SPL_TEXT_BASE is used as the load address for the main domain SPL on k3
platforms.
Since the config value is the same for every board, this patch sets the
value 0x80080000 as default for all 64-bit ARCH_K3, 0x43c00000 as
default for the R5 cores and deletes the instances of SPL_TEXT_BASE in
individual defconfigs.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
As the code is today, we get a warning about "select" statements on
"choice" options not doing anything. However, it also works as intended
because SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is the default option
within that choice statement. To guard against future regressions, make
the choice statement in common/spl/Kconfig have an explicit default if
MVEBU_SPL_BOOT_DEVICE_MMC.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Andre Przywara <andre.przywara@arm.com> says:
C's implicit fallthrough behaviour in switch/case statements can lead to
subtle bugs. Quite some while ago many compilers introduced warnings in
those cases, requiring intentional fallthrough's to be annotated.
So far we were not enabling that compiler option, so many ambiguities
and some bugs in the code went unnoticed.
This series adds the required annotations in code paths that the first
stage of the U-Boot CI covers. There is a large number of cases left
in the libbz2 code. The usage of switch/case is borderline insane there,
labels are hidden in macros, and there are no breaks, but just goto's.
Upstream still uses very similar code, without any annotations. I still
am not 100% sure those are meant to fall through or not, and plan to do
further investigations, but didn't want to hold the rest of the patches
back. You can see for yourself by applying patch 18/18 and building for
sandbox64, for instance.
Because of this we cannot quite enable the warning in the Makefile yet,
but those fixes are worth regardless, and be it to increase readability.
Please note that those patches do not fix anything, really, they just add
those fallthrough annotations, so the series is not really critical.
Link: https://lore.kernel.org/r/20250327153313.2105227-1-andre.przywara@arm.com
Depending on the various MMC boot configurations, we might end up with
trying filesystem mode when a raw image boot failed. This fall-through
in the switch/case statement is explained in a comment, but this is not
visible to the compiler, which still will complain.
Add the proper compiler-visible annotation, to allow enabling the
compiler check in the future.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Sam Edwards <cfsworks@gmail.com> says:
This is v2 of my "misc. fixes" series, sent to prepare the codebase for more
direct LLVM support in the near future. This series contains several fixes that
I found in the process of preparing that support and which address issues
independent of any future feature or enhancement. I am sending these now, both
so that their inclusion is not delayed by discussion on my upcoming series and
to make the latter more manageable.
Link: https://lore.kernel.org/r/20250315221813.1265193-1-CFSworks@gmail.com
While the image size is generally a multiple of 8 bytes, this is not
actually guaranteed; some linkers (like LLD) will shave a few bytes off
of the end of output sections if there are no content bytes there. Since
libfdt imposes a hard rule of 8-byte alignment, make the SPL also be
explicit about the alignment when loading the FDT.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
libfdt 1.6.1+ requires the FDT to be 8-byte aligned and returns an error
if not. OpenSBI 1.0+ includes this version of libfdt and will also
reject misaligned FDTs.
However, OpenSBI cannot indicate the error to the user: since it cannot
access the serial console, it can only silently hang. This proved very
difficult to diagnose without proper debugging facilities. Therefore,
give the U-Boot SPL, which *can* print error messages, an additional
check for proper FDT alignment. Hopefully this saves a lot of
development cycles if another developer encounters alignment problems.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
During linux build process the header size is computed including the BSS
whereas it's removed when creating the uncompressed image. Therefore the
size of the uncompressed image on filesystem will be smaller than the
size specified in the header.
This causes issues when loading the kernel image from the SPL (as in
falcon boot) with spl_load since it compares the read file size from the
FS to the header size form the image. Which leads to the following check
in `include/spl_load.h` failing to -EIO when loading kernel image:
return read < spl_image->size ? -EIO : 0;
Therefore we should return the header size back to spl_load instead of
the file size in falcon boot when not loading a FIT image.
Bug report:
https://lore.kernel.org/u-boot/20250214111656.2358748-1-anshuld@ti.com/
Fixes: 775074165d ("spl: Add generic spl_load function")
Reported-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
CFG_SYS_SPI_* are used in falcon boot to specify the offsets and size of
the respective payloads. This patch moves them to Kconfig keeping the
values consistent for each of the affected boards.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reorder the Kconfig defaults for the maximum SPL size, to make the
Allwinner specific values more readable and extensible: many older SoCs
need to be limited to 32KB, so make this the last ARCH_SUNXI entry, used
as a fallback unless explicitly overridden before.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
VPL has the same needs as TPL in situations where the stack is at the
top of SRAM. Add an option for this and implement it for arm
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that we have the same option for SPL and TPL, simplify the logic for
determining the initial stack.
