While the dd command actually writes to the block device the truncate
command only updates the metadata (at least on ext4). This is faster and
reduces wear on the block device.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Commit 56f186a68b3 ("lmb: check if a region can be reserved by
lmb_reserve()") fixed the lmb_reserve() and lmb_alloc_addr() API's for
some corner case scenarios, and also added corresonding test cases for
these corner cases. These tests were checking, among other things, the
lmb_alloc_addr() API. The above commit was applied to the next branch.
Subsequently, there was commit 67be24906fe
("lmb: change the return code on lmb_alloc_addr()") which was first
applied on the master branch, and subsequently got merged to next as
part of the rebase. The second commit changes the return value of the
lmb_alloc_addr() API, which now results in some of the tests added as
part of the first commit to fail. Fix those test cases.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Ben reports a failure to boot the kernel on hardware that starts its
physical memory from 0x0.
The reason is that lmb_alloc_addr(), which is supposed to reserve a
specific address, takes the address as the first argument, but then also
returns the address for success or failure and treats 0 as a failure.
Since we already know the address change the prototype to return an int.
Reported-by: Ben Schneider <ben@bens.haus>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ben Schneider <ben@bens.haus>
Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
The patch series contains some fixes and improvements in the lmb
code, along with addition of corresponding test cases for the changes
made.
The lmb_reserve() function currently does not check if the requested
reservation would overlap with existing reserved regions. While some
scenarios are being handled, some corner cases still exist. These are
being handled by patch 1, along with adding test cases for these
scenarios.
Patch 2 is handling the case of reserving a new region of memory, but
that region overlaps with an existing region. The current code only
handles one particular scenario, but prints a message for the other
scenario of an encompassing overlap and returns back. The patch
handles the encompassing overlap.
Patch 3 is an improvement whereby we allow coalescing a newly reserved
region with an existing region. The current code exits this check
prematurely.
Patch 4 is removing a now superfluous check for overlapping regions
with flag other than LMB_NONE. This now gets handled at an earlier
point in lmb_reserve().
Patch 5 is clubbing the functionality to check if two regions are
adjacent, or overlap, allowing some code re-use.
Patch 6 is optimising the lmb_alloc() function by having it call
_lmb_alloc_base() directly.
Link: https://lore.kernel.org/r/20250303133231.405279-1-sughosh.ganu@linaro.org
The logic used in lmb_alloc() takes into consideration the existing
reserved regions, and ensures that the allocated region does not
overlap with any existing allocated regions. The lmb_reserve()
function is not doing any such checks -- the requested region might
overlap with an existing region. This also shows up with
lmb_alloc_addr() as this function ends up calling lmb_reserve().
Add a function which checks if the region requested is overlapping
with an existing reserved region, and allow for the reservation to
happen only if both the regions have LMB_NONE flag, which allows
re-requesting of the region. In any other scenario of an overlap, have
lmb_reserve() return -EEXIST, implying that the requested region is
already reserved.
Add corresponding test cases which check for overlapping reservation
requests made through lmb_reserve() and lmb_alloc_addr(). And while
here, fix some of the comments in the test function being touched.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This fails on samus_tpl as there is no 'net' command.
=> net list
Unknown command 'net' - try 'help' !
Fix it by adding a condition for the test.
Add a blank line to keep pylint happy.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is sometimes tricky to figure out what modules test.py is loading
when it starts up. The result can be a silent failure with no clue as to
what when wrong.
Add a section which lists the modules loaded as well as those not
found.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that we have a shorter name, we don't need this sort of thing.
Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # test_android
We know this is U-Boot so the prefix serves no purpose other than to
make things longer and harder to read. Drop it and rename the files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # test_android / test_dfu
This fixture name is quite long and results in lots of verbose code.
We know this is U-Boot so the 'u_boot_' part is not necessary.
But it is also a bit of a misnomer, since it provides access to all the
information available to tests. It is not just the console.
It would be too confusing to use con as it would be confused with
config and it is probably too short.
So shorten it to 'ubman'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/u-boot/CAFLszTgPa4aT_J9h9pqeTtLCVn4x2JvLWRcWRD8NaN3uoSAtyA@mail.gmail.com/
This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <trini@konsulko.com>
Separate setjmp.h into an architecture independent part and an architecture
specific part. This simplifies moving from using struct jmp_buf_data
directly to using type jmp_buf in our code which is the C compliant way.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The existing memory layout places the bloblist at 0xb000 and the fdt at
0x100, resulting in a 0xaf00 size constraint for the fdt. This constraint
has been reached. Lets modify the layout by moving the bloblist to 0x100,
device tree to 0x1000 and placing early memory allocation after pre-console
buffer at 0xf4000. This should guarantee sufficient memory allocation for
future expansion.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
With a newer pylint we get a warning about how offset could be used
before assigned. This is because when the underlying filesystem wasn't
one that is supported we would have runtime test failures. Address this
by raise'ing an Exception if fs is not supported.
