mirror of
				https://source.denx.de/u-boot/u-boot.git
				synced 2025-11-04 02:11:25 +01:00 
			
		
		
		
	This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
		
			
				
	
	
		
			348 lines
		
	
	
		
			7.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			348 lines
		
	
	
		
			7.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0+
 | 
						|
/*
 | 
						|
 * (C) Copyright 2020
 | 
						|
 * Arthur Li, Cortina Access, arthur.li@cortina-access.com.
 | 
						|
 */
 | 
						|
 | 
						|
#include <common.h>
 | 
						|
#include <i2c.h>
 | 
						|
#include <log.h>
 | 
						|
#include <asm/io.h>
 | 
						|
#include <dm.h>
 | 
						|
#include <mapmem.h>
 | 
						|
#include "i2c-cortina.h"
 | 
						|
 | 
						|
static void set_speed(struct i2c_regs *regs, int i2c_spd)
 | 
						|
{
 | 
						|
	union ca_biw_cfg i2c_cfg;
 | 
						|
 | 
						|
	i2c_cfg.wrd = readl(®s->i2c_cfg);
 | 
						|
	i2c_cfg.bf.core_en = 0;
 | 
						|
	writel(i2c_cfg.wrd, ®s->i2c_cfg);
 | 
						|
 | 
						|
	switch (i2c_spd) {
 | 
						|
	case IC_SPEED_MODE_FAST_PLUS:
 | 
						|
		i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
 | 
						|
				  (5 * I2C_SPEED_FAST_PLUS_RATE) - 1;
 | 
						|
		break;
 | 
						|
 | 
						|
	case IC_SPEED_MODE_STANDARD:
 | 
						|
		i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
 | 
						|
				  (5 * I2C_SPEED_STANDARD_RATE) - 1;
 | 
						|
		break;
 | 
						|
 | 
						|
	case IC_SPEED_MODE_FAST:
 | 
						|
	default:
 | 
						|
		i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
 | 
						|
				  (5 * I2C_SPEED_FAST_RATE) - 1;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	i2c_cfg.bf.core_en = 1;
 | 
						|
	writel(i2c_cfg.wrd, ®s->i2c_cfg);
 | 
						|
}
 | 
						|
 | 
						|
static int ca_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
 | 
						|
{
 | 
						|
	struct ca_i2c *priv = dev_get_priv(bus);
 | 
						|
	int i2c_spd;
 | 
						|
 | 
						|
	if (speed >= I2C_SPEED_FAST_PLUS_RATE) {
 | 
						|
		i2c_spd = IC_SPEED_MODE_FAST_PLUS;
 | 
						|
		priv->speed = I2C_SPEED_FAST_PLUS_RATE;
 | 
						|
	} else if (speed >= I2C_SPEED_FAST_RATE) {
 | 
						|
		i2c_spd = IC_SPEED_MODE_FAST;
 | 
						|
		priv->speed = I2C_SPEED_FAST_RATE;
 | 
						|
	} else {
 | 
						|
		i2c_spd = IC_SPEED_MODE_STANDARD;
 | 
						|
		priv->speed = I2C_SPEED_STANDARD_RATE;
 | 
						|
	}
 | 
						|
 | 
						|
	set_speed(priv->regs, i2c_spd);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ca_i2c_get_bus_speed(struct udevice *bus)
 | 
						|
{
 | 
						|
	struct ca_i2c *priv = dev_get_priv(bus);
 | 
						|
 | 
						|
	return priv->speed;
 | 
						|
}
 | 
						|
 | 
						|
static void ca_i2c_init(struct i2c_regs *regs)
 | 
						|
{
 | 
						|
	union ca_biw_cfg i2c_cfg;
 | 
						|
 | 
						|
	i2c_cfg.wrd = readl(®s->i2c_cfg);
 | 
						|
	i2c_cfg.bf.core_en = 0;
 | 
						|
	i2c_cfg.bf.biw_soft_reset = 1;
 | 
						|
	writel(i2c_cfg.wrd, ®s->i2c_cfg);
 | 
						|
	mdelay(10);
 | 
						|
	i2c_cfg.bf.biw_soft_reset = 0;
 | 
						|
	writel(i2c_cfg.wrd, ®s->i2c_cfg);
 | 
						|
 | 
						|
	set_speed(regs, IC_SPEED_MODE_STANDARD);
 | 
						|
 | 
						|
	i2c_cfg.wrd = readl(®s->i2c_cfg);
 | 
						|
	i2c_cfg.bf.core_en = 1;
 | 
						|
	writel(i2c_cfg.wrd, ®s->i2c_cfg);
 | 
						|
}
 | 
						|
 | 
						|
static int i2c_wait_complete(struct i2c_regs *regs)
 | 
						|
{
 | 
						|
	union ca_biw_ctrl i2c_ctrl;
 | 
						|
	unsigned long start_time_bb = get_timer(0);
 | 
						|
 | 
						|
	i2c_ctrl.wrd = readl(®s->i2c_ctrl);
 | 
						|
 | 
						|
	while (i2c_ctrl.bf.biwdone == 0) {
 | 
						|
		i2c_ctrl.wrd = readl(®s->i2c_ctrl);
 | 
						|
 | 
						|
		if (get_timer(start_time_bb) >
 | 
						|
		   (unsigned long)(I2C_BYTE_TO_BB)) {
 | 
						|
			printf("%s not done!!!\n", __func__);
