u-boot/drivers/pci/pcie_dw_imx.c
Tom Rini d81c111858 Merge tag 'u-boot-imx-next-20250922' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/27684

- Add i.MX8 ahab-commit command.
- Add support for flashing board with UUU on imx93_frdm.
- Fix the acces of PFUZE100 regulator desc.
- Add more i.MX6 PWM clock definitions.
- Enable OP-TEE on phytec-imx8m and update documentation.
- Enable PCI host controller on iMX95 19x19 EVK.

[trini: Fixup spacing issues]
Signed-off-by: Tom Rini <trini@konsulko.com>
2025-09-22 09:57:39 -06:00

678 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2024 Linaro Ltd.
* Copyright 2025 NXP
*
* Author: Sumit Garg <sumit.garg@linaro.org>
*/
#include <asm/io.h>
#include <asm-generic/gpio.h>
#include <clk.h>
#include <dm.h>
#include <dm/device_compat.h>
#include <generic-phy.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/iopoll.h>
#include <log.h>
#include <pci.h>
#include <power/regulator.h>
#include <regmap.h>
#include <reset.h>
#include <syscon.h>
#include <time.h>
#include "pcie_dw_common.h"
#define PCIE_LINK_CAPABILITY 0x7c
#define TARGET_LINK_SPEED_MASK 0xf
#define LINK_SPEED_GEN_1 0x1
#define LINK_SPEED_GEN_2 0x2
#define LINK_SPEED_GEN_3 0x3
#define PCIE_MISC_CONTROL_1_OFF 0x8bc
#define PCIE_DBI_RO_WR_EN BIT(0)
#define PCIE_PORT_DEBUG0 0x728
#define PCIE_PORT_DEBUG1 0x72c
#define PCIE_PORT_DEBUG1_LINK_UP BIT(4)
#define PCIE_PORT_DEBUG1_LINK_IN_TRAINING BIT(29)
#define PCIE_LINK_UP_TIMEOUT_MS 100
#define IOMUXC_GPR14_OFFSET 0x38
#define IMX8M_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10)
#define IMX8M_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
#define IMX95_PCIE_PHY_GEN_CTRL 0x0
#define IMX95_PCIE_REF_USE_PAD BIT(17)
#define IMX95_PCIE_PHY_MPLLA_CTRL 0x10
#define IMX95_PCIE_PHY_MPLL_STATE BIT(30)
#define IMX95_PCIE_SS_RW_REG_0 0xf0
#define IMX95_PCIE_REF_CLKEN BIT(23)
#define IMX95_PCIE_PHY_CR_PARA_SEL BIT(9)
#define IMX95_PCIE_SS_RW_REG_1 0xf4
#define IMX95_PCIE_CLKREQ_OVERRIDE_EN BIT(8)
#define IMX95_PCIE_CLKREQ_OVERRIDE_VAL BIT(9)
#define IMX95_PCIE_SYS_AUX_PWR_DET BIT(31)
#define IMX95_PE0_GEN_CTRL_1 0x1050
#define IMX95_PCIE_DEVICE_TYPE GENMASK(3, 0)
#define IMX95_PE0_GEN_CTRL_3 0x1058
#define IMX95_PCIE_LTSSM_EN BIT(0)
#define IMX95_PCIE_RST_CTRL 0x3010
#define IMX95_PCIE_COLD_RST BIT(0)
#define GEN3_RELATED_OFF 0x890
#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0)
#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13)
#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16)
#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24
#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24)
#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT 0x1
#define IMX_PCIE_FLAG_HAS_PHYDRV BIT(3)
#define IMX_PCIE_FLAG_HAS_APP_RESET BIT(4)
#define IMX_PCIE_FLAG_HAS_SERDES BIT(6)
#define IMX_PCIE_MAX_INSTANCES 2
