SoCFPGA updates for v2025.10:
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27762
This pull request brings a set of updates across SoCFPGA platforms
covering Agilex5, Agilex7, N5X, and Stratix10. The changes include:
* Agilex5 enhancements:
- USB3.1 enablement and DWC3 host driver support
- System Manager register configuration for USB3
- Watchdog timeout increase and SDMMC clock API integration
- dcache handling improvements in SMC mailbox path
- Enable SPL_SYS_DCACHE_OFF in defconfig
* Clock driver improvements:
- Introduce dt-bindings header for Agilex clocks
- Add enable/disable API and EMAC clock selection fixes
- Replace manual shifts with FIELD_GET usage
* DDR updates:
- IOSSM mailbox compatibility check
- Correct DDR calibration status handling
* Device tree changes:
- Agilex5: disable cache allocation for reads
- Stratix10: add NAND IP node
- Enable driver model watchdog
- Enable USB3.1 node for Agilex5
* Config cleanups:
- Simplify Agilex7 VAB defconfig
- Remove obsolete SYS_BOOTM_LEN from N5X VAB config
- Enable CRC32 support for SoCFPGA
- Increase USB hub debounce timeout
Overall this set improves reliability of DDR and cache flows,
adds missing USB and MMC features for Agilex5, and refines clock
and configuration handling across platforms.
This patch set has been tested on Agilex 5 devkit, and Agilex devkit.
Some legacy USB mass storage devices during connection were
observed to have debounce issues. Hence, increasing the default
USB Hub debounce timeout value to handle this issue for devices
connected to Agilex5 boards.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Required USB DWC3 host driver configurations are enabled
for Agilex5.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Add SPL_SYS_DCACHE_OFF to Agilex5 defconfig to disable data cache for SPL
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Linux kernel will fail to boot due to exceeding timeout trying to
probe I3C device.
Increasing the watchdog timeout 30 seconds will give enough time for
Linux to probe the I3C device and will be able to boot up successfully.
User is expected to fine tune the watchdog timeout for the complete
boot in production.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Remove the current CONFIG_SYS_BOOTM_LEN in N5X VAB defconfig.
Previously, the size was set to 32MB, but due to larger kernel image,
64MB size is required. This 64MB configuration has been set as
default in the Kconfig.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
CRC32 support for SoC64 devices is added.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
To ensure unintentional bugs occurring because of config changes
in master defconfig and its VAB variants, VAB defconfig files now
include the master defconfig and enable config values specific to
VAB functionality only.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Set ethprime to eth0 since FEC interface is considered the primary IF on
phyCORE-i.MX93 SoM based boards. This comes from the fact that the same
bootloader is reused for both carrier boards, that is phyBOARD-Segin and
phyBOARD-Nash which both use different Ethernet PHYs on the EQOS (eth1)
interface and thus eth1 cannot be used as a prime.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Add board-level code and defconfig for the i.MX943 EVK board, supporting
multiple SOM variants: 19x19 LPDDR5, 19x19 LPDDR4 and 15x15 LPDDR4.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Enable OP-TEE config and RNG by default.
Set OP-TEE load address to end of 1GiB RAM for phycore-imx8mp and
phycore-imx8mm as the boards support a 1GiB RAM variant (although not
yet upstreamed for phycore-imx8mm).
The imx8mm-phygate-tauri-l board only supports 2GiB, so the default at
the end of 2GiB is sufficient.
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Allow to flash a board using NXP UUU utility:
- Enable fastboot support on USB.
- Add fastboot partition aliases with names used by UUU. Also add extra
environment variables used by UUU.
- Set 'dofastboot' environment variable based on boot device
configuration, allowing to automatically enter fastboot when booting
from USB.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Enable CONFIG_SPL_SYS_MMCSD_RAW_MODE and set the offset address to
boot from raw addresses instead of a FAT partition.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Anshul Dalal <anshuld@ti.com>
Enable CONFIG_SPL_SYS_MMCSD_RAW_MODE and set the offset address to
boot from raw addresses instead of a FAT partition.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Anshul Dalal <anshuld@ti.com>
Add SYS_CPU automatic inclusion jh7110-u-boot.dtsi to item of config list
DEVICE_TREE_INCLUDES as starfive-visionfive2-u-boot.dtsi and rename file.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Make all Icicle Kit files generic. This supports the addition of
upcoming support for other MPFS boards.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This board supports neither Zaamo nor Zalrsc extension, thus we want to
build it without "a" specified in the ISA string passed to compiler in
case of misused A-extension instructions. With RISCV_ISA_ZAAMO and
RISCV_ISA_ZALRSC Kconfig options introduced, we must explicitly disable
both of them to achieve this.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Imply OF_UPSTREAM in platform Kconfig option and adapt existing boards
to use the correct upstream devicetree paths.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
For TH1520, we want clock and pinctrl drivers to bind before relocation
along with the UART which makes use of them, since upstream devicetree
specifies pinctrl properties for the UART.
This requires a large malloc pool before relocation, let's enlarge it.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable configs flags related to SPI flashes.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add the HBMC and MUX_MMIO configs in the R5 SPL stage for
successful HBMC boot.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
The commit 210702ae6ce8 ("spl: spi: fix falcon mode for spi boot") fixed
the logic of spl_start_uboot() where 0 means OS boot and 1 means u-boot.
