mirror of
				https://source.denx.de/u-boot/u-boot.git
				synced 2025-11-03 18:01:41 +01:00 
			
		
		
		
	
		
			
				
	
	
		
			465 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			465 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * (C) Copyright 2007-2011
 | 
						|
 * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
 | 
						|
 * Aaron <leafy.myeh@allwinnertech.com>
 | 
						|
 *
 | 
						|
 * MMC driver for allwinner sunxi platform.
 | 
						|
 *
 | 
						|
 * SPDX-License-Identifier:	GPL-2.0+
 | 
						|
 */
 | 
						|
 | 
						|
#include <common.h>
 | 
						|
#include <errno.h>
 | 
						|
#include <malloc.h>
 | 
						|
#include <mmc.h>
 | 
						|
#include <asm/io.h>
 | 
						|
#include <asm/arch/clock.h>
 | 
						|
#include <asm/arch/cpu.h>
 | 
						|
#include <asm/arch/gpio.h>
 | 
						|
#include <asm/arch/mmc.h>
 | 
						|
#include <asm-generic/gpio.h>
 | 
						|
 | 
						|
struct sunxi_mmc_host {
 | 
						|
	unsigned mmc_no;
 | 
						|
	uint32_t *mclkreg;
 | 
						|
	unsigned fatal_err;
 | 
						|
	struct sunxi_mmc *reg;
 | 
						|
	struct mmc_config cfg;
 | 
						|
};
 | 
						|
 | 
						|
/* support 4 mmc hosts */
 | 
						|
struct sunxi_mmc_host mmc_host[4];
 | 
						|
 | 
						|
static int sunxi_mmc_getcd_gpio(int sdc_no)
 | 
						|
{
 | 
						|
	switch (sdc_no) {
 | 
						|
	case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN);
 | 
						|
	case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN);
 | 
						|
	case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
 | 
						|
	case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
 | 
						|
	}
 | 
						|
	return -EINVAL;
 | 
						|
}
 | 
						|
 | 
						|
static int mmc_resource_init(int sdc_no)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
 | 
						|
	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 | 
						|
	int cd_pin, ret = 0;
 | 
						|
 | 
						|
	debug("init mmc %d resource\n", sdc_no);
 | 
						|
 | 
						|
	switch (sdc_no) {
 | 
						|
	case 0:
 | 
						|
		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
 | 
						|
		mmchost->mclkreg = &ccm->sd0_clk_cfg;
 | 
						|
		break;
 | 
						|
	case 1:
 | 
						|
		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
 | 
						|
		mmchost->mclkreg = &ccm->sd1_clk_cfg;
 | 
						|
		break;
 | 
						|
	case 2:
 | 
						|
		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
 | 
						|
		mmchost->mclkreg = &ccm->sd2_clk_cfg;
 | 
						|
		break;
 | 
						|
	case 3:
 | 
						|
		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
 | 
						|
		mmchost->mclkreg = &ccm->sd3_clk_cfg;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		printf("Wrong mmc number %d\n", sdc_no);
 | 
						|
		return -1;
 | 
						|
	}
 | 
						|
	mmchost->mmc_no = sdc_no;
 | 
						|
 | 
						|
	cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
 | 
						|
	if (cd_pin >= 0) {
 | 
						|
		ret = gpio_request(cd_pin, "mmc_cd");
 | 
						|
		if (!ret)
 | 
						|
			ret = gpio_direction_input(cd_pin);
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int mmc_set_mod_clk(struct sunxi_mmc_host *mmchost, unsigned int hz)
 | 
						|
{
 | 
						|
	unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
 | 
						|
 | 
						|
	if (hz <= 24000000) {
 | 
						|
		pll = CCM_MMC_CTRL_OSCM24;
 | 
						|
		pll_hz = 24000000;
 | 
						|
	} else {
 | 
						|
#ifdef CONFIG_MACH_SUN9I
 | 
						|
		pll = CCM_MMC_CTRL_PLL_PERIPH0;
 | 
						|
		pll_hz = clock_get_pll4_periph0();
 | 
						|
#else
 | 
						|
		pll = CCM_MMC_CTRL_PLL6;
 | 
						|
		pll_hz = clock_get_pll6();
 | 
						|
#endif
 | 
						|
	}
 | 
						|
 | 
						|
	div = pll_hz / hz;
 | 
						|
	if (pll_hz % hz)
 | 
						|
		div++;
 | 
						|
 | 
						|
	n = 0;
 | 
						|
	while (div > 16) {
 | 
						|
		n++;
 | 
						|
		div = (div + 1) / 2;
 | 
						|
	}
 | 
						|
 | 
						|
	if (n > 3) {
 | 
						|
		printf("mmc %u error cannot set clock to %u\n",
 | 
						|
		       mmchost->mmc_no, hz);
 | 
						|
		return -1;
 | 
						|
	}
 | 
						|
 | 
						|
	/* determine delays */
 | 
						|
	if (hz <= 400000) {
 | 
						|
		oclk_dly = 0;
 | 
						|
		sclk_dly = 7;
 | 
						|
	} else if (hz <= 25000000) {
 | 
						|
		oclk_dly = 0;
 | 
						|
		sclk_dly = 5;
 | 
						|
	} else if (hz <= 50000000) {
 | 
						|
		oclk_dly = 3;
 | 
						|
		sclk_dly = 5;
 | 
						|
	} else {