/* Parameters for the waiting for PCIe PHY PLL to lock s*/
#define PHY_PLL_LOCK_WAIT_USLEEP_MAX 200
#define PHY_PLL_LOCK_WAIT_TIMEOUT (2000 * PHY_PLL_LOCK_WAIT_USLEEP_MAX / 1000)
struct pcie_dw_imx {
/* Must be first member of the struct */
struct pcie_dw dw;
struct regmap *iomuxc_gpr;
struct clk_bulk clks;
struct gpio_desc reset_gpio;
struct reset_ctl apps_reset;
struct phy phy;
struct udevice *vpcie;
void *info;
u32 max_link_speed;
bool enable_ext_refclk;
bool supports_clkreq;
};
struct pcie_chip_info {
u32 flags;
const u32 ltssm_off;
const u32 ltssm_mask;
const u32 mode_off[IMX_PCIE_MAX_INSTANCES];
const u32 mode_mask[IMX_PCIE_MAX_INSTANCES];
const char *gpr;
void (*init_phy)(struct pcie_dw_imx *priv);
int (*enable_ref_clk)(struct pcie_dw_imx *priv, bool enable);
int (*core_reset)(struct pcie_dw_imx *priv, bool assert);
int (*wait_pll_lock)(struct pcie_dw_imx *priv);
void (*post_config)(struct pcie_dw_imx *priv);
};
static void imx95_pcie_init_phy(struct pcie_dw_imx *priv)
{
/*
* Workaround for ERR051624: The Controller Without Vaux Cannot
* Exit L23 Ready Through Beacon or PERST# De-assertion
*
* When the auxiliary power is not available the controller
* cannot exit from L23 Ready with beacon or PERST# de-assertion
* when main power is not removed.
*
* Workaround: Set SS_RW_REG_1[SYS_AUX_PWR_DET] to 1.
*/
regmap_update_bits(priv->iomuxc_gpr, IMX95_PCIE_SS_RW_REG_1,
IMX95_PCIE_SYS_AUX_PWR_DET,
IMX95_PCIE_SYS_AUX_PWR_DET);
regmap_update_bits(priv->iomuxc_gpr, IMX95_PCIE_SS_RW_REG_0,
IMX95_PCIE_PHY_CR_PARA_SEL,
IMX95_PCIE_PHY_CR_PARA_SEL);
if (priv->enable_ext_refclk) {
/* External clock is used as reference clock */
regmap_update_bits(priv->iomuxc_gpr, IMX95_PCIE_PHY_GEN_CTRL,
IMX95_PCIE_REF_USE_PAD,
IMX95_PCIE_REF_USE_PAD);
regmap_update_bits(priv->iomuxc_gpr, IMX95_PCIE_SS_RW_REG_0,
IMX95_PCIE_REF_CLKEN, 0);
} else {
regmap_update_bits(priv->iomuxc_gpr, IMX95_PCIE_PHY_GEN_CTRL,
IMX95_PCIE_REF_USE_PAD, 0);
regmap_update_bits(priv->iomuxc_gpr, IMX95_PCIE_SS_RW_REG_0,
IMX95_PCIE_REF_CLKEN, IMX95_PCIE_REF_CLKEN);
}
/* Force CLKREQ# low by override */
if (!priv->supports_clkreq)
regmap_update_bits(priv->iomuxc_gpr,
IMX95_PCIE_SS_RW_REG_1,
IMX95_PCIE_CLKREQ_OVERRIDE_EN |
IMX95_PCIE_CLKREQ_OVERRIDE_VAL,
IMX95_PCIE_CLKREQ_OVERRIDE_EN |
IMX95_PCIE_CLKREQ_OVERRIDE_VAL);
}
static int imx95_pcie_wait_for_phy_pll_lock(struct pcie_dw_imx *priv)
{
u32 val;
if (regmap_read_poll_timeout(priv->iomuxc_gpr,
IMX95_PCIE_PHY_MPLLA_CTRL, val,
val & IMX95_PCIE_PHY_MPLL_STATE,
PHY_PLL_LOCK_WAIT_USLEEP_MAX,
PHY_PLL_LOCK_WAIT_TIMEOUT)) {
printf("PCIe PLL lock timeout\n");
return -ETIMEDOUT;
}
return 0;
}
static int imx95_pcie_core_reset(struct pcie_dw_imx *priv, bool assert)
{
u32 val;
if (assert) {
/*
* From i.MX95 PCIe PHY perspective, the COLD reset toggle
* should be complete after power-up by the following sequence.
