Allow non-secure accesses only with SMMU peripherals. This would protect
the content in DDR secure region from accidentally modified by SMMU
peripherals.
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
These firewall configure settings are needed to disable firewall on
respective hardware component so both secure and non-secure transactions
are allowed.
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
These configuration settings are required to enable cache maintenance and
access between initiators and targets.
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
Branch contains bringup of Acer Iconia Tab A500 (codename picasso), a
Tegra 2 Android device with decent Linux kernel support. Ondevice tests
and U-Boot test suit all passed.
The device tree for rk3036 combined is now
available in the /dts/upstream directory.
Use imply OF_UPSTREAM to migrate all rk3036 boards.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
The Acer Iconia A500 is a tablet computer designed, developed and
marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor
and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB
and 32 GB models are available.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
u-boot-dfu-20250211:
CI:
- https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24556
Android:
- Handle boot images with missing DTB
Usb gadget:
- Fix nullptr in g_dnl when serial# is unset
- Add missing schedule() in f_mass_storage gadget
- Add support for STih407 in dwc3-generic
- Fix usb clocks on STih407
- Migrate STih407 to DM_USB_GADGET
On STi platforms, all clocks are enabled by BOOTROM, so CONFIG_CLK is
not set as no clock driver for STI exists.
As ehci-generic and ohci-generic drivers are used on platforms where
CONFIG_CLK is set, clk_get_bulk() returns-ENOSYS in case of
stih410-b2260.
To avoid this error, add fixed clocks for ehci and ohci nodes for
stih410-b2260 to fix the following errors:
Bus usb@9a03c00: ohci_generic usb@9a03c00: Failed to get clocks (ret=-19)
Port not available.
Bus usb@9a03e00: ehci_generic usb@9a03e00: Failed to get clocks (ret=-19)
Port not available.
Bus usb@9a83c00: ohci_generic usb@9a83c00: Failed to get clocks (ret=-19)
Port not available.
Bus usb@9a83e00: ehci_generic usb@9a83e00: Failed to get clocks (ret=-19)
Port not available.
scanning bus dwc3@9900000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250130163547.512990-2-patrice.chotard@foss.st.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
This patch enables switch auto-detction for mt7981 as some new mt7981
boards will use AN8855 ethernet switch.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Add bootph-all properties to I2C0 nodes to ensure the bus and EEPROM
are accessible across all stages. This enables reading the SoM
configuration at any point during the boot process.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
The change from pinctrl to pio was missing in mt7986-u-boot.dtsi and will
cause build failure. Now fix it.
Fixes: f1775996ba (mediatek: mt7986: move gpio-controller up and rename pinctrl to pio)
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
CONFIG_XILINX_OF_BOARD_DTB_ADDR holds DTB address which U-Boot is checking.
Currently address in binman match default value but macro can be used
directly.
Also sync node name (s/hash-1/hash/) and sync location to have the same
order load/hash/image.
All binman DTSes are compiled that's why also guard
CONFIG_XILINX_OF_BOARD_DTB_ADDR which depends on OF_BOARD || OF_SEPARATE
which is a problem for mini configurations which are using OF_EMBED.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a22c9671b965b222bfd419f5bfaee012929f3d88.1738659214.git.michal.simek@amd.com
Add ethernet aliases to CC (Carrier card) description to create a
connection which is used by fdt_fixup_ethernet() for updating
local-mac-address in DT.
On Kria SOM MAC address is read from i2c eeprom at start and based on it
environment variables are created. Without creating aliases U-Boot is not
able to inject local-mac-address DT property and OS won't get the same MAC
address unless another i2c read is happening in OS.
Also aliases are using string not phandle that's why full path has to be
provided but that shouldn't be a big issue because location of ethernet
controller is fixed.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6d360e71a0530d201578e27a6997dbd472772e39.1737466907.git.michal.simek@amd.com
Output images are generated via Binman only if SPL is enabled, as
there is no consumer for them otherwise. An #ifdef check ensures that
when SPL is enabled, Binman generates the U-Boot ITB. If SPL is disabled,
ITB generation is skipped since the ITB format is supported only by SPL.
Without SPL, generating such an image is unnecessary, as it would not be
used
The second reason is that when a DTB is passed, the current logic cannot
handle it without an additional step in U-Boot to parse an appended FIT
image and enable board-specific code to select the correct DTB config.
