When the sandbox timer is available, use it. This allows skipping
time in the tests (sandbox_eth_skip_timeout()).
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Use net_start_again() in do_ping() to determine if a failed ping should
be restarted on a different interface.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Implement net_start_again() when NET_LWIP=y in a very similar way to
NET. This will be used in a future commit to determine if a failed
ping needs to be tried again on a different interface.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The things that are done prior to executing a network command with
NET_LWIP are not consistent with what is done with NET. It impacts the
selection of the current device, and more precisely if the active device
is invalid NET would return an error while NET_LWIP would try to pick a
new device. This incorrect behavior was detected thanks to the eth_rotate
sandbox test (dm_test_eth_rotate()).
Fix it by re-using a sequence similar to what NET has in net_loop().
This piece of code is inserted in a function called net_lwip_eth_start()
renamed from net_lwip_eth_set_current().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini <trini@konsulko.com> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/20250401225851.1125678-1-trini@konsulko.com
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
Note that this undoes the changes of commit cf6d4535cc ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
When an ethernet driver fails to send a frame we print an error in lwIP.
But depending on how often that error is it might significantly delay
transmissions.
For example downloading a big file with the rpi4 spams the console with
'send error: -101', but removing the print makes the file download with
an average speed of ~8.5MiB/s since the packets are retransmitted.
So let's move it to a 'debug' in lwIP and expect ethernet drivers to handle
the failure if it's severe.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
do_ping() expects ping_loop() to return a negative value on error, so
that it can propagate it to the caller as CMD_RET_FAILURE. This is not
the case when no ethernet device is found, so fix that.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add Kconfig symbol LWIP_DEBUG_RXTX to dump the incoming and outgoing
packets when NET_LWIP=y.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Rename static function linkoutput() as net_lwip_tx() for consistency
with net_lwip_rx().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
net/lwip/wget.c/mbedtls_hardware_poll() is calling dm_rng_read() but
dependency is not recorded anywhere that's why depend on DM_RNG
when WGET_HTTPS is used.
Suggested-by: Michal Simek <michal.simek@amd.com>
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Move the initialization of the ethernet devices out of the new_netif()
function. Indeed, new_netif() accepts a struct device argument, which
is expected to be valid and active. The activation and selection of
this device are achieved by eth_init() (on first time the network
stack is used) and eth_set_current(). This is what takes care of the
ethrotate and ethact environment variables. Therefore, move these calls
to a new function: net_lwip_set_current(), and use it whenever a
net-lwip command is run.
This patch hopefully fixes the incorrect net-lwip behavior observed on
boards with multiple ethernet interfaces [1].
Tested on an i.MX8MPlus EVK equipped wih two ethernet ports. The dhcp
command succeeds whether the cable is plugged into the first or second
port.
[1] https://lists.denx.de/pipermail/u-boot/2025-January/576326.html
Reported-by: E Shattow <e@freeshell.de>
Tested-by: E Shattow <e@freeshell.de>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
eth_get_dev() returns NULL if no network device is available.
Not checking the return value leads to a crash when the device
pointer is dereferenced.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
If the dns command cannot find a network interface, we should return
CMD_RETFAIURE and not -1 (CMD_RET_USAGE).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Set the device path of the efi boot device to an HTTP device path
(as formed by efi_dp_from_http) when the next boot stage is loaded
using wget (i.e., when wget is used with wget_info.set_bootdev=1).
When loaded from HTTP, the device path should account for it so that
the next boot stage is aware (e.g. grub only loads its http stack if
it itself was loaded from http, and it checks this from its device path).
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This was marked as TODO in the code:
- Enable use of wget_with_dns even if CMD_DNS is disabled if
the given uri has the ip address for the http server.
- Move the check for CMD_DNS inside wget_with_dns.
- Rename wget_with_dns to wget_do_request
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
This patch comes as a companion to the same patch but for the legacy
net stack. Commit 1327c2a8d6 ("net/lwip: wget: integrate struct wget_info
into wget code") introduced function wget_fill_info() which retrieves
the headers from the HTTP server response. As we want to parse the
string in later patches we need to ensure that it is NUL terminated.
We must further check that wget_info->headers in not NULL.
Otherwise a crash occurs.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Commit 5907c81 ("net: lwip: Enable https:// support for wget") was not
correctly rebased on top of the changes introduced by Commit 6cc4d04
("net/lwip: wget: put server_name and port into wget_ctx") in next.
This commit re-applies a couple of lines from 6cc4d04.
Fixes: Commit 5907c81 ("net: lwip: Enable https:// support for wget")
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Commit 356011f7ac ("lwip: fix code style issues") has inadvertently
broken the support for the legacy syntax:
=> wget 192.168.0.16:test.bin
invalid uri, no file path
Invalid URL. Use http(s)://
The reason is two calls to strncpy() were replaced by strlcpy() without
paying attention to the fact that they are not equivalent in the present
case. Since we are using a character counter (n) and since we do not
depend on having a properly null-terminated string at each step in the
parsing, strlcpy() is not justified and strncpy() is the right tool for
the job. So use it again.