* > 10us(at power-up)
* > 10ns(warm reset)
* |<------------>|
* ______________
* phy_reset ____/ \________________
* ____________
* ref_clk_en_______________________/
* Toggle COLD reset aligned with this sequence for i.MX95 PCIe.
*/
regmap_update_bits(priv->iomuxc_gpr, IMX95_PCIE_RST_CTRL,
IMX95_PCIE_COLD_RST, IMX95_PCIE_COLD_RST);
/*
* Make sure the write to IMX95_PCIE_RST_CTRL is flushed to the
* hardware by doing a read. Otherwise, there is no guarantee
* that the write has reached the hardware before udelay().
*/
regmap_read(priv->iomuxc_gpr, IMX95_PCIE_RST_CTRL, &val);
udelay(15);
regmap_update_bits(priv->iomuxc_gpr, IMX95_PCIE_RST_CTRL,
IMX95_PCIE_COLD_RST, 0);
regmap_read(priv->iomuxc_gpr, IMX95_PCIE_RST_CTRL, &val);
udelay(10);
}
return 0;
}
static void imx95_pcie_post_config(struct pcie_dw_imx *priv)
{
u32 val;
/*
* Workaround for ERR051586: Compliance with 8GT/s Receiver
* Impedance ECN
*
* The default value of GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] is
* 1 which makes receiver non-compliant with the ZRX-DC
* parameter for 2.5 GT/s when operating at 8 GT/s or higher. It
* causes unnecessary timeout in L1.
*
* Workaround: Program GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] to 0.
*/
dw_pcie_dbi_write_enable(&priv->dw, true);
val = readl(priv->dw.dbi_base + GEN3_RELATED_OFF);
val &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
writel(val, priv->dw.dbi_base + GEN3_RELATED_OFF);
dw_pcie_dbi_write_enable(&priv->dw, false);
}
static int imx8mm_pcie_enable_ref_clk(struct pcie_dw_imx *priv, bool enable)
{
regmap_update_bits(priv->iomuxc_gpr, IOMUXC_GPR14_OFFSET,
IMX8M_GPR_PCIE_CLK_REQ_OVERRIDE,
enable ? 0 : IMX8M_GPR_PCIE_CLK_REQ_OVERRIDE);
regmap_update_bits(priv->iomuxc_gpr, IOMUXC_GPR14_OFFSET,
IMX8M_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
enable ? IMX8M_GPR_PCIE_CLK_REQ_OVERRIDE_EN : 0);
return 0;
}
static const struct pcie_chip_info imx8mm_chip_info = {
.flags = IMX_PCIE_FLAG_HAS_APP_RESET | IMX_PCIE_FLAG_HAS_PHYDRV,
.gpr = "fsl,imx8mm-iomuxc-gpr",
.enable_ref_clk = imx8mm_pcie_enable_ref_clk,
};
static const struct pcie_chip_info imx8mp_chip_info = {
.flags = IMX_PCIE_FLAG_HAS_APP_RESET | IMX_PCIE_FLAG_HAS_PHYDRV,
.gpr = "fsl,imx8mp-iomuxc-gpr",
.enable_ref_clk = imx8mm_pcie_enable_ref_clk,
};
static const struct pcie_chip_info imx95_chip_info = {
.flags = IMX_PCIE_FLAG_HAS_SERDES,
.ltssm_off = IMX95_PE0_GEN_CTRL_3,
.ltssm_mask = IMX95_PCIE_LTSSM_EN,
.mode_off[0] = IMX95_PE0_GEN_CTRL_1,
.mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
.init_phy = imx95_pcie_init_phy,
.core_reset = imx95_pcie_core_reset,
.wait_pll_lock = imx95_pcie_wait_for_phy_pll_lock,
