mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-12-24 02:42:18 +01:00
512c6b67a2
The phyCORE-i.MX 93 is available in various variants (e.g. different ram sizes, eMMC HS400 yes/no). Enable hardware introspection for the imx93-phyboard-segin_defconfig, so that during startup the SOM module variant can be detected, and the hardware can be configured accordingly. The resulting SPL and u-boot binary shall able to boot each phyCORE-i.MX 93 module variant on each carrier board. Finally rename imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight its SOM scope. Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de> Reviewed-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Yannic Moog <y.moog@phytec.de>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.