Line 171 in README is describing that before relocation no code
should use global variable because global variables are placed
to BSS section which is initialized to 0 after relocation.
In the case of ZynqMP, where DTB reselection is enabled, the EEPROM
is read again after relocation. This prevents the issue from being
observed. However, in Versal Gen 2, where DTB reselection is also
enabled, the EEPROM is not read after relocation because it is not
yet wired in board_init(). This leads to a situation where the code
accesses an incorrect memory location, because none is really
checking the board_info is valid or not. To fix, move the board_info
into the data section and also check whether it is valid or not.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20250409162553.588285-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
U-Boot configures the USB config object which enables power for
the IP, without this the linux usb driver won't work.
So add "usb start" as part of preboot command.
Fixes: dd4a822016 ("arm64: zynqmp: Introduce kria SOM defconfig")
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/180c9776b03d57d8218d161924363906ef354394.1744272843.git.michal.simek@amd.com
The source code for the versal loadpdi command and the
CONFIG_CMD_VERSAL configuration has been removed. It now utilizes
the fpga load <dev> <address> <length> command to load secure &
non-secure pdi images.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Link: https://lore.kernel.org/r/20250327105200.1262615-4-prasad.kummari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add support for loading the secure & non-secure pdi images and
PL bitstream on the Versal NET platform. The FPGA driver is enabled
to load the bitstream in PDI format on the AMD Versal NET device.
PDI is the new programmable device image format for Versal NET,
and the bitstream for the Versal NET platform is generated exclusively
in this format.
The source code for the versalnet loadpdi command and the
CONFIG_CMD_VERSAL_NET configuration has been removed. It now utilizes
the fpga load <dev> <address> <length> command to load secure &
non-secure pdi images.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Link: https://lore.kernel.org/r/20250327105200.1262615-2-prasad.kummari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The set_dfu_alt_info() function calls the ALLOC_CACHE_ALIGN_BUFFER()
macro to declare a `buf' variable pointer into an array allocated on the
stack. It then calls the memset() function to clear the useable portion
of the array using the idiomatic expression `sizeof(buf)'.
While this would indeed work fine for an array, in the present case we
end up clearing only the size of a pointer.
Fix this by specifying the explicit size `DFU_ALT_BUF_LEN' instead.
Fixes: b86f43de0b ("xilinx: zynqmp: Add support for runtime dfu_alt_info setup")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20250407170529.893307-6-vincent.stehle@arm.com
The set_dfu_alt_info() function calls the ALLOC_CACHE_ALIGN_BUFFER()
macro to declare a `buf' variable pointer into an array allocated on the
stack. It then calls the memset() function to clear the useable portion
of the array using the idiomatic expression `sizeof(buf)'.
While this would indeed work fine for an array, in the present case we
end up clearing only the size of a pointer.
Fix this by specifying the explicit size `DFU_ALT_BUF_LEN' instead.
Fixes: c67fecd212 ("ARM: zynq: Enable capsule update for qspi and mmc")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20250407170529.893307-5-vincent.stehle@arm.com
The set_dfu_alt_info() function calls the ALLOC_CACHE_ALIGN_BUFFER()
macro to declare a `buf' variable pointer into an array allocated on the
stack. It then calls the memset() function to clear the useable portion
of the array using the idiomatic expression `sizeof(buf)'.
While this would indeed work fine for an array, in the present case we
end up clearing only the size of a pointer.
Fix this by specifying the explicit size `DFU_ALT_BUF_LEN' instead.
Fixes: 064c8978b4 ("arm64: versal: Enable capsule update (SD)")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20250407170529.893307-4-vincent.stehle@arm.com
Added extended support for retrieving the PMC muti boot mode
register via the firmware interface, which is preferred when
U-Boot runs in EL2 and cannot directly access PMC registers
via raw reads. Ideally, all secure registers should be accessed
via xilinx_pm_request(). Introduced the secure
zynqmp_pm_get_pmc_multi_boot_reg() call, which uses
xilinx_pm_request() to read the PMC multi boot mode register.
BootROM increments the MultiBoot register (PMC_MULTI_BOOT) read
address offset by 32 KB and retries. For SD and eMMC boot modes,
it can search up to 8191 FAT files for the identification string.
