Note that this undoes the changes of commit cf6d4535cc4c ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
Currently in j721e_init.c we check which firewalls to remove using
the board configuration (e.g CONFIG_TARGET_J721E_R5_EVM). We do this
as J721e and J7200 have different IP and firewalls but use the same
SoC definition (SOC_K3_J721E) even though they are different SoCs.
The idea was they would be similar enough that they both could use
the same SoC config to help with common code sharing. Board checks
would then be used differentiate.
This has grown far too messy to maintain any more, especially now
that there is more than one board using J721e (EVM, SK, Beagle AI64).
As differentiation is done based on board, every one of these boards
would have to have checks added for them. Instead let's split J7200
support out from J721e like how normal new SoC support is done.
This patch touches several subsystems and could not be split much better
as when we add SOC_K3_J7200 we want to make use of it in all spots that
once used the combined SOC_K3_J721E so we can turn off SOC_K3_J721E when
building for J7200 boards.
Signed-off-by: Andrew Davis <afd@ti.com>
Manorit Chawdhry <m-chawdhry@ti.com> says:
The series adds support for J742S2 family of SoCs. Also adds J742S2 EVM
Support and re-uses most of the stuff from the superset device J784s4.
This device is a subset of J784S4 and shares the same memory map and
thus the code is being reused from J784S4 to avoid duplication.
It initially cleans up the J784s4 and AM69 files so that they can be
re-usable for j742s2 and then it introduces J742S2.
The DT for the following SoC will be coming to U-boot during 6.13 Sync
so the series is kept as RFC till then.
Here are some of the salient features of the J742S2 automotive grade
application processor:
The J742S2 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive, ADAS and industrial
applications requiring AI at the network edge. This SoC extends the K3
Jacinto 7 family of SoCs with focus on raising performance and
integration while providing interfaces, memory architecture and compute
performance for multi-sensor, high concurrency applications.
Some changes that this devices has from J784S4 are:
* 4x Cortex-A72 vs 8x Cortex-A72
* 3x C7x DSP vs 4x C7x DSP
* 4 port ethernet switch vs 8 port ethernet switch
* 2 DDR controller vs 4 DDR controller
Test logs:
https://gist.github.com/manorit2001/f7df0e8cca1e9973b4361f0559c6f53d
Link: https://lore.kernel.org/r/20250317-b4-upstream-j742s2-v4-0-4ba88bfd357a@ti.com
Re-use j784s4 clocks and power domains for j742s2 family of device.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Christian Marangi <ansuelsmth@gmail.com> says:
This little series adds initial support for Airoha AN7581 SoC.
With the help of some backport patch, this use OF_UPSTREAM
directly.
Posting this to have the targer and the very basic driver.
Ethernet, SNAND and eMMC support is already ready downstream
and will be posted shortly after this gets approved.
Having the first driver ready permits to separately push
dedicate series for SNAND, eMMC and Ethrnet as they all depends
on basic support of clock and reset and nothing else.
Link: https://lore.kernel.org/r/20250314185941.27834-1-ansuelsmth@gmail.com
Add driver for controlling the reset lines of AN7581. This is a detached
version of the clock controller driver present in Linux only used to
control reset lines. Driver gets loaded with the bind of the clock
driver and doesn't require a compatible. This is needed as they share
the same registers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for Airoha AN7581 SoC clock driver. This mainly needed for
eMMC support to correctly get the current clock applied.
Based on the Linux clk-en7523.c but majorly reworked for U-Boot that
doesn't require CCF subsystem.
Major modification, support for set_rate, realtime get_rate and split
for reset part to a different driver.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The Allwinner A100 SoC has been around for a while, and has now seemingly
been replaced with its close sibling A133.
Add support for the CCU, as far as used by U-Boot proper. Linux has some
basic (clock and pinctrl) support for a while, so we can already use the
existing binding headers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
These helpers wrongly return the updated register value. As a non-zero
value indicates failure, this causes various clock operations are
considered failed.
Correct the return value to constant zero, since these simple MMIO
operations won't fail. This fixes clock enabling failures during booting
process,
In: serial@4140000
Out: serial@4140000
Err: serial@4140000
Net: Enable clock-controller@3002000 failed
failed to enable clock 0
No ethernet found.
which leads to misoperation of various peripherals.
Fixes: 5f364e072e7 ("clk: sophgo: cv1800b: Add clock controller driver for cv1800b SoC")
Tested-by: Yuguo Pei <purofle@gmail.com>
Signed-off-by: Yao Zi <ziyao@disroot.org>
take 2
-----BEGIN PGP SIGNATURE-----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=2n9a
-----END PGP SIGNATURE-----
Merge tag 'qcom-next-20250324' of https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon into next
qcom-next-20230324:
* msm8916 gets proper sysreset and spin-table support
* The first new IPQ platform is added - the IPQ9574. The IPQ series are
used in routers. The flashing process is also documented
* mach-snapdragon gains the ability to boot with an internal FDT and
still parse memory from an externally provided one
* SC7280 gets a pinctrl driver and various clock driver improvements.
