The EFI sub-system needs the load address and not the entry point
to boot the binary passed from the bootm command. The entry point
is derived from the PE-COFF header of the binary.
Fixes: ecc7fdaa9e ("bootm: Add a bootm command for type IH_OS_EFI")
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini <trini@konsulko.com> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/20250401225851.1125678-1-trini@konsulko.com
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEtlGhRjxqvtBpDFXNBYMxKxlfZLYFAmf5HL8ACgkQBYMxKxlf
ZLaY6A//Ry5wkX1f/WTVFUO6gBJQom6hsEpkNgYwtgzaWOWhqvR53e5sbsiMPKnO
5BRtKhrs0Jp2/kl06+k5tsGQbr3rogvwNS9m8DFyF2Hfq7uT2ooQKzxeBM9MaGhI
p+7d92JjcHeYP7ejWcoAnag0ZvM/3iofdsrRcGsFjbYbcbAkBtAUDj2RqaZFIAFk
A6g6/IZ62K6QH24oAMPv5yR4ru2tfzRMJHdZh79FHMXNp9wOLgMsHAV8NToQ/ZHU
ACn9EHc4g9aI8h8gXPTEjCzOx6saYcmV+zzn0mSeICCSbOqvJ/C2/96NUlD5BW8/
XFIeuBNgnHyxv4O3idFpyaxF34SMp2j2dDAIQFLN+0lG1M1Zi75pqf9UzlSvvSjm
d1xd/LbrOEwNEyTKG7Ss0e3nf03lP22s2COpFUPJAijkfRZ8K/Y8RISeQv+MJKwa
AZqYofLua0Uo0kuKTiHuOdD5oWUxmEcjtisaP/X9hcXWteTillntp120qm/a93s2
X015V56B/e2+uf9xAQW+iqnrcgpMGKffqbs7tVhVr3SDTDa+c4/c6EXX2naqzgDQ
T/S0hetOONuNXZvyAguUq5HKNI0IoC+OZQhA1uIgq+JyV/7qgENyrERlt29435cg
NAr+410m0OKYUGHz5xwLSUh2j68v/4fZj7I4nZt4eYjEfYk/2dI=
=Ep2x
-----END PGP SIGNATURE-----
Merge tag 'qcom-for-2025.07' of https://source.denx.de/u-boot/custodians/u-boot-snapdragon
Qualcomm changes for v2025.07:
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/25653
There's been a surprising amount of activity lately on the Qualcomm
side with the two oldest boards getting some fresh attention and a lot
of cleanup and polish going on across the board.
* SDM660 gets USB phy fixes and a pinctrl driver
* The recently added SA8775P/QCS9100 SoC gets a pinctrl driver
* The Qualcomm pinctrl driver now handles reserved pins correctly,
fixing crashes on some boards when running "gpio status -a"
* OF_UPSTREAM_BUILD_VENDOR is enabled in qcom_defconfig
* SDM845 and SC7280 get missing clocks added (since we're now stricter
about those). This gets USB working more reliably in more cases.
* DM_USB_GADGET is enabled for all boards using DWC3 and fasbtoot is
enabled too
* A bug in the livetree fixup code is fixed (making USB work on a lot
more platforms)
* Button label lookup is made case insensitive* bootretry becomes more dynamic, allowing it to be hijacked to make a
"persistent" boot menu that allows dropping to U-Boot shell later on
* A new qcom-phone.config fragment is added along with a phone-specific
default environment and phone-specific debugging/bringup docs. These
make U-Boot more usable on devices without a serial port or keyboard.
* The db820c gets fixed up and updated documentation
* The db410c also gets some love and modernisation as well as a new
reviewer.
* A new driver is added for the USB VBUS regulator found on various
Qualcomm PMICs
* The Qualcomm SPMI driver gets some fixes and cleanup for SPMI v5 and
v7 support.
