Introduce the DNS Kconfig symbol so that various network commands may
use host names without the dns command (CMD_DNS) being selected.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
CC: E Shattow <e@freeshell.de>
Add documentation for Voyager board.
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Documentation:
* Describe running U-Boot as a pflash image on RISC-V QEMU
* Correct the description of the bootph-verify device-tree property
UEFI:
* In mkeficapsule fix a resource leak in read_bin_file()
* Support loading a Linux initial RAM disk with the bootefi command.
-----BEGIN PGP SIGNATURE-----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=EYD3
-----END PGP SIGNATURE-----
Merge tag 'efi-2025-10-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-10-rc2
Documentation:
* Describe running U-Boot as a pflash image on RISC-V QEMU
* Correct the description of the bootph-verify device-tree property
UEFI:
* In mkeficapsule fix a resource leak in read_bin_file()
* Support loading a Linux initial RAM disk with the bootefi command.
use the new email address for community work.
While at it, cleanup git shortlog output, by adding
fixes in .mailmap
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Fix typo: change 'TPL' to 'VPL'.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
It is sometimes useful to be able to boot via EFI using a Linux initrd.
Add support for this.
Fix a 'specifiy' typo while here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Bryan Brattlof <bb@ti.com> says:
The AM62Ax was created right when TI was shifting to their high security
(HS-FS and HS-SE) processes. During this transition a small subset of
AM62A parts where configured to use the old "GP" security for internal
and for select groups of partners but never sold for the wider public.
To help simplify the build and to avoid any confusion of which security
configurations are supported going forward remove the GP builds for the
AM62A SoCs.
Link: https://lore.kernel.org/r/20250729-no-62a-gp-v1-0-1dbdb4469ad3@ti.com
The AM62Ax SoC family was the last part from TI to support the GP
security variant, however this security variant was used mostly
internally and with select early partners and never sold publicly.
To simplify things and to avoid any confusion of which parts are
supported in the future, remove the GP tiboot3.bin builds from binman.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Enable i3c general uclass driver. This uclass driver will have
genaral read and write api to call the specific i3c driver.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
The Auto Negotiation procedure between two Ethernet PHYs consists of
determining the best commonly supported parameters among Speed,
Duplex Mode and Flow Control.
The time taken for this procedure is not only dependent on the local
PHY used, but also on the link-partner PHY.
While a timeout can be specified in the form of a "CONFIG" on the basis
of the local PHY present on the device, since the timeout also depends
on the link-partner PHY, it might be necessary to modify the timeout.
To avoid rebuilding the bootloader for a given device, just because it
may be connected to various link-partner PHYs, each with a different
timeout, introduce an environment variable named "phy_aneg_timeout" and
override "CONFIG_PHY_ANEG_TIMEOUT" with "phy_aneg_timeout".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
[jf: add missing #include <env.h>]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The Galaxy R (GT-I9103) and Captivate Glide (SGH-i927) are both Tegra 2
based Samsung smartphones released in 2011. They both feature 1 GB of RAM
and 8 GB of expandable flash memory. The key difference is that the
Captivate Glide has an OLED panel (contrary to LCD in Galaxy R) and a
QWERTY keyboard in form factor of a slider.
Signed-off-by: Ion Agorria <ion@agorria.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Pegatron Chagall (originally built by Pegatron, but later rebranded by
other vendors under names Fujitsu Stylistic M532, Olivetti Olipad 3,
Siragon 4N, Realpad Bunaken, DNS AirTab P110w / P110g etc) is a mostly
business-oriented tablet sold in 2012 in different variants, mostly in
Europe, with slight differences in storage size (16GB/32GB) and presence
of built-in cellular modem.
Tested-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Agilex5 FSBL is required to disable the power of unused peripheral SRAM
blocks to reduce power consumption.
Introducing a new power manager driver for Agilex5 which will be called
as part of Agilex5 SPL initialization process.
This driver will read the peripheral handoff data obtained from the
bitstream and will power off the specified peripheral's SRAM from the
handoff data values.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Update the FIT signature testing instructions to use the pytest suite instead of
the old vboot_test.sh script.
Signed-off-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
The J784S4 and AM69 Platforms page only details the defconfigs for
J784S4.
Mention the ones needed for AM69-SK as well, to guide users on how to
build for that board.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Create a Kconfig which indicates that EFI functionality is in use,
either as a client (EFI app / stub) or provider (EFI loader). This will
make it easier to share code between these two parts of U-Boot
Signed-off-by: Simon Glass <sjg@chromium.org>
The generic name 'EFI' would be more useful for common EFI features. At
present it just refers to the EFI app and stub, which is confusing.
Rename it to EFI_CLIENT
Signed-off-by: Simon Glass <sjg@chromium.org>
This directory was created when U-Boot gained the ability to run as an
EFI app in 2015. Since then the EFI-loader feature has been added.
The code in lib/efi is not actually used by the loader, so the name is
confusing.
Rename the directory to efi_client to indicate that it includes files
just for U-Boot being a client of EFI, i.e. the EFI app and stub.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that USB is enabled on the E850-96 board, DFU and fastboot tools are
functional and can be used to flash images to eMMC. Update the E850-96
documentation accordingly and describe flashing to User Data Area and
Boot HW Partition of eMMC using fastboot and DFU tools.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Fastboot currently supports MMC and NAND flash devices. Similarly,
extend the support to SPI flash memories.
