Tom Rini
1f47e2aca4
Xilinx changes for v2020.07
common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code
xilinx:
- Enable netconsole
Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE
Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver
ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3
Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR
Drivers:
- Gem:
- Flush memory after freeing
- Handle mdio bus separately
- Watchdog:
- Get rid of unused global data pointer
- Enable window watchdog timer
- Serial:
- Change reinitialization logic in zynq serial driver
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXoxw9wAKCRDKSWXLKUoM
IbQxAKCK23yTy4FoN8oTGTYsbmLOA9kVUQCbBx8lg4nBeA8ihSaAnY+HMDF37YI=
=Lg54
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next
Xilinx changes for v2020.07
common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code
xilinx:
- Enable netconsole
Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE
Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver
ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3
Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR
Drivers:
- Gem:
- Flush memory after freeing
- Handle mdio bus separately
- Watchdog:
- Get rid of unused global data pointer
- Enable window watchdog timer
- Serial:
- Change reinitialization logic in zynq serial driver
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-07 17:13:35 -04:00
..
2019-04-22 12:06:39 -04:00
2020-01-17 14:02:35 -05:00
2019-04-22 12:06:39 -04:00
2020-01-17 14:02:35 -05:00
2019-12-15 11:44:19 +08:00
2017-02-08 15:56:28 -05:00
2019-07-24 13:16:29 -04:00
2020-02-04 09:07:24 +05:30
2019-01-15 15:28:54 -05:00
2020-01-10 14:18:26 -05:00
2020-01-17 10:15:49 -05:00
2018-05-07 09:34:12 -04:00
2019-10-31 07:22:53 -04:00
2018-08-11 09:16:08 +02:00
2019-07-24 13:16:29 -04:00
2020-01-07 11:13:26 -05:00
2017-07-03 17:35:28 -04:00
2018-08-21 16:21:37 +02:00
2019-08-11 16:43:41 -04:00
2020-01-16 09:39:45 -05:00
2018-05-07 09:34:12 -04:00
2019-08-11 16:43:41 -04:00
2020-01-17 14:02:35 -05:00
2018-05-07 09:34:12 -04:00
2018-05-23 17:30:05 -04:00
2020-03-28 10:45:03 +01:00
2020-01-17 14:02:35 -05:00
2020-01-17 14:02:35 -05:00
2019-08-11 16:43:41 -04:00
2018-05-07 09:34:12 -04:00
2020-01-17 14:02:35 -05:00
2018-05-07 09:34:12 -04:00
2019-12-02 18:23:55 -05:00
2019-08-18 21:54:10 +08:00
2019-08-22 00:10:09 +02:00
2018-12-04 19:44:57 +01:00
2019-08-11 16:43:41 -04:00
2018-09-25 21:49:18 -04:00
2018-05-07 09:34:12 -04:00
2018-05-07 09:34:12 -04:00
2020-01-17 14:02:35 -05:00
2018-10-09 04:40:27 -06:00
2018-05-07 09:34:12 -04:00
2019-02-19 08:55:43 -05:00
2018-05-07 09:34:12 -04:00
2020-01-07 14:37:50 +01:00
2018-05-07 09:34:12 -04:00
2020-01-17 14:02:35 -05:00
2020-02-05 19:33:46 -07:00
2018-05-07 09:34:12 -04:00
2020-01-10 14:18:26 -05:00
2019-12-02 18:23:08 -05:00
2020-03-28 10:45:03 +01:00
2020-03-03 13:08:14 +05:30
2019-12-09 09:47:41 -06:00
2018-05-07 09:34:12 -04:00
2018-05-07 09:34:12 -04:00
2018-05-07 09:34:12 -04:00
