Today, only a few platforms enable SPL_LOAD_FIT_FULL, and all enable
SPL_LOAD_FIT. As can be seen in usage, the FULL symbol is a superset of
the first symbol, not an alternative. Update Kconfig entries based on
this and simplify the only code which checks for either being set.
Signed-off-by: Tom Rini <trini@konsulko.com>
dm_eth_phy_connect_interface() is a variant of dm_eth_phy_connect() that
allows to set the used PHY mode, in case the MAC driver needs to fix it
up. The previously static dm_eth_connect_phy_handle() is renamed and
extended for this purpose.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
While we declare some of our dummy functions as "inline" we do not also
declare them as "static" and so it is possible for the compiler to
decide to make these as global functions instead. This can lead to link
time failures in some cases, such as "allyesconfig". As these are just
dummy functions, convert them to a macro instead.
Signed-off-by: Tom Rini <trini@konsulko.com>
This series adds significant and valuable work by Mikhail Kshevetskiy to
align spi-mem with Linux 6.16. It also includes contributions to the mtd
performance patches, a work started by Miquel Raynal and improved by
Mikhail Kshevetskiy. Additionally, two patches tighten dependencies on
the Atmel driver.
The patches pass the pipeline CI:
https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/27873
Peng Fan (OSS) <peng.fan@oss.nxp.com> says:
Misc update on firmware scmi:
- Typo fix
- Use io helpers
- Use PAGE_SIZE for arm64
- Add IN_USE error code
- Add more error info
- Support scmi max rx timeout in mailbox
- Add myself as scmi maintainer, AKASHI contributed most code, but
seems he is not invovled in the developement anymore, I volunteer to
help here.
Some items on list that I am thinking to add:
- align with linux kernel to use cpu_to_le32 and le32_to_cpu, but have not find
a good way to use the helpers.
- Add SCMI version negotiation as Linux Kernel
Link: https://lore.kernel.org/r/20250927-scmi-v1-0-5e9354fb3bff@nxp.com
In SCMI spec 3.2, there is an update:
Add IN_USE error code for usage with Pin control protocol
So add the error decoding for IN_USE.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The script based firmware loader does not use anything from the
fs_loader implementation. Separate it into its own library source
file and convert the mediatek PHY to use this separate code. This
should reduce the amount of code that is pulled in alongside the
firmware loader, as the FS loader is no longer included.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
This define is obsolete, and bus width is now handled via
CONFIG_SYS_NAND_BUSWIDTH_16BIT option.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Linux kernel .get_temp() callback reports values in millicelsius,
U-Boot currently reports them in celsius. Align the two and report
in millicelsius. Update drivers accordingly. Update callsites that
use thermal_get_temp() as well.
The 'temperature' command now reports temperature in millicelsius
as well, with additional accuracy. This changes command line ABI
slightly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: David Zang <davidzangcs@gmail.com>
[trini: Update test/cmd/temperature.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
Use plain buffer pointer in request_firmware_into_buf_via_script()
instead of a pointer to pointer. The later is not necessary as the
request_firmware_into_buf_via_script() does not modify the buffer
pointer. Update the mediatek driver to match.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
The bootstd framework is the new way to support various bootflows
and media. Use it instead of legacy distro boot.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
This makes the U-Boot SPI NAND driver almost the same as in Linux
6.17-rc1. The only major differences are:
* support of ECC engines. The Linux driver supports different ECC
engines while U-Boot uses on-die ECC only.
* per operation maximum SPI bus frequency
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
There is already a manufacturer hook, which is manufacturer specific but
not chip specific. We no longer have access to the actual NAND identity
at this stage so let's add a per-chip configuration hook to align the
chip configuration (if any) with the core's setting.
This is a port of linux commit
da55809ebb45 ("mtd: spinand: Add a ->configure_chip() hook")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Currently the best variant picked in the first one in the list provided
in the manufacturer driver. This worked well while all operations where
performed at the same speed, but with the introduction of DTR transfers
this no longer works correctly.
Let's continue iterating over all the alternatives, even if we find a
match, keeping a reference over the theoretically fastest
operation. Only at the end we can tell which variant is the best.
This logic happening only once at boot.