.post_config = imx95_pcie_post_config,
};
static void imx_pcie_configure_type(struct pcie_dw_imx *priv)
{
struct pcie_chip_info *info = (struct pcie_chip_info *)(priv->info);
unsigned int mask, val, mode;
mode = PCI_EXP_TYPE_ROOT_PORT;
/* If mode_mask is 0, then generic PHY driver is used to set the mode */
if (!info->mode_mask[0])
return;
mask = info->mode_mask[0];
val = mode << (ffs(mask) - 1);
regmap_update_bits(priv->iomuxc_gpr, info->mode_off[0], mask, val);
}
static void pcie_dw_configure(struct pcie_dw_imx *priv, u32 cap_speed)
{
dw_pcie_dbi_write_enable(&priv->dw, true);
clrsetbits_le32(priv->dw.dbi_base + PCIE_LINK_CAPABILITY,
TARGET_LINK_SPEED_MASK, cap_speed);
clrsetbits_le32(priv->dw.dbi_base + PCIE_LINK_CTL_2,
TARGET_LINK_SPEED_MASK, cap_speed);
dw_pcie_dbi_write_enable(&priv->dw, false);
}
static void imx_pcie_ltssm_enable(struct pcie_dw_imx *priv)
{
struct pcie_chip_info *info = (struct pcie_chip_info *)(priv->info);
if (info->ltssm_mask)
regmap_update_bits(priv->iomuxc_gpr, info->ltssm_off, info->ltssm_mask,
info->ltssm_mask);
if (info->flags & IMX_PCIE_FLAG_HAS_APP_RESET)
reset_deassert(&priv->apps_reset);
}
static void imx_pcie_ltssm_disable(struct pcie_dw_imx *priv)
{
struct pcie_chip_info *info = (struct pcie_chip_info *)(priv->info);
if (info->ltssm_mask)
regmap_update_bits(priv->iomuxc_gpr, info->ltssm_off,
info->ltssm_mask, 0);
if (info->flags & IMX_PCIE_FLAG_HAS_APP_RESET)
reset_assert(&priv->apps_reset);
}
static bool is_link_up(u32 val)
{
return ((val & PCIE_PORT_DEBUG1_LINK_UP) &&
(!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
}
static int wait_link_up(struct pcie_dw_imx *priv)
{
u32 val;
return readl_poll_sleep_timeout(priv->dw.dbi_base + PCIE_PORT_DEBUG1,
val, is_link_up(val), 10000, 100000);
}
static int pcie_link_up(struct pcie_dw_imx *priv, u32 cap_speed)
{
int ret;
/* DW pre link configurations */
pcie_dw_configure(priv, cap_speed);
/* Initiate link training */
imx_pcie_ltssm_enable(priv);
/* Check that link was established */
ret = wait_link_up(priv);
if (ret)
imx_pcie_ltssm_disable(priv);
return ret;
}
static int imx_pcie_assert_core_reset(struct pcie_dw_imx *priv)
{
struct pcie_chip_info *info = (struct pcie_chip_info *)(priv->info);
if (info->core_reset)
info->core_reset(priv, true);
if (dm_gpio_is_valid(&priv->reset_gpio)) {
dm_gpio_set_value(&priv->reset_gpio, 1);
mdelay(20);
}
return reset_assert(&priv->apps_reset);
}
static int imx_pcie_clk_enable(struct pcie_dw_imx *priv)
{
int ret;
struct pcie_chip_info *info = (struct pcie_chip_info *)(priv->info);
ret = clk_enable_bulk(&priv->clks);
if (ret)
return ret;
/*
* Set the over ride low and enabled make sure that
* REF_CLK is turned on.
