mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-09-28 09:11:34 +02:00
4773e9d5ed
Rockchip SoCs typically use U-Boot TPL to initialize DRAM, then jumps back to BootRom to load next stage, U-Boot SPL, into DRAM. BootRom then jumps to U-Boot SPL to continue the normal boot flow. However, there is no support to initialize DRAM on RK35xx SoCs using U-Boot TPL and instead an external TPL binary must be used to generate a bootable u-boot-rockchip.bin image. Add CONFIG_ROCKCHIP_EXTERNAL_TPL to indicate that an external TPL should be used. Build U-Boot with ROCKCHIP_TPL=/path/to/ddr.bin to generate a bootable u-boot-rockchip.bin image for RK3568. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Eugen Hristev <eugen.hristev@collabora.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.