For modern architectures and security requirements, it's better to
map the memory properly.
This pull request adds basics support for mapping the U-Boot binary with
proper (RO, RW, RW^X) memory permissions on aarch64 right after we
relocate U-Boot in the top of DRAM.
It's worrth noting that the linker script annotations are only added for
the aarch64 architecture. We can, in the future, try to unify the linker --
at least for the architectures that have enough in common and expand this
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEgWII69YpahbL5iK5gS8AYozs+qIFAmfUFksACgkQgS8AYozs
+qLa0hAAg/wmSJhOfzYw+7fMsQebtWMcY7dEa88u3I5QyUQfYFujXuVj+Y5PbguR
o6DsO26HVRwzo/+YSdVih+GTS1C0BVGVdNE5HZmM1ju4lzgnsZHLuiNx7859Uq0H
8PWpGb7okB9m22YBOqbXaj5o7QFryU6AU5gEBJYCV6aRxXv5Ha4VoQsdrOkj9eVN
8QHm5m7EKApYPmjDRul1TNlFNUjhmDNkcEij4pmpNAOl92zbyn4r62c6/u3jYov7
P9eFt9CLnkCm8k86e+ciXUvykSNxhNGSvCUMLwDJA3oqizBJPfvYF5yyHW0LeCi+
pXYtxQ9igGfh+AYeEn4vxYcLqIf1Iqr78QKg/De3Vok6e7+UJBOspxCUS/gxjvAi
Yn1/n31KzaP9hAJKcZ+NTAKOhgyENnDIZ/qSTMhEDwXbiWmn36hGJlnZZE610TbR
zxgeYChCbcI7eXq/wCJDPNVP51xMh/MZUGup3rREp/0YG5Cl1dMJ1WjcX1O0W1u3
WKv8MZ6XP5fKTR8dUr+H4V3tcJ6VGuMQ1oHH9xZ/dar4RMboFPMZeFFIzhBIOQT4
rcQfjmORrQ/ES6Inv+7QgjpZScJ8E+8yFEW1o9y+7tOf+CL8Jq+l0OW9NdNcRRox
MxrgAIRkdAiKQj2qvLqV2RGhc/OSa/U75cLbVEcTjcJ+ya/0wfg=
=AKxY
-----END PGP SIGNATURE-----
Merge tag 'mmu-next-14032025' of https://source.denx.de/u-boot/custodians/u-boot-tpm into next
Up to now we configure the entire memory space for U-Boot as RWX.
For modern architectures and security requirements, it's better to
map the memory properly.
This pull request adds basics support for mapping the U-Boot binary with
proper (RO, RW, RW^X) memory permissions on aarch64 right after we
relocate U-Boot in the top of DRAM.
It's worrth noting that the linker script annotations are only added for
the aarch64 architecture. We can, in the future, try to unify the linker --
at least for the architectures that have enough in common and expand this
For armv8 we are adding proper page permissions for the relocated U-Boot
binary. Add a weak function that can be used across architectures to change
the page permissions
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on AML-S905X-CC
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The flag for enabling the ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE quirk can be
handled easily enough in Kconfig. This lets us remove a function but not
obviously correct usage of the IS_ENABLED() macro.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
To increase readability, use the defined constant instead of specifying
SPCR[TBEN] as a number.
Reviewed-by: Sinan Akman <sinan@writeme.com>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Globals defined in headers can result in multiple-definition errors
while linking, if they are visible beyond the current translation unit.
This hasn't been a problem for initreg.h so far, but would become a
problem in the next patch, where I use a constant from initreg.h in a
second C file.
Reviewed-by: Sinan Akman <sinan@writeme.com>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
PowerPC general-purpose registers are historically specified as plain
numbers (0-31), which makes them hard to distinguish from immediates.
For this reason, include/ppc_asm.tmpl defines aliases named r0-r31.
This can still lead to uncaught mistakes if a register is used in place
of a number.
Instead of (e.g.) 5 use %r5, which will result in an assembler warning
if used as a number. Turn these warnings into errors by passing
`--fatal-warnings` to the assembler.
I verified with gazerbeam_defconfig (MPC83xx) and qemu-ppce500_defconfig
(MPC85xx) that this patch results in the same machine code.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Instructions such as dcbi are in the X-form; they have RA and RB fields
and the effective address (EA) is computed as (RA|0)+(RB). In words,
this means that if RA is zero, the left-hand side of the addition is
zero, otherwise the corresponding GPR is used. r0 can never be used on
the left-hand side of a X-form instruction.
For D-form instructions such as addis, the Power ISA illustrates this in
the instruction pseudo-code:
if RA = 0 then RT <- EXTS(SI || 0x0000)
else RT <- (RA) + EXIS(SI || 0x0000)
In all of these cases, RA=0 indicates the value zero, not register r0.