* Qualcom clock drivers will now actually return an error when
attempting
to enable a clock which isn't described.
* Qualcomm pinctrl drivers will now return an error when attempting to
configure an invalid function mux
Pass struct udevice * into imx_clk_fixed_factor*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-fixed-factor registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_divider*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-divider clock registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_pllv3*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Convert clock-osc-24m back to osc_24m and clock-osc-32k back to osc_32k.
These are the clock which match clock tables in Linux. This is now
possible because the clock drivers now resolve clock names based on
clock-names DT property in the CCM DT node.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_composite*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in clk-composite registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass U-Boot specific struct udevice pointer to clock parent device
to clk_register_gate*(), so clk_register_gate*() can access the parent
udevice.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_gate*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Use U-Boot specific struct udevice instead of Linux compatibility
struct device in gate2 clock registration.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass U-Boot specific struct udevice pointer to clock parent device
to clk_register_mux(), so clk_register_mux() can access the parent
udevice.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into imx_clk_mux*() functions, so the
clock core would have access to parent struct udevice *.
Signed-off-by: Marek Vasut <marex@denx.de>
Use clock-names property which is accessible via parent clock OF node
to look up the parent clock by name instead of depending on unreliable
global clock name to perform look up.
Signed-off-by: Marek Vasut <marex@denx.de>
Neither clk_register_mux_table() nor clk_hw_register_mux_table()
are called outside of clk-mux.c , fold both into clk_register_mux().
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Add clk_resolve_parent_clk() to resolve parent clock udevice name
based on clock-names DT property. This is used in SoC clock drivers
to look up the clock name in clock tables, which matches a clock
name in DT clock-names property, and convert it into udevice name
which is used by U-Boot clock framework to look up parent clock in
e.g. clk_register() using uclass_get_device_by_name(UCLASS_CLK,
parent_name, &parent);
Signed-off-by: Marek Vasut <marex@denx.de>
If SPL_CLK_IMX8MP is selected alone, it causes a build error.
The clock composite is required when using the clock framework, so
select it when SPL_CLK_IMX8MP is enabled. This is already being
done outside of SPL.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
In order to let the serial driver enable the clocks, the UART clocks
must be registered first.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
In order to let the serial driver enable the clocks, the UART clocks
must be registered first.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
In order to use the driver model and clock system to enable UART
clocks from the serial driver, it's necessary to register the UART
clocks. With the helper function to check for imx6qp vs other
variants, the UART can register for both scenarios.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The ECSPI clock has the ability to select between pll3_60m and
osc on the imx6qp, where it's fixed on other variants. Fix this
by adding using a helper function to determine SoC variant and
register the clock accordingly.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Add support for a bunch of new clocks, including PCIe, GENI (for all
peripherals used on the RB3 Gen 2), and some missing USB clocks.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250314-sc7280-more-clocks-v1-3-ead54487c38e@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
If we try to enable a gate clock that doesn't exist, we used to just
fail silently. This may make sense for early bringup of some core
peripherals that we know are already enabled, but it only makes
debugging missing clocks more difficult.
Bubble up errors now that qcom_gate_clk_en() can return an error code to
catch any still-missing clocks and make it easier to find missing ones
as more complicated peripherals are enabled.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250314-sc7280-more-clocks-v1-1-ead54487c38e@linaro.org
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
This clock needs to be enabled for the msm-rng driver to work on
MSM8916, otherwise accessing the PRNG register block causes a data
abort.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sam Day <me@samcday.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250212-msm-rng-fixes-v2-2-645cf8d3fd3c@samcday.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
This reads a little bit nicer (IMO), and is consistent with the kernel.
Signed-off-by: Sam Day <me@samcday.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250212-msm-rng-fixes-v2-1-645cf8d3fd3c@samcday.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add initial set of clocks and resets for enabling U-Boot on ipq9574
based RDP platforms.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20250226064505.1178054-4-quic_varada@quicinc.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Following on from commit 9a699a0a0d62 ("clk: rzg2l: Ignore enable for
core clocks"), we also need to ignore attempts to disable core clocks to
avoid the need for conditionals around clk_disable_bulk() calls in
drivers which support both RZ/G2L and other Renesas SoCs.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
-----BEGIN PGP SIGNATURE-----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=xGcd
-----END PGP SIGNATURE-----
Merge tag 'v2025.04-rc4' into next
This uses Heinrich's merge of lib/efi_loader/efi_net.c which results in
no changes.