The patch is based on linux commit
666c299be696 (mtd: spinand: Enhance the logic when picking a variant)
created by Miquel Raynal <miquel.raynal@bootlin.com>
The code was a bit restricted in the functionality since not all
required functionality is supported in the u-boot.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The code was ported from linux-6.15
based on a linux commit c06b1f753bea (mtd: spinand: add OTP support)
created by Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
When the host ECC fails to correct the data error of NAND device,
there's a special read for data recovery method which can be setup
by the host for the next read. There are several retry levels that
can be attempted until the lost data is recovered or definitely
assumed lost.
This is the port of linux commit
f2cb43c98010 (mtd: spinand: Add read retry support)
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The code was ported from linux-6.12. The original continuous reading
support was implemented by Miquel Raynal <miquel.raynal@bootlin.com>
in linux commit 631cfdd0520d (mtd: spi-nand: Add continuous read support).
Here is an original patch description:
--------------------------------------
A regular page read consist in:
- Asking one page of content from the NAND array to be loaded in the
chip's SRAM,
- Waiting for the operation to be done,
- Retrieving the data (I/O phase) from the chip's SRAM.
When reading several sequential pages, the above operation is repeated
over and over. There is however a way to optimize these accesses, by
enabling continuous reads. The feature requires the NAND chip to have a
second internal SRAM area plus a bit of additional internal logic to
trigger another internal transfer between the NAND array and the second
SRAM area while the I/O phase is ongoing. Once the first I/O phase is
done, the host can continue reading more data, continuously, as the chip
will automatically switch to the second SRAM content (which has already
been loaded) and in turns trigger the next load into the first SRAM area
again.
From an instruction perspective, the command op-codes are different, but
the same cycles are required. The only difference is that after a
continuous read (which is stopped by a CS deassert), the host must
observe a delay of tRST. However, because there is no guarantee in Linux
regarding the actual state of the CS pin after a transfer (in order to
speed-up the next transfer if targeting the same device), it was
necessary to manually end the continuous read with a configuration
register write operation.
Continuous reads have two main drawbacks:
* They only work on full pages (column address ignored)
* Only the main data area is pulled, out-of-band bytes are not
accessible. Said otherwise, the feature can only be useful with on-die
ECC engines.
Performance wise, measures have been performed on a Zynq platform using
Macronix SPI-NAND controller with a Macronix chip (based on the
flash_speed tool modified for testing sequential reads):
- 1-1-1 mode: performances improved from +3% (2-pages) up to +10% after
a dozen pages.
- 1-1-4 mode: performances improved from +15% (2-pages) up to +40% after
a dozen pages.
This series is based on a previous work from Macronix engineer Jaime
Liao.
--------------------------------------
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
SkyHigh spinand device has ECC enable bit in configuration register but
it must be always enabled. If ECC is disabled, read and write ops
results in undetermined state. For such devices, a way to avoid raw
access is needed.
Introduce SPINAND_NO_RAW_ACCESS flag to advertise the device does not
support raw access. In such devices, the on-die ECC engine ops returns
error to I/O request in raw mode.
Checking and marking BBM need to be cared as special case, by adding
fallback mechanism that tries read/write OOB with ECC enabled.
This is a port of linux commit
6d9d6ab3a82a (mtd: spinand: Introduce a way to avoid raw access)
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Add two flags for inserting the Plane Select bit into the column
address during the write_to_cache and the read_from_cache operation.
Add the SPINAND_HAS_PROG_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the write_to_cache operation.
Add the SPINAND_HAS_READ_PLANE_SELECT_BIT flag for serial NAND flash
that require inserting the Plane Select bit into the column address
during the read_from_cache operation.
This is a port of linux commit
ca229bdbef29 (mtd: spinand: Add support for setting plane select bits)
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240909092643.2434479-2-linchengming884@gmail.com
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This makes the U-Boot SPI NAND driver almost the same as in Linux 6.10.
The only major difference is support of ECC engines. The Linux driver
supports different ECC engines while U-Boot uses on-die ECC only.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This aligns spinand_wait() with the linux kernel. Instead of calling into
spi_mem_poll_status() which is not implemented in U-Boot, we code the
polling logic and make sure that schedule() is called periodically.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Use an enum to differentiate the type of I/O (reading or writing a
page). Also update the request iterator.
