CFG_SYS_SPI_* are used in falcon boot to specify the offsets and size of
the respective payloads. This patch moves them to Kconfig keeping the
values consistent for each of the affected boards.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Enable support for USB mass storage class (UMS) via USB0 instance of
USB on AM64x SoC. UMS allows USB host to access U-Boot block device
and enable file transfer.
Example usage of UMS command :
=> mmc list
mmc@fa10000: 0 (eMMC)
mmc@fa00000: 1
=> ums 0 mmc 1
UMS: LUN 0, dev mmc 1, hwpart 0, sector 0x0, count 0x3b72400
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Mocha was added and tested right before this config option was added. Add
it to restore proper booting.
Fixes: d6a53f52 ("spl: Add an SPL_HAVE_INIT_STACK option")
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Ouya was added and tested right before this config option was added. Add it
to restore proper booting.
Fixes: d6a53f52 ("spl: Add an SPL_HAVE_INIT_STACK option")
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Without 'nvme scan' the ESP on the NVMe drive is not found early.
EFI variables cannot be persisted.
Hit any key to stop autoboot: 0
Cannot persist EFI variables without system partition
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 0' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
scanning bus for devices...
** Booting bootflow 'nvme#1.blk#1.bootdev.part_1' with efi
Booting /\EFI\BOOT\BOOTRISCV64.EFI
error: no suitable video mode found.
GNU GRUB version 2.12
With 'nmve scan' booting works as expected.
Hit any key to stop autoboot: 0
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 0' failed
Loading Boot0001 'nvme 0' failed
Booting: nvme 1
error: no suitable video mode found.
GNU GRUB version 2.12
Reported by Yuri Zaporozhets <yuriz@vodafonemail.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
take 2
-----BEGIN PGP SIGNATURE-----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=2n9a
-----END PGP SIGNATURE-----
Merge tag 'qcom-next-20250324' of https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon into next
qcom-next-20230324:
* msm8916 gets proper sysreset and spin-table support
* The first new IPQ platform is added - the IPQ9574. The IPQ series are
used in routers. The flashing process is also documented
* mach-snapdragon gains the ability to boot with an internal FDT and
still parse memory from an externally provided one
* SC7280 gets a pinctrl driver and various clock driver improvements.
* Qualcom clock drivers will now actually return an error when
attempting
to enable a clock which isn't described.
* Qualcomm pinctrl drivers will now return an error when attempting to
configure an invalid function mux
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/25267
- Allow the registration and enablement of the i.MX UART clocks via DM,
without the need of manually calling init_uart_clk().
- Remove duplicated 'mmc dev ${mmcdev}' commands.
- Rework some of the RAM related Kconfig symbols for phycore_imx8mp.
In preparation to remove manual references for enabling some clocks,
enable SPL_CLK_IMX8MP which automatically enables SPL_CCF and
SPL_CLK_COMPOSITE_CCF which permit various drivers to activate
their respective clocks automatically.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The Ouya microconsole is build on Nvidia Tegra 3 (T33) SoC, featuring a
quad-core 1.7 GHz ARM Cortex-A9 CPU and a ULP GeForce GPU, paired with 1GB
of DDR3 RAM and 8GB of internal flash storage. Running a modified Android
4.1 (Jelly Bean) OS with a custom launcher, it aimed for open-source gaming
via a digital storefront.
This implementation is mostly based on upstream Linux device tree and
fragments of work done by previous developers.
Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Upgrade HTC One X device tree to comply possible upstream Linux device
tree. Once Linux catches up, HTC One X can be switched to OF_UPSTREAM.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Upgrade LG P895 and P880 device tree bindings according to preliminary
upstream Linux tree. Once Linux catches up, LG X3 can be switched to
OF_UPSTREAM without regressions.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Enable support for USB 2.0, USB 1.1 and USB storage devices on the
Renesas RZ/G2L EVK.
Also enable the 'usb' command to support USB scanning and debugging.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Harrison Mutai <harrison.mutai@arm.com> says:
This patch introduces two updates to the vexpress64 project:
- Disable CRC32 by default to prevent aborts in a standard FVP setup.
- Add a guide for running FVP with TF-A, providing a clear starting point for
users.
Link: https://lore.kernel.org/r/20250304165204.53097-1-harrison.mutai@arm.com
Wadim Egorov <w.egorov@phytec.de> says:
This patch series syncs the phyCORE-AM62Ax feature-wise with our other
K3-based SoMs by adding SoM overlay handling and capsule updates. It
also introduces support for USBDFU boot and includes various minor fixes.