The MULTI_DTB_FIT configuration should be used if support for multiple
DTBs is required, but SPL is not being used.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7cba738ae36dacf7d1b0cfbaf13e0c9b3a0df225.1737462296.git.michal.simek@amd.com
Add support for the R-Car S4 Starter Kit with R8A779F4 SoC support.
This implementation natively uses OF_UPSTREAM to pull in most recent
DT. The defconfig is derived from S4 Spider, with reduced UART baud
rate to 921600 Bdps. The DT alias to rswitch is removed as the alias
should point to rswitch ports, not to rswitch itself, see [1].
[1] https://lore.kernel.org/linux-arm-kernel/20250118111344.361617-5-marek.vasut+renesas@mailbox.org/
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Christian Marangi <ansuelsmth@gmail.com> says:
This is the last batch of part to push actual support of
OF_UPSTREAM for the mediatek SoC.
The plan is to make the current downstream DTS on part with
upstream implementation so we can permit a gradual transition to
it while we don't cause any regression to any user.
This is to have the same node downstream and upstream.
Mediatek is working hard upstream to also push all the remaining
nodes.
All patch are the final changes after the pinctrl patch
merged previously.
All patch pass CI tests
Link: https://github.com/u-boot/u-boot/pull/731
Link: https://lore.kernel.org/r/20250127134046.26345-1-ansuelsmth@gmail.com
Add PCIe node for MT7981 with all the required properties to make PCIe
work.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Add USB PHY nodes for MT7981. These are needed for USB support and also
for PCIe support as the u3 PHY can also be used for PHY.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Move gpio-controller up to pinctrl node and rename label to "pio" to
match the label used in upstream kernel linux.
Update any DTS that reference the pinctrl to follow the new naming and
structure.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Move gpio-controller up to pinctrl node and rename label to "pio" to
match the label used in upstream kernel linux.
Update any DTS that reference the pinctrl to follow the new naming and
structure.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Rename reg-names to upstream linux format. Upstream linux drop the
"_base". To make use of upstream DTSI, align to the upstream naming.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Move gpio-controller up to pinctrl node and rename label to "pio" to
match the label used in upstream kernel linux.
Update any DTS that reference the pinctrl to follow the new naming and
structure.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Rename reg-names to upstream linux format. Upstream linux drop the
"_base". To make use of upstream DTSI, align to the upstream naming.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Rename reg-names to upstream linux format. Upstream linux drop the
"_base". To make use of upstream DTSI, align to the upstream naming.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
- Remove dt-bindings headers available in dts/upstream
- Fixes for stm32prog
- Enable CONFIG_SYS_64BIT_LBA for STM32MP15/13/25 defconfigs
- Add upport of ck_usbo_48m in pre-reloc stage for STM32MP13
- Clean env_get_location() for STM32MP1
- Fix board_get_usable_ram_top() to fix infinite loop in cache
management for STM32MP2.
- Fix ck_flexgen_08 frequency for STM32MP2
STM32 MCU:
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F469-Disco
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F769-Disco
-----BEGIN PGP SIGNATURE-----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=sq48
-----END PGP SIGNATURE-----
Merge tag 'u-boot-stm32-20250131' of https://source.denx.de/u-boot/custodians/u-boot-stm
STM32 MPU:
- Remove dt-bindings headers available in dts/upstream
- Fixes for stm32prog
- Enable CONFIG_SYS_64BIT_LBA for STM32MP15/13/25 defconfigs
- Add upport of ck_usbo_48m in pre-reloc stage for STM32MP13
- Clean env_get_location() for STM32MP1
- Fix board_get_usable_ram_top() to fix infinite loop in cache
management for STM32MP2.
- Fix ck_flexgen_08 frequency for STM32MP2
STM32 MCU:
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F469-Disco
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F769-Disco
Spurious characters are displayed on U-Boot console.
Usart2 clock is ck_flexgen_08 and its frequency is set
to an incorrect value.
Update ck_flexgen_08 frequency from 100MHz to 64MHz.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
The clock ck_usbo_48m is a clock source for RCC, so the ck_usbo_48m
clock provided by usbphyc need to be probed when RCC clock driver is
required, in pre-reloc stage.
