Make it possible to update E850-96 firmware binaries using EFI Capsule
Update mechanism. For example, to update the U-Boot binary, the capsule
file can be generated like this:
$ ./tools/mkeficapsule --index 4 \
--guid 629578c3-ffb3-4a89-ac0c-611840727779 \
u-boot.bin capsule4.bin
The resulting 'capsule4.bin' should be copied to ESP partition (in
/boot/efi/EFI/UpdateCapsule/ directory). Then after reboot U-Boot will
update the 'bootloader' area in eMMC Boot Partition A (boot0) and remove
the capsule file, by EFI boot manager executed as a part of Standard
Boot:
Applying capsule capsule4.bin succeeded.
Reboot after firmware update.
The kernel will also expose the ESRT table information via SysFS in
/sys/firmware/efi/esrt/entries.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
In [0], Andrew noted a code quality issue in the implementation of
blk_find_first and blk_find_next. This led to the observation that the
logic of these functions was also likely incorrect, and based on a quick
check it seemed the functions were unused outside of test code, which
did not exercise the potential failure case, so we felt they should be
removed. In [1], a test patch which illustrates the failure in sandbox
is provided for reference.
Because a more thorough check agrees that these functions are unused,
they are currently incorrect, and fixed/removable flags on block devices
prior to probe are unreliable, just remove these functions instead of
fixing them. All potential users should have used blk_first_device_err
instead anyway.
CI results at [2].
[0] https://patchwork.ozlabs.org/project/uboot/patch/20250714-blk-uclass-v1-1-d21428c5f762@linaro.org/
[1] https://gist.github.com/gmalysa/b05e73a5c14bc18c5741a0e0e06a2992
[2] https://gitlab.com/gmalysa/lnxdsp-u-boot/-/pipelines/1931210857
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Reviewed-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Upcoming boards will have different ethernet interfaces. So we move this
variable out of the common code.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Fastboot currently supports MMC and NAND flash devices. Similarly,
extend the support to SPI flash memories.
Note that in this initial implementation, partitions on the device are
not supported yet, but raw partitions can be set in U-Boot environment.
To define a raw partition descriptor, add an environment variable
similar to the MMC case:
```
fastboot_raw_partition_<raw partition name>=<offset> <size>
```
for example:
```
fastboot_raw_partition_boot=0x0 0x1000000
```
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
As the size of 64b ARM kernels, DTs, vendor firmware, and initial ram
disks continues to grow, the 256MB size limit set aside for image
processing by the bootm command has become too small for some K3
reference boards.
For ARMv7 removing this limit could introduce issues so move the
bootm_size variable to ti_armv7_keystone2.env and remove the limit for
any board using a TI K3 SoC.
Signed-off-by: Bryan Brattlof <bb@ti.com>
To support PQC container format which is used for post quantum
authentication on new i.MX parts like i.MX94
The major changes compared to legacy container format is in
signature block, new container tag and version, and new alignment
of container header.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
i.MX95 B0 uses image container format v2, and `one container header
occupies 0x4000, so that CMD_CNTR_VERSION needs to be added.
The purpose of CMD_DUMMY_DDR is to create a dummy image entry in boot
container prior the DDR OEI image entry. ROM reads the address of DUMMY
DDR image entry and passes it to DDR OEI in OEI entry function as
parameter value, in order to indicate the offset of training data with
the boot container.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Rasmus Villemoes <ravi@prevas.dk> says:
I was bitten by our limit macros not being usable in #if conditionals
when building a standalone app. It turns out that the work to fix that
had already been started by the inclusion of the mbedtls library, so
it's something that people do hit.
Let's finish the job by providing suitable limit macros for all three families:
- Standard C types, char, short, ...
- Kernel-style fixed-width types s8, u64, ...
- POSIX/C99 fixed-width types int16_t, uint32_t, ...
Please note that a naive approach like spelling out the full decimal
value for the constants doesn't really work, as there is no such thing
as a "negative integer constant". That is, doing
#define LLONG_MIN -9223372036854775808LL
would lead to the compiler complaining
warning: integer constant is so large that it is unsigned
and the type of that LLONG_MIN would actually be "unsigned long long", so e.g.
#if LLONG_MIN >= 0
#warning "LLONG_MIN is not negative?"
#endif
would fire.
Link: https://lore.kernel.org/r/20250707203655.613340-1-ravi@prevas.dk
Currently, we only have UINT32_MAX and UINT64_MAX in limits.h, and
then stdint.h and kernel.h somewhat randomly define UINT8_MAX and
INT32_MAX, respectively.
Provide a full set of definitions in terms of the min/max macros for
the types that [u]intNN_t are defined in terms of, namely the {s,u}NN
ones.
Try to avoid breaking whatever depended on getting UINT8_MAX from our
compat stdint.h by replacing it with an include of limits.h.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Since we define the {s,u}{8,16,32,64} types the same way on all
architectures, i.e. everybody uses asm-generic/int-ll64.h, we can just
define the associated limit macros in terms of those for the
corresponding types. This eliminates another set of limit macros that
are not usable in #if conditionals.