 | 
						|
			return -ETIMEDOUT;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Clear done bit */
 | 
						|
	writel(i2c_ctrl.wrd, ®s->i2c_ctrl);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void i2c_setaddress(struct i2c_regs *regs, unsigned int i2c_addr,
 | 
						|
			   int write_read)
 | 
						|
{
 | 
						|
	writel(i2c_addr | write_read, ®s->i2c_txr);
 | 
						|
 | 
						|
	writel(BIW_CTRL_START | BIW_CTRL_WRITE,
 | 
						|
	       ®s->i2c_ctrl);
 | 
						|
 | 
						|
	i2c_wait_complete(regs);
 | 
						|
}
 | 
						|
 | 
						|
static int i2c_wait_for_bus_busy(struct i2c_regs *regs)
 | 
						|
{
 | 
						|
	union ca_biw_ack i2c_ack;
 | 
						|
	unsigned long start_time_bb = get_timer(0);
 | 
						|
 | 
						|
	i2c_ack.wrd = readl(®s->i2c_ack);
 | 
						|
 | 
						|
	while (i2c_ack.bf.biw_busy) {
 | 
						|
		i2c_ack.wrd = readl(®s->i2c_ack);
 | 
						|
 | 
						|
		if (get_timer(start_time_bb) >
 | 
						|
		   (unsigned long)(I2C_BYTE_TO_BB)) {
 | 
						|
			printf("%s: timeout!\n", __func__);
 | 
						|
			return -ETIMEDOUT;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i2c_xfer_init(struct i2c_regs *regs, uint8_t chip, uint addr,
 | 
						|
			 int alen, int write_read)
 | 
						|
{
 | 
						|
	int addr_len = alen;
 | 
						|
 | 
						|
	if (i2c_wait_for_bus_busy(regs))
 | 
						|
		return 1;
 | 
						|
 | 
						|
	/* First cycle must write addr + offset */
 | 
						|
	chip = ((chip & 0x7F) << 1);
 | 
						|
	if (alen == 0 && write_read == I2C_CMD_RD)
 | 
						|
		i2c_setaddress(regs, chip, I2C_CMD_RD);
 | 
						|
	else
 | 
						|
		i2c_setaddress(regs, chip, I2C_CMD_WT);
 | 
						|
 | 
						|
	while (alen) {
 | 
						|
		alen--;
 | 
						|
		writel(addr, ®s->i2c_txr);
 | 
						|
		if (write_read == I2C_CMD_RD)
 | 
						|
			writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
 | 
						|
			       ®s->i2c_ctrl);
 | 
						|
		else
 | 
						|
			writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
 | 
						|
		i2c_wait_complete(regs);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Send address again with Read flag if it's read command */
 | 
						|
	if (write_read == I2C_CMD_RD && addr_len > 0)
 | 
						|
		i2c_setaddress(regs, chip, I2C_CMD_RD);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i2c_xfer_finish(struct i2c_regs *regs)
 | 
						|
{
 | 
						|
	/* Dummy read makes bus free */
 | 
						|
	writel(BIW_CTRL_READ | BIW_CTRL_STOP, ®s->i2c_ctrl);
 | 
						|
	i2c_wait_complete(regs);
 | 
						|
 | 
						|
	if (i2c_wait_for_bus_busy(regs)) {
 | 
						|
		printf("Timed out waiting for bus\n");
 | 
						|
		return -ETIMEDOUT;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ca_i2c_read(struct i2c_regs *regs, uint8_t chip, uint addr,
 | 
						|
		       int alen, uint8_t *buffer, int len)
 | 
						|
{
 | 
						|
	unsigned long start_time_rx;
 | 
						|
	int rc = 0;
 | 
						|
 | 
						|
	rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_RD);
 | 
						|
	if (rc)
 | 
						|
		return rc;
 | 
						|
 | 
						|
	start_time_rx = get_timer(0);
 | 
						|
	while (len) {
 | 
						|
		/* ACK_IN is ack value to send during read.
 | 
						|
		 * ack high only on the very last byte!
 | 
						|
		 */
 | 
						|
		if (len == 1)
 | 
						|
			writel(BIW_CTRL_READ | BIW_CTRL_ACK_IN | BIW_CTRL_STOP,
 | 
						|
			       ®s->i2c_ctrl);
 | 
						|
		else
 | 
						|
			writel(BIW_CTRL_READ, ®s->i2c_ctrl);
 | 
						|
 | 
						|
		rc = i2c_wait_complete(regs);
 | 
						|
		udelay(1);
 | 
						|
 | 
						|
		if (rc == 0) {
 | 
						|
			*buffer++ =
 | 
						|
				(uchar) readl(®s->i2c_rxr);
 | 
						|
			len--;
 | 
						|
			start_time_rx = get_timer(0);
 | 
						|
 | 
						|
		} else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