I verified with gazerbeam_defconfig (MPC83xx) and qemu-ppce500_defconfig
(MPC85xx) that this patch results in the same machine code.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
lmb_reserve() is just calling lmb_reserve_flags() with LMB_NONE.
There's not much we gain from this abstraction.
So let's remove the latter, add the flags argument to lmb_reserve()
and make the code a bit easier to follow.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The dtbs: target is almost identical in all architecture Makefiles.
All architecture Makefiles include scripts/Makefile.dts . Deduplicate
the dtbs: target into scripts/Makefile.dts . No functional change.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> #qcom, OF_UPSTREAM
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
All of the current definitions of arch_lmb_reserve() are doing the
same thing -- reserve the region of memory occupied by U-Boot,
starting from the current stack address to the ram_top. Introduce a
function lmb_reserve_uboot_region() which does this, and do away with
the arch_lmb_reserve() function.
Instead of using the current value of stack pointer for starting the
reserved region, have a fixed value, considering the stack size config
value.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
All the current function definitions of arch_lmb_reserve() are doing
the same thing -- reserve the U-Boot memory region. The powerpc(ppc)
architecture, in addition, is making some LMB reservations for the
bootm related image loading. Move these ppc specific reservations to
the arch_misc_init() function. This allows to move the U-Boot memory
region reservation to a different function, and remove
arch_lmb_reserve() in a subsequent commit.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
Only m68k and powerpc use this field, so move it to the arch-specific
info, to reduce the size for other archs.
Signed-off-by: Simon Glass <sjg@chromium.org>
We don't set many options in the board Kconfig entry file but instead
use defconfigs, select in some cases on the target itself, or update the
"default" options of the main entries when needed. In this case we can
remove most of the board Kconfig entries and just add them to the
defconfig like other platforms.
Signed-off-by: Tom Rini <trini@konsulko.com>
Marek Mojík <marek.mojik@nic.cz> says:
Hello all,
this is a continuation of previous work by Pali to add support for the
Turris 1.x board. As the patches were based on u-boot v2022.04, a
nontrivial rebasing was needed.
Some notes:
- Some options that are in SD defconfig are disabled in NOR defconfig
because over the years u-boot grew and the old NOR defconfig will not
fit into NOR memory.
- SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We
were not able to fix this yet)
Add support for CZ.NIC Turris 1.x routers.
CZ.NIC Turris 1.0 (RTRS01) and 1.1 (RTRS02) are open source routers, they
have dual-core PowerPC Freescale P2020 CPU and are based on reference
Freescale P2020RDB-PC-A board design.
Hardware design is fully open source, all firmware and hardware design
files are available at Turris project website:
https://docs.turris.cz/hw/turris-1x/turris-1x/https://project.turris.cz/en/hardware.html
The P2020 BootROM can load U-Boot either from NOR flash or from SD card.
We add the new defconfigs, turris_1x_nor_defconfig, which configures
U-Boot for building the NOR image, and turris_1x_sdcard_defconfig, which
configures U-Boot for building an image suitable for SD card.
The defconfig for NOR image is stripped-down a - many config options
enabled in SD defconfig are disabled for NOR defconfig. This is because
U-Boot grew non-trivially in the last two years and it would not fit
into the space allocated for U-Boot in the NOR memory. In the future we
may try to use LTO to reduce the size of the code and enable more
options.
The design of CZ.NIC Turris 1.x routers is based on Freescale P2020RDB-PC-A
board, so some code from boards/freescale/p1_p2_rdb_pc is used and linked
into Turris 1.x board code.
Turris 1.x code in this patch uses modern distroboot and can boot Linux
kernel from various locations, including NAND, SD card, USB flash disks,
NVMe disks or SATA disks (connected to extra SATA/SCSI PCIe controllers).
Via distroboot is implemented also rescue NOR boot for factory recovery,
triggered by reset button, like on other existing Turris routers.
SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We were
not able to fix this yet)
[ Because various CONFIG_ macros were migrated to Kconfig since the last
time this worked on upstream U-Boot (in 2022), a non-trivial rebasing
was needed and some issues were solved. ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Use the CONFIG_IS_ENABLED() macro when checking for DM_SERIAL so that
CFG_SYS_NS16550_CLK is not defined as get_serial_clock() in SPL if SPL
does not have DM_SERIAL enabled.
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Use CONFIG_VAL() for SYS_MONITOR_BASE in start.S so that correct value
is used for SPL.
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
The find_law() function searches for LAW just by physical address. This
is unsuitable for cases with overlapping LAWs. Extend it to
find_law_by_addr_id(), which searches for LAW by physical address and
target id.