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The dhcp command is supposed to have the following syntax as per
"help dhcp":
dhcp [loadAddress] [[hostIPaddr:]bootfilename]
In other words, any arguments should be passed to an implicit
tftpboot command after the DHCP exchange has occurred.
Add the missing code to the lwIP version of do_dhcp().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
We currently provide entropy to mbedTLS using 8b chunks.
Take into account the 'len' parameter passed by MBed TLS to the entropy
gathering function instead. Note that the current code works because len
is always 128 (defined at compile time), therefore mbedtls_hardware_poll()
is called repeatedly and the buffer is filled correctly. But passing 'len'
to dm_rng_read() is both better and simpler.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The local variables ipstr, maskstr and gwstr in static function
get_udev_ipv4_info() cannot be pointers to read-only data, since
they may be written to in case the device index is > 0. Therefore
make them char arrays allocated on the stack.
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reported-by: Adriano Cordova <adrianox@gmail.com>
Link: https://lists.denx.de/pipermail/u-boot/2024-November/572066.html
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The local variables ipstr, maskstr and gwstr in static function
dhcp_loop() cannot be pointers to read-only data, since they may be
written to in case the device index is > 0. Therefore make them char
arrays allocated on the stack.
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Some Kconfig symbols introduced in commit 8cb330355b ("net: introduce
alternative implementation as net/lwip/") need a full description. The
NET symbol needs one, too.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The maximum length of a domain name is 253 as defined in RFC 1035.
So SERVER_NAME_SIZE should be 254 including NUL.
Fixes: 3c656c928b ("net: lwip: add wget command")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Each wget request now fills the struct wget_info. Also, the
efi bootdevice is now set conditionally to the set_bootdevice
variable in wget_info and a buffer size check is performed if
check_buffer_size is set.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Currently server_name and port are local variables in wget_loop.
This commit puts them inside ctx, so that they are accessible
from the http callbacks.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Let net/wget.c and net/lwip/wget.c depend on CONFIG_WGET, and
cmd/wget.c depend on CONFIG_CMD_WGET. This way, the wget code
can be used regardless of whether the wget command is available.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
With the recent changes of lwip & mbedTLS we can now download from
https:// urls instead of just http://.
Adjust our wget lwip version parsing to support both URLs.
While at it adjust the default TCP window for QEMU since https seems to
require at least 16384
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Add support for setting the TFTP block size. The default value (1468)
is fine for Ethernet and allows a better throughput than the TFTP
default (512), if the server supports the blksize option of course.
I tested this change with qemu_arm64_lwip_defconfig. The throughput is
now 875 KiB/s vs. 313 KiB/s before. That is still a low number, but I
think we can't expect more without implementing the windowsize option.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add support for the wget command with NET_LWIP. The command normally
expects a URL: wget [loadaddr] url, but it also accepts the legacy
syntax: wget [loadaddr] [server:]file.
The server IP may alternatively be supplied via ${httpserverip} which
has higher priority than ${serverip}.
Based on code initially developed by Maxim U.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Co-developed-by: Maxim Uvarov <muvarov@gmail.com>
Cc: Maxim Uvarov <muvarov@gmail.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add CMD_DNS when NET_LWIP is enabled to provide the dns command using
lwIP.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add support for the the ping command with NET_LWIP. The implementation
is derived from lwIP's contrib/apps/ping/ping.c.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Implement do_tftpb(). This implementation of the tftp command
supports an optional port number. For example:
tftp 192.168.0.30:9069:file.bin
It also supports taking the server IP from ${tftpserverip} if
defined, before falling back to ${serverip}.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add what it takes to enable NETDEVICES with NET_LWIP and enable DHCP as
well as the dhcp command. CMD_TFTPBOOT is selected by BOOTMETH_EFI due
to this code having an implicit dependency on do_tftpb().
Note that PXE is likely non-fonctional with NET_LWIP (or at least not
100% functional) because DHCP option 209 is not supported by the lwIP
library. Therefore, BOOTP_PXE_DHCP_OPTION cannot be enabled.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by
adding a new net/lwip/ directory and the NET_LWIP symbol. Network
support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent
commits will introduce the lwIP code, re-work the NETDEVICE integration
and port some of the NET commands and features to lwIP.
SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols
that are part of NET (such as arp_init(), arp_timeout_check(),
arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be
added later.
Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP
because of dependencies on net_loop(), tftp_timeout_ms,
tftp_timeout_count_max and other NET things. Let's add a dependency on
!NET_LWIP for now.
SANDBOX can select NET_LWIP but doing so will currently disable the eth
dm tests as well as the wget tests which have strong dependencies on the
NET code.
Other adjustments to Kconfig files are made to fix "unmet direct
dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when
the default networking stack is set to NET_LWIP ("default NET_LWIP"
instead of "default NET" in Kconfig).
The networking stack is now a choice between NO_NET,
NET and NET_LWIP. Therefore '# CONFIG_NET is not set' should be
'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