Link: https://lore.kernel.org/r/20250305045838.3614661-1-w.egorov@phytec.de
This config includes the phycore_am62ax_r5_defconfig file as well as
the am62x_r5_usbdfu.config fragment. We need another defconfig
because the AM62Ax has not enough internal SRAM to support all boot
sources. The normal phycore_am62ax_r5_defconfig should allow to boot
from MMC and OSPI while this new defconfig allows to boot from USB.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Enable raw & on disk capsule updates and provide configs required
for updating MTD devices. Also resync after savedefconfig.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
On fast models, the CRC32 feature is disabled by default. When enabled
in U-Boot, it leads to synchronous aborts due to unrecognized
instructions. This change ensures CRC32 is disabled by default to
maintain compatibility.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Currently this platform implicity builds CONFIG_TPL_DM_I2C support
without setting the symbol. Add it for clarity.
Signed-off-by: Tom Rini <trini@konsulko.com>
Basic board support for BeagleY-AI. Information on this
board can be found at https://beagleboard.org/beagley-ai
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Since removing reset_cpu() in mach-snapdragon, all Qualcomm platforms
now depend on CONFIG_SYSRESET and will fail to build without it.
Move the dependency from qcom_defconfig to kconfig so that we use
SYSRESET for all platforms.
Fixes: 61a1a1b8ca73 ("mach-snapdragon: use PSCI sysreset driver")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Enable fallback PSCI provider on Renesas R-Car R8A779G0 V4H White Hawk board.
This fallback PSCI provider provides basic PSCI interface which can be used
by the Linux kernel, but does not provide support for bringing up additional
CPU cores or any other functionality, except for SoC level reset.
This fallback PSCI provider is intended as a fallback in case a proper PSCI
provider is not started before the Linux kernel is started. Linux kernel on
ARMv8a will fail to boot in case a PSCI provider is not available, and this
basic fallback PSCI provider assures such a boot failure cannot occur, even
if that means the system will boot in degraded mode with only one CPU core
available, that is still sufficient to perform recovery.
In the common case, a proper PSCI provider should be started as part of
the Linux kernel fitImage, as the BL31 loadable, and replace this basic
fallback PSCI provider before the Linux kernel is started.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Introduce the config fragment for enabling USB MSC boot. USB MSC boot
involves fetching the next stage of the bootloader from a USB Mass Storage
device such as a USB Flash Drive with the USB controller on the SoC acting
as the USB Host.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Introduce the config fragment for enabling USB MSC boot. USB MSC boot
involves fetching the next stage of the bootloader from a USB Mass Storage
device such as a USB Flash Drive with the USB controller on the SoC acting
as the USB Host.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The configuration options CONFIG_VIDCONSOLE_AS_LCD and CONFIG_VIDCONSOLE_AS_
NAME have been marked as obsolete and scheduled for deletion in late 2020.
That's already long overdue and the last remaining consumers of these options
have already migrated to using "vidconsole" in their "stdout" and "stderr"
environment variables, so let's delete these two configuration options.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Soeren Moch <smoch@web.de> # tbs2910
When "fdtfile" is not set, use the "variant" environment variable to
select the correct DTB.
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/Touch controller
which is EOL with the TLA2024 ADC and AD7879 touch controller. They thus
require a different DTB, which we can easily select with the variant env
variable.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.
Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Resync defconfig files]
The most common word for features that make a platform work is to use
'HAVE_xxx'. Rename this option to match.
Update the help to use the word 'phase' rather than 'stage', since
that is the current terminology. Also clarify that, absent this setting,
the stack pointer generally comes from the value used by U-Boot proper,
rather than SPL.
Move the option just above TPL_STACK which depends on it.
Signed-off-by: Simon Glass <sjg@chromium.org>
- Restrict _debug_uart_init() usage in STM32 serial driver
- Add support for environment in eMMC on STM32MP13xx DHCOR SoM
- Introduce DH STM32MP15xx DHSOM board specific defconfigs
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM
- Update maintainer for board stm32f746-disco
- Fix Linux cmdline for stm32f769-disco
- Cleanup in stm32f***-u-boot.dtsi and in board_late_init() by removing
legacy led and button management.
-----BEGIN PGP SIGNATURE-----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=xL/c
-----END PGP SIGNATURE-----
Merge tag 'u-boot-stm32-20250312' of https://source.denx.de/u-boot/custodians/u-boot-stm into next
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/25112
- Add drivers for MFD STM32 TIMERS and STM32 PWM and enable them on stm32mp135f-dk
- Restrict _debug_uart_init() usage in STM32 serial driver
- Add support for environment in eMMC on STM32MP13xx DHCOR SoM
- Introduce DH STM32MP15xx DHSOM board specific defconfigs
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM
- Update maintainer for board stm32f746-disco
- Fix Linux cmdline for stm32f769-disco
- Cleanup in stm32f***-u-boot.dtsi and in board_late_init() by removing
legacy led and button management.
Enable the following configs:
* CONFIG_MFD_STM32_TIMERS: enables support for the STM32 multifunction
timer
* CONFIG_DM_PWM: enables support for pulse-width modulation devices
* CONFIG_CMD_PWM: enables 'pwm' command to control PWM channels
* CONFIG_PWM_STM32: enables support for the STM32 PWM devices
Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