This is a port of linux commit
701981cab016 ("mtd: nand: Add a NAND page I/O request type")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-5-miquel.raynal@bootlin.com
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Make use of the spi-mem direct mapping API to let advanced controllers
optimize read/write operations when they support direct mapping.
Based on a linux commit 981d1aa0697c ("mtd: spinand: Use the spi-mem dirmap API")
created by Boris Brezillon <bbrezillon@kernel.org> with additional
fixes taken from Linux 6.10.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This pulls in multiple changes from the Linux kernel in order to keep
the code in sync. This also fixes octal mode support.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
While we continue to have some systems which support extremely legacy
OS booting methods, we do not have use cases for supporting this in
Falcon mode anymore. Remove this support and references from the
documentation.
Co-developed-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Synchronize upper_NN_bits() and lower_NN_bits() macros with Linux 6.16
commit 118d777c4cb4 ("wordpart.h: Add REPEAT_BYTE_U32()"). This fixes the
lower_32_bits() macros and assures it works with 64bit systems correctly.
This also adds 16bit variants of these macros, which will be used by the
Airoha PHY driver.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
SoCFPGA updates for v2025.10:
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27762
This pull request brings a set of updates across SoCFPGA platforms
covering Agilex5, Agilex7, N5X, and Stratix10. The changes include:
* Agilex5 enhancements:
- USB3.1 enablement and DWC3 host driver support
- System Manager register configuration for USB3
- Watchdog timeout increase and SDMMC clock API integration
- dcache handling improvements in SMC mailbox path
- Enable SPL_SYS_DCACHE_OFF in defconfig
* Clock driver improvements:
- Introduce dt-bindings header for Agilex clocks
- Add enable/disable API and EMAC clock selection fixes
- Replace manual shifts with FIELD_GET usage
* DDR updates:
- IOSSM mailbox compatibility check
- Correct DDR calibration status handling
* Device tree changes:
- Agilex5: disable cache allocation for reads
- Stratix10: add NAND IP node
- Enable driver model watchdog
- Enable USB3.1 node for Agilex5
* Config cleanups:
- Simplify Agilex7 VAB defconfig
- Remove obsolete SYS_BOOTM_LEN from N5X VAB config
- Enable CRC32 support for SoCFPGA
- Increase USB hub debounce timeout
Overall this set improves reliability of DDR and cache flows,
adds missing USB and MMC features for Agilex5, and refines clock
and configuration handling across platforms.
This patch set has been tested on Agilex 5 devkit, and Agilex devkit.
Introduce header file to define the clock indexes for the Agilex
platform.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Rasmus Villemoes <ravi@prevas.dk> says:
This all started from me wondering "why does this standalone app end
up being so huge"? Oh, it essentially links in its own standard C
library to get strlen() and snprintf(). Which then led to asking "why
don't we export all those standard C functions when we have them
anyway?".
CI has chewed on these and seem happy - it was CI which told me about
the necessity of [1/9]: https://github.com/u-boot/u-boot/pull/813
Link: https://lore.kernel.org/r/20250919101002.568488-1-ravi@prevas.dk
There have been quite a few changes to _exports.h since the last
update of XF_VERSION, also before the previous patches in this series.
I doubt the mechanism is actually being used in practice, it is simply
too fragile: Not only does the list of exported functions depend on
.config, so with the same XF_VERSION the jump table entries could have
different offsets. But getting to the jump table itself from gd to
even call the ->get_version() is fragile, since offsetof(gd_t, jt)
can, and does, change. For example, as recently as commit
d9902107027 ("global_data: Remove jump table in SPL").
One really must build one's standalone app against the proper U-Boot
version and config.h. But for good measure, do bump it now.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
The current list of exported functions lacks quite a few bog-standard C
library functions that we might as well expose, since U-Boot certainly
has them implemented anyway. There's no reason a standalone
application should have its own strlen() implementation or link in a
copy from some tiny libc.
For a customer's standalone app, this means it goes from 95K to 10K.