Add a static inline definition of the original find_law() into fsl_law.h
header.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Implement a weak default version of flush_dcache_all which is based on
the ARM default, which is to flush the entire range via
flush_dcache_range(...).
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Nothing in-tree calls watchdog_reset() anymore (that stopped two years
ago with the removal of the WATCHDOG_RESET macro). So that function is
dead code.
That was the only caller of reset_85xx_watchdog(), so that
can obviously also be removed.
Finally, init_85xx_watchdog() is/was also not called from anywhere, so
that can go away as well, which nicely also removes a bit of
arch-specific code from the generic watchdog.h header.
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
There is no longer any code in tree that calls a watchdog_reset()
function. The macro WATCHDOG_RESET, which used to emit a call to
watchdog_reset(), got removed two years ago.
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
This follows the example of RISC-V where <asm/global_data.h> includes
<asm/u-boot.h> directly as "gd" includes a reference to bd_info already
and so the first must include the second anyhow. We then remove
<asm/u-boot.h> from all of the places which include references to "gd"
an so have <asm/global_data.h> already.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove <common.h> from all powerpc architecture files and when needed add
missing include files directly. This typically involves using
<asm/u-boot.h> instead due to the difficult nested structure of the
PowerPC includes themselves.
Signed-off-by: Tom Rini <trini@konsulko.com>
Unlike CMPC885 and CMPCPRO boards, the FPGA of MCR3000 board doesn't
load code automatically but needs to be loaded by software through SPI.
Until now it was loaded later by Linux, but we'd like U-boot to have
access to some information that require the FPGA, like board address
in racks.
So, implemented the load of FPGA in U-boot.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
To avoid spamming your email boxes, the code isn't included in
the emailed patch but will be present in the PULL request
SDMA configuration register needs to be set up only once and doesn't
belong to drivers. Also, the value to be used is different on mpc885.
So do the init in cpu_init_f() with 0x40 for mpc885 and 0x1 for others.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
MCR3000 board has some components tied to the SPI bus, like the Texas
Instruments LM74 temperature sensor.
Add support for SPI bus. The SPI chipselects are a bit special in the
way that they are driven by 3 bits in a register of the board's CPLD
where the value writen in those bits exclusively activates one of the
7 possible chipselects and value 0 sets all chipselets to inactive.
So add a special GPIO driver that simulates GPIOs for those chipselect.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
When adding additional SPI peripherals, the reg property needs to
be added, and this leads to the following error:
arch/powerpc/dts/cmpc885.dtb: Warning (reg_format): /immr@ff000000/spi@aa0/temp@1:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
arch/powerpc/dts/cmpc885.dtb: Warning (reg_format): /immr@ff000000/spi@aa0/temp@2:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Fix it by removing cell-index and cell-size which is unused and add
reg property. Also fix node name to be in line with reg value.
Also add missing compatible for eeprom node.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Simon Glass <sjg@chromium.org> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
Allow these functions to be compiled in when CONFIG_BOOTM is enabled,
even if CONFIG_CMD_BOOTM is not.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
Simon Glass <sjg@chromium.org> says:
This series continues refactoring the bootm code to allow it to be used
with CONFIG_COMMAND disabled. The OS-handling code is refactored and
a new bootm_run() function is created to run through the bootm stages.
This completes the work.
A booti_go() function is created also, in case it proves useful, but at
last for now standard boot does not use this.
This is cmdd (part d of CMDLINE refactoring)
It depends on dm/bootstda-working
which depends on dm/cmdc-working
Adjust boot_os_fn to use struct bootm_info instead of the separate
argc, argv and image parameters. Update the handlers accordingly. Few
of the functions make use of the arguments, so this improves code size
slightly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The current do_reset() is called from a command context. Add a function
which can be used from anywhere, as is done on ARM.
This is only needed if CONFIG_SYSRESET is disabled.
Since there are lots of reset functions, this one actually just calls
do_reset(). Future refactoring could correct this.
Signed-off-by: Simon Glass <sjg@chromium.org>
In most cases, the architecture global data currently makes use of
assorted linux types, but does not include <linux/types.h> to provide
them. Add <linux/types.h> instead of relying on indirect inclusion.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
To quote the author:
This series imports generic versions of ioread_rep/iowrite_rep and
reads/writes from Linux. Some cleanup is done to make sure that all
platforms have proper defines for implemented functions and there are no
redefinitions.
Add defines for __raw_{read,write}{b,w,l}() functions to make
make asm-generic/io.h aware of them.
Signed-off-by: Igor Prusov <ivprusov@salutedevices.com>
In order to not rely on common.h providing a number of common includes,
cleanup what we include directly in order to be able to drop common.h
later.
Signed-off-by: Tom Rini <trini@konsulko.com>