Note that this changes behaviour as current SPL_STACK is a fallback for
TPL. However, that was likely unintended and can be handled with Kconfig
defaults if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Suggested-by: Tom Rini <trini@konsulko.com>
At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.
Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Resync defconfig files]
The most common word for features that make a platform work is to use
'HAVE_xxx'. Rename this option to match.
Update the help to use the word 'phase' rather than 'stage', since
that is the current terminology. Also clarify that, absent this setting,
the stack pointer generally comes from the value used by U-Boot proper,
rather than SPL.
Move the option just above TPL_STACK which depends on it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Judith Mendez <jm@ti.com> says:
Some K3 devices like am62x and am64x have a M4 processor in the MCU
voltage domain. This patch series introduces remoteproc M4 driver which
will be used to load firmware into and start the M4 remote core.
This series also adds support for R5F cores on am64x SoCs in patch 2 and
sets up environment to load FW in remote cores in patch 3,4,5.
This patch series also enables remoteproc drivers by default as per what
remoteproc sybsystem is supported per SoC, thus all remoteproc options
are now deleted in configs/* since they are no longer required.
This patch series was tested on am64x EVM, am62x SK, am62ax SK,
am62px SK boards.
Any additional tested by's are welcome since I was not able to
test any additional boards.
Tested by running the following commands in u-boot prompt:
=> setenv dorprocboot 1
=> run boot_rprocs
Link: https://lore.kernel.org/r/20250210202944.1071931-1-jm@ti.com
If building for v7R and K3 architecture, enable SPL
remoteproc so that it does not have to be defined in each
board defconfig file.
Signed-off-by: Judith Mendez <jm@ti.com>
When VBE operates within VPL it does not want the FDT to be changed.
Provide a way to disable this feature.
Move the FIT_IMAGE_TINY condition out of spl_fit_record_loadable() so
that both conditions are together. This makes the code easier to
understand.
Replace the existing fit_loaded member, which is no-longer used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for moving from TPL->VPL->SPL so that the VPL build can fit
properly into the boot flow.
Use #ifdefs to avoid creating unwanted symbols which Binman would then
try (and perhaps fail) to provide.
Add debugging to indicate the next phase.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the simple FIT-loader always loads images, ignoring whether
they are intended for the next phase or not.
VBE packages up several images in the same FIT, some destined for VPL
and some for SPL. Add logic to check the phase before loading the
image. Return -EPERM in that case and handle it gracefully.
Fix a unnecessary re-computation of read_offset while here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The size of some malloc() fields has reduced on 64-bit machines, but
the spl_reloc code was not updated. Fix this to avoid a compiler
warning.
Also update for the new xPL naming.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This function can only be used with FITs that use embedded data. Rename
it so this is clear.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass <sjg@chromium.org> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot. It mostly focuses on introducing a relocating
SPL-loader so that VBE can run in the limited amount of SRAM available
on many devices.
Another minor new feature is support in VBE for specifying the image
phase when loading from a FIT. This allows a single FIT to include
images for several boot phases, thus simplifying image-creation.
One lingering niggle in this series is that it has a different code path
for sandbox, since it does not support the relocating jump. It should be
possible to resolve this with additional work, but I have not attempted
this so far.
For v2, I have split the first patch into 5 pieces, to make it easier to
see the code-size impact, plus added a few tweaks to reduce code size.
Again, only MMC is supported so far.
Looking ahead, series G will have some more plumbing and H some rk3399
pieces. That should be enough to complete these feature.
Here is a run in my lab, with the VBE ABrec bootmeth. You can see that
VPL runs before memory is set up. SPL sets up memory and can be upgraded
in the field reliably.
$ ub-int vbe
Building U-Boot in sourcedir for rk3399-generic
Bootstrapping U-Boot from dir /tmp/b/rk3399-generic
Writing U-Boot using method rockchip
U-Boot TPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
Using 'config-3' configuration
Trying 'image-vpl' firmware subimage
Using 'config-3' configuration
Trying 'fdt-3' fdt subimage
U-Boot VPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
Starting with empty state
VBE: Firmware pick A at 800000
Using 'config-3' configuration
Trying 'spl' firmware subimage
Using 'config-3' configuration
Trying 'fdt-3' fdt subimage
Channel 0: DDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: DDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
U-Boot SPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58 -0700)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
VBE: Firmware pick A at 900000
load_simple_fit: Skip load 'atf-5': image size is 0!