These type names and macros are not C or POSIX, so there's no language
violation, but certainly a violation of developers' reasonable
expectations.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
In a customer project that was building a stand-alone application, I
hit a problem related to the fact that our LONG_MAX and friends are
not standards-compliant, in that they are not "suitable for use in #if
preprocessing directives"
... /toolchain_none/arm-cortexa8-eabi/sys-include/machine/_default_types.h:25:31: error: missing binary operator before token "long"
25 | || ( defined(LLONG_MAX) && (LLONG_MAX > 0x7fffffff) )
| ^~~~~~~~~
So following up on commit 13de8483388 ("mbedtls: add mbedtls into the
build system"), move the rest of the macros associated to the standard
C types {signed,unsigned} {char, short, int, long, long long} (and of
course bare 'char') to limits.h.
Make use of the fact that both gcc and clang provide suitable
predefined __FOO_MAX__ macros for the signed types, and use a standard
scheme for defining the FOO_MIN and UFOO_MAX macros in terms of
FOO_MAX.
Note that suffixes like L and ULL are allowed for preprocessor
integers; it is (casts) which are not. And using appropriate suffixes,
we can arrange for the type of e.g. UINT_MAX to be "unsigned int" due
to integer promotion rules.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Create a basic framework for a group of devices that perform AES
cryptographic operations.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add r7s72100 Genmai board support. Serial console, NOR Flash and
Ethernet are known to work however on-board SDRAM is not yet enabled.
Signed-off-by: Magnus Damm <damm@opensource.se>
Drop CFG_SH_ETHER_PHY_MODE from configuration files, this value
is never used. No functional change intended.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Drop CFG_SH_ETHER_PHY_ADDR from README and configuration files, this
value is never used, PHY address is extracted from control DT instead.
No functional change intended.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Drop CFG_SH_ETHER_CACHE_WRITEBACK and CFG_SH_ETHER_CACHE_INVALIDATE,
which are now always enabled in the sh_eth driver, because those cache
operations are always available. On architectures which do not implement
cache operations yet, cache operations have to be implemented first.
CFG_SH_ETHER_ALIGNE_SIZE now set as SH_ETHER_ALIGN_SIZE in sh_eth.h
based on architecture and no longer configured on board level.
Remove CFG_SH_ETHER_CACHE_WRITEBACK configuration option from README.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The CFG_SH_ETHER_USE_PORT configuration option is a remnant from
before U-Boot DM existed and SH Ethernet made full use of it, and
is no longer used, remove it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
This driver has no users after we removed the last supported platform in
2023.
Fixes: 7a3ee61f5551 ("arm: Remove omap5_uevm board")
Signed-off-by: Tom Rini <trini@konsulko.com>
João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> says:
In some use cases, board-specific device tree changes must not be overwritten
by system fixups. Although U-Boot provides ft_board_setup_ex() for this
purpose, it is currently only used on TI Keystone. This series makes
ft_board_setup_ex() a generic option, allowing its use by other architectures
and boards.
Additionally, considering that Toradex Verdin-AM62P hardware lifetime
guarantees are based on a 105°C junction temperature (while TI AM62Px supports
up to 125°C), this series implements necessary changes within TI K3 AM62P and
Toradex board code. These changes include exporting common fixup device Tree
functions used in TI K3 for board-code access and also fixup for AM62P thermal
zones to correctly reflect the number of CPU nodes according to the SoC part
number.
Link: https://lore.kernel.org/r/20250623-am62p-fdt-fixup-trip-points-v1-0-12355eb6a72f@toradex.com
In some use cases, board-specific device tree changes must not be
overwritten by system fixups. Although U-Boot provides
ft_board_setup_ex() for this purpose, it is currently only used on TI
Keystone. Make ft_board_setup_ex() to be a generic option, allowing its
use by other architectures/boards. To maintain backward compatibility,
enable it by default on TI Keystone.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
This file does not need <asm/gpio.h> so remove it. This file does
however need <linux/types.h> so add that in. This also shows that
arch/arm/mach-rockchip/rk3399/rk3399.c and board/lg/star/star.c were
indirectly getting <asm/gpio.h> from here, so add <asm/gpio.h> to them.
Signed-off-by: Tom Rini <trini@konsulko.com>
As part of the recent cleanup of dt-bindigns header files we did not
remove our copy of dt-bindings/clock/xlnx-zynqmp-clk.h at the time. This
is because the difference between ours and current upstream is that
current upstream has a #warning to not use it and to instead use
xlnx-zynqmp-clk.h. So we change zynqmp-clk-ccf.dtsi to use the other
and upstream-only file and then delete our dt-bindings file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20250612181128.340232-1-trini@konsulko.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Extract the code that sets the RTC clock from sntp_handler() in
net/sntp.c and make it a new function net_sntp_set_rtc() in
net/net-common.c. This will allow re-use with NET_LWIP.
