While we continue to have some systems which support extremely legacy
OS booting methods, we do not have use cases for supporting this in
Falcon mode anymore. Remove this support and references from the
documentation.
Co-developed-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Synchronize upper_NN_bits() and lower_NN_bits() macros with Linux 6.16
commit 118d777c4cb4 ("wordpart.h: Add REPEAT_BYTE_U32()"). This fixes the
lower_32_bits() macros and assures it works with 64bit systems correctly.
This also adds 16bit variants of these macros, which will be used by the
Airoha PHY driver.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
SoCFPGA updates for v2025.10:
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27762
This pull request brings a set of updates across SoCFPGA platforms
covering Agilex5, Agilex7, N5X, and Stratix10. The changes include:
* Agilex5 enhancements:
- USB3.1 enablement and DWC3 host driver support
- System Manager register configuration for USB3
- Watchdog timeout increase and SDMMC clock API integration
- dcache handling improvements in SMC mailbox path
- Enable SPL_SYS_DCACHE_OFF in defconfig
* Clock driver improvements:
- Introduce dt-bindings header for Agilex clocks
- Add enable/disable API and EMAC clock selection fixes
- Replace manual shifts with FIELD_GET usage
* DDR updates:
- IOSSM mailbox compatibility check
- Correct DDR calibration status handling
* Device tree changes:
- Agilex5: disable cache allocation for reads
- Stratix10: add NAND IP node
- Enable driver model watchdog
- Enable USB3.1 node for Agilex5
* Config cleanups:
- Simplify Agilex7 VAB defconfig
- Remove obsolete SYS_BOOTM_LEN from N5X VAB config
- Enable CRC32 support for SoCFPGA
- Increase USB hub debounce timeout
Overall this set improves reliability of DDR and cache flows,
adds missing USB and MMC features for Agilex5, and refines clock
and configuration handling across platforms.
This patch set has been tested on Agilex 5 devkit, and Agilex devkit.
Introduce header file to define the clock indexes for the Agilex
platform.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Rasmus Villemoes <ravi@prevas.dk> says:
This all started from me wondering "why does this standalone app end
up being so huge"? Oh, it essentially links in its own standard C
library to get strlen() and snprintf(). Which then led to asking "why
don't we export all those standard C functions when we have them
anyway?".
CI has chewed on these and seem happy - it was CI which told me about
the necessity of [1/9]: https://github.com/u-boot/u-boot/pull/813
Link: https://lore.kernel.org/r/20250919101002.568488-1-ravi@prevas.dk
There have been quite a few changes to _exports.h since the last
update of XF_VERSION, also before the previous patches in this series.
I doubt the mechanism is actually being used in practice, it is simply
too fragile: Not only does the list of exported functions depend on
.config, so with the same XF_VERSION the jump table entries could have
different offsets. But getting to the jump table itself from gd to
even call the ->get_version() is fragile, since offsetof(gd_t, jt)
can, and does, change. For example, as recently as commit
d9902107027 ("global_data: Remove jump table in SPL").
One really must build one's standalone app against the proper U-Boot
version and config.h. But for good measure, do bump it now.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
The current list of exported functions lacks quite a few bog-standard C
library functions that we might as well expose, since U-Boot certainly
has them implemented anyway. There's no reason a standalone
application should have its own strlen() implementation or link in a
copy from some tiny libc.
For a customer's standalone app, this means it goes from 95K to 10K.
More importantly, we can ditch the custom toolchain including a
newlibc used to build the standalone app and just use the same
toolchain as used to build u-boot itself.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
The current list of exported functions is somewhat of a
mess. Reorganize them so that related functionality is kept together:
- console I/O: move vprintf next to printf and the getc/putc functions
- integer parsing: move the *strto* functions together
- standard string.h stuff: move memset() and strcpy() next to strcmp()
- time: move mdelay() next to udelay() and get_timer()
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
After finishing a later patch in this series, I discovered I had
neglected to update the list of declarations in exports.h to
match. But then I realized I wasn't the first to do that.
Use the existing mechanism and DRY it out.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
As for the i2c functions, drop the dummy entries that, if ever used,
would just have the standalone app get some random content in the
return register.
While deprecated, the spi_{setup,free}_slave functions do exist even
with CONFIG_DM_SPI - and a standalone app can't really do anything but
refer to a spi device via a (bus, cs) pair.
Eventually, one should probably export some function that could allow
a standalone app to get a struct udevice* corresponding to either a
full DT path, an alias, or perhaps a label (provided one builds with
-@), and then export functions that can operate on that.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
There's really no good reason to create stub entries that would call a
function that doesn't even return anything sensible.
The existence of these two i2c_* functions depends on
CONFIG_IS_ENABLED(SYS_I2C_LEGACY), which does depend on !DM_I2C, but
is not equivalent to it. They are probably rather hard to use unless
CMD_I2C and something in U-Boot has called "i2c dev foo" to set the
current i2c bus before calling the standalone app, so keep that
dependency.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Currrently, malloc and free are function-like macros, while calloc,
realloc and memalign are object-like macros.