 | 
						|
		/* hz > 50000000 */
 | 
						|
		oclk_dly = 2;
 | 
						|
		sclk_dly = 4;
 | 
						|
	}
 | 
						|
 | 
						|
	writel(CCM_MMC_CTRL_ENABLE | pll | CCM_MMC_CTRL_SCLK_DLY(sclk_dly) |
 | 
						|
	       CCM_MMC_CTRL_N(n) | CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
 | 
						|
	       CCM_MMC_CTRL_M(div), mmchost->mclkreg);
 | 
						|
 | 
						|
	debug("mmc %u set mod-clk req %u parent %u n %u m %u rate %u\n",
 | 
						|
	      mmchost->mmc_no, hz, pll_hz, 1u << n, div,
 | 
						|
	      pll_hz / (1u << n) / div);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int mmc_clk_io_on(int sdc_no)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
 | 
						|
	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 | 
						|
 | 
						|
	debug("init mmc %d clock and io\n", sdc_no);
 | 
						|
 | 
						|
	/* config ahb clock */
 | 
						|
	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
 | 
						|
 | 
						|
#ifdef CONFIG_SUNXI_GEN_SUN6I
 | 
						|
	/* unassert reset */
 | 
						|
	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
 | 
						|
#endif
 | 
						|
#if defined(CONFIG_MACH_SUN9I)
 | 
						|
	/* sun9i has a mmc-common module, also set the gate and reset there */
 | 
						|
	writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET,
 | 
						|
	       SUNXI_MMC_COMMON_BASE + 4 * sdc_no);
 | 
						|
#endif
 | 
						|
 | 
						|
	return mmc_set_mod_clk(mmchost, 24000000);
 | 
						|
}
 | 
						|
 | 
						|
static int mmc_update_clk(struct mmc *mmc)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = mmc->priv;
 | 
						|
	unsigned int cmd;
 | 
						|
	unsigned timeout_msecs = 2000;
 | 
						|
 | 
						|
	cmd = SUNXI_MMC_CMD_START |
 | 
						|
	      SUNXI_MMC_CMD_UPCLK_ONLY |
 | 
						|
	      SUNXI_MMC_CMD_WAIT_PRE_OVER;
 | 
						|
	writel(cmd, &mmchost->reg->cmd);
 | 
						|
	while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) {
 | 
						|
		if (!timeout_msecs--)
 | 
						|
			return -1;
 | 
						|
		udelay(1000);
 | 
						|
	}
 | 
						|
 | 
						|
	/* clock update sets various irq status bits, clear these */
 | 
						|
	writel(readl(&mmchost->reg->rint), &mmchost->reg->rint);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int mmc_config_clock(struct mmc *mmc)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = mmc->priv;
 | 
						|
	unsigned rval = readl(&mmchost->reg->clkcr);
 | 
						|
 | 
						|
	/* Disable Clock */
 | 
						|
	rval &= ~SUNXI_MMC_CLK_ENABLE;
 | 
						|
	writel(rval, &mmchost->reg->clkcr);
 | 
						|
	if (mmc_update_clk(mmc))
 | 
						|
		return -1;
 | 
						|
 | 
						|
	/* Set mod_clk to new rate */
 | 
						|
	if (mmc_set_mod_clk(mmchost, mmc->clock))
 | 
						|
		return -1;
 | 
						|
 | 
						|
	/* Clear internal divider */
 | 
						|
	rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
 | 
						|
	writel(rval, &mmchost->reg->clkcr);
 | 
						|
 | 
						|
	/* Re-enable Clock */
 | 
						|
	rval |= SUNXI_MMC_CLK_ENABLE;
 | 
						|
	writel(rval, &mmchost->reg->clkcr);
 | 
						|
	if (mmc_update_clk(mmc))
 | 
						|
		return -1;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void sunxi_mmc_set_ios(struct mmc *mmc)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = mmc->priv;
 | 
						|
 | 
						|
	debug("set ios: bus_width: %x, clock: %d\n",
 | 
						|
	      mmc->bus_width, mmc->clock);
 | 
						|
 | 
						|
	/* Change clock first */
 | 
						|
	if (mmc->clock && mmc_config_clock(mmc) != 0) {
 | 
						|
		mmchost->fatal_err = 1;
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Change bus width */
 | 
						|
	if (mmc->bus_width == 8)
 | 
						|
		writel(0x2, &mmchost->reg->width);
 | 
						|
	else if (mmc->bus_width == 4)
 | 
						|
		writel(0x1, &mmchost->reg->width);
 | 
						|
	else
 | 
						|
		writel(0x0, &mmchost->reg->width);
 | 
						|
}
 | 
						|
 | 
						|
static int sunxi_mmc_core_init(struct mmc *mmc)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = mmc->priv;
 | 
						|
 | 
						|
	/* Reset controller */
 | 
						|
	writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
 | 
						|
	udelay(1000);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = mmc->priv;
 | 
						|
	const int reading = !!(data->flags & MMC_DATA_READ);
 | 
						|
	const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
 | 
						|
					      SUNXI_MMC_STATUS_FIFO_FULL;
 | 
						|
	unsigned i;
