Sughosh Ganu <sughosh.ganu@linaro.org> says:
The patch series contains some fixes and improvements in the lmb
code, along with addition of corresponding test cases for the changes
made.
The lmb_reserve() function currently does not check if the requested
reservation would overlap with existing reserved regions. While some
scenarios are being handled, some corner cases still exist. These are
being handled by patch 1, along with adding test cases for these
scenarios.
Patch 2 is handling the case of reserving a new region of memory, but
that region overlaps with an existing region. The current code only
handles one particular scenario, but prints a message for the other
scenario of an encompassing overlap and returns back. The patch
handles the encompassing overlap.
Patch 3 is an improvement whereby we allow coalescing a newly reserved
region with an existing region. The current code exits this check
prematurely.
Patch 4 is removing a now superfluous check for overlapping regions
with flag other than LMB_NONE. This now gets handled at an earlier
point in lmb_reserve().
Patch 5 is clubbing the functionality to check if two regions are
adjacent, or overlap, allowing some code re-use.
Patch 6 is optimising the lmb_alloc() function by having it call
_lmb_alloc_base() directly.
Link: https://lore.kernel.org/r/20250303133231.405279-1-sughosh.ganu@linaro.org
The actual logic to allocate a region of memory is in the
_lmb_alloc_base() function. The lmb_alloc() API function calls
lmb_alloc_base(), which then calls _lmb_alloc_base() to do the
allocation. Instead, call the _lmb_alloc_base() directly from both the
allocation API's, and move the error message to the _lmb_alloc_base().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The functions to check if the two said regions are adjacent or overlap
are pretty similar in nature. Club the functionality into a single
function lmb_regions_check() and return the appropriate return value
to signify this aspect.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
U-Boot allows re-use of already reserved memory through the
lmb_reserve() and lmb_alloc_addr() API's. This memory re-use is
allowed only when the flag of the existing reserved region and that of
the requested region is LMB_NONE. A check was put in the
lmb_add_region_flags() in commit 8b8b35a4f5e to handle the scenario
where an already reserved region was re-requested with region flag
other than LMB_NONE -- the function then returns -EEXIST in such a
scenario.
The lmb_reserve() function now does a check for a reservation request
with existing reserved regions, and returns -EEXIST in case of an
overlap but when the flag check fails. Remove this now redundant check
from lmb_add_region_flags().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The lmb_add_region_flags() first checks if the new region to be added
can be coalesced with existing regions. The check stops if the two
regions are adjecent but their flags do not match. However, it is
possible that the newly added region might be adjacent with the next
existing region and with matching flags. Check for this possibility by
not breaking out of the loop.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The lmb_fix_over_lap_regions() function is called if the added region
overlaps with an existing region. The function then fixes the overlap
and removes the redundant region. However, it makes certain
assumptions. One assumption is that the overlap would not encompass
the existing region. Another assumption is that the overlap only
occurs between two regions -- the scenario of the added region
overlapping multiple existing regions is not being handled. Handle
these cases by instead calling lmb_resize_regions(). Also remove the
now superfluous lmb_fix_over_lap_regions().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The logic used in lmb_alloc() takes into consideration the existing
reserved regions, and ensures that the allocated region does not
overlap with any existing allocated regions. The lmb_reserve()
function is not doing any such checks -- the requested region might
overlap with an existing region. This also shows up with
lmb_alloc_addr() as this function ends up calling lmb_reserve().
Add a function which checks if the region requested is overlapping
with an existing reserved region, and allow for the reservation to
happen only if both the regions have LMB_NONE flag, which allows
re-requesting of the region. In any other scenario of an overlap, have
lmb_reserve() return -EEXIST, implying that the requested region is
already reserved.
Add corresponding test cases which check for overlapping reservation
requests made through lmb_reserve() and lmb_alloc_addr(). And while
here, fix some of the comments in the test function being touched.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
- Check return value of fdt_getprop for NULL.
- Return -EFAULT if 'algo' property is missing.
- Prevent NULL pointer dereference in strcmp."
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
Using HTTPS without root (CA) certificates is a security issue. Print a
warning in this case. Also, when certificate verification fail, print
an additional message because "HTTP client error 4" is not very
informative (4 is HTTPC_RESULT_ERR_CLOSED).
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Instead of relying on some build time configuration to determine if
server certificates need to be checked against CA certificates, do it
based on the availability of such certificates. If no CA is configured
then no check can succeed; on the other hand if we have CA certs then
we should not ignore them. It is always possible to remove the CA certs
(via 'wget cacert 0 0') to force an HTTPS download that would fail
certificate validation.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
-----BEGIN PGP SIGNATURE-----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=xGcd
-----END PGP SIGNATURE-----
Merge tag 'v2025.04-rc4' into next
This uses Heinrich's merge of lib/efi_loader/efi_net.c which results in
no changes.