Documentation:
* Update authenticated capsules documentation
UEFI:
* add support for loading FIT images including initrd
- efi_loader: efi_load_initrd: provide a memory mapped initrd
- efi_loader: binary_run: register an initrd
- bootm: add support for initrd in do_bootm_efi
* efi_selftest: remove un-needed NULL checks
* efi: Fix efiboot for payloads loaded from memory
* Print extra information from the bootmgr
* Move public cert for capsules to .rodata
* set EFI capsule dfu_alt_info env explicitly
* Make FDT extra space configurable
* Install the ACPI table from the bloblist
* Handle GD_FLG_SKIP_RELOC
* handle malloc() errors
Others:
* acpi: select CONFIG_BLOBLIST
* smbios: select CONFIG_BLOBLIST
* xilinx: dfu: Fill directly update_info.dfu_string
* cmd: fwu: Dump custom fields from mdata structure
* board: remove capsule update support in set_dfu_alt_info()
-----BEGIN PGP SIGNATURE-----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=bdEe
-----END PGP SIGNATURE-----
Merge tag 'efi-2025-07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-07-rc1
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/25648
Documentation:
* Update authenticated capsules documentation
UEFI:
* Add support for loading FIT images including initrd
- efi_loader: efi_load_initrd: provide a memory mapped initrd
- efi_loader: binary_run: register an initrd
- bootm: add support for initrd in do_bootm_efi
* efi_selftest: remove un-needed NULL checks
* efi: Fix efiboot for payloads loaded from memory
* Print extra information from the bootmgr
* Move public cert for capsules to .rodata
* Set EFI capsule dfu_alt_info env explicitly
* Make FDT extra space configurable
* Install the ACPI table from the bloblist
* Handle GD_FLG_SKIP_RELOC
* Handle malloc() errors
Others:
* acpi: select CONFIG_BLOBLIST
* smbios: select CONFIG_BLOBLIST
* xilinx: dfu: Fill directly update_info.dfu_string
* cmd: fwu: Dump custom fields from mdata structure
* board: remove capsule update support in set_dfu_alt_info()
To enable more complex sequencing of the bootmenu, autoboot, and
bootretry, handle changes to the bootretry variable between tries. This
makes it possible to turn bootretry off (e.g. to drop to a shell) and
then back on again.
This makes it possible to have a persistent bootmenu (the only way to
navigate U-Boot on devices like smartphones which lack a physical
keyboard) by having bootcmd be defined to launch the bootmenu. This
allows for menu options like enabling USB mass storage gadget to return
back to the boot menu once the gadget is shut down.
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Danila Tikhonov <danila@jiaxyga.com> # google-sunfish
Tested-by: Jens Reidel <adrian@mainlining.org> # xiaomi-davinci
Link: https://lore.kernel.org/r/20250331-qcom-phones-v4-3-f52e57d3b8c6@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Introduce a new config option: RETRY_BOOTCMD. When enabled this causes
hush shell to re-run "bootcmd" when the auto-boot counter times out.
Tested-by: Danila Tikhonov <danila@jiaxyga.com> # google-sunfish
Tested-by: Jens Reidel <adrian@mainlining.org> # xiaomi-davinci
Link: https://lore.kernel.org/r/20250331-qcom-phones-v4-2-f52e57d3b8c6@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Pass a pointer to a memory mapped initrd and its size to
efi_binary_run. The EFI stack will register an EFI_LOAD_FILE2_PROTOCOL
for the next boot stage to access this initrd.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add support to install an initrd when running an EFI binary
with efi_binary_run
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Skip signature verification in case no public key was given in order to
allow using fit_check_sign also to validate uImage.FIT images without
signatures. Guarded by USE_HOSTCC macro the behavior on target is
unchanged.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
- avb_slot_verify_data_free() doesn't check its data parameter
- out_data can be null if avb_slot_verify() fails to allocate memory
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250402144219.1875067-1-bisson.gary@gmail.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Note that this undoes the changes of commit cf6d4535cc ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
A recent change tried to speed up EFI booting by not calling dhcp_run
from eth_bootdev_hunt() every time. PXE so far relied on that dhcp_run
call to get an IP address.
Fix that by adding a dhcp_run call to the pxe bootflow, with autoload
disabled to only get the ip address and nothing else.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Fixes: 1f68057e03 ("net: eth_bootdev_hunt() should not run DHCP")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Simon Glass <sjg@chromium.org> says:
The membuff implementation curently has no tests. It also assumes that
head and tail can never correspond unless the buffer is empty.
This series provides a compile-time flag to support a 'full' flag. It
also adds some tests of the main routines.
The data structure is also renamed to membuf which fits better with
U-Boot.
There may be some cases in the code which could be optimised a little,
but the implementation is functional.
Link: https://lore.kernel.org/r/20250318152059.1464369-1-sjg@chromium.org
The double 'f' is not necessary and is a bit annoying as elsewhere in
U-Boot we use 'buf'. Rename all the functions before it is used more
widely.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the string to take account of UARTs which are connected on I/O
ports, as on x86.
Fix a typo in an error message in the same command, while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
If only a single label is provided in the list, bootdev_next_label()
does not operate correctly and reads beyond the end of the pointer list.
Fix this by adding a new check. Also add a note to convert this array
to an alist
Signed-off-by: Simon Glass <sjg@chromium.org>
Any 'bootable' flag in a DOS partition causes boostd to only scan
bootable partitions for that media. This can mean that extlinux.conf
files on the root disk are missed.
Put this logic behind a flag and update the documentation.