2019-03-16 13:29:43 +01:00
2020-01-17 13:26:49 -05:00
2019-08-11 16:43:41 -04:00
2018-05-07 09:34:12 -04:00
2018-05-07 09:34:12 -04:00
2019-08-11 16:43:41 -04:00
2018-05-07 09:34:12 -04:00
2018-05-07 09:34:12 -04:00
2019-06-20 22:26:20 +00:00
2018-05-07 09:34:12 -04:00
2018-05-07 09:34:12 -04:00
2020-03-13 09:30:30 -04:00
2020-02-05 19:33:46 -07:00
2018-05-07 09:34:12 -04:00
2019-07-29 09:32:09 -04:00
2020-02-05 19:33:46 -07:00
2019-12-02 18:23:08 -05:00
2019-08-11 19:27:41 -04:00
2019-08-11 16:43:41 -04:00
2019-10-08 13:57:44 +08:00
2018-06-18 14:02:04 -04:00
2019-12-02 18:25:01 -05:00
2019-10-11 19:05:14 -04:00
2020-01-17 14:02:35 -05:00
2020-03-03 13:08:14 +05:30
2019-06-21 10:07:11 -04:00
2018-05-07 09:34:12 -04:00
2019-12-04 17:10:51 -05:00
2019-12-04 17:10:51 -05:00
2019-08-11 16:43:41 -04:00
2020-01-17 14:02:35 -05:00
2018-05-07 09:34:12 -04:00
2019-08-11 16:43:41 -04:00
2018-05-07 09:34:12 -04:00
2020-02-04 09:07:24 +05:30
2019-08-11 16:43:41 -04:00
2019-09-04 11:37:18 -05:00
2020-02-09 14:58:08 +01:00
2018-05-07 09:34:12 -04:00
2019-07-15 13:32:25 -05:00
2018-05-07 09:34:12 -04:00
2020-03-31 10:06:52 -04:00
2019-12-02 18:23:06 -05:00
2020-02-05 19:33:46 -07:00
2019-11-07 18:01:13 -05:00
2020-01-17 14:02:35 -05:00
2020-01-17 14:02:35 -05:00
2019-10-30 17:49:41 +01:00
2019-12-09 09:47:41 -06:00
2018-05-07 09:34:12 -04:00
2016-10-06 20:57:42 -04:00
2018-09-28 18:27:33 +02:00
2019-10-04 12:21:23 -04:00
2019-09-04 11:37:19 -05:00
2019-08-26 11:46:28 -04:00
2019-07-12 11:50:57 +02:00
2019-12-15 11:44:11 +08:00
2020-01-27 19:54:20 -05:00
2020-01-22 17:49:25 -05:00
2019-12-06 16:44:18 -05:00
2020-01-17 13:26:49 -05:00
2019-08-11 16:43:41 -04:00
2017-08-20 09:54:30 -04:00
2018-05-07 09:34:12 -04:00
2018-06-07 20:06:29 -04:00
2020-01-17 14:02:35 -05:00
2019-07-26 21:49:24 -04:00
2020-02-05 19:33:46 -07:00
2019-05-01 00:00:05 +02:00
2020-01-27 19:54:20 -05:00
2018-11-26 08:25:37 -05:00
2018-05-07 09:34:12 -04:00
2019-08-11 16:43:41 -04:00
2019-12-04 17:10:51 -05:00
2018-05-07 09:34:12 -04:00
2018-05-08 09:07:35 -04:00
2018-12-13 16:36:41 -07:00
2020-01-17 14:02:35 -05:00
2020-01-27 22:27:21 +05:30
2019-08-11 16:43:41 -04:00
2016-01-25 10:39:43 -05:00
2019-12-06 16:44:19 -05:00
2018-05-07 09:34:12 -04:00
2019-10-11 15:33:27 -04:00
2019-10-31 12:12:31 +01:00
2018-05-07 09:34:12 -04:00
2020-01-21 15:56:15 +01:00
2020-01-17 14:02:31 -05:00
2020-02-05 19:33:46 -07:00
2020-02-05 19:33:46 -07:00
2020-02-05 19:33:46 -07:00
2020-02-05 19:33:46 -07:00
2019-08-11 16:43:41 -04:00
2018-05-07 09:34:12 -04:00
2020-02-05 19:33:46 -07:00
2018-09-28 20:22:32 -04:00
2019-10-23 20:47:12 -04:00
2018-05-07 09:34:12 -04:00
2019-08-11 16:43:41 -04:00
2019-06-14 12:39:50 +02:00
2020-02-05 19:33:46 -07:00
2019-04-09 13:11:45 +02:00
2018-05-07 09:34:12 -04:00
2018-11-14 09:16:27 -08:00
2018-09-28 20:22:36 -04:00
2019-04-12 07:04:18 +02:00
2018-07-02 14:14:20 -05:00
2020-02-05 19:33:46 -07:00
2016-01-25 10:39:43 -05:00
2020-01-23 07:29:58 -05:00
2019-08-11 16:43:41 -04:00