 | 
						|
	unsigned byte_cnt = data->blocksize * data->blocks;
 | 
						|
	unsigned timeout_msecs = 2000;
 | 
						|
	unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
 | 
						|
 | 
						|
	/* Always read / write data through the CPU */
 | 
						|
	setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
 | 
						|
 | 
						|
	for (i = 0; i < (byte_cnt >> 2); i++) {
 | 
						|
		while (readl(&mmchost->reg->status) & status_bit) {
 | 
						|
			if (!timeout_msecs--)
 | 
						|
				return -1;
 | 
						|
			udelay(1000);
 | 
						|
		}
 | 
						|
 | 
						|
		if (reading)
 | 
						|
			buff[i] = readl(&mmchost->reg->fifo);
 | 
						|
		else
 | 
						|
			writel(buff[i], &mmchost->reg->fifo);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs,
 | 
						|
			 unsigned int done_bit, const char *what)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = mmc->priv;
 | 
						|
	unsigned int status;
 | 
						|
 | 
						|
	do {
 | 
						|
		status = readl(&mmchost->reg->rint);
 | 
						|
		if (!timeout_msecs-- ||
 | 
						|
		    (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
 | 
						|
			debug("%s timeout %x\n", what,
 | 
						|
			      status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
 | 
						|
			return TIMEOUT;
 | 
						|
		}
 | 
						|
		udelay(1000);
 | 
						|
	} while (!(status & done_bit));
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sunxi_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 | 
						|
			      struct mmc_data *data)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = mmc->priv;
 | 
						|
	unsigned int cmdval = SUNXI_MMC_CMD_START;
 | 
						|
	unsigned int timeout_msecs;
 | 
						|
	int error = 0;
 | 
						|
	unsigned int status = 0;
 | 
						|
	unsigned int bytecnt = 0;
 | 
						|
 | 
						|
	if (mmchost->fatal_err)
 | 
						|
		return -1;
 | 
						|
	if (cmd->resp_type & MMC_RSP_BUSY)
 | 
						|
		debug("mmc cmd %d check rsp busy\n", cmd->cmdidx);
 | 
						|
	if (cmd->cmdidx == 12)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	if (!cmd->cmdidx)
 | 
						|
		cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ;
 | 
						|
	if (cmd->resp_type & MMC_RSP_PRESENT)
 | 
						|
		cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE;
 | 
						|
	if (cmd->resp_type & MMC_RSP_136)
 | 
						|
		cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE;
 | 
						|
	if (cmd->resp_type & MMC_RSP_CRC)
 | 
						|
		cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
 | 
						|
 | 
						|
	if (data) {
 | 
						|
		if ((u32) data->dest & 0x3) {
 | 
						|
			error = -1;
 | 
						|
			goto out;
 | 
						|
		}
 | 
						|
 | 
						|
		cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER;
 | 
						|
		if (data->flags & MMC_DATA_WRITE)
 | 
						|
			cmdval |= SUNXI_MMC_CMD_WRITE;
 | 
						|
		if (data->blocks > 1)
 | 
						|
			cmdval |= SUNXI_MMC_CMD_AUTO_STOP;
 | 
						|
		writel(data->blocksize, &mmchost->reg->blksz);
 | 
						|
		writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt);
 | 
						|
	}
 | 
						|
 | 
						|
	debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no,
 | 
						|
	      cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
 | 
						|
	writel(cmd->cmdarg, &mmchost->reg->arg);
 | 
						|
 | 
						|
	if (!data)
 | 
						|
		writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * transfer data and check status
 | 
						|
	 * STATREG[2] : FIFO empty
 | 
						|
	 * STATREG[3] : FIFO full
 | 
						|
	 */
 | 
						|
	if (data) {
 | 
						|
		int ret = 0;
 | 
						|
 | 
						|
		bytecnt = data->blocksize * data->blocks;
 | 
						|
		debug("trans data %d bytes\n", bytecnt);
 | 
						|
		writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
 | 
						|
		ret = mmc_trans_data_by_cpu(mmc, data);
 | 
						|
		if (ret) {
 | 
						|
			error = readl(&mmchost->reg->rint) & \
 | 
						|
				SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
 | 
						|
			error = TIMEOUT;
 | 
						|
			goto out;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	error = mmc_rint_wait(mmc, 1000, SUNXI_MMC_RINT_COMMAND_DONE, "cmd");
 | 
						|
	if (error)
 | 
						|
		goto out;
 | 
						|
 | 
						|
	if (data) {
 | 
						|
		timeout_msecs = 120;
 | 
						|
		debug("cacl timeout %x msec\n", timeout_msecs);
 | 
						|
		error = mmc_rint_wait(mmc, timeout_msecs,
 | 
						|
				      data->blocks > 1 ?