Usually, this doesn't matter, but it does when the identifiers appear
without a following open parenthesis, such as when their address is
taken for building the export table. Adding calloc or realloc to that
table breaks the build on sandbox due to this inconsistency.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add board-level code and defconfig for the i.MX943 EVK board, supporting
multiple SOM variants: 19x19 LPDDR5, 19x19 LPDDR4 and 15x15 LPDDR4.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
System Manager provides the last booted and shutdown reasons of the
logical machines (LM) and system using the SCMI misc protocol (Protocol
ID: 0x84, Message ID: 0xA). This path adds get_reset_reason() to query
and print these reasons in SPL and U-Boot.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
The android boot header is page aligned but the current code made the
assumption that the header was always smaller than the current header
format.
When the page_size is defined as 2048, as this is the case with the
cuttlefish target, the current code sets the end of the header in the
middle of it as the v3 and v4 headers are respectively 2112 and 2128
bytes long.
Fix that by aligning to page_size
Fixes: 1115027d2f75 ("android: boot: update android_image_get_data to support v3, v4")
Signed-off-by: Guillaume Ranquet <ranquet.guillaume@gmail.com>
The ahab_commit command allows the user to commit into the SECO fuses
that control the SRK key revocation information. This is used to Revoke
compromised SRK keys.
To use ahab_commit, the boot container must be built with an SRK
revocation bit mask that is not 0x0. For the SPSDK provided by NXP, this
means setting the 'srk_revoke_mask' option in the config file used to
sign the boot container. The 'ahab_commit 0x10' can then be used to commit
the SRK revocation information into the SECO fuses.
Signed-off-by: John Ripple <john.ripple@keysight.com>
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> says:
In the qemu-sbsa configuration, the GICv3 definition is disabled due to
a typo. After fixing the typo, GICv3 is enabled, however, the GIC register
base address definitions are missing, resulting in a build failure.
This series enables GICv3 and resolves this build error.
Confirming that U-Boot successfully starts up in QEMU SBSA environment
after the fix.
Link: https://lore.kernel.org/r/20250910092327.279749-1-hayashi.kunihiko@socionext.com
If GICV3 is enabled, GICD_BASE and GICR_BASE are needed at
arch/arm/cpu/armv8/start.S.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Some of the functions in this file do not follow the normal style. Fix
this so that things are more consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Setting fdt_high to all ones is discouraged and does not appear to be
useful for RISC-V QEMU. Moreover, it causes a boot failure when the FDT
generated internally by QEMU is used while booting. Remove it to allow
U-Boot to pick a suitable address and relocate the FDT.
Closes: https://lore.kernel.org/u-boot/8397369a-9b0b-4798-9c30-3a81165657d6@iscas.ac.cn
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Make all Icicle Kit files generic. This supports the addition of
upcoming support for other MPFS boards.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Remove the fdt_high environment variable, as a value of all ones
indicates using the FDT in place. This setting is incorrect for the
current board.
Signed-off-by: Randolph Lin <randolph@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
It's important to return the actual firmware data size as some
firmware files may have no checksum and need the size as the only
way for firmware validation check.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
The CONFIG_ENV_VARS_UBOOT_CONFIG should protect only U-Boot
configuration variables in environment, those are arch, cpu,
board, board_name, vendor, soc. It should certainly not hide
usb_ignorelist or env_fdt_path from the environment. Fix it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Introduce two new parameters to be used with mkimage -f auto to bundle
TFA BL31 image into fitImage, using auto-generated fitImage. Add -y to
specify TFA BL31 file name and -Y to specify TFA BL31 load and entry
point address. This is meant to be used with systems which boot all of
TFA BL31, Linux and its DT from a single fitImage, all booted by U-Boot.
Example invocation:
"
$ mkimage -E -A arm64 -C none -e 0x50200000 -a 0x50200000 -f auto \
-d arch/arm64/boot/Image \
-b arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dtb \
-y ../tfa/build/rcar_gen4/release/bl31.bin -Y 0x46400000 \
/path/to/output/fitImage
"
Documentation update and test are also included, the test validates
both positive and negative test cases, where fitImage does not include
TFA BL31 and does include TFA BL31 blobs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Replace #define<TAB> with #define<space> to be consistent in
the entire file. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add omap common environment variables to .env. We retain the old-style C
environment .h files to maintain compatibility with other omap devices that
have not moved to using .env yet.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Add new imx8mp-libra-fpsc board.
Bootph tags as well as USB device tree nodes are in u-boot.dtsi for now
and will be removed when upstreamed.
The Libra i.MX 8M Plus FPSC is a single board computer. It uses an i.MX
8M Plus FPSC [1] System on Module which utilizes the FPSC standard [2].