The lone user of this driver has been removed for some time. Remove this
driver as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20250227205101.4127604-2-trini@konsulko.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The lone user of the legacy USB device framework have been removed for
some time. Remove the final parts of the code that were missed.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20250227205101.4127604-1-trini@konsulko.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
CONFIG_SYS_FDT_PAD defines the number of unused bytes added to a
device-tree and not the total size.
Fixes: 40ed7be4af52 ("Convert CONFIG_SYS_FDT_PAD to Kconfig")
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Structure jmp_buf_data provides the underlying format of jmp_buf, which
we actually don't care about. Clean up existing code to use the standard
jmp_buf type. This introduces no functional change.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Separate setjmp.h into an architecture independent part and an architecture
specific part. This simplifies moving from using struct jmp_buf_data
directly to using type jmp_buf in our code which is the C compliant way.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add support for multiple efi_net_obj structs in efi_net.c. This comes
in preparation for an EFI network driver supporting multiple network
interfaces. For now the EFI network stack still registers a single ethernet
udevice as an EFI network device even if multiple are present, namely
the one that was the current device at the moment of EFI initialization.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
In preparation to support mutiple efi net udevices. Add a device path
cache to support device paths from multiple ethernet udevices.
The device paths can be added to the cache before EFI gets initialized and
the protocols get installed.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
In preparation to support multiple EFI net objects, support
constructing device paths using an ethernet device different
than the default. Add a udevice argument to the device path
generation, and keep the callsites with eth_get_dev() to
preserve existing functionality.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
This gets called each time a payload is to get executed by bootefi.
For now this only updates the PXE IP address.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
The coomand bootefi calls efi_init_obj_list to do the efi set up
before launching an .efi payload, but efi_init_obj_list is called
only once. There are some initializations which depend on the
environment and should be done each time a payload gets launched and
not only once. A motivation for this changes is the following order
of events:
1. Launch an EFI application (e.g. bootefi hello)
2. Change the ip address
3. Launch another application which uses the pxe protocol
As the EFI pxe protocol was initialized when the handles
for efi net were created in 1., the ip was hardcoded there.
In this example, another possibility would be to make a callback for ip
address changes to go all the way up to efi_net.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
The following symbols are exposed:
- efi_reinstall_protocol_interface
This is done so that the device path protocol interface
of the network device can be changed internally by u-boot
when a new bootfile gets downloaded.
- eth_set_dev
To support multiple network udevices
- efi_close_event
This comes in preparation to support unregistering
an EFI network device from the EFI network stack when
the underlying U-boot device gets removed
- efi_[dis]connect_controller
The EFI network driver uses ConnectController to add a
NIC to the EFI network stack.
- efi_uninstall_protocol_interface
connect_controler for the efi network driver can install
protocols, which need to be uninstalled in disconnect_controller
- EFI_SIMPLE_NETWORK_PROTOCOL_GUID
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
This commit fixes an use after free introduced in Commit e55a4acb54
(" efi_loader: net: set EFI bootdevice device path to HTTP when loaded
from wget"). The logic in efi_net_set_dp is reworked so that when the
function is invoked it not only changes the value of the static variable
net_dp (this is how the function was implemented in e55a4acb54) but also
updates the protocol interface of the device path protocol in case efi
has started.
Fixes: e55a4acb54e8 ("efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget")
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
Following the UEFI specification. The specification did not seem to
delineate if file_name was explicitly a file name only, or could
include paths to move the file to a different directory. The more
generous interpretation of supporting paths was selected.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In order to support renaming via SetInfo(), path must allow for longer
values than what was originally present when file_handle was allocated.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
- Ensure `free_ctx` is called in both error and success paths.
- Fix memory leak in `ctx.signature` when `do_add` fails."
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
The current code has a problematic corner case with formar "%c" and
0 as parameter. The proper zero byte is being emitted into digit buffer
but the final copy into outstr expects null-terminated string and doesn't
copy the required \0 byte. This has lead to malformed TFTP packets, refer
to tftp_send() which relies on %c to generate multiple zero-terminated
strings in one buffer.
Introduce a variable to force the copy of one character in this case.
The new behaviour is consistent with non-tiny implementation.
Reported-by: Chintan Vankar <c-vankar@ti.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Paul HENRYS <paul.henrys_ext@softathome.com> says:
This serie of patches adds a new tool to authenticate files signed with
a preload header. This tool is also used in the tests to actually
verify the authenticity of the file signed with such a preload header.
Link: https://lore.kernel.org/r/20250224212055.2992852-1-paul.henrys_ext@softathome.com
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Baocheng Su <baocheng.su@siemens.com> says:
This introduces a sysinfo driver which also permits SMBIOS support.
The first 10 patches of v2 have already been applied. The remaining is
solely the sysinfo driver. To maintain consistency and ease of searching
through the history, the series title remains unchanged.
Link: https://lore.kernel.org/r/20250218023614.52574-1-baocheng.su@siemens.com
Allow for the sysinfo drivers to provide a system UUID to SMBIOS. Will
be first used by the IOT2050 boards.
