Add support for the i.MX8 MEDIAMIX domain which is driving the power
over the whole display/rendering pipeline.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
These are all the clocks needed to get an LCD panel working, going
through one of the LCDIF and the LDB. The media AXI and APB clocks are
also described.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reparenting a clock C with a new parent P means that C will only
continue clocking if P is already clocking when the mux is updated. In
case the parent is currently disabled, failures (stalls) are likely to
happen.
This is exactly what happens on i.MX8 when enabling the video
pipeline. We tell LCDIF clocks to use the VIDEO PLL as input, while the
VIDEO PLL is currently off. This all happens as part of the
assigned-clocks handling procedure, where the reparenting happens before
the enable() calls. Enabling the parents as part of the reparenting
procedure seems sane and also matches the logic applied in other parts
of the CCM.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
It is very surprising that such an uclass, specifically designed to
handle resources that may be shared by different devices, is not keeping
the count of the number of times a power domain has been
enabled/disabled to avoid shutting it down unexpectedly or disabling it
several times.
Doing this causes troubles on eg. i.MX8MP because disabling power
domains can be done in recursive loops were the same power domain
disabled up to 4 times in a row. PGCs seem to have tight FSM internal
timings to respect and it is easy to produce a race condition that puts
the power domains in an unstable state, leading to ADB400 errors and
later crashes in Linux.
CI tests using power domains are slightly updated to make sure the count
of on/off calls is even and the results match what we *now* expect.
As we do not want to break existing users while stile getting
interesting error codes, the implementation is split between:
- a low-level helper reporting error codes if the requested transition
could not be operated,
- a higher-level helper ignoring the "non error" codes, like EALREADY and
EBUSY.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
There are already several helpers to find a udevice based on its
position in a device tree, like getting a child or a node pointed by a
phandle, but there was no support for graph endpoints, which are very
common in display pipelines.
Add a new helper, named uclass_get_device_by_endpoint() which enters the
child graph reprensentation, looks for a specific port, then follows the
remote endpoint, and finally retrieves the first parent of the given
uclass_id.
This is a very handy and straightforward way to get a bridge or a panel
handle.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Naming between the parameter list, the prototype and the main comment do
not match. Fix the comment which seems the be the one that is incorrect.
Fixes: 9057077cf4e1 ("core: ofnode: add of_graph parsing helpers")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Caleb Connolly <caleb.connolly@linaro.org> says:
SCSI devices like UFS may maintain their own cache to speed up writes,
however this is lost on board reset (and may be lost on device removal
or reset by OS drivers).
Currently this can be worked around by "waiting for a while" after
writing data to disk, but of course this is not an acceptable solution.
Ideally U-Boot would have a mechanism to flush caches during board
reset, but until that logic is hooked up let's be sure that all writes
are actually propagated to the storage device so that we don't lose data
on board reset.
The same logic was already implemented just for the AHCI backend, this
duplicated logic has been removed and support for the SYNC_CACHE command
is added to AHCI.
This is particularly noticeable during capsule updates, since the update
file is deleted and the board is reset immediately afterwards which
resulted in the same capsule update being applied over and over again.
This specifically fixes Qualcomm SDM845 devices with UFS 2.1, but likely
all UFS devices that use a cache.
Link: https://lore.kernel.org/r/20250326-scsi-sync-on-write-v2-0-12ab05bd464b@linaro.org
The SCSI layer now issues a SYNC_CACHE command after every write to
ensure there is no data loss due to a board reset after write.
Implement support for this command and remove the same logic from the
ATA write path to be consistent with other SCSI backends.
Ranges are not supported and the whole cache will be flushed in all
cases.
This was done per iteration in ata_scsiop_read_write(), but it's not
clear why this was the case, calling it once for the entire write ought
to achieve the same result.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
We don't have a mechanism to safely shutdown block devices prior to a
baord reset or driver removal. Prevent data loss by synchronizing the
SCSI cache after every write.
In particular this solves the issue of capsule updates looping on some
devices because the board resets immediately after deleting the capsule
file and this write wouldn't be flushed in time.
This may impact NAND wear, but should be negligible given the usecases
for disk write in U-Boot.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
This clears the 6th byte of cmd twice rather than setting the 9th byte
to 0. Fix it.
The only other command that sets the 9th byte is the 64-bit read, so
this likely never caused issues in practise.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Recent addition of support for SDM660 inadvertently broke USB PHY power
on sequence on RB1/RB2 and others with following error:
starting USB...
Bus usb@4e00000: QUSB2PHY pll lock failed: status reg = 0
qcom-qusb2-phy phy@1613000: PHY: Failed to power on phy@1613000: -16.
Can't power on PHY0
probe failed, error -16
No USB controllers found
The root cause was the addition of flag se_clk_scheme_default which was
configured correctly for SDM660 but incorrect for all other supported
SoC. Fix that by properly assignment as per upstream Linux driver.
