Suresh Gupta e2544e7a54 B4860QDS: Enable enet port as per fsl_b4860_serdes2 string in hwconfig ...

In B4860QDS board SerDes2 lanes EFGH either go to SFP or AMC riser card
slot2 so either DTSEC3/DTSEC4 or TGEC1/TGEC2 should be accessible. This
Patch enables DTSEC3/DTSEC4 or TGEC1/TGEC2 on bases of user specified
string fsl_b4860_serdes2:sfp_amc=amc or fsl_b4860_serdes2:sfp_amc=sfp
respectively in hwconfig.

Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

2014-12-05 08:06:14 -08:00

..

b4_pbi.cfg

board/b4860qds:Slow MDC clock to comply IEEE specs in PBI config

2014-04-22 17:58:47 -07:00

b4_rcw.cfg

powerpc/b4860/pbl: fix rcw cfg

2014-01-02 14:10:14 -08:00

b4860qds_crossbar_con.h

board/b4860qds: Add support to make Aurora work on B4860QDS

2014-03-07 14:49:16 -08:00

b4860qds_qixis.h

SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode

2013-10-16 16:13:11 -07:00

b4860qds.c

powerpc/b4860qds: add workaround for XFI

2014-12-05 08:06:13 -08:00

b4860qds.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

ddr.c

board/b4qds:Add support of 2 stage NAND boot-loader

2014-04-22 17:58:51 -07:00

eth_b4860qds.c

B4860QDS: Enable enet port as per fsl_b4860_serdes2 string in hwconfig

2014-12-05 08:06:14 -08:00

Kconfig

kconfig: remove redundant "string" type in arch and board Kconfigs

2014-09-13 16:43:55 -04:00

law.c

powerpc/b4860: Enable law creation of MAPLE

2014-12-05 08:06:12 -08:00

MAINTAINERS

MAINTAINERS: comment out blank M: field

2014-09-24 18:30:28 -04:00

Makefile

board/b4qds:Add support of 2 stage NAND boot-loader

2014-04-22 17:58:51 -07:00

pci.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

spl.c

board/b4qds:Add support of 2 stage NAND boot-loader

2014-04-22 17:58:51 -07:00

tlb.c

board/b4qds:Add support of 2 stage NAND boot-loader

2014-04-22 17:58:51 -07:00