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
This commit fixes an use after free introduced in Commit e55a4acb54
(" efi_loader: net: set EFI bootdevice device path to HTTP when loaded
from wget"). The logic in efi_net_set_dp is reworked so that when the
function is invoked it not only changes the value of the static variable
net_dp (this is how the function was implemented in e55a4acb54) but also
updates the protocol interface of the device path protocol in case efi
has started.
Fixes: e55a4acb54e8 ("efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget")
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
Refactor the entire kconfig page for mbedtls, adapt mbedtls makefile
and default config file using 'XPL_', in order to have independent
mbedtls kconfig options in U-Boot Proper, SPL, TPL and VPL.
User can choose legacy or mbedtls libraries for them independently.
Set mbedtls native hashing libraries as default when MBEDTLS_LIB,
SPL_MBEDTLS_LIB, TPL_MBEDTLS_LIB or VPL_MBEDTLS_LIB is selected.
If users prefer using U-Boot legacy hashing libraries, please select
MBEDTLS_LIB_HASHING_ALT, SPL_MBEDTLS_LIB_HASHING_ALT,
TPL_MBEDTLS_LIB_HASHING_ALT or VPL_MBEDTLS_LIB_HASHING_ALT for U-Boot
Proper, SPL, TPL and VPL respectively.
Moreover, rename a few kconfig options and update their descriptions to
improve the consistency of terminology.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
U-Boot requires to access x509_internal.h, mbedtls_sha256_context and
mbedtls_sha1_context in the porting layer, and this requires to
enable MBEDTLS_ALLOW_PRIVATE_ACCESS.
Enable it to mscode and pkcs7_parser to fix a mbedtls internal building
error when X509 is selected.
Moreover, Move it to a separate file to avoid enabling it in multiple
places.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Fixed the building failures when WGET_HTTPS,NET_LWIP and MBEDTLS_LIB
are selected due to a few incorrect kconfig dependencies.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The function is only used in the efi_memory.c module.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
When building with qemu_arm64_defconfig with CONFIG_CC_OPTIMIZE_FOR_DEBUG=y
and CONFIG_EFI_LOADER=n an error undefined reference to efi_add_memory_map_pg
occurs.
Move the EFI dependent part of lmb_map_update_notify() to the EFI
sub-system.
Reported-by: Liya Huang <1425075683@qq.com>
Acked-by: Liya Huang <1425075683@qq.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Instead of testing the value of parameter op at runtime use an enum to
ensure that only valid values are used.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Up to now root has been the parent device for all block devices created via
calling ConnectController(). This does not work well together with the
implementation of bootstd.
Add a dummy parent device for all EFI block devices.
With this change EFI block devices are also accessible via commands like
'cat', 'load', and 'ls'.
=> dm tree
Class Seq Probed Driver Name
-----------------------------------------------------------
efi 0 [ + ] EFI block driver `-- efi
blk 3 [ + ] efi_blk `-- efi.efiblk#0
partition 0 [ + ] blk_partition `-- efi.efiblk#0:1
=> ls efiloader 0:1
13 hello.txt
7 u-boot.txt
2 file(s), 0 dir(s)
=> cat efiloader 0:1 hello.txt
Hello world!
=> efidebug dh
0000000018df1700 (efi.efiblk#0:1)
/VenHw(dbca4c98-6cb0-694d-0872-819c650cb7b8)/HD(1,MBR,0xd1535d21,0x1,0x7f)
Block IO
Simple File System
Adjust the event dump unit test to consider the new event spy.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
For EFI runtime services, we manage to preserve string literals
by placing the .efi_runtime section just before .data and preserving
it when marking the runtime memory by marking surrounding boottime
code as runtime. This is ok for now but will break if we update any
linker scripts and decouple .text and .runtime sections.
So let's define the strings we used to compare in the appropriate
section for runtime services
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
After having been compared to a NULL value at efi_disk.c:426,
pointer 'part_info' is dereferenced at efi_disk.c:534.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add more EFI protocols GUIDs to the translation table used by
uuid_guid_get_str().
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Tom Rini <trini@konsulko.com>
When we squash imported mbedtls, the git submodule "framework" was
preserved in the commit. However, U-Boot itself does not use git
submodule, and provides no .gitmodules file to specify the submodule
repository.
This is normally not an issue when cloning U-Boot repository. However,
when U-Boot is imported as a submodule, this will break git option
`--recurse-submodules` as it fails to resolve "framework".
As we do not use the submodule, remove it to unbreak existing workflows.
Fixes: 12f1212e95fe ("Merge commit '0344c602eadc0802776b65ff90f0a02c856cf53c' as 'lib/mbedtls/external/mbedtls'")
Signed-off-by: ZHANG Yuntian <yt@radxa.com>
Implement library function strnstr().
Implement strstr() using strnstr().
Sort the includes.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
[jf: replace <stdint.h> by <limits.h>, folded from next patch]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
