.. SPDX-License-Identifier: GPL-2.0+ Copyright 2025 NXP Written by Peng Fan remoteproc command ================== Synopsis -------- :: rproc init rproc list rproc load [addr] [size] rproc start rproc stop rproc reset rproc is_running rproc ping Description ----------- The rproc command provides a generic U-Boot mechanism to manage the Remote Processors inside a SoC . The 'rproc init' command enumerate and initialize the remote processor. id remote processor id. if id is not passed, initialize all the remote prcessors The 'rproc list' list available remote processors. The 'rproc load' load the remote processor with binary. id remote processor id. addr address that image is loaded at. size image size The 'rproc start' start the remote processor(must be loaded). id remote processor id. The 'rproc stop' stop the remote processor. id remote processor id. The 'rproc reset' reset the remote processor. id remote processor id. The 'rproc is_running' reports if the remote processor is running. id remote processor id. The 'rproc ping' ping the remote processor for communication. id remote processor id. Configuration ------------- The rproc command is only available if CONFIG_CMD_REMOTEPROC=y. .. toctree:: :maxdepth: 2 ../../board/nxp/rproc.rst