}
return total_size;
}
void flash_print_info(flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf("missing or unknown FLASH type\n");
return;
} else if (info->flash_id == FLASH_STM32) {
printf("stm32 Embedded Flash\n");
}
printf(" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
if ((i % 5) == 0)
printf("\n ");
printf(" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf("\n");
return;
}
int flash_erase(flash_info_t *info, int first, int last)
{
u8 bank = 0xFF;
int i;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
if (info == &flash_info[i]) {
bank = i;
break;
}
}
if (bank == 0xFF)
return -1;
stm32_flash_lock(0);
for (i = first; i <= last; i++) {
while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY)
;
/* clear old sector number before writing a new one */
clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SNB_MASK);
if (bank == 0) {
setbits_le32(&STM32_FLASH->cr,
(i << STM32_FLASH_CR_SNB_OFFSET));
} else if (bank == 1) {
setbits_le32(&STM32_FLASH->cr,
((0x10 | i) << STM32_FLASH_CR_SNB_OFFSET));
} else {
stm32_flash_lock(1);
return -1;
}
setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER);
setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_STRT);
while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY)
;
clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER);
}
stm32_flash_lock(1);
return 0;
}
int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong i;
while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY)
;
stm32_flash_lock(0);
setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG);
/* To make things simple use byte writes only */
for (i = 0; i < cnt; i++) {
*(uchar *)(addr + i) = src[i];
/* avoid re-ordering flash data write and busy status
* check as flash memory space attributes are generally Normal
*/
mb();
while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY)
;
}
clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG);
stm32_flash_lock(1);
return 0;
}