SoCFPGA updates for v2025.10:
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27762
This pull request brings a set of updates across SoCFPGA platforms
covering Agilex5, Agilex7, N5X, and Stratix10. The changes include:
* Agilex5 enhancements:
- USB3.1 enablement and DWC3 host driver support
- System Manager register configuration for USB3
- Watchdog timeout increase and SDMMC clock API integration
- dcache handling improvements in SMC mailbox path
- Enable SPL_SYS_DCACHE_OFF in defconfig
* Clock driver improvements:
- Introduce dt-bindings header for Agilex clocks
- Add enable/disable API and EMAC clock selection fixes
- Replace manual shifts with FIELD_GET usage
* DDR updates:
- IOSSM mailbox compatibility check
- Correct DDR calibration status handling
* Device tree changes:
- Agilex5: disable cache allocation for reads
- Stratix10: add NAND IP node
- Enable driver model watchdog
- Enable USB3.1 node for Agilex5
* Config cleanups:
- Simplify Agilex7 VAB defconfig
- Remove obsolete SYS_BOOTM_LEN from N5X VAB config
- Enable CRC32 support for SoCFPGA
- Increase USB hub debounce timeout
Overall this set improves reliability of DDR and cache flows,
adds missing USB and MMC features for Agilex5, and refines clock
and configuration handling across platforms.
This patch set has been tested on Agilex 5 devkit, and Agilex devkit.
JetHome has allocated a special range for MAC fallback on JetHub D1/D1+
devices.
Signed-off-by: Viacheslav Bocharov <adeep@lexina.in>
Link: https://lore.kernel.org/r/20250903110726.546083-1-adeep@lexina.in
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Select SYSRESET on Vexpress64 to enable system reset to support other
features, such as capsule-on-disk. Select SYSRESET_PSCI if PSCI is
inferred from the firmware (via ARM_PSCI_FW).
Select ARM_SMCCC for Vexpress64 boards which in turn selects
ARM_PSCI_FW.
The sysreset uclass unconditionally implements a reset_cpu() function.
Remove the empty reset_cpu() in vexpress64 board code.
Signed-off-by: Debbie Horsfall <debbie.horsfall@arm.com>
Enable the DM_RNG virtio random number generator driver in order to
consume entropy within U-Boot. This allows U-Boot to inject entropy to the
kernel via UEFI, so the kernel can use that early, for instance for
address layout randomisation, or when the kernel does not provide an
entropy driver itself.
Signed-off-by: Debbie Horsfall <debbie.horsfall@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Add board-level code and defconfig for the i.MX943 EVK board, supporting
multiple SOM variants: 19x19 LPDDR5, 19x19 LPDDR4 and 15x15 LPDDR4.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
System Manager provides the last booted and shutdown reasons of the
logical machines (LM) and system using the SCMI misc protocol (Protocol
ID: 0x84, Message ID: 0xA). This path adds get_reset_reason() to query
and print these reasons in SPL and U-Boot.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
On the RZG2L platform, the advised
TF-A (https://github.com/renesas-rz/rzg_trusted-firmware-a/tree/v2.5/rzg2l)
does not pass any DTB blob to U-Boot.
On the other hand, the RZG2L part of U-Boot expects a DTB to be passed. It
means that if one flashes the latest TF-A as well as the mainline U-Boot,
it will crash trying to dereference the NULL DTB pointer before outputing
anything.
Check if the DTB pointer is NULL before trying to use it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The error message in phytec_get_product_name() was missing a newline,
causing log output to be concatenated with subsequent messages. Add
the newline to improve readability.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
After switching our boards to standard boot, we observed that the
kernel hangs when booting with the "script" boot method over the
network.
The original scriptaddr value was copied from ti_common.env and
remained unused for some time. On phycore-am62x and phycore-am62ax,
however, this address conflicts with the current location where
ATF is loaded (CONFIG_K3_ATF_LOAD_ADDR).
Move scriptaddr to 0x89100000, directly after fdtoverlay_addr_r.
The phycore-am64x is not affected by this issue, but we update it
as well to keep all phycore-am6xx boards consistent.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Per a private email, drop Luka Perkov from MAINTAINERS entries.
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
OP-TEE configs are enabled by default, change the doc to no longer
declare OP-TEE as optional. Also remove CFG_TEE_BENCHMARK as it is no
longer present in optee_os.
Further, phycore-imx8mm and imx8mm-phygate-tauri-l use different build
instructions, so dissolve the common file for building OP-TEE.
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Fix support for i.MX93 voltage modes on phyCORE-i.MX93 SoM boards.
First of all, Kconfig option CONFIG_IMX9_LOW_DRIVE_MODE is gone since
commit c9efcad23741 ("imx93_evk: Remove CONFIG_IMX9_LOW_DRIVE_MODE and
ld defconfig") and was replaced by runtime detection mechanism. Thus
lets use is_voltage_mode() instead of Kconfig to detect CPU type and
select proper voltage mode.
