The legacy network stack sets net_try_count to 1 at the beginning of the
net_loop() function. This is required for net_start_again() to work
properly. Therefore, set the variable accordingly in the do_ping()
function when NET_LWIP=y. This fixes an issue where a ping to an
unreachable destination would run twice on the same network device. For
example with qemu_arm64_lwip_defconfig:
=> dhcp
DHCP client bound to address 10.0.2.15 (3 ms)
=> ping 10.0.0.1
Using virtio-net#32 device
ping failed; host 10.0.0.1 is not alive
Using virtio-net#32 device
ping failed; host 10.0.0.1 is not alive
=> QEMU: Terminated
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Now that sys_check_timeouts() is called in net_lwip_rx(), there is no
need to call it from the SNTP receive loop. Remove the redundant call.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Introduce the DNS Kconfig symbol so that various network commands may
use host names without the dns command (CMD_DNS) being selected.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
CC: E Shattow <e@freeshell.de>
It is sometimes useful to be able to boot via EFI using a Linux initrd.
Add support for this.
Fix a 'specifiy' typo while here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Use the same logic as is used for MAC address where bdi shows mac address
for current device where index (idx) is used to point to correct IP address
which is read and show.
Signed-off-by: Michal Simek <michal.simek@amd.com>
mac_read_from_eeprom() always display debug infos, and this messes up the
display of the "Net:" section details:
Before:
Net: EEPROM: TlvInfo v1 len=172
eth0: ethernet@11c20000
After:
Net: eth0: ethernet@11c20000
Fix by moving unconditional "EEPROM: " header into each message and
changing debug message to use log_debug().
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Fix typo errors in comments and error message by replacing EERPOM->EEPROM.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
In do_bootvx the environment variable 'bootdev' is fetched and copied
into a buffer without confirming that it will not overflow that buffer.
Use strlcpy to ensure that the buffer will not be overflowed.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
The generic name 'EFI' would be more useful for common EFI features. At
present it just refers to the EFI app and stub, which is confusing.
Rename it to EFI_CLIENT
Signed-off-by: Simon Glass <sjg@chromium.org>
uclass_find_next_device always returns 0, so instead make it a void and
update calling sites.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Errors reported by GCC 14.2 when enabling FPGA commands and
drivers. Also many style fixes as reported by checkpatch.pl on the
diffs. Most changes in stratixII.c which has been reorganized as well
to avoid the top function prototypes.
No functional changes.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Link: https://lore.kernel.org/r/20250708152455.1214487-4-vtpieter@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
In cmd/fpga.c, change some `debug` calls to `log_err` for important
user feedback and use CMD_RET_FAILURE in favor of CMD_RET_USAGE due to
its long output which hides the actual, useful return message. Change
the remaining `debug` calls to `log_debug`. Remove all 'fpga:' and
__func__ strings as log_* has this covered.
For `do_fpga_loads`, move up the `do_fpga_check_params` call for more
consistent command output; use a constant instead of multiple '5' use.
In drivers/fpga/zynq*.c, change 'up to' to 'above' which corrects this
confusing/wrong statement.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Link: https://lore.kernel.org/r/20250708152455.1214487-2-vtpieter@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The buffer for a name to be copied into must also contain the
terminating 0 byte but strlen returns the length of the string without
counting that 0 byte. Adjust the length checks to take this into
account.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
i2c updates for v2025.10
- i2c Kconfig updates from Tom
- add some driver dependencies
- added missing include delay.h in iproc_i2c.c
- i2c: muxes: Add PCA9541 i2c arbitrator driver
from Padmarao Begari
- pca954x: add pca9545 support
from Frank Wunderlich
- cmd: i2c: fix build when CFG_SYS_I2C_NOPROBES defined with DM_I2C
From Holger Brunck
When DM_I2C is enabled and CFG_SYS_I2C_NOPROBES is defined, the
building is broken due to already existing 'bus' local variable.
Rename udevice 'bus' to 'cur_bus' to fix this.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
The local variable size is not assigned to before it is used
for the first time. Correct this.
This issue was found by Smatch.
Fixes: 86d462c05d57 (cmd: add a fetch utility)
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20250626-ufetch_fix-v1-1-025afdb85dc2@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
This adds new aes subcommands to use interface provided by AES UCLASS which
can be used to expose HW AES engines.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/27010
- Fix the i.MX8M Nano GPU path.
- Enable RNG support for KASLR on Toradex i.MX8 boards.
- Enable watchdog and clock driver for imx6ulz_smm_m2b.
- Tighten dependencies on CMD_BLOB.
- Remove the rest of i.MX31 support.
In order to build this command we need to have configured some other
board specific features. Express that requirement in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
In order for this command to build we need to compile
drivers/crypto/fsl/fsl_blob.c and this in turn includes
drivers/crypto/fsl/jr.h which references "ccsr_sec_t" which is only a
defined type for SYS_FSL_SEC_COMPAT >= 4. Express that requirement in
Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> says:
In some use cases, board-specific device tree changes must not be overwritten
by system fixups. Although U-Boot provides ft_board_setup_ex() for this
purpose, it is currently only used on TI Keystone. This series makes
ft_board_setup_ex() a generic option, allowing its use by other architectures
and boards.