For now, the flag is enabled, to preserve the existing behaviour of
bootstd which is to ignore non-bootable partitions so long as there is
at least one bootable partition on the disk. Future work may provide a
command (or some other mechanism) to control this.
Signed-off-by: Simon Glass <sjg@chromium.org>
The option ONENAND_BOOT is never set, so remove it. The option
SYS_ONENAND_BOOT was never migrated to Kconfig and any platforms which
supported that have long been removed from the code, so remove the
reference there as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
The EFI HTTP boot puts the ISO installer image at some location in
memory. Information about this image has to be passed on to the OS
kernel, which is done by adding a persistent memory(pmem) node to the
devicetree(DT) that is passed to the OS. The OS kernel then gets
information about the presence of this ISO image and proceeds with the
installation.
In U-Boot, this ISO image gets mounted as a memory mapped blkmap
device slice, with the 'preserve' attribute. Add a helper function
which iterates through all such slices, and invokes a callback. The
callback adds the pmem node to the DT and removes the corresponding
memory region from the EFI memory map. Invoke this helper function as
part of the DT fixup which happens before booting the OS.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
One of the problems an OS may face, when running in EFI, is that
a mounted ISO, after calling ExitBootServices goes away, if that ISO
is resident in RAM memory as a ramdisk.
ACPI has NFIT and NVDIMM support to provide ramdisks to the OS, but we
don't have anything in place for DTs. Linux and device trees have support
for persistent memory devices. So add a function that can inject a pmem
node in a DT, so we can pass information on the ramdisk the OS.
Signed-off-by: Masahisa Kojima <kojima.masahisa@socionext.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass <sjg@chromium.org> says:
This series includes some patches related to allowing read_all() to be
used with the extlinux / PXE bootmeths.
These patches were split out from the stb4 series, since it will need to
have additional patches for LWIP, to avoid breaking PXE booting when
LWIP is used.
Link: https://lore.kernel.org/r/20250306002533.2380866-1-sjg@chromium.org
Adjust the remaining call in this function to use the bootm API. This
will allow PXE to work without the command line.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tidy up this code a little to avoid two calls to env_get() for both
fdt_addr and fdtcontroladdr
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de>
Rather than building a command line for each operation, use the
functions provided by the bootm API.
Make sure that the bootm functions are available if pxe_utils is used.
Since SYS_BOOTM_LEN is not present for the tools-only build, adjust the
code to handle that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
A compressed booti image relies on the compression-format's header at
the start to indicate which compression algorithm is used.
We don't support this elsewhere in U-Boot, so assume that a compressed
file is always a booti file. Once it is compressed, a check is made to
make sure that it actually is.
Simplify the implementation by adding a new function which returns the
booti image-type if compression is detected.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the booti format is handled separately, in its own command.
Provide a way to boot uncompressed booti images within the bootm code,
so that eventually we can boot these images without CONFIG_CMDLINE
Update bootm_init() to attach the images for all formats which use them.
Add some debugging while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Arm invented a new format for arm64 and something similar is also used
with RISC-V. Add this to the list of supported formats and provide a way
for the format to be detected on both architectures.
Update the genimg_get_format() function to support this.
Fix up switch() statements which don't currently mention this format.
Booti does not support a ramdisk, so this can be ignored.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use an enum so it is clearer that these options are related. Update
genimg_get_format(), tidy up the function comment and move it to the
header file, since it is exported.
Signed-off-by: Simon Glass <sjg@chromium.org>
This code cannot be compiled by boards which don't have this option. Add
an accessor in the header file to avoid another #ifdef
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Since this function only adjusts one element of the bootm command, pass
just that. This will make it easier to refactor things to remove the
bootm command.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
This function is quite long. Split out the FDT processing into its own
function.
Add a function comment for the new label_process_fdt() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
This function is far too long. Split out the part which builds and runs
the bootm/i/z commands into its own function.
Add a function comment for the new label_run_boot() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Add support for starting TFA from U-Boot running in EL3 as part of
fitImage boot, so the user can start U-Boot in the highest privilege
level on the platform, bundle TFA, Linux, DT into a single fitImage
and boot such a bundle as a whole.
There are two main benefits of this approach. First is the ability
to run U-Boot in EL3, where it has unrestricted access to the entire
system and can act as a useful debug tool, as it was always intended
to be used. Second is the ability to easily and safely update of any
component in the fitImage, be it TFA, Linux or DT.
The boot process is similar to regular Linux with DT fitImage boot
process, except the TFA has to be bundled into the fitImage. For the
bundling instructions, see below. The TFA is started as a 'loadables'
with custom U_BOOT_FIT_LOADABLE_HANDLER and armv8_switch_to_el2_prep()
handling implemented in board code, and performing the handoff and
boot in case the TFA was loaded.