A 13-bit mask (0x1FFF) is applied to PMC_MULTI_BOOT_MASK to obtain
the correct values in BootROM.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Link: https://lore.kernel.org/r/20250305134845.3182193-1-prasad.kummari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Added extended support for retrieving the boot mode register
via the firmware interface, which is preferred when U-Boot
runs in EL2 and cannot directly access CRP registers via raw
reads. Ideally, all secure registers should be accessed via
xilinx_pm_request(). Introduced the secure zynqmp_pm_get_bootmode_reg()
call, which uses xilinx_pm_request() to read the boot mode register.
When CONFIG_ZYNQMP_FIRMWARE is enabled, the secure
zynqmp_pm_get_bootmode_reg() call is used; otherwise,
direct raw reads are performed in the case of mini U-Boot.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Link: https://lore.kernel.org/r/20250219115301.3661036-1-prasad.kummari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Tom Rini <trini@konsulko.com> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/20250401225851.1125678-1-trini@konsulko.com
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that capsule update sets the dfu_alt_info environment variable
explicitly, there is no need to support it in the set_dfu_alt_info()
function. Decouple SET_DFU_ALT_INFO from EFI_CAPSULE_FIRMWARE_FIT and
EFI_CAPSULE_FIRMWARE_RAW. For many boards, this was the only use of
set_dfu_alt_info() so remove the function entirely.
Fixes: a9e6f01a94 ("efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for board/libre-computer/*
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de> # for
Directly fill update_info.dfu_string to prepare platforms to switch
from using dfu_alt_info variable to dfu_string which contains description
for capsule update when switch is done.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In U-Boot, most of mmc releated commands uses decimal value in arguments, like
"mmc dev ${bootseq}" or "bootargs=root=/dev/mmcblk${bootseq}p2". In order to
improve compatibilities, export "bootseq" number to environment variable in
decimal format instead of hex.
Signed-off-by: Benjamin Szőke <egyszeregy@freemail.hu>
Link: https://lore.kernel.org/r/20250204205617.1238-1-egyszeregy@freemail.hu
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add usb_pgood_delay to ensure proper detection of USB devices.
Increase the USB power good delay on the SOM boards, as this
is required for certain USB sticks otherwise, they may not
be detected.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Link: https://lore.kernel.org/r/20250107122915.1378284-1-prasad.kummari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
This releases the DP configuration from reset early on during the boot process
for K26 SOM. It will also avoid the boot hang situation should any attempt be
made to configure the DP registers while it is still in reset.
Fixes the same issue as described by the commit 8b81010a2f ("video:
zynqmp: Add support for reset").
Signed-off-by: Neal Frager <neal.frager@amd.com>
Link: https://lore.kernel.org/r/20241218130129.687650-1-neal.frager@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
USB hub initialization is done by driver introduced by commit 09f557e106
("usb: onboard-hub: Add i2c initialization for usb5744 hub") that's why
there is no need to do initialization via variables.
Reported-by: Love Kumar <love.kumar@amd.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/96e9c80aeeed4e9664858bf236476997d17a9914.1734522042.git.michal.simek@amd.com
The main reason for this change is that upstream QEMU has no multiboot
register implemented that's why access to it fails which ends up in CI
failure for our target.
That's why in JTAG bootmode returns 0 which is correct behaviour because
multiboot register is not used in this mode and value should be ignored and
as a side effect it is also fixing CI/Qemu issue.
Also move versal_get_bootmode() to avoid function declaration.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/484b9cafc45e72308a1a29a3ab772020f96784cc.1736155238.git.michal.simek@amd.com
This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.
No yaks were harmed in this change, but there is a very small code-size
reduction.
For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
[trini: Update total_compute]
Signed-off-by: Tom Rini <trini@konsulko.com>
There is no common symbol which mini configurations are using and recent
get_mem_top() changes adding 1.3kB without having a way to remove it.