 | 
						|
				      SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
 | 
						|
				      SUNXI_MMC_RINT_DATA_OVER,
 | 
						|
				      "data");
 | 
						|
		if (error)
 | 
						|
			goto out;
 | 
						|
	}
 | 
						|
 | 
						|
	if (cmd->resp_type & MMC_RSP_BUSY) {
 | 
						|
		timeout_msecs = 2000;
 | 
						|
		do {
 | 
						|
			status = readl(&mmchost->reg->status);
 | 
						|
			if (!timeout_msecs--) {
 | 
						|
				debug("busy timeout\n");
 | 
						|
				error = TIMEOUT;
 | 
						|
				goto out;
 | 
						|
			}
 | 
						|
			udelay(1000);
 | 
						|
		} while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY);
 | 
						|
	}
 | 
						|
 | 
						|
	if (cmd->resp_type & MMC_RSP_136) {
 | 
						|
		cmd->response[0] = readl(&mmchost->reg->resp3);
 | 
						|
		cmd->response[1] = readl(&mmchost->reg->resp2);
 | 
						|
		cmd->response[2] = readl(&mmchost->reg->resp1);
 | 
						|
		cmd->response[3] = readl(&mmchost->reg->resp0);
 | 
						|
		debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n",
 | 
						|
		      cmd->response[3], cmd->response[2],
 | 
						|
		      cmd->response[1], cmd->response[0]);
 | 
						|
	} else {
 | 
						|
		cmd->response[0] = readl(&mmchost->reg->resp0);
 | 
						|
		debug("mmc resp 0x%08x\n", cmd->response[0]);
 | 
						|
	}
 | 
						|
out:
 | 
						|
	if (error < 0) {
 | 
						|
		writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
 | 
						|
		mmc_update_clk(mmc);
 | 
						|
	}
 | 
						|
	writel(0xffffffff, &mmchost->reg->rint);
 | 
						|
	writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
 | 
						|
	       &mmchost->reg->gctrl);
 | 
						|
 | 
						|
	return error;
 | 
						|
}
 | 
						|
 | 
						|
static int sunxi_mmc_getcd(struct mmc *mmc)
 | 
						|
{
 | 
						|
	struct sunxi_mmc_host *mmchost = mmc->priv;
 | 
						|
	int cd_pin;
 | 
						|
 | 
						|
	cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no);
 | 
						|
	if (cd_pin < 0)
 | 
						|
		return 1;
 | 
						|
 | 
						|
	return !gpio_get_value(cd_pin);
 | 
						|
}
 | 
						|
 | 
						|
static const struct mmc_ops sunxi_mmc_ops = {
 | 
						|
	.send_cmd	= sunxi_mmc_send_cmd,
 | 
						|
	.set_ios	= sunxi_mmc_set_ios,
 | 
						|
	.init		= sunxi_mmc_core_init,
 | 
						|
	.getcd		= sunxi_mmc_getcd,
 | 
						|
};
 | 
						|
 | 
						|
struct mmc *sunxi_mmc_init(int sdc_no)
 | 
						|
{
 | 
						|
	struct mmc_config *cfg = &mmc_host[sdc_no].cfg;
 | 
						|
 | 
						|
	memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host));
 | 
						|
 | 
						|
	cfg->name = "SUNXI SD/MMC";
 | 
						|
	cfg->ops  = &sunxi_mmc_ops;
 | 
						|
 | 
						|
	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 | 
						|
	cfg->host_caps = MMC_MODE_4BIT;
 | 
						|
	cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 | 
						|
	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 | 
						|
 | 
						|
	cfg->f_min = 400000;
 | 
						|
	cfg->f_max = 52000000;
 | 
						|
 | 
						|
	if (mmc_resource_init(sdc_no) != 0)
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	mmc_clk_io_on(sdc_no);
 | 
						|
 | 
						|
	return mmc_create(cfg, &mmc_host[sdc_no]);
 | 
						|
}
 |