Relocating bloblist ff8eff00 to 100000: done
ns16550_serial serial@ff1a0000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
U-Boot 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58 -0700)
SoC: Rockchip rk3399
Reset cause: POR
Model: Firefly-RK3399 Board
DRAM: 4 GiB (effective 3.9 GiB)
Core: 314 devices, 33 uclasses, devicetree: separate
MMC: mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Model: Firefly-RK3399 Board
Net: PMIC: RK808
eth0: ethernet@fe300000
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus usb@fe900000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus usb@fe900000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Link: https://lore.kernel.org/r/20250116012723.2820301-1-sjg@chromium.org
This is fairly easy to use. The SPL loader sets up some fields in the
spl_image_info struct and calls spl_reloc_prepare(). When SPL is ready
to do the jump it must call spl_reloc_jump() instead of jump_to_image().
Add this logic.
Signed-off-by: Simon Glass <sjg@chromium.org>
When one xPL phase wants to jump to the next, the next phase must be
loaded into its required address. This means that the TEXT_BASE for the
two phases must be different and there cannot be any memory overlap
between the code used by the two phases. It also can mean that phases
need to be moved around to accommodate any size growth.
Having two xPL phases in SRAM at the same time can be tricky if SRAM
is limited, which it often is. It would be better if the second phase
could be loaded somewhere else, then decompressed into place over the
top of the first phase.
Introduce a relocating jump for xPL to support this. This selects a
suitable place to load the (typically compressed) next phase, copies
some decompression code out of the first phase, then jumps to this code
to decompress and start the next phase.
This feature makes it much easier to support Verified Boot for Embedded
(VBE) on RK3399 boards, which have 192KB of SRAM.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function will be used by the relocating jumper too, so add a
typedef to the header file to avoid mismatches.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than doing autoprobe within the driver model code, move it out to
the board-init code. This makes it clear that it is a separate step from
binding devices.
For now this is always done twice, before and after relocation, but we
should discuss whether it might be possible to drop the post-relocation
probe.
For boards with SPL, the autoprobe is still done there as well.
Note that with this change, autoprobe happens after the
EVT_DM_POST_INIT_R/F events are sent, rather than before.
Link: https://lore.kernel.org/u-boot/20240626235717.272219-1-marex@denx.de/
Signed-off-by: Simon Glass <sjg@chromium.org>
The variable 'ret' is defined twice, which is not intended. This may
have been a local merge error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 2eefeb6d893 ("spl: Report a loader failure")
U-Boot uses ulong for addresses. It is confusing to use uintptr_t in a
few places, since it makes people wonder if the types are compatible.
Change the few occurences in SPL to use ulong
Signed-off-by: Simon Glass <sjg@chromium.org>
The current check looks only at SPL, but TPL or VPL might have a
different setting. Update the condition.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current check looks only at SPL, but TPL or VPL might have a
different setting. Update the condition.
Signed-off-by: Simon Glass <sjg@chromium.org>
If a loader returns an error code it is silently ignored. Show a message
to at least provide some feedback to the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
The for() loop ends up being in the code even if the log_debug() does
nothing. Add a condition to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
The FIT name in RISC-V Falcon mode should be different from that in
normal boot mode; it is called linux.itb. If the setting is missing
in common/spl, the normal boot file name will be used.
Signed-off-by: Randolph <randolph@andestech.com>
This reverts commit 1fdf53ace1, reversing
changes made to e5aef1bbf1.
I had missed that this caused too much size growth on rcar3_salvator-x.
Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot. It mostly focuses on SPL tweaks and adjusting what
fatures are available in VPL.
Link: https://lore.kernel.org/r/20241207172412.1124558-1-sjg@chromium.org
The variable 'ret' is defined twice, which is not intended. This may
have been a local merge error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 2eefeb6d893 ("spl: Report a loader failure")
U-Boot uses ulong for addresses. It is confusing to use uintptr_t in a
few places, since it makes people wonder if the types are compatible.
Change the few occurences in SPL to use ulong
Signed-off-by: Simon Glass <sjg@chromium.org>
The current check looks only at SPL, but TPL or VPL might have a
different setting. Update the condition.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current check looks only at SPL, but TPL or VPL might have a
different setting. Update the condition.
Signed-off-by: Simon Glass <sjg@chromium.org>
If a loader returns an error code it is silently ignored. Show a message
to at least provide some feedback to the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
The for() loop ends up being in the code even if the log_debug() does
nothing. Add a condition to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
If BIOSEMU is compiled for RISC-V (SiFive Unmatched board) and the function
dm_pci_run_vga_bios() is executed, U-Boot stops with error message saying
that the SPL malloc pool is too small. So increase the default pool size
when both BIOSEMU and RISCV parameters are set.
Signed-off-by: Yuri Zaporozhets <yuriz@qrv-systems.net>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