Zynq/ZynqMP enable OS_BOOT by default but it was never really be used
that's why disable it to boot via U-Boot phase all the time.
Signed-off-by: Michal Simek <michal.simek@amd.com>
This patch is used to restore support for i.MX95 A0 silicon. To avoid
duplicating defconfig, imx95.config is added and can be shared between
imx95_a0_19x19_evk_defconfig and imx95_19x19_evk_defconfig.
container.cfg and imximage.cfg are used to created .cfgout files that
are be passed to mkimage with -n to build flash.bin. Now they have been
deleted and replaced by adding their content to properties of node which
type is nxp-imx9image under binman node.
Fixes: 9936724aa9b ("imx95_evk: Add i.MX95 B0 support")
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> # imx95-19x19-evk (rA0)
If neither CONFIG_BLOBLIST_FIXED NOR CONFIG_BLOBLIST_ALLOC is set,
currently CONFIG_BLOBLIST_SIZE_RELOC defaults to 0 except if
* CONFIG_ARM=y && CONFIG_EFI_LOADER=y && GENERATE_ACPI_TABLE=y.
A size of zero never makes sense for a bloblist.
When using QFW we need more than 64 KiB to host the ACPI table.
In this case CONFIG_BLOBLIST_ALLOC is used.
Set a reasonable default.
Remove the CONFIG_BLOBLIST_SIZE_RELOC in ARM QEMU defconfigs which are
not compatible with ACPI tables passed from QEMU.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Fixes: 6f9b015c138b ("common: Enable BLOBLIST_TABLES on arm")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Enable CONFIG_DNS for visionfive2 board target. With CONFIG_PROT_DNS_LWIP
enabled and CONFIG_CMD_DNS disabled this restores DNS functionality
displaced by LwIP DNS refactoring during the merge window.
Signed-off-by: E Shattow <e@freeshell.de>
Booting u-boot as payload with coreboot's main branch is currently broken
since commit [1] on x86 as U-boot assumes the active GDT matches what
U-Boot would have installed in start16.S.
Make no assumptions and always load the GDT when building as coreboot
payload to make sure the segment registers are actually matching the GDT.
Fixes #GP seen when booting U-Boot as coreboot payload.
1: https://review.coreboot.org/c/coreboot/+/87255
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://review.coreboot.org/c/coreboot/+/87255
Reviewed-by: Tom Rini <trini@konsulko.com>
Avoid use of hard-coded address in boot command, instead use $loadaddr
which is the default load address. This improves consistency of the
environment on this board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The CONFIG_ENV_VARS_UBOOT_CONFIG extends U-Boot environment with
variables arch/board/board_name/soc/vendor, which can be used to
discern different devices from each other based purely on U-Boot
environment variables.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add new imx8mp-libra-fpsc board.
Bootph tags as well as USB device tree nodes are in u-boot.dtsi for now
and will be removed when upstreamed.
The Libra i.MX 8M Plus FPSC is a single board computer. It uses an i.MX
8M Plus FPSC [1] System on Module which utilizes the FPSC standard [2].
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-8m-plus-fpsc
[2] https://www.phytec.eu/en/produkte/system-on-modules/fpsc
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
For reliable Over The Air update, it is recommended that redundant
environment is used.
Add redundant environment support for the i.MX8M EVK boards.
While at it, increase the environment size and adjust the offset.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Switch to use CONFIG_PHYTEC_EEPROM_BUS instead of the hard coded value
of 2 for the EEPROM I2C bus for both SPL and U-Boot proper. Possible
since commit 88a1816a9b4e ("board: phytec: common: Add PHYTEC_EEPROM_BUS
to Kconfig").
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
By default, lets disable configuration option CONFIG_AHAB_BOOT=y on the
phyCORE-i.MX93 based boards. This option is only used in the secureboot
context which is not provided by default anyway. Lets remove it from the
defconfig to not give false impressions it is supported out of the box
for this board.
On the other hand, in the context of PHYTEC secureboot, this option is
selected by the distro which enables CONFIG_AHAB_BOOT among other secure
boot related options and tweaks needed to properly support it.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Martin Schwan <m.schwan@phytec.de>
Use the upstream devicetrees instead of the local ones.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
[fabio: Remove imx6ul-kontron-bl.dtb and imx6ull-kontron-bl.dtb from Makefile]
For some cases it is beneficial to not store the environment in
persistent memory, but instead use the default environment and
keep it in volatile RAM only. Allow this by enabling
CONFIG_ENV_IS_NOWHERE.
Signed-off-by: Eberhard Stoll <eberhard.stoll@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Enable the watchdog and sysreset drivers and the wdt command.
This also fixes the non-working 'reset' command.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
This aligns the MTD partitions on the SPI NOR with the kernel
devicetree and enables the redundant environment.
Signed-off-by: Oualid Derouiche <oualid.derouiche@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Enable support for fastboot commands via USB.
Signed-off-by: Annette Kobou <annette.kobou@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
We need to set CONFIG_SDP_LOADADDR to a valid RAM address to make
SDP boot work. Use the end of the DDR (256 MiB minimum) as other
boards do.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
