mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-10-01 10:41:49 +02:00
168068fb3d
Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
How to use U-Boot on Grinn's liteBoard -------------------------------------- - Build U-Boot for liteBoard: $ make mrproper $ make liteboard_defconfig $ make This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - Flash the u-boot.img image into the micro SD card: sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync - Jumper settings: S1: 0 1 0 1 1 1 where 0 means bottom position and 1 means top position (from the switch label numbers reference). - Insert the micro SD card in the board. - Connect USB cable between liteBoard and the PC for the power and console. - U-Boot messages should come up.