That's why introduce new symbol which can be used for removing features
which are not requested by these configurations.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/aa27b72e17057fa8cbdd92a2bbb863a31c8c1226.1731681053.git.michal.simek@amd.com
Use the get_mem_top function to compute the value of ram_top. This was
earlier done through LMB API's, which are no longer available till
after relocation. Use get_mem_top() instead to compute the ram_top
value.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20241025172724.195093-3-sughosh.ganu@linaro.org
Signed-off-by: Michal Simek <michal.simek@amd.com>
DTB should be also placed to DDR. It should be the part of commit
9d688e6da5 ("riscv: mbv: Align DT with QEMU").
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Align U-Boot with QEMU amd-microblaze-v-virt platform to be able to wire
it with CI.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Padmarao Begari <padmarao.begari@amd.com>
As per bootmenu support added default boot options to CC on AMD CCs and
default to SOM on others.
However, if no secondary boot device is enabled in the design,it should
be the default boot option for SOM when combined with AMD CCs because it
only contains SOM peripherals.
To address this issue, The conditional check for the bootmenu_default
variable was removed, and it has always been set to SOM as the default
boot option.
In this way, users can choose preferred boot options from the bootmenu
based on the boot devices configured in the design for AMD CCs.
Fixes: 61bf0fa866 ("xilinx: zynqmp: Add bootmenu support")
Signed-off-by: John Vicky Vykuntapu <johnvicky.vykuntapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/0e30b44ce3b478fdec21edad8d896f4d438ce331.1727867715.git.michal.simek@amd.com
Fix the issue introduced by commit 067e029480
("board: xilinx: Remove conditional check for Microblaze").
The scriptaddr should be physical location not really offset
from start of DDR. When U-Boot is not found boot.scr script
address in device tree, then it is assigned based on script
address and ram base address for Microblaze and i.e exceeding
DDR memory. To fix this, the script address is assigned
initially with offset instead of address. Later it is added
with ram base address and gets the physical address.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20241001082537.830286-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add what it takes to enable NETDEVICES with NET_LWIP and enable DHCP as
well as the dhcp command. CMD_TFTPBOOT is selected by BOOTMETH_EFI due
to this code having an implicit dependency on do_tftpb().
Note that PXE is likely non-fonctional with NET_LWIP (or at least not
100% functional) because DHCP option 209 is not supported by the lwIP
library. Therefore, BOOTP_PXE_DHCP_OPTION cannot be enabled.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Raymond Mao <raymond.mao@linaro.org> says:
Integrate MbedTLS v3.6 LTS (currently v3.6.0) with U-Boot.
Motivations:
------------
1. MbedTLS is well maintained with LTS versions.
2. LWIP is integrated with MbedTLS and easily to enable HTTPS.
3. MbedTLS recently switched license back to GPLv2.
Prerequisite:
-------------
This patch series requires mbedtls git repo to be added as a
subtree to the main U-Boot repo via:
$ git subtree add --prefix lib/mbedtls/external/mbedtls \
https://github.com/Mbed-TLS/mbedtls.git \
v3.6.0 --squash
Moreover, due to the Windows-style files from mbedtls git repo,
we need to convert the CRLF endings to LF and do a commit manually:
$ git add --renormalize .
$ git commit
New Kconfig options:
--------------------
`MBEDTLS_LIB` is for MbedTLS general switch.
`MBEDTLS_LIB_CRYPTO` is for replacing original digest and crypto libs with
MbedTLS.
`MBEDTLS_LIB_CRYPTO_ALT` is for using original U-Boot crypto libs as
MbedTLS crypto alternatives.
`MBEDTLS_LIB_X509` is for replacing original X509, PKCS7, MSCode, ASN1,
and Pubkey parser with MbedTLS.
By default `MBEDTLS_LIB_CRYPTO_ALT` and `MBEDTLS_LIB_X509` are selected
when `MBEDTLS_LIB` is enabled.
`LEGACY_CRYPTO` is introduced as a main switch for legacy crypto library.
`LEGACY_CRYPTO_BASIC` is for the basic crypto functionalities and
`LEGACY_CRYPTO_CERT` is for the certificate related functionalities.
For each of the algorithm, a pair of `<alg>_LEGACY` and `<alg>_MBEDTLS`
Kconfig options are introduced. Meanwhile, `SPL_` Kconfig options are
introduced.