According to [1] it is safe to assume that all devices have been
converted to DM_RTC so drop the useless code.
[1] https://lists.denx.de/pipermail/u-boot/2025-June/591376.html
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Add a helper fonction to convert an IP address (supplied as a text
string) or a host name to an ip_addr_t.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Split net/lwip/wget.c in two: one part which implements CONFIG_WGET
stays in net/ while the part that implements CONFIG_CMD_WGET is moved
into cmd/.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
move the dns init including setting the dns servers from env vars to a
common function as other commands that support hostname lookups will
need this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[jf: add CMD_DNS conditional to support NET_LWIP && !CMD_DNS]
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
This commit adds the functionality of generate EFI_DEBUG_IMAGE_INFO
while loading the image.
This feature is described in UEFI Spec 2.10. Section 18.4.3.
The implementation ensures support for hardware-assisted debugging and
provides a standardized mechanism for debuggers to discover the load
address of an EFI application.
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add efi_realloc() for realloc memory that previously alloc by efi_alloc().
Note that if realloced memory is explicitly allocated as BootServicesData.
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
EFI_DEBUG_IMAGE_INFO_TABLE is used to store EFI_LOADED_IMAGE for
debug purpose. This commit adds the table to the EFI_CONFIGURATION_TABLE.
This feature is described in UEFI Spec version 2.10. Section 18.4.
The implementation ensures support for hardware-assisted debugging and
provides a standardized mechanism for debuggers to discover and interact
with system-level debug resources.
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add EFI_SYSTEM_TABLE_POINTER structure for remote debugger to locate
the address of EFI_SYSTEM_TABLE.
This feature is described in UEFI SPEC version 2.10. Section 18.4.2.
The implementation ensures support for hardware-assisted debugging and
provides a standardized mechanism for debuggers to discover the EFI
system table.
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> # change memset(systab_pointer, 0 ...) -> systab_pointer->crc32 = 0;
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The eficonfig command provides a menu based interface for maintenance
of the EFI boot options. Add support for adding a URI based boot
option. This boot option can then be used for HTTP boot.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The UEFI 2.10 specification mentions that this protocol shall be installed
along with EFI_BLOCK_IO_PROTOCOL. It provides cached partition information
for MBR and GPT partition types.
This patch just implements support for GPT partition types. The legacy MBR
partition types is only needed for backward compatibility and can be added
as a follow-up if needed, to make it fully compliant with the EFI spec.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This function will be used by the EFI application disk support code
to provide data required by the EFI_PARTITION_INFORMATION_PROTOCOL.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The function tpm2_name_to_algorithm is defined as returning an
enum for the algorithm specified but it also attempts to return
an error on failure, but that error is not included in the enum.
Add the error to the enum so that it can be returned.
This issue was reported by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Ilias Apalodimas <ilias.apalodimas@linaro.org> says:
Instructions that lead ito an exception in the hypervisor can't modify two
CPU registers at once for the ARM ISA.
These instructions cannot be emulated by KVM as they do not produce
syndrome information data that KVM can use to infer the destination
register, the faulting address, whether it was a load or store, or
if it's a 32 or 64 bit general-purpose register.
As a result an external abort is injected from QEMU, via ext_dabt_pending.
Link: https://lore.kernel.org/r/20250618065828.1312146-1-ilias.apalodimas@linaro.org
A following patch is replacing our IO accessors with
do { ... } while(0) ones in order to make them usable with KVM.
That leads to an error eventually looking like this:
arch/arm/include/asm/io.h:62:9: error: expected expression before 'do'
62 | do { \
| ^~
arch/arm/include/asm/io.h:211:41: note: in expansion of macro '__raw_writel'
211 | #define out_arch(type,endian,a,v) __raw_write##type(cpu_to_##endian(v),a)
| ^~~~~~~~~~~
arch/arm/include/asm/io.h:223:25: note: in expansion of macro 'out_arch'
223 | #define out_be32(a,v) out_arch(l,be32,a,v)
| ^~~~~~~~
drivers/spi/fsl_dspi.c:127:17: note: in expansion of macro 'out_be32'
127 | out_be32(addr, val) : out_le32(addr, val);
| ^~~~~~~~
So adjust the current macros and code to be compatible with the upcoming
change.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
To implement the EFI_SYSTEM_TABLE_POINTER we need 4 MiB aligned
memory.
On the sandbox LMB uses addresses relative to the start of a page aligned
RAM buffer allocated with mmap(). This leads to a mismatch of alignment
between EFI which uses pointers and LMB which uses phys_addr_t.
Ensure that the RAM buffer used for LMB is 4 MiB aligned.
Provide a unit test for efi_alloc_aligned_pages() verifying this alignment.
Do not overwrite RAM size in dram_init().
Link: https://lore.kernel.org/r/20250608075428.32631-1-heinrich.schuchardt@canonical.com