Secondly, 1400MHz ND mode (Nominal Drive) requiring 0.85V BUCK voltage
was not supported with current power_init_board() PMIC settings. Add
check also for this CPU type and set BUCK voltage accordingly.
Last but not least, add printf() printouts about PMIC voltage mode to
the console. This makes it more apparent and verbose about voltage mode
in use. Also our internal tests depend on this printout to catch issues
with i.MX93 CPU types and set PMIC voltage modes.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
According to latest ELE Get FW version API, the FW version word is defined
as below. The patch version only has 4 bits and minor version has 12 bits.
However, the codes use 8 bits for patch version and minor version. Add the
patch to fix the issue.
ELE firmware version
[31] - When set indicates a dirty build.
[30] - Reserved
[29:28] - Hotfix version.
[27] - When set, indicate that ELE FW is authenticated and operational.
[26:25] - Reserved
[24] - When set, indicate that an alternative FW is running.
[23:16] - Indicate the major version. This byte is checked against the
version set in the fuses to determine if the FW execution can be authorized
[15:4] - Indicate the minor version.
[3:0] - Indicate the patch version.
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Allow to flash a board using NXP UUU utility:
- Enable fastboot support on USB.
- Add fastboot partition aliases with names used by UUU. Also add extra
environment variables used by UUU.
- Set 'dofastboot' environment variable based on boot device
configuration, allowing to automatically enter fastboot when booting
from USB.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> says:
In the qemu-sbsa configuration, the GICv3 definition is disabled due to
a typo. After fixing the typo, GICv3 is enabled, however, the GIC register
base address definitions are missing, resulting in a build failure.
This series enables GICv3 and resolves this build error.
Confirming that U-Boot successfully starts up in QEMU SBSA environment
after the fix.
Link: https://lore.kernel.org/r/20250910092327.279749-1-hayashi.kunihiko@socionext.com
The config "GIC_V3" seems to be typo, and currently "GICV3" remains
disabled. Since "GIC_V3_ITS" is enabled in qemu-sbsa, "GICV3" should
also be enabled.
Fixes: 6d722894fd48 ("board: emulation: Add QEMU sbsa support")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Include the use of the process dtbo functionality added in the MPFS
system controller driver.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Make all Icicle Kit files generic. This supports the addition of
upcoming support for other MPFS boards.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
If the u-boot.itb read from SD-card is invalid, fdt_check_header() may be
called with a NULL pointer.
This was observed on an StarFive VisionFive Lite when trying to revover the
board via UART.
Add a missing check in the starfive board code.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
The isprint() checks printability across all 256 characters, some of the
upper 128 characters are printable and produce artifacts on UART. Call
isascii() first to only consider the bottom 7bit ASCII characters as
printable, and then check their printability using isprint(). This fixes
a rare misprint in case the ID page content is uninitialized or corrupted.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
The eip pointer in dh_get_value_from_eeprom_buffer() might be NULL.
The current NULL pointer check happens too late, after the eip was
accessed in variable assignment. Reorder the two, so the NULL pointer
check happens first, and any access second, otherwise the access may
trigger a hang or other undefined behavior.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Fix to prevent hang in clk-stm32-core for STM32MP13
Fix ethernet init for DH STM32MP1
-----BEGIN PGP SIGNATURE-----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=Kg53
-----END PGP SIGNATURE-----
Merge tag 'u-boot-stm32-20250917' of https://source.denx.de/u-boot/custodians/u-boot-stm
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/27648
- Fix net suport for STM32MP2
- Fix to prevent hang in clk-stm32-core for STM32MP13
- Fix ethernet init for DH STM32MP1
Commit 649f4a7d3ca7 ("board: ti: am57xx: Set fdtfile from C code
instead of findfdt script") prepends "ti/omap/" to the actual name
of the fdtfile whereas fit image boot needs exact dtb name. So, remove
"ti/omap" from name_fit_config by substituting it with an empty string.
Fixes: 649f4a7d3ca7 ("board: ti: am57xx: Set fdtfile from C code instead of findfdt script")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
This patch is used to restore support for i.MX95 A0 silicon. To avoid
duplicating defconfig, imx95.config is added and can be shared between
imx95_a0_19x19_evk_defconfig and imx95_19x19_evk_defconfig.
container.cfg and imximage.cfg are used to created .cfgout files that
are be passed to mkimage with -n to build flash.bin. Now they have been
deleted and replaced by adding their content to properties of node which
type is nxp-imx9image under binman node.
Fixes: 9936724aa9b ("imx95_evk: Add i.MX95 B0 support")
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> # imx95-19x19-evk (rA0)
The isprint() checks printability across all 256 characters, some of the
upper 128 characters are printable and produce artifacts on UART. Call
isascii() first to only consider the bottom 7bit ASCII characters as
printable, and then check their printability using isprint(). This fixes
a rare misprint in case the ID page content is uninitialized or corrupted.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
The eip pointer in dh_get_value_from_eeprom_buffer() might be NULL.