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-8m-plus-fpsc
[2] https://www.phytec.eu/en/produkte/system-on-modules/fpsc
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
PCA9450 PMIC supports reading the reset status from the PWRON_STAT
register. Bits 7-4 give indication of the PMIC reset cause:
- PWRON (BIT7) - Power ON triggered by PMIC_ON_REQ input line,
- WDOGB (BIT6) - Boot after cold reset by WDOGB pin (watchdog reset),
- SW_RST (BIT5) - Boot after cold reset initiated by the software,
- PMIC_RST (BIT4) - Boot after PMIC_RST_B input line trigger.
Add support for reading reset status via the sysreset framework in a
convenient printable format.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The family of PCA9450 PMICs have the ability to perform system resets.
Restarting via PMIC is preferred method of restarting the system as all
the peripherals are brought to a know state after a power-cycle. The
PCA9450 features a cold restart procedure which is initiated by an I2C
command 0x14 to the SW_RST register.
Support in Linux for restarting via PCA9450 PMIC has been added by
Linux commit 6157e62b07d9 ("regulator: pca9450: Add restart handler").
Now add support for it also in the U-Boot via sysreset framework.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The code in tps65910_regulator.c treats the field supply in struct
tps65910_regulator_pdata as an int and even tests the value for being
negative so change it from a u32 to int so that the code all works as
expected.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The commends in include/power/pmic.h say that once SPL_DM_PMIC exists we
should update things. This has been true for some time, so let us update
this to have the legacy portions in their own header, which should not
be directly included. This cleans up the logic within the file too
slightly.
Signed-off-by: Tom Rini <trini@konsulko.com>
The RK806 PMIC has a bitfield for configuring the restart/reset behavior
(which I assume Rockchip calls "function") whenever the PMIC is reset
either programmatically (c.f. DEV_RST in the datasheet) or via PWRCTRL
or RESETB pins.
For RK806, the following values are possible for RST_FUN:
0b00 means "Restart PMU"
0b01 means "Reset all the power off reset registers, forcing
the state to switch to ACTIVE mode"
0b10 means "Reset all the power off reset registers, forcing
the state to switch to ACTIVE mode, and simultaneously
pull down the RESETB PIN for 5mS before releasing"
0b11 means the same as for 0b10 just above.
This adds the appropriate logic in the driver to parse the new
rockchip,reset-mode DT property to pass this information. It just
happens that the values in the binding match the values to write in the
bitfield so no mapping is necessary.
For backward compatibility reasons, if the property is missing we set it
to 0b10 (i.e. BIT(7)) like before this commit was merged instead of
leaving it untouched like in the kernel driver.
Note that this does nothing useful for U-Boot at the moment as the ways
to reset the device (e.g. via `reset` command) doesn't interact with the
RK8xx PMIC and simply does a CPU reset.
Considering the upstream Linux kernel left this register untouched until
(assumed) v6.17[1], this is useful for cases in which the U-Boot
bootloader has this patch (and running with a DT with
rockchip,reset-mode property set) and running an upstream kernel before
(assumed) v6.17, or alternatively later without the property in the
kernel DT.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/commit/?id=87b48d86b77686013f5c2a8866ed299312b671db
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
rk3288 is missing fdtoverlay_addr_r.
The new addresses match those used by rk3308.
Tested on Asus TinkerBoard S.
Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@vrull.eu>
Cc: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit introduces a new API,
request_firmware_into_buf_via_script(), to the fs_loader framework.
This function allows firmware to be loaded into memory using
a user-defined U-Boot script, providing greater flexibility for
firmware loading scenarios that cannot be handled by static file
paths or device/partition selection alone.
Key features:
- The API runs a specified U-Boot script (by name), which is responsible
for loading the firmware into memory by any means (e.g., load from MMC, USB, network, etc.).
- The script must set two environment variables: 'fw_addr'
(the memory address where the firmware is loaded) and
'fw_size' (the size of the firmware in bytes).
- The function validates these variables, copies the firmware into a newly
allocated buffer (using memdup), and returns the pointer
via the provided double pointer argument.
- The maximum allowed firmware size is checked to prevent buffer overflows.
- The environment variables are cleared after use to avoid stale data.
- Detailed error messages are provided for all failure conditions to aid debugging.
Usage example:
1. Define a U-Boot script in the environment that loads the firmware
and sets the required variables:
=> env set my_fw_script 'load mmc 0:1 ${loadaddr} firmware.bin &&
env set fw_addr ${loadaddr} && env set fw_size ${filesize}'
2. In your code, call the new API:
void *fw_buf = NULL;
int ret = request_firmware_into_buf_via_script(&fw_buf, 0x46000000, "my_fw_script");
if (ret < 0)
return ret;
This approach allows board integrators and users to customize the firmware
loading process without modifying the source code,
simply by changing the script in the U-Boot environment.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[trini: Fix printf of size_t needing to use %zx]
Signed-off-by: Tom Rini <trini@konsulko.com>
Add usb_pgood_delay to ensure proper detection of USB devices.
Increase the USB power good delay for versal2 specific boards,
as certain USB sticks may not be detected without it.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20250818045304.4058177-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