Note that in this initial implementation, partitions on the device are
not supported yet, but raw partitions can be set in U-Boot environment.
To define a raw partition descriptor, add an environment variable
similar to the MMC case:
```
fastboot_raw_partition_<raw partition name>=<offset> <size>
```
for example:
```
fastboot_raw_partition_boot=0x0 0x1000000
```
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Use new email for community work. Also remove my
capricorn SoM maintainer entry since I do not
have access to this hardware anymore.
Signed-off-by: Anatolij Gustschin <ag.dev.uboot@gmail.com>
This is only a reformatting, with a few grammar fixes (capitalization,
and a missing "is" and "be" added each).
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Cc: Tom Rini <trini@konsulko.com>
Correct the references for
* the x86 boot protocol description
* the FIT file format
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Introducing documentation support for Qualcomm Dragonwing IQ8 QCS8300
board. Documents the build and flashing steps.
Signed-off-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>
The GitHub dependabot tool has reported a number of issues recently with
some modules that we use. While unlikely to be exploitable in the way we
use them, update various libraries to the latest.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <trini@konsulko.com>
i.MX95 B0 uses image container format v2 and needs DUMMY_DDR so that
update imximage.cfg and container.cfg for it.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.
One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.
The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add a proper documentation file for the sntp command in RST format and
drop doc/README.SNTP. The documentation now includes the NET_LWIP
specificities.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
This option is very useful for A/B boot setups with read-only
filesystems: Letting U-Boot fill in the rootfs (and possibly related
parameters) allows keeping all boot parameters except the actual slot
selection in the extlinux.conf file, where they can be updated easily.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Cc: Tom Rini <trini@konsulko.com>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
The LMB module has a bunch for API's which are used for allocating
memory. There are a couple of API's for requesting memory, and two
more for reserving regions of memory. Replace these different API's
with a single one, lmb_alloc_mem(). The type of allocation to be made
is specified through one of the parameters to the function.
Additionally, the two API's for reserving regions of memory,
lmb_reserve() and lmb_alloc_addr() are the same with one
difference. One can reserve any memory region with lmb_reserve(),
while lmb_alloc_addr() actually checks that the memory region being
requested is part of the LMB memory map. Reserving memory that is not
part of the LMB memory map is pretty futile -- the allocation
functions do not allocate memory which has not been added to the LMB
memory map.
This series also removes the functionality allowing for reserving
memory regions outside the LMB memory map. Any request for reserving a
region of memory outside the LMB memory map now returns an -EINVAL
error.
Certain places in the common code using the LMB API's were not
checking the return value of the functions. Checks have been added for
them. There are some calls being made from the architecture/platform
specific code which too do not check the return value. Those have been
kept the same, as I do not have the platform with me to check if it
causes any issues on those platforms.
In addition, there is a patch which refactors code in
lmb_overlaps_region() and lmb_can_reserve_region() so that both
functionalities can be put in a single function, lmb_overlap_checks().
Finally, a new patch has been added which checks the return value of
the lmb allocation function before copying the device-tree to the
allocated address.
Link: https://lore.kernel.org/r/20250617104346.1379981-1-sughosh.ganu@linaro.org
[trini: Rework arch/arm/mach-snapdragon/board.c merge]
Signed-off-by: Tom Rini <trini@konsulko.com>
The LMB module has undergone significant changes in the recent
past. Add a document which briefly describes what the LMB module does,
and the changes that have been made to it's design since the 2025.01
release.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This PR introduces 3 new platforms, two from the new Dragonwing IQx
series (QCS615 and QCS8300) as well as the IPQ5424.
Additionally:
* Support for booting downstream Android boot images on some phones is
added
* Capsule update support is expanded to be more generic, determining
which partition U-Boot was flashed to automatically and supporting
many more boards.
* Minor capsule update bugs are fixed
* A watchdog driver is added and gets timeout support
* Autoboot now requires pressing "space" specifically to stop booting as
a workaround for some boards getting rogue key presses which would
cause autoboot to fail
* Documentation is added for the Dragonwing boards
* The RB1/2 now use USB gadget mode rather than host
* A bug is fixed where GPIO reads could return incorrect values
The mkmbn tool isn't available yet, so it's still necessary to use
qtestsign for signing.
Update the docs to describe it, this can be reverted once mkmbn and the
associated tooling is merged.
Link: https://lore.kernel.org/u-boot/20250616162626.247802-1-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
As required e.g. on Fairphone 5, add an example how to use boot image
with header version 2.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250611-qualcomm-doc-update-v1-3-5cf8cd94974d@fairphone.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
This command does not work as described in this doc, so replace it with
a regular make with qcom_defconfig, as already used for other
defconfigs.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250611-qualcomm-doc-update-v1-2-5cf8cd94974d@fairphone.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
One needs to set CROSS_COMPILE also for the actual compilation, not just
for the kconfig step, otherwise the host arch compiler would be used.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250611-qualcomm-doc-update-v1-1-5cf8cd94974d@fairphone.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