Additionally, considering that Toradex Verdin-AM62P hardware lifetime
guarantees are based on a 105°C junction temperature (while TI AM62Px supports
up to 125°C), this series implements necessary changes within TI K3 AM62P and
Toradex board code. These changes include exporting common fixup device Tree
functions used in TI K3 for board-code access and also fixup for AM62P thermal
zones to correctly reflect the number of CPU nodes according to the SoC part
number.
Link: https://lore.kernel.org/r/20250623-am62p-fdt-fixup-trip-points-v1-0-12355eb6a72f@toradex.com
In some use cases, board-specific device tree changes must not be
overwritten by system fixups. Although U-Boot provides
ft_board_setup_ex() for this purpose, it is currently only used on TI
Keystone. Make ft_board_setup_ex() to be a generic option, allowing its
use by other architectures/boards. To maintain backward compatibility,
enable it by default on TI Keystone.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Add option to disable help command in size constrained systems to save some
space. There is also no need to have ifdefs around CMDLINE because all
commands depends on it.
And also mark cmd_help dependency in test_help.py.
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c17f825fb8a74e1d1912a3fd09a9a880c84a8bfd.1751286059.git.michal.simek@amd.com
Update the ping command so that a host name is accepted in addition to
an IP address, provided DNS support is enabled.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
When calling "dns <hostname> <varname>", do not print out the IP address
of <hostname> onto the console. Print it only when no variable is
passed. The reason is to be able to call do_dns() from another command
in need of the DNS services without polluting the output.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The DNS loop checks for a non-zero IP address after DNS resolution, but
the address is in fact never copied into the context. Fix that.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Split net/lwip/wget.c in two: one part which implements CONFIG_WGET
stays in net/ while the part that implements CONFIG_CMD_WGET is moved
into cmd/.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Move each command in cmd/net-lwip.c into its own file
(cmd/lwip/${cmd}.c).
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Prepare to split the ping command from cmd/net-lwip.c by moving the
implementation from net/lwip/dns.c to cmd/lwip.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Prepare to split the dns command from cmd/net-lwip.c by moving the
implementation from net/lwip/dns.c to cmd/lwip.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The eficonfig command provides a menu based interface for maintenance
of the EFI boot options. Add support for adding a URI based boot
option. This boot option can then be used for HTTP boot.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Initialise vhdr to prevent its use when uninitialised.
This issue was found with Smatch.
Fixes: 636da2039aea (android: boot: support boot image header version 3 and 4)
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Link: https://lore.kernel.org/r/20250625-abootimg_fix-v4-1-df7af00e87b0@linaro.org
[mkorpershoek: fixed trivial typo in commit msg]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Now that the enum includes TPM2_ALG_INVAL, use that name in the
code.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
DHCP and DHCPv6 use the same value defined in
https://www.iana.org/assignments/dhcpv6-parameters#processor-architecture
to encode the processor architecture type. We should only use a single
Kconfig symbol for both protocols.
Furthermore we should make the value customizable. This allows for instance
to choose between "x86 BIOS" or "x64 UEFI".
As "x86 BIOS" is encoded as 0, we should not use this value to switch
off transmission of the DHCP option. Use 0xFF instead.
Link: https://lore.kernel.org/r/20250608074228.12407-1-heinrich.schuchardt@canonical.com
DHCP and DHCPv6 use the same value defined in
https://www.iana.org/assignments/dhcpv6-parameters#processor-architecture
to encode the processor architecture type. We should only use a single
Kconfig symbol for both protocols.
Furthermore we should make the value customizable. This allows for instance
to choose between "x86 BIOS" or "x64 UEFI".
As "x86 BIOS" is encoded as 0, we should not use this value to switch
off transmission of the DHCP option. Use 0xFF instead.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Change from "Baseboard Information" to "Chassis information".
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
The LMB module has a bunch for API's which are used for allocating
memory. There are a couple of API's for requesting memory, and two
more for reserving regions of memory. Replace these different API's
with a single one, lmb_alloc_mem(). The type of allocation to be made
is specified through one of the parameters to the function.
Additionally, the two API's for reserving regions of memory,
lmb_reserve() and lmb_alloc_addr() are the same with one
difference. One can reserve any memory region with lmb_reserve(),
while lmb_alloc_addr() actually checks that the memory region being
requested is part of the LMB memory map. Reserving memory that is not
part of the LMB memory map is pretty futile -- the allocation
functions do not allocate memory which has not been added to the LMB
memory map.
This series also removes the functionality allowing for reserving
memory regions outside the LMB memory map. Any request for reserving a
region of memory outside the LMB memory map now returns an -EINVAL
error.
Certain places in the common code using the LMB API's were not
checking the return value of the functions. Checks have been added for
them. There are some calls being made from the architecture/platform
specific code which too do not check the return value. Those have been
kept the same, as I do not have the platform with me to check if it
causes any issues on those platforms.
In addition, there is a patch which refactors code in
lmb_overlaps_region() and lmb_can_reserve_region() so that both
functionalities can be put in a single function, lmb_overlap_checks().
Finally, a new patch has been added which checks the return value of
the lmb allocation function before copying the device-tree to the
allocated address.
Link: https://lore.kernel.org/r/20250617104346.1379981-1-sughosh.ganu@linaro.org
[trini: Rework arch/arm/mach-snapdragon/board.c merge]
Signed-off-by: Tom Rini <trini@konsulko.com>