In this patch set, MBEDTLS_LIB, MBEDTLS_LIB_CRYPTO and MBEDTLS_LIB_X509
are by default enabled in qemu_arm64_defconfig and sandbox_defconfig
for testing purpose.
Patches for external MbedTLS project:
-------------------------------------
Since U-Boot uses Microsoft Authentication Code to verify PE/COFFs
executables which is not supported by MbedTLS at the moment,
addtional patches for MbedTLS are created to adapt with the EFI loader:
1. Decoding of Microsoft Authentication Code.
2. Decoding of PKCS#9 Authenticate Attributes.
3. Extending MbedTLS PKCS#7 lib to support multiple signer's certificates.
4. MbedTLS native test suites for PKCS#7 signer's info.
All above 4 patches (tagged with `mbedtls/external`) are submitted to
MbedTLS project and being reviewed, eventually they should be part of
MbedTLS LTS release.
But before that, please merge them into U-Boot, otherwise the building
will be broken when MBEDTLS_LIB_X509 is enabled.
See below PR link for the reference:
https://github.com/Mbed-TLS/mbedtls/pull/9001
Miscellaneous:
--------------
Optimized MbedTLS library size by tailoring the config file
and disabling all unnecessary features for EFI loader.
From v2, original libs (rsa, asn1_decoder, rsa_helper, md5, sha1, sha256,
sha512) are completely replaced when MbedTLS is enabled.
From v3, the size-growth is slightly reduced by refactoring Hash functions.
From v6, smaller implementations for SHA256 and SHA512 are enabled and
target size reduce significantly.
Target(QEMU arm64) size-growth when enabling MbedTLS:
v1: 6.03%
v2: 4.66%
v3 - v5: 4.55%
v6: 2.90%
Tests done:
-----------
EFI Secure Boot test (EFI variables loading and verifying, EFI signed image
verifying and booting) via U-Boot console.
EFI Secure Boot and Capsule sandbox test passed.
Known issues:
-------------
None.
Link: https://lore.kernel.org/u-boot/20241003215112.3103601-1-raymond.mao@linaro.org/
We don't need an API specially for non-watchdog since md5_wd supports
it by disabling CONFIG_HW_WATCHDOG and CONFIG_WATCHDOG.
Set 0x10000 as default chunk size for MD5.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Popup the bootmenu for 5 sec with default boot options to CC on AMD CCs and
default to SOM on others.
Users can anytime disable the bootmenu by setting the variable
enable_bootmenu=0 in zynqmp_kria.env or setup it up at run time and save
variables to NV memory.
The patch is also fixing issue created by commit 4c73630686 ("cmd:
setexpr: fix no matching string in gsub return empty value") which has
changed return value from setexpr command (Before this commit when
matching string wasn't found command return 1 that's why was possible to
use with if).
Signed-off-by: John Vicky Vykuntapu <johnvicky.vykuntapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6193d95a9c0f3ae319a900b46d6212f7ab16aba4.1726041851.git.michal.simek@amd.com
U-Boot is not picking boot.scr script address from device tree
rather it's using default address for Microblaze platform,
and it's picking for other platforms. Remove conditional check
for Microblaze platform, so that u-boot pick up boot.scr script
address for all platforms from device tree.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20240913093231.2343528-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Set NIDEN, enabling non-invasive debug for the CCI-400 PMU. Otherwise,
the PMU is effectively disabled.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240905171833.325548-3-sean.anderson@linux.dev
Signed-off-by: Michal Simek <michal.simek@amd.com>
Included the SPI header to resolve the no previous prototypes
for function. Removed unused mode variable.
sparse warnings
warning: no previous prototype for 'spi_get_env_dev'
[-Wmissing-prototypes]
warning: variable 'mode' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Link: https://lore.kernel.org/r/20240905115758.999936-1-prasad.kummari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Move this header to include/u-boot/ so that it can be used by external
tools.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The LMB memory is typically not needed very early in the platform's
boot. Do not add memory to the LMB map before relocation. Reservation
of common areas and adding of memory is done after relocation.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
With the introduction of separate config symbols for the SPL phase of
U-Boot, the condition checks need to be tweaked so that platforms that
enable the LMB module in SPL are also able to call the LMB API's. Use
the appropriate condition checks to achieve this.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