*/
if (info->enable_ref_clk)
info->enable_ref_clk(priv, true);
/* allow the clocks to stabilize */
udelay(500);
return 0;
}
static void imx_pcie_deassert_core_reset(struct pcie_dw_imx *priv)
{
struct pcie_chip_info *info = (struct pcie_chip_info *)(priv->info);
if (info->core_reset)
info->core_reset(priv, false);
if (!dm_gpio_is_valid(&priv->reset_gpio))
return;
mdelay(100);
dm_gpio_set_value(&priv->reset_gpio, 0);
/* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
mdelay(100);
}
static int pcie_dw_imx_probe(struct udevice *dev)
{
struct pcie_dw_imx *priv = dev_get_priv(dev);
struct udevice *ctlr = pci_get_controller(dev);
struct pci_controller *hose = dev_get_uclass_priv(ctlr);
struct pcie_chip_info *info = (void *)dev_get_driver_data(dev);
int ret;
if (priv->vpcie) {
ret = regulator_set_enable_if_allowed(priv->vpcie, true);
if (ret) {
dev_err(dev, "failed to enable vpcie regulator\n");
return ret;
}
}
ret = imx_pcie_assert_core_reset(priv);
if (ret) {
dev_err(dev, "failed to assert core reset\n");
return ret;
}
if (info->init_phy)
info->init_phy(priv);
imx_pcie_configure_type(priv);
ret = imx_pcie_clk_enable(priv);
if (ret) {
dev_err(dev, "failed to enable clocks\n");
goto err_clk;
}
if (info->flags & IMX_PCIE_FLAG_HAS_PHYDRV) {
ret = generic_phy_init(&priv->phy);
if (ret) {
dev_err(dev, "failed to initialize PHY\n");
goto err_phy_init;
}
ret = generic_phy_power_on(&priv->phy);
if (ret) {
dev_err(dev, "failed to power on PHY\n");
goto err_phy_power;
}
}
imx_pcie_deassert_core_reset(priv);
if (info->wait_pll_lock) {
ret = info->wait_pll_lock(priv);
if (ret) {
dev_err(dev, "failed to wait pll lock\n");
goto err_link;
}
}
if (info->post_config)
info->post_config(priv);
priv->dw.first_busno = dev_seq(dev);
priv->dw.dev = dev;
pcie_dw_setup_host(&priv->dw);
if (pcie_link_up(priv, priv->max_link_speed)) {
printf("PCIE-%d: Link down\n", dev_seq(dev));
ret = -ENODEV;
goto err_link;
}
printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev_seq(dev),
pcie_dw_get_link_speed(&priv->dw),
pcie_dw_get_link_width(&priv->dw),
hose->first_busno);
pcie_dw_prog_outbound_atu_unroll(&priv->dw, PCIE_ATU_REGION_INDEX0,
PCIE_ATU_TYPE_MEM,
priv->dw.mem.phys_start,
priv->dw.mem.bus_start, priv->dw.mem.size);
return 0;
err_link:
if (info->flags & IMX_PCIE_FLAG_HAS_PHYDRV)
generic_shutdown_phy(&priv->phy);
err_phy_power:
if (info->flags & IMX_PCIE_FLAG_HAS_PHYDRV)
generic_phy_exit(&priv->phy);
err_phy_init:
clk_release_bulk(&priv->clks);
err_clk:
imx_pcie_deassert_core_reset(priv);
dm_gpio_free(dev, &priv->reset_gpio);
if (priv->vpcie)
regulator_set_enable_if_allowed(priv->vpcie, false);
return ret;
}
static int pcie_dw_imx_remove(struct udevice *dev)
{
struct pcie_dw_imx *priv = dev_get_priv(dev);
struct pcie_chip_info *info = (void *)dev_get_driver_data(dev);
if (info->flags & IMX_PCIE_FLAG_HAS_PHYDRV)
generic_shutdown_phy(&priv->phy);
dm_gpio_free(dev, &priv->reset_gpio);
if (info->flags & IMX_PCIE_FLAG_HAS_APP_RESET)
reset_free(&priv->apps_reset);
clk_release_bulk(&priv->clks);
if (priv->vpcie)
regulator_set_enable_if_allowed(priv->vpcie, false);
return 0;
}
static int pcie_dw_imx_of_to_plat(struct udevice *dev)
{
struct pcie_chip_info *info = (void *)dev_get_driver_data(dev);
struct pcie_dw_imx *priv = dev_get_priv(dev);
ofnode gpr;
int ret, index;
priv->info = info;
/* Get the controller base address */
priv->dw.dbi_base = (void *)dev_read_addr_name(dev, "dbi");