More importantly, we can ditch the custom toolchain including a
newlibc used to build the standalone app and just use the same
toolchain as used to build u-boot itself.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
The current list of exported functions is somewhat of a
mess. Reorganize them so that related functionality is kept together:
- console I/O: move vprintf next to printf and the getc/putc functions
- integer parsing: move the *strto* functions together
- standard string.h stuff: move memset() and strcpy() next to strcmp()
- time: move mdelay() next to udelay() and get_timer()
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
After finishing a later patch in this series, I discovered I had
neglected to update the list of declarations in exports.h to
match. But then I realized I wasn't the first to do that.
Use the existing mechanism and DRY it out.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
As for the i2c functions, drop the dummy entries that, if ever used,
would just have the standalone app get some random content in the
return register.
While deprecated, the spi_{setup,free}_slave functions do exist even
with CONFIG_DM_SPI - and a standalone app can't really do anything but
refer to a spi device via a (bus, cs) pair.
Eventually, one should probably export some function that could allow
a standalone app to get a struct udevice* corresponding to either a
full DT path, an alias, or perhaps a label (provided one builds with
-@), and then export functions that can operate on that.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
There's really no good reason to create stub entries that would call a
function that doesn't even return anything sensible.
The existence of these two i2c_* functions depends on
CONFIG_IS_ENABLED(SYS_I2C_LEGACY), which does depend on !DM_I2C, but
is not equivalent to it. They are probably rather hard to use unless
CMD_I2C and something in U-Boot has called "i2c dev foo" to set the
current i2c bus before calling the standalone app, so keep that
dependency.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Currrently, malloc and free are function-like macros, while calloc,
realloc and memalign are object-like macros.
Usually, this doesn't matter, but it does when the identifiers appear
without a following open parenthesis, such as when their address is
taken for building the export table. Adding calloc or realloc to that
table breaks the build on sandbox due to this inconsistency.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add board-level code and defconfig for the i.MX943 EVK board, supporting
multiple SOM variants: 19x19 LPDDR5, 19x19 LPDDR4 and 15x15 LPDDR4.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
System Manager provides the last booted and shutdown reasons of the
logical machines (LM) and system using the SCMI misc protocol (Protocol
ID: 0x84, Message ID: 0xA). This path adds get_reset_reason() to query
and print these reasons in SPL and U-Boot.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
The android boot header is page aligned but the current code made the
assumption that the header was always smaller than the current header
format.
When the page_size is defined as 2048, as this is the case with the
cuttlefish target, the current code sets the end of the header in the
middle of it as the v3 and v4 headers are respectively 2112 and 2128
bytes long.
Fix that by aligning to page_size
Fixes: 1115027d2f75 ("android: boot: update android_image_get_data to support v3, v4")
Signed-off-by: Guillaume Ranquet <ranquet.guillaume@gmail.com>
The ahab_commit command allows the user to commit into the SECO fuses
that control the SRK key revocation information. This is used to Revoke
compromised SRK keys.
To use ahab_commit, the boot container must be built with an SRK
revocation bit mask that is not 0x0. For the SPSDK provided by NXP, this
means setting the 'srk_revoke_mask' option in the config file used to
sign the boot container. The 'ahab_commit 0x10' can then be used to commit
the SRK revocation information into the SECO fuses.
Signed-off-by: John Ripple <john.ripple@keysight.com>
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> says:
In the qemu-sbsa configuration, the GICv3 definition is disabled due to
a typo. After fixing the typo, GICv3 is enabled, however, the GIC register
base address definitions are missing, resulting in a build failure.
This series enables GICv3 and resolves this build error.
Confirming that U-Boot successfully starts up in QEMU SBSA environment
after the fix.
Link: https://lore.kernel.org/r/20250910092327.279749-1-hayashi.kunihiko@socionext.com
If GICV3 is enabled, GICD_BASE and GICR_BASE are needed at
arch/arm/cpu/armv8/start.S.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Some of the functions in this file do not follow the normal style. Fix
this so that things are more consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Setting fdt_high to all ones is discouraged and does not appear to be
useful for RISC-V QEMU. Moreover, it causes a boot failure when the FDT
generated internally by QEMU is used while booting. Remove it to allow
U-Boot to pick a suitable address and relocate the FDT.
Closes: https://lore.kernel.org/u-boot/8397369a-9b0b-4798-9c30-3a81165657d6@iscas.ac.cn
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Make all Icicle Kit files generic. This supports the addition of
upcoming support for other MPFS boards.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