Fixes: 475497dc3c15 ("phy: Add SDM660 support to Qualcomm QUSB2 phy")
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by:
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250410080027.208674-3-sumit.garg@kernel.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add support for the resource power manager clocks over SMD/GLINK to be
stubbed.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250407175617.3494506-4-jorge.ramirez@oss.qualcomm.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
On v5 & v7 controllers, multiple mapping for different
Execution Environment exists, if the mapping owner is for
a different Execution Environment we can only read and
not write any data.
To allow us to find a Write mapping for our Execution
Environment, we can overwritte a mapping if we encounter
a new one which we own.
Implement this logic, the result is the same mapping
table as in Linux.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: caleb.connolly@linaro.org # sdm845
Link: https://lore.kernel.org/r/20250328-topic-sm8x50-spmi-fix-v1-4-a7548d3aef0d@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The handling of the table mapping for V5 & V7 needs more work
to handle the duplicate read-only & read-write mappings,
so to make code cleaner add a switch/case and move the
v5 & v7 mapping handler in a separate function.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: caleb.connolly@linaro.org # sdm845
Link: https://lore.kernel.org/r/20250328-topic-sm8x50-spmi-fix-v1-2-a7548d3aef0d@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The SPMI_MAX_CHANNELS_Vx are only the maximum channels supported
by the controller, but the real number of channels mapped on this
system can be read from a register, so take this info.
This allows no to overlap on the second controller present on
the V7 SPMI arbiter, otherwise we would also parse the mapping
of the second SPMI bus and we would bet the wrong IDs.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: caleb.connolly@linaro.org # sdm845
Link: https://lore.kernel.org/r/20250328-topic-sm8x50-spmi-fix-v1-1-a7548d3aef0d@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
These are all usually enabled, hence we don't (yet) bother configuring
their RCG src clocks.
Add them to remove the errors about missing clocks when the UFS and MMC
drivers probe.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250317-sc7280-mmc-ufs-clocks-v1-2-38e05c16511b@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add pinctrl and GPIO driver for SA8775P. Driver code is based on the
similar U-Boot and Linux drivers.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250324080504.2385747-1-quic_varada@quicinc.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add the PMC8380 regulator data found on the Qualcomm SA8775P platform.
The tables are imported from the Linux driver.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250324113030.2597986-1-quic_varada@quicinc.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add regulator driver that allow some Qualcomm PMIC to
feed VBUS output to peripherals that are connected.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250227094911.497219-3-rui.silva@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
These are necessary for USB gadget to come up properly, now that
qcom_gate_clk_en fails on unknown clocks.
Signed-off-by: Sam Day <me@samcday.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250319-sdm845-usb-clocks-v1-1-ddea854f62ec@samcday.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Imported from Linux driver.
Note that already existing but previously unused member of
struct qusb2_phy::has_se_clk_scheme is now utilized for it's
purpose.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250325083713.2425430-1-alexeymin@postmarketos.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Compared to SAM9X5 the only difference is the DPRAM memory from the
USB High Speed Device Port (UDPHS) hardware block was increased,
so we can reuse the same endpoint data.
Also add compatible "microchip,sam9x60-udc".
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250331162611.1557759-2-admin@hifiphile.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
In fsg_common_init, we allocate some buffers via memalign().
However, these buffers are never freed.
Because of that, we cannot call => ums command multiple times on boards
with low memory (CONFIG_SYS_MALLOC_LEN=0x81000):
=> ums 0 mmc 2
UMS: LUN 0, dev mmc 2, hwpart 0, sector 0x0, count 0x3a3e000
|crq->brequest:0x0
CTRL+C - Operation aborted
=> ums 0 mmc 2
UMS: LUN 0, dev mmc 2, hwpart 0, sector 0x0, count 0x3a3e000
failed to start <NULL>: -12
g_dnl_register: failed!, error: -12
g_dnl_register failed
Make sure the fsg buffers are freed when the gadget is unbound by
calling fsg_common_release() in fsg_unbind().
Reported-by: Zixun LI <admin@hifiphile.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Zixun LI <admin@hifiphile.com> # on SAM9X60
Link: https://lore.kernel.org/r/20250328-ums-gadget-leak-v1-4-3b677db99bde@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
fsg_common_init() can fail when memory is low. In that case, it returns
PTR_ERR().
fsg_add() does not check for failure, and thus dereferences an invalid
fsg_common later, which crashes.
Verify if we receive an error from fsg_common_init() and handle it
gracefully.
Reported-by: Zixun LI <admin@hifiphile.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Zixun LI <admin@hifiphile.com> # on SAM9X60
Link: https://lore.kernel.org/r/20250328-ums-gadget-leak-v1-3-3b677db99bde@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
The kref structure is locally to f_mass_storage and is not used
anywhere beside in fsg_common_release().