The loadables handler is optional and meant to set up any sort of
handoff structures used by the TFA BL31 or perform any other setup
that is needed by the blob. The custom armv8_switch_to_el2_prep()
has to implement the jump to TFA BL31 with return to U-Boot just
before booting the Linux kernel.
Example fitImage image and configuration section:
/dts-v1/;
/ {
description = "Linux kernel with FDT blob and TFA BL31";
images {
kernel-1 { ... };
fdt-1 { ... };
atf-1 { /* This is the TFA BL31 image */
description = "TFA BL31";
data = /incbin/("../build/plat/release/bl31.bin");
type = "tfa-bl31";
arch = "arm64";
os = "arm-trusted-firmware";
compression = "none";
load = <0x46400000>;
entry = <0x46400000>;
};
};
configurations {
default = "conf-1";
conf-1 {
description = "Boot Linux";
kernel = "kernel-1";
fdt = "fdt-1";
loadables = "atf-1"; /* This is the TFA BL31 loadable */
};
};
};
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
607b07554e removed the check on the return status of the
android_image_get_dtb_img_addr call from android_image_get_dtb_by_index,
which results in null pointer accesses shortly after when trying to
check the header of a nonexistent DTB.
Fixes: 607b07554e ("android: boot: move to andr_image_data structure")
Signed-off-by: Sam Day <me@samcday.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20250123-android-handle-no-dtb-v1-1-1cb7373247da@samcday.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
A FIT image which is NOT using -E when created by mkimage - that is with
image data within the FIT - will fail to apply FDTO if the base FDT
image node does not specify a load property (which points to an address
in DRAM). This is because we check that the FDT address we want to apply
overlay to (i.e. modify and likely increase in size) is not inside the
FIT and give up otherwise. This is assumed necessary because we may then
overwrite other data when applying in-place.
However, we can do better than giving up: relocating the FDT in another
place in DRAM where it's safe to increase its size and apply FDTOs.
While at it, do not discriminate anymore on whether the data is within
the FIT data address space - that is FIT images created with mkimage -E
- as that still may be susceptible to unintended data overwrites as
mkimage -E simply concatenates all blobs after the FIT. If the FDT blob
isn't the last, it'll result in overwriting later blobs when resizing.
The side effect is that the load property in the FIT is only
temporarily used to load the FDT but then relocated right before we
start applying overlays.
Suggested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
So far only VBE-simple is implemented in U-Boot. This supports a single
image which can be updated in situ.
It is often necessary to support two images (A and B) so that the board
is not bricked if the update is interrupted or is bad.
In some cases, a non-updatable recovery image is desirable, so that the
board can be returned to a known-good state in the event of a serious
failure.
Introduce ABrec which provides these features. It supports three
independent images and the logic to select the desired one on boot.
While we are here, fix a debug message to indicate the function it
called. Provide a maintainers entry for VBE.
Note that fwupdated only supports VBE-simple so far, but supports for
ABrec will appear in time.
Signed-off-by: Simon Glass <sjg@chromium.org>
When VBE operates within VPL it does not want the FDT to be changed.
Provide a way to disable this feature.
Move the FIT_IMAGE_TINY condition out of spl_fit_record_loadable() so
that both conditions are together. This makes the code easier to
understand.
Replace the existing fit_loaded member, which is no-longer used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Join the comment block for the fit_image_load() call back to where it
should be. Also fix a debug statement.
Signed-off-by: Simon Glass <sjg@chromium.org>
With SPL we want to specify the phase of the image to be loaded. Add
support for this.
This is the implementation of a FIT feature added to the spec a few
years ago and entails a small code-size increase, about 70 bytes on
Thumb2.
Signed-off-by: Simon Glass <sjg@chromium.org>
Link: https://docs.u-boot.org/en/latest/usage/fit/index.html
Rather than setting up the global variables and then making the call,
pass them into function directly. This cleans up the code and makes it
all a bit easier to understand.
Signed-off-by: Simon Glass <sjg@chromium.org>
When the bootloader is UNLOCKED, it should be possible to boot Android
even if AVB reports verification errors [1].
This allows developers to flash modified partitions on
userdebug/engineering builds.
Developers can do so on unlocked devices with:
$ fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
In such case, bootmeth_android refuses to boot.
Allow the boot to continue when the device is UNLOCKED and AVB reports
verification errors.
[1] https://source.android.com/docs/security/features/verifiedboot/boot-flow#unlocked-devices
Fixes: 125d9f3306 ("bootstd: Add a bootmeth for Android")
Reviewed-by: Julien Masson <jmasson@baylibre.com>
Link: https://lore.kernel.org/r/20250108-avb-disable-verif-v2-2-ba7d3b0d5b6a@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