This patch allow to remove the following warning:
clk_register: failed to get ck_usbo_48m device (parent of usbo_k)
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Weijie Gao <weijie.gao@mediatek.com> says:
This patch series add support for MediaTek MT7987 SoC with its reference
boards and related drivers.
This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these
boards. The clock, pinctrl drivers and the SoC initializaton code are also
included.
Link: https://lore.kernel.org/r/cover.1737621362.git.weijie.gao@mediatek.com
This patch adds general board files based on MT7987 SoC.
MT7987 uses one mmc controller for booting from both SD and eMMC, and the
pins of mmc controller are also shared with one spi controller.
So three configs are need for these boot types:
1. mt7987_rfb_defconfig - SPI-NOR (spi2) and SPI-NAND (spi0)
2. mt7987_emmc_rfb_defconfig - eMMC + SPI-NOR (spi2)
3. mt7987_sd_rfb_defconfig - SD + SPI-NOR (spi2)
Note: spi2 also supports booting from SPI-NAND, but not the default option.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
This patch adds basic support for MediaTek MT7987 SoC.
This includes files that will initialize the SoC after boot and
its device tree.
In order to maximize the continuous usable memory space, MT7987 has its
ATF BL31 loaded at the top of RAM. Since u-boot will also locate itself to
top of RAM, u-boot will read the actual memory region of BL31 and set
correct gd->ram_top to avoid u-boot overlapping with BL31.
As now support for mt7987 hasn't been submitted to linux kernel, all dts
filed will be put to arch/arm/dts. They'll be removed after successfully
being merged by linux kernel, and OF_UPSTREAM will also be switched on.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Samsung Galaxy Core Prime VE LTE is an entry-level PXA1908-based
smartphone. It has 1GB of DRAM, 8GB eMMC and USB connectivity.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Add initial support for Marvell PXA1908. The SoC has 4 Cortex-A53 cores,
a GC7000UL GPU and a variety of peripheral controllers.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
tee-os node is guarded by CONFIG_OPTEE. Since OPTEE adds driver support
for OP-TEE, the binary should then be packaged in the bootable image.
Remove the optional property to enforce this requirement.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Michael Chang <zhang971090220@gmail.com> says:
I am resubmitting the patch titled "Add bitbang feature for npcm8xx
and driver" for review and inclusion in the upstream project.
Driver didn't support bitbang feature.
Add bb_miiphy_bus function for driver and open feature for npcm8xx
the log is as below:
-------------------------------------------------
U-Boot 2024.10-g30b9cdaf2df5-dirty (Jan 09 2025 - 00:57:37 +0000)
CPU-0: NPCM845 A1 @ Model: Nuvoton npcm845 Development Board (Device Tree)
DRAM: 1 GiB
RNG: NPCM RNG module bind OK
OTP: NPCM OTP module bind OK
AES: NPCM AES module bind OK
SHA: NPCM SHA module bind OK
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
Core: 649 devices, 28 uclasses, devicetree: separate
WDT: Not starting watchdog@901c
MMC: sdhci@f0842000: 0
Loading Environment from SPIFlash... SF:
Detected w25q512jvq with page size 256 Bytes, erase size 64 KiB,
total 64 MiB
OK
In: serial@0
Out: serial@0
Err: serial@0
Net: eth0: eth@f0802000, eth1: eth@f0804000, eth3: eth@f0808000
Hit any key to stop autoboot: 0
U-Boot>
U-Boot>
U-Boot>setenv ipaddr 192.168.16.3
U-Boot>ping 192.168.16.12
eth@f0802000 Waiting for PHY auto negotiation to complete
......... TIMEOUT !
Could not initialize PHY eth@f0802000
eth@f0804000 Waiting for PHY auto negotiation to complete
......... TIMEOUT !
Could not initialize PHY eth@f0804000
Speed: 100, full duplex
Using eth@f0808000 device
host 192.168.16.12 is alive
Link: https://lore.kernel.org/r/20250117104540.1580343-1-zhang971090220@gmail.com
1. Fix mmc clock order of mt7981 to match the clock name
2. Limit the max clock of SD to 50MHz to meet SD Card Spec 2.0
3. Increase the CLK pin driving strength to 8mA
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Add driving settings for both SPI and SD/eMMC interfaces to support ensure
flash devices is accessible for ram-booting.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
This patch add all three GMACs nodes for mt7988. Each GMAC can be
configured to connect to different ethernet switches/PHYs.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