Remove it and use struct fsg_common* instead.
No functional change.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Zixun LI <admin@hifiphile.com> # on SAM9X60
Link: https://lore.kernel.org/r/20250328-ums-gadget-leak-v1-1-3b677db99bde@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Fastboot works either over TCP, UDP or USB. The latter doesn't have
anything to do with networking, thus should work just fine with
regardless which network stack is selected. In practice, header symbols
are used inside common code paths. Add some ifdeffery to guard against
that.
This will make fastboot over USB work with the new LWIP stack.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20250312073655.2281377-1-mwalle@kernel.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Andre Przywara <andre.przywara@arm.com> says:
C's implicit fallthrough behaviour in switch/case statements can lead to
subtle bugs. Quite some while ago many compilers introduced warnings in
those cases, requiring intentional fallthrough's to be annotated.
So far we were not enabling that compiler option, so many ambiguities
and some bugs in the code went unnoticed.
This series adds the required annotations in code paths that the first
stage of the U-Boot CI covers. There is a large number of cases left
in the libbz2 code. The usage of switch/case is borderline insane there,
labels are hidden in macros, and there are no breaks, but just goto's.
Upstream still uses very similar code, without any annotations. I still
am not 100% sure those are meant to fall through or not, and plan to do
further investigations, but didn't want to hold the rest of the patches
back. You can see for yourself by applying patch 18/18 and building for
sandbox64, for instance.
Because of this we cannot quite enable the warning in the Makefile yet,
but those fixes are worth regardless, and be it to increase readability.
Please note that those patches do not fix anything, really, they just add
those fallthrough annotations, so the series is not really critical.
Link: https://lore.kernel.org/r/20250327153313.2105227-1-andre.przywara@arm.com
The raw NAND flash code uses an implicit switch/case fallthrough to
share code when dealing with different ECC modes, and also when handling
some read command.
Add our "fallthrough;" statement-like macro before the respective labels
in the NAND code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
This copies the fallthrough annotations that the original kernel code
gained, before this function got refactored there.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michael Trimrachi <michael@amarulasolutions.com>
The SPI NOR code uses an implicit switch/case fallthrough when checking
different vendors to determine how to deal with extended addressig modes.
Add our "fallthrough;" statement-like macro before some label in the
4-byte addressing mode code, to avoid a warning when GCC's
-Wimplicit-fallthrough warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The UBI code uses an implicit switch/case fallthrough when handling two
related cases of bad header errors. Also there is a switch/case for unit
prefix handling (G/M/K), which accumulates multiplications.
Add our "fallthrough;" statement-like macro before the respective labels
in both cases, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
The E1000 driver uses an implicit switch/case fallthrough for sharing
some code supporting different PHYs.
Add our "fallthrough;" statement-like macro before the two labels in
e1000_set_phy_type(), to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The generic DM video code uses an implicit switch/case fallthrough to
provide fallback code paths when certain colour depths are not enabled.
Add our "fallthrough;" statement-like macro to the video_fill() function
to avoid a warning when GCC's -Wimplicit-fallthrough warning option is
enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The USB XHCI code uses an implicit switch/case fallthrough to share code
for handling full speed and low speed transfers.
Add our "fallthrough;" statement-like macro before the second label in
the XHCI code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The USB OCHI code uses an implicit switch/case fallthrough after checking
for valid descriptor IDs.
Add our "fallthrough;" statement-like macro before the default branch in
the OHCI code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Allwinner sun8i EMAC driver uses an implicit switch/case fallthrough
when setting up the MAC/PHY communication protocol, to handle the case
when RMII is requested, but would not be supported by the hardware.
Add our "fallthrough;" statement-like macro before the default branch in
sun8i_emac_set_syscon(), to avoid a warning when GCC's
-Wimplicit-fallthrough warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The fastboot command handling uses an implicit switch/case fallthrough
when receiving the OEM_CONSOLE command, but when this command is not
enabled in Kconfig, to report this command as unknown.
Add our "fallthrough;" statement-like macro before the default branch in
the fastboot code, to avoid a warning when GCC's -Wimplicit-fallthrough
warning option is enabled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Even though we seem to catch POWEROFF and EFSCLEAR commands in the THOR
protocol request handling, we ultimately do not seem to handle them
(apart from sending a response), so those commands still print an error
message.
Annotate the switch/case fallthrough in this case, to make this clear to
the compiler.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
In the case of a memory allocation error, the ahci_port_start() function
tries to free the `pp' pointer.
This pointer was not dynamically allocated but does in fact point to an
element of the port[] array member of the struct ahci_uc_priv.
Remove the erroneous call to free() to fix this.
Fixes: 4782ac80b02f ("Add AHCI support to u-boot")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jason Jin <jason.jin@freescale.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Note that this undoes the changes of commit cf6d4535cc4c ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