Signed-off-by: Tom Rini <trini@konsulko.com>
With a newer pylint version we get a warning about how mounted_test_fn
could be used before assignment. Evaluating the code, this can't happen
because we check for "not have_writable_fs_partition" and return before
moving to the part of the tests which use mounted_test_fn. However, we
should instead have this written so that we only try this part of the
test if have_writable_fs_partition is set, and this also fixes the
warning. As part of this we also move test_f and mounted_test_fn to the
section of code that already only does this if
have_writable_fs_partition is set.
Signed-off-by: Tom Rini <trini@konsulko.com>
When running a newer version of pylint it will complain that page_size
may be used before being assignment. Looking deeper what is going on is
that we could run in to the case where the regex we run for any of the
flash information fails but since we don't have a result, we don't check
it either. In the case of the rest of the numerical values we then have
some assignment (multiplying by some value) and so pylint doesn't
complain. Rework things to assert that each regex has a result and so
failure will stop the test and we won't have any use before assignment.
Signed-off-by: Tom Rini <trini@konsulko.com>
Up to now root has been the parent device for all block devices created via
calling ConnectController(). This does not work well together with the
implementation of bootstd.
Add a dummy parent device for all EFI block devices.
With this change EFI block devices are also accessible via commands like
'cat', 'load', and 'ls'.
=> dm tree
Class Seq Probed Driver Name
-----------------------------------------------------------
efi 0 [ + ] EFI block driver `-- efi
blk 3 [ + ] efi_blk `-- efi.efiblk#0
partition 0 [ + ] blk_partition `-- efi.efiblk#0:1
=> ls efiloader 0:1
13 hello.txt
7 u-boot.txt
2 file(s), 0 dir(s)
=> cat efiloader 0:1 hello.txt
Hello world!
=> efidebug dh
0000000018df1700 (efi.efiblk#0:1)
/VenHw(dbca4c98-6cb0-694d-0872-819c650cb7b8)/HD(1,MBR,0xd1535d21,0x1,0x7f)
Block IO
Simple File System
Adjust the event dump unit test to consider the new event spy.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini <trini@konsulko.com> says:
A challenge we've run in to is making it easier for more people to use
various python tools that we include in the tree. Part of the problem is
that when we have a requirements.txt file, aside from the doc one we
share with the kernel, I created it using "pip freeze". And while this
might have been a best (or at least OK) practice at the time, that's no
longer the case and is why our files have so many things in them. What
this series does is create multiple files, one per project/tool and then
has CI install them as needed. There's a few places here where this
means that we update the requirements as well, but we keep a few big
things where they are currently. This is because updating them
introduces problems of their own and delaing with that would best be a
follow up series. I've put this through GitLab and Azure to make sure
everything is still going fine on both platforms.
Link: https://lore.kernel.org/r/20250205000743.949790-1-trini@konsulko.com
Use the "pipreqs" tool to re-create these files, with a few manual
corrections. We still need to include pytest-xdist which the tool does
not detect. We also for now don't upgrade most of the required tools as
that creates problems with various tests, which should be resolved
independently.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add unit tests for the library functions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
[jf: drop unwanted change to lib/string.c]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
At present the 'ut' command handles its flags in a strange way, in that
they must come after the subcommand.
So, we must use 'ut bloblist -r2' to run the bloblist tests twice. This
is an artefact of the way tests were run, through subcommands.
It is now possible to correct this, by doing flag-processing before
running the suite.
Update the code to handle this, so that 'ut -r2 bloblist' works. Update
the 'test_suite' test to check the new arguments.
Add a sanity-check for -I while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the logic from this function into run_suite(), on the way to having
flag parsing in the top-level 'ut' command instead of its children.
Signed-off-by: Simon Glass <sjg@chromium.org>
Enhance the ut command to accept a comma-separated list of test suites
to run. Report the summary information for these at the end.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that everything is using the new test-suite features, drop support
for running commands.
Fix a missing closing-bracket while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
These tests run three different checks on the nodes, but the logic is
currently all in one tests.
Split the code out into three different tests, which do different setup
and then run the same checks.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Fix the comment abotu 'environment' while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the helpers provided for this purpose, rather than different ones in
this particular test.
Leave fdt_getprop_str() alone as it seems to have more value.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the init code into a separate function since it is quite large.
Adjust it to use unit-test functions which have become available since
the test was written.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having this condition defined separately for each suite,
bracket all options with 'if UNIT_TEST'.
Signed-off-by: Simon Glass <sjg@chromium.org>