if ((fdt_addr_t)priv->dw.dbi_base == FDT_ADDR_T_NONE) {
dev_err(dev, "failed to get dbi_base address\n");
return -EINVAL;
}
/* Get the config space base address and size */
priv->dw.cfg_base = (void *)dev_read_addr_size_name(dev, "config",
&priv->dw.cfg_size);
if ((fdt_addr_t)priv->dw.cfg_base == FDT_ADDR_T_NONE) {
dev_err(dev, "failed to get cfg_base address\n");
return -EINVAL;
}
priv->dw.atu_base = (void *)dev_read_addr_name_ptr(dev, "atu");
if (!priv->dw.atu_base)
dev_dbg(dev, "failed to get atu address from dtb\n");
ret = clk_get_bulk(dev, &priv->clks);
if (ret) {
dev_err(dev, "failed to get PCIe clks\n");
return ret;
}
index = ofnode_stringlist_search(dev_ofnode(dev), "clock-names", "ext-ref");
if (index < 0)
priv->enable_ext_refclk = false;
else
priv->enable_ext_refclk = true;
if (info->flags & IMX_PCIE_FLAG_HAS_APP_RESET) {
ret = reset_get_by_name(dev, "apps", &priv->apps_reset);
if (ret) {
dev_err(dev,
"Failed to get PCIe apps reset control\n");
goto err_reset;
}
}
ret = gpio_request_by_name(dev, "reset-gpio", 0, &priv->reset_gpio,
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
if (ret) {
dev_err(dev, "unable to get reset-gpio\n");
goto err_gpio;
}
if (info->flags & IMX_PCIE_FLAG_HAS_PHYDRV) {
ret = generic_phy_get_by_name(dev, "pcie-phy", &priv->phy);
if (ret) {
dev_err(dev, "failed to get pcie phy\n");
goto err_phy;
}
}
if (info->flags & IMX_PCIE_FLAG_HAS_SERDES) {
void __iomem *app_base;
fdt_size_t app_size;
struct regmap_config config;
app_base = (void *)dev_read_addr_size_name(dev, "app", &app_size);
if ((fdt_addr_t)app_base == FDT_ADDR_T_NONE) {
dev_err(dev, "failed to get app_base address\n");
return -EINVAL;
}
config.r_start = (ulong)app_base;
config.r_size = (ulong)app_size;
config.reg_offset_shift = 0;
config.width = REGMAP_SIZE_32;
priv->iomuxc_gpr = devm_regmap_init(dev, NULL, NULL, &config);
if (IS_ERR(priv->iomuxc_gpr)) {
dev_err(dev, "unable to remap gpr\n");
ret = PTR_ERR(priv->iomuxc_gpr);
goto err_phy;
}
}
if (info->gpr) {
gpr = ofnode_by_compatible(ofnode_null(), info->gpr);
if (ofnode_equal(gpr, ofnode_null())) {
dev_err(dev, "unable to find GPR node\n");
ret = -ENODEV;
goto err_phy;
}
priv->iomuxc_gpr = syscon_node_to_regmap(gpr);
if (IS_ERR(priv->iomuxc_gpr)) {
dev_err(dev, "unable to find iomuxc registers\n");
ret = PTR_ERR(priv->iomuxc_gpr);
goto err_phy;
}
}
priv->max_link_speed = dev_read_u32_default(dev, "fsl,max-link-speed", LINK_SPEED_GEN_1);
priv->supports_clkreq = dev_read_bool(dev, "supports-clkreq");
/* vpcie-supply regulator is optional */
device_get_supply_regulator(dev, "vpcie-supply", &priv->vpcie);
return 0;
err_phy:
dm_gpio_free(dev, &priv->reset_gpio);
err_gpio:
if (info->flags & IMX_PCIE_FLAG_HAS_APP_RESET)
reset_free(&priv->apps_reset);
err_reset:
clk_release_bulk(&priv->clks);
return ret;
}
static const struct dm_pci_ops pcie_dw_imx_ops = {
.read_config = pcie_dw_read_config,
.write_config = pcie_dw_write_config,
};
static const struct udevice_id pcie_dw_imx_ids[] = {
{ .compatible = "fsl,imx8mm-pcie", .data = (ulong)&imx8mm_chip_info, },
{ .compatible = "fsl,imx8mp-pcie", .data = (ulong)&imx8mp_chip_info, },
{ .compatible = "fsl,imx95-pcie", .data = (ulong)&imx95_chip_info, },
{ }
};
U_BOOT_DRIVER(pcie_dw_imx) = {
.name = "pcie_dw_imx",
.id = UCLASS_PCI,
.of_match = pcie_dw_imx_ids,
.ops = &pcie_dw_imx_ops,
.of_to_plat = pcie_dw_imx_of_to_plat,
.probe = pcie_dw_imx_probe,
.remove = pcie_dw_imx_remove,
.priv_auto = sizeof(struct pcie_dw_imx),
};