The current NULL pointer check happens too late, after the eip was
accessed in variable assignment. Reorder the two, so the NULL pointer
check happens first, and any access second, otherwise the access may
trigger a hang or other undefined behavior.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Per recent discussion [1] product IDs VF7110A or VF7110B from EEPROM are
sufficient to select for VisionFive 2 1.2a or VisionFive 2 1.3b boards.
There are no VisionFive 2 products with mixed-case product IDs in EERPOM
so factor out the unnecessary select case conditional.
1: https://lore.kernel.org/u-boot/ZQ2PR01MB1307D97D2C9566B8EE443812E6062@ZQ2PR01MB1307.CHNPR01.prod.partner.outlook.cn/
Signed-off-by: E Shattow <e@freeshell.de>
Reported-by: Hal Feng <hal.feng@starfivetech.com>
Check the compatible string of ethernet1 node for KS8851 very early on,
before calling uclass_get_device_by_of_path() which might initialize
the device and possibly attempt to configure MAC address into device
which is not KS8851. Doing the compatibility check early prevent this.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add CMD_MEMINFO and CMD_MEMINFO_MAP to list of configs implied by
TI_COMMON_CMD_OPTIONS. This allows users to easily view the memory
configuration and the memory maps at runtime.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Make the fdt_map parameter a pointer to const, since the function only
reads the mapping table. This improves API correctness and allows maps
to live in read-only data.
No functional change intended
Signed-off-by: Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>
Unlike other K3 SoC's, am65 SoC has the capability to detect daughter
cards and automatically generate a list of white-space separated overlays
in name_overlays environment variable.
When applied during boot with get_overlay_mmc, the path to overlays with
default distribution is incorrect where path is currently: boot/dtb and
the overlays exist in boot/dtb/ti.
Fix the path in get_overlay_mmc so that overlays are automatically applied
correctly during boot time.
Signed-off-by: Judith Mendez <jm@ti.com>
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Add new imx8mp-libra-fpsc board.
Bootph tags as well as USB device tree nodes are in u-boot.dtsi for now
and will be removed when upstreamed.
The Libra i.MX 8M Plus FPSC is a single board computer. It uses an i.MX
8M Plus FPSC [1] System on Module which utilizes the FPSC standard [2].
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-8m-plus-fpsc
[2] https://www.phytec.eu/en/produkte/system-on-modules/fpsc
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Switch to use CONFIG_PHYTEC_EEPROM_BUS instead of the hard coded value
of 2 for the EEPROM I2C bus for both SPL and U-Boot proper. Possible
since commit 88a1816a9b4e ("board: phytec: common: Add PHYTEC_EEPROM_BUS
to Kconfig").
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
In case of booting from serial loader (USB) we want to always use the
default environment in order to get a defined state that is
independent of any environment stored in persistent memory.
This way we can avoid corruption of the boot process during
development and manufacturing by existing environment settings in
flash.
Signed-off-by: Eberhard Stoll <eberhard.stoll@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
For booting via USB we want to automatically start the fastboot
command in order to access the board via uuu or other tools.
This allows for easier bringup of new boards during development
and manufacturing.
Signed-off-by: Annette Kobou <annette.kobou@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
The header from the local directory should use double quotes instead
of brackets. Otherwise the compiler might not search the local
directory.
Fixes: 93935acc6f1d ("imx: imx6ul: kontron-sl-mx6ul: Select correct boot and env device")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
SL101 unlike TF101/G has no Lid sensor, so lets add a separate env for
SL101 without Lid sensor used.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Linux kernel should use some separate device tree obtained from another
source anyway. For example the dtb file can be read from /boot directory
in eMMC rootfs partition, either by GRUB or U-Boot. Using U-Boot's
device tree blob to provide it to the kernel (when
CONFIG_DEFAULT_FDT_FILE is set and nobody else overrides this choice)
might lead to undesired effects when booting the OS. For example, if a
user sets "dr_mode" property to "host" value in U-Boot's dts to enable
USB host capabilities in U-Boot, it might confuse usb-conn-gpio driver
in Linux kernel later like this:
platform connector: deferred probe pending: usb-conn-gpio:
failed to get role switch
Disable CONFIG_DEFAULT_FDT_FILE option to avoid any possible confusion.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Provide a way for the user to select which storage to load the LDFW
firmware from, by setting the corresponding environment variables:
- bootdev: block device interface name
- bootdevnum: block device number
- bootdevpart: partition number
This might be useful when the OS is flashed and booted from a different
storage device than eMMC (e.g. USB flash drive). In this case it should
be sufficient to just set:
=> setenv bootdev usb
=> env save
assuming that the USB drive layout follows the same partitioning scheme
as defined in $partitions.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