 | 
						|
			return -ETIMEDOUT;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	i2c_xfer_finish(regs);
 | 
						|
	return rc;
 | 
						|
}
 | 
						|
 | 
						|
static int ca_i2c_write(struct i2c_regs *regs, uint8_t chip, uint addr,
 | 
						|
			int alen, uint8_t *buffer, int len)
 | 
						|
{
 | 
						|
	int rc, nb = len;
 | 
						|
	unsigned long start_time_tx;
 | 
						|
 | 
						|
	rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_WT);
 | 
						|
	if (rc)
 | 
						|
		return rc;
 | 
						|
 | 
						|
	start_time_tx = get_timer(0);
 | 
						|
	while (len) {
 | 
						|
		writel(*buffer, ®s->i2c_txr);
 | 
						|
		if (len == 1)
 | 
						|
			writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
 | 
						|
			       ®s->i2c_ctrl);
 | 
						|
		else
 | 
						|
			writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
 | 
						|
 | 
						|
		rc = i2c_wait_complete(regs);
 | 
						|
 | 
						|
		if (rc == 0) {
 | 
						|
			len--;
 | 
						|
			buffer++;
 | 
						|
			start_time_tx = get_timer(0);
 | 
						|
		} else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
 | 
						|
			return -ETIMEDOUT;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ca_i2c_probe_chip(struct udevice *bus, uint chip_addr,
 | 
						|
			     uint chip_flags)
 | 
						|
{
 | 
						|
	struct ca_i2c *priv = dev_get_priv(bus);
 | 
						|
	int ret;
 | 
						|
	u32 tmp;
 | 
						|
 | 
						|
	/* Try to read the first location of the chip */
 | 
						|
	ret = ca_i2c_read(priv->regs, chip_addr, 0, 1, (uchar *)&tmp, 1);
 | 
						|
	if (ret)
 | 
						|
		ca_i2c_init(priv->regs);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ca_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
 | 
						|
{
 | 
						|
	struct ca_i2c *priv = dev_get_priv(bus);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	debug("i2c_xfer: %d messages\n", nmsgs);
 | 
						|
	for (; nmsgs > 0; nmsgs--, msg++) {
 | 
						|
		debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
 | 
						|
		if (msg->flags & I2C_M_RD)
 | 
						|
			ret = ca_i2c_read(priv->regs, msg->addr, 0, 0,
 | 
						|
					  msg->buf, msg->len);
 | 
						|
		else
 | 
						|
			ret = ca_i2c_write(priv->regs, msg->addr, 0, 0,
 | 
						|
					   msg->buf, msg->len);
 | 
						|
 | 
						|
		if (ret) {
 | 
						|
			printf("i2c_xfer: %s error\n",
 | 
						|
			       msg->flags & I2C_M_RD ? "read" : "write");
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct dm_i2c_ops ca_i2c_ops = {
 | 
						|
	.xfer		= ca_i2c_xfer,
 | 
						|
	.probe_chip	= ca_i2c_probe_chip,
 | 
						|
	.set_bus_speed	= ca_i2c_set_bus_speed,
 | 
						|
	.get_bus_speed	= ca_i2c_get_bus_speed,
 | 
						|
};
 | 
						|
 | 
						|
static const struct udevice_id ca_i2c_ids[] = {
 | 
						|
	{ .compatible = "cortina,ca-i2c", },
 | 
						|
	{ }
 | 
						|
};
 | 
						|
 | 
						|
static int ca_i2c_probe(struct udevice *bus)
 | 
						|
{
 | 
						|
	struct ca_i2c *priv = dev_get_priv(bus);
 | 
						|
 | 
						|
	ca_i2c_init(priv->regs);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ca_i2c_of_to_plat(struct udevice *bus)
 | 
						|
{
 | 
						|
	struct ca_i2c *priv = dev_get_priv(bus);
 | 
						|
 | 
						|
	priv->regs = map_sysmem(dev_read_addr(bus), sizeof(struct i2c_regs));
 | 
						|
	if (!priv->regs) {
 | 
						|
		printf("I2C: base address is invalid\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
U_BOOT_DRIVER(i2c_cortina) = {
 | 
						|
	.name	= "i2c_cortina",
 | 
						|
	.id	= UCLASS_I2C,
 | 
						|
	.of_match = ca_i2c_ids,
 | 
						|
	.of_to_plat = ca_i2c_of_to_plat,
 | 
						|
	.probe	= ca_i2c_probe,
 | 
						|
	.priv_auto	= sizeof(struct ca_i2c),
 | 
						|
	.ops	= &ca_i2c_ops,
 | 
						|
	.flags  = DM_FLAG_PRE_RELOC,
 | 
						|